I just installed android head unit Isudar model H53 HO0923 but after 4 days got split on screen.
After asking some advice from maker the they sent me a firmaware to update but screen kept split in two after update.
Few days later the sent me a file for updating (but this time the content was only 1 file (abt 600kb).
After trying to update with this 1 file then the screen become blank but backlight of screen is on and all buttons on the side of screen are alson no function.
I asked again for advice but still no answer yet.
I have now clue about this problem anymore.
Note: I tried to install any firmware from Isudar but the screen remains blank.
Is anybody knows how to solve the problem to get the screen back to normal. At least until showing android logo in oder to see the progress when installing firmware, thanks a lot in advance
Related
I have seen several threads with issues similar to mine; however, none with this exact issue. Everyone seems to be running into trouble trying to install updates or flash the unit. This is not what happened in my case. I bought this Android Head Unit on Ebay a few months ago. It has been working just fine until a few days ago. It gave me an error message about "tw has stopped" or something similar. All I could do was press "ok" over and over again. It just kept popping back up. So, I left it alone, got where I was going and turned the car off. When I turned the car back on all the unit would do was either show a white screen, a screen with multi colored lines, or the boot up logo (Toyota symbol in my case) and then back to the white or multi-colored screen. It has gone to the "Android" logo a couple of times; however, never gets past that point. I hear static. That's it. I put a CD in and it ate it. Won't give it back. I've pressed the reset button. It just loops back to the blank screen with static. Sometimes it will boot all the way to the Android logo but no further. Most of the time the backup camera is not working. If the bootup gets to the Android screen, the backup camera will work. I emailed the Ebay seller and they said they were going to send me a file. When I asked when they were going to send me a file they said "Hello Friend, the Android 6.0 update is not ready yet". I emailed again and asked if they could just send me a file to restore the current version. I'm kinda stuck until they send me a file I guess. I don't really know exactly what version I have on there now. 4.4 I think; however, I know there is a lot more to it than that. I wish I'd made a restore file (if that's even possible). Also, there are no instructions as to how to get it to boot into recovery mode. I've tried lots of combinations of buttons, but I'm really just shooting in the dark here. Any helpful information anyone might have would be appreciated. I really have come to depend on the Navi and other functions. This unit fits right in my car and looks really slick. I was really enjoying having it until it quit working....
Hello guys!
I have Xtrons D714A with original ROM (4.4.4) and recently I installed Car Launcher on it. The next day when I powered up the unit again it showed a screen that I have to choose the default launcher for the unit. Anyway the problem is that the touch screen stopped working and I cannot choose anything. The strange thing is that the notification bar is working, I can even dial up the settings bar and enter in the menus, but once I enter there the touch screen does not work as well (it only works in the notification bar).
I tried to reset it trough the reset button but it only resets the settings, I need hard resset to erase Car Launcher. I also tried to turn on the unit while holding all kind of combinations of the hardware buttons but nothing happened - I think that the "power" button is not actually power button because when the unit was working the only thing it did is to get the unit in sleeping mode when I hold it.
I contacted Xtrons but no answer from them by now. Also I saw that I am not the first one with this problem :
http://forum.xtrons.co.uk/forum_posts.asp?TID=144139&PID=211052&title=problem-with-d714a
http://forum.xtrons.co.uk/forum_posts.asp?TID=143637&title=d714a-touchscreen-not-responding
Can someone help with this issue?
Thanks in advance!
Is there some script that I can upload on SD card and do a hard reset if I power up the unit with it? Or upload new ROM and install it from SD card by the same method, and if yes, can someone provide me ROM file?
@strballer try emailing Xtrons at: [email protected]. They usually reply within a day or two. They should send you a link with a firmware download as they did for my D717AL.
Thanks for your answer! I already contacted them and they suggested to turn off the main power for 15 minutes but as expected this done nothing but just reset the settings of the unit, not hard reset. Anyway I just managed to fix the problem. I connected USB keyboard and I was able then to dial the default home launcher. After that the touch screen was working again. Very strange bug...
zhekozhekov said:
@strballer try emailing Xtrons at: [email protected]. They usually reply within a day or two. They should send you a link with a firmware download as they did for my D717AL.
Click to expand...
Click to collapse
They told me there´s no firmware available. Did you mange to have Android 6 on your xtrons D717AL? Since it is sold with this now as far as I read somewhere. I stuck on 5.0
Hello everybody,
I bought a Bosion car radio in 4 / 64GB (px6/rk3399/2.0Ghz) version a month ago with dsp, and android 9.0 installed.
After 1 week, after ignition to on, it shows me the welcome picture, and after the android logo loading, and it runs in a loop.
After contacting the seller, he sent me the program to install on SD card with all the steps.
I followed everything step by step, then I insert the sd card and switch on the car ignition.
I briefly see the android logo and the screen goes black (the backlight remains on, the buttons on the side also light up with the headlights)
I don't know if it's a software problem or a hardware problem,
This is my first Android car radio and I'm a little lost,
If any of you can help me I would be grateful,
Thanx in advance
have a look here
https://forum.xda-developers.com/an...m32-rk3399-t4111653/post83142021#post83142021
RossMacgill said:
have a look here
https://forum.xda-developers.com/an...m32-rk3399-t4111653/post83142021#post83142021
Click to expand...
Click to collapse
Thanx !
I installed everything on the sd card, the update went well.
Only, now the car radio starts up, welcome appears for 5 seconds, a brief black screen appears and it goes back to Welcome on a loop.
AnthoG40 said:
Thanx !
I installed everything on the sd card, the update went well.
Only, now the car radio starts up, welcome appears for 5 seconds, a brief black screen appears and it goes back to Welcome on a loop.
Click to expand...
Click to collapse
Then I think you need to install the firmware at that point, I'm not sure as it's never happened to me
Sent from my GM1920 using Tapatalk
Hello Friends of the forum
Please I have a tesla type android kit mounted on Renault Talisman 2018.
Suddenly it began to stop loading the operating system, it only reached the logo of the brand and did not continue. I thought the solution would be to hit the Reset button, but this only made the situation worse. Now the screen is black. The other problem is that when it does not turn on, I do not know what its exact model is, or Android version.
It is very similar to this
https://www.belsee.com/belsee-best-...rade-for-renault-talisman-megane-iv-4-koleos- 2016-2020.html
Would someone be so kind to help me?
What would be the appropriate files for this model?
Thank you
I just purchased a px30 head unit advw9010.
It ran good for about 30 minutes and then the entire row of keys stopped working, i think the reset button is dead too.
When i went into factory setting the keymap does not recognize the key presses, when i went to exit it said it needed to reboot, during reboot my delay power may have turned off but not sure.
Now the system is stuck in boot loop
It displays the main start screen briefly, blinks the button lights 3 times and reboots after a few seconds.
Key combos and rst button does not seem to do anything as i expected.
Is there anyway to get this out of a bootloop? Or am i stuck with a $200 brand new paperweight. The seller is not being helpfull at all
post system info, MCU version and read through forums
The only info i can get is through the sale listing. The unit does not boot so i cant see the mcu info unless there is another way? Its a px30 quad core 2 gb ram 9" screen with android 10
I have been looking on forums the last few days but cant find any relevant info on my unit, and since the button row and reset doesnt work im stuck
Update:
The seller is finally helping out, i will get the firmware sometime overnight.
I dont think it will help with the row of buttons not working but i will update this accordingly and post the mcu and more details as soon as the systems back up and running