I just purchased a px30 head unit advw9010.
It ran good for about 30 minutes and then the entire row of keys stopped working, i think the reset button is dead too.
When i went into factory setting the keymap does not recognize the key presses, when i went to exit it said it needed to reboot, during reboot my delay power may have turned off but not sure.
Now the system is stuck in boot loop
It displays the main start screen briefly, blinks the button lights 3 times and reboots after a few seconds.
Key combos and rst button does not seem to do anything as i expected.
Is there anyway to get this out of a bootloop? Or am i stuck with a $200 brand new paperweight. The seller is not being helpfull at all
post system info, MCU version and read through forums
The only info i can get is through the sale listing. The unit does not boot so i cant see the mcu info unless there is another way? Its a px30 quad core 2 gb ram 9" screen with android 10
I have been looking on forums the last few days but cant find any relevant info on my unit, and since the button row and reset doesnt work im stuck
Update:
The seller is finally helping out, i will get the firmware sometime overnight.
I dont think it will help with the row of buttons not working but i will update this accordingly and post the mcu and more details as soon as the systems back up and running
Related
Hi,
I have a PX6 STM32 RK3399 - it was running the standard software that it was shipped with.
I did a 'Reset MCU' from the standard menu in my head unit to try and clear all the data from it. Unfortunately it didn't work. It started getting a corrupt boot logo then going blank. After many reboots it is now blank all the time. I can see the backlight is on, which goes off when use a pin on the reset button, but that is the most I get. I have tried holding down the reset button, trying to power/volume up buttons but nothing works. I had a look at the PX5 bricked thread, but I dont seem to have the pins which he has.
Are there any other ways to fix this? The USB doesn't seem to be powered/enabled.
Thanks.
Hi there,
After doing an upgrade my unit it stuck with a black screen and need to get into recovery mode in order to reload a working firmware.
Anyone any idea how to get there?
Tried the reset button for some time with and without home or on/off button and also removed the power source and pressed reset while putting power back but nothing seems to work
So i'm stuck for now :crying:
Any help?
Did you ever get your unit fixed? Did you try restarting with a USB plugged in with the firmware file on it?
No sorry... never got it working again. Had to send it back for a replacement unit.
I've been doing a lot of back and forth with their support on another issue and I've updated my MCU and software so many times now I thought maybe I'd be able to give you a hand.
Do you use any navigation apps on your Avant4? When I use ones that have voice navigation, the voice is getting truncated at the start and end of the directions. Some apps more than others and it seems to be related to those apps that use TTS (Text to Speech).
I'm using Waze via Android Auto. So i'm not having this problem.
So it runs from your phone and just displays on the Avant4? I have Waze running on the unit directly and it gets truncated.
I have al running on my phone and use a Android Auto box.
U can buy it from Avin USA. See website for all options on your Avant4.
wouterverboom said:
No sorry... never got it working again. Had to send it back for a replacement unit.
Click to expand...
Click to collapse
If you hold the volume knob until it starts blinking then let go and hold it down again it will boot the unit into recovery mode.
Hello guys. I picked up an A-Sure 9" touch screen head unit to put into my MK5 GTi. I got it as it was local and only 50 euro. Tested it at home, workes perfect, couldn't reset the system due to a password but little bit of googling got me 3368 code which worked!
Today I spent a good while downloading Spotify, Google Maps etc. To the unit. Set it up in the car, all going well. I had to turn the car key on/off a couple of times and the unit booted with the usual VW logo however a message underneath that said something like "system not started 3 times fully, will self-test and restar automaticallt". Aaaaand that's where I am now, can't get anything else out of it ?? Any help is apprreciated. Managed to get some screen when I held the vol up+down buttons, said API Active:3 and Intel Sofia 6 I believe? The wait here and nothing again.
What did reseller suggest to try and resolve?
Hello,
I have 2 head Units - both have the same issue of not rebooting when powered up. EACH UNIT freezes on the initial power up - none of the buttons work and the screen displays "Android". I have tried disconnecting power - left it on over night but nothing seems to allow it to engage past the initial power up.
Kianda Mfg. has been no help; their customer service is non-existent. I even tried to mail one of the units back to China and it got returned costing me an extra $140.
Looking to see if there is a firmware i can use to reset/ reboot the units. It is a rockchip rk3368:10/ QP1A. 190711.019/df11221744.
Thanks, Bill
Hello, i have a problem with my Joying Head Unit, i bought it 2 years ago and it worked well until one month ago when it didn t turn on and show only the google logo.
At the first time, i thought it was a minor problem and it will self repair, i let the head unit powered on for 2-3 hours and it didnt aolve anything but i got a message and it was ,,Corrupt!!! Reflash your device! Rescue Party!
Formatting /cache"
I ve contacted the seller and he didnt want to give me the firmware/software so i bought from a guy who gaved me a zip file and told me to download it and copy the zip file to usb and plug it in head unit and it will pop up a message to update. I ve tried all of this and i still didn't got any update or any window pop up. I want to mention that i tried to put all 5 fingers on the screen, hold reset button 15 sec, swipe left to right/right to left, hold power button and all of this didn't work. Any help or advice to solve the problems?