Hello everybody,
I bought a Bosion car radio in 4 / 64GB (px6/rk3399/2.0Ghz) version a month ago with dsp, and android 9.0 installed.
After 1 week, after ignition to on, it shows me the welcome picture, and after the android logo loading, and it runs in a loop.
After contacting the seller, he sent me the program to install on SD card with all the steps.
I followed everything step by step, then I insert the sd card and switch on the car ignition.
I briefly see the android logo and the screen goes black (the backlight remains on, the buttons on the side also light up with the headlights)
I don't know if it's a software problem or a hardware problem,
This is my first Android car radio and I'm a little lost,
If any of you can help me I would be grateful,
Thanx in advance
have a look here
https://forum.xda-developers.com/an...m32-rk3399-t4111653/post83142021#post83142021
RossMacgill said:
have a look here
https://forum.xda-developers.com/an...m32-rk3399-t4111653/post83142021#post83142021
Click to expand...
Click to collapse
Thanx !
I installed everything on the sd card, the update went well.
Only, now the car radio starts up, welcome appears for 5 seconds, a brief black screen appears and it goes back to Welcome on a loop.
AnthoG40 said:
Thanx !
I installed everything on the sd card, the update went well.
Only, now the car radio starts up, welcome appears for 5 seconds, a brief black screen appears and it goes back to Welcome on a loop.
Click to expand...
Click to collapse
Then I think you need to install the firmware at that point, I'm not sure as it's never happened to me
Sent from my GM1920 using Tapatalk
Related
Hello, I installed my new Px6 octacore radio and it's stuck on the Android boot logo. The only thing that works is the reverse camera then back to the boot logo.
The reverse camera always work 100% when I put the car in reverse but when I take off the reverse it always goes back to the boot logo.
I tried the reset button but the screen just turns black, then the welcome screen appears the android logo appears again but it gets stuck on the loop every time.
Here is the video of the radio in action or rather inaction:
youtu.be/0S2rdx_QYVM
the reverse camera works without android, so it works always despite of what the status of android is.
it seems you have an infinite bootloop, try to remove ALL power from the unit. turning your car on and off is not good enough, you'll need to remove the power connector (dinplug) from the unit.. wait for a while and plug it in the unit again. (or remove the positve lead from your car battery)
now try again..
if that does not work press the screen with 5 vingers during bootup..
if it still doesn't work, try tapping on the screen from first power on. it should say "detected" in the upper left corner.
if it says detected, you can try flashing new firmware.
dutchcommando said:
the reverse camera works without android, so it works always despite of what the status of android is.
it seems you have an infinite bootloop, try to remove ALL power from the unit. turning your car on and off is not good enough, you'll need to remove the power connector (dinplug) from the unit.. wait for a while and plug it in the unit again. (or remove the positve lead from your car battery)
now try again..
if that does not work press the screen with 5 vingers during bootup..
if it still doesn't work, try tapping on the screen from first power on. it should say "detected" in the upper left corner.
if it says detected, you can try flashing new firmware.
Click to expand...
Click to collapse
Thanks dutchcommando. I will try that right away and report back. Cheers.
dutchcommando said:
the reverse camera works without android, so it works always despite of what the status of android is.
it seems you have an infinite bootloop, try to remove ALL power from the unit. turning your car on and off is not good enough, you'll need to remove the power connector (dinplug) from the unit.. wait for a while and plug it in the unit again. (or remove the positve lead from your car battery)
now try again..
if that does not work press the screen with 5 vingers during bootup..
if it still doesn't work, try tapping on the screen from first power on. it should say "detected" in the upper left corner.
if it says detected, you can try flashing new firmware.
Click to expand...
Click to collapse
I tried all of your recommendations but no luck. I was not even able to get the detected message to appear on screen.
Strangest thing is that it worked fine the entire day until I installed the backup camera and put it into reverse for the first time. After that it never worked again.
I know you mentioned that the reverse camera has nothing to do with the android part but that's exactly when it locked up.
Hekg said:
I tried all of your recommendations but no luck. I was not even able to get the detected message to appear on screen.
Strangest thing is that it worked fine the entire day until I installed the backup camera and put it into reverse for the first time. After that it never worked again.
I know you mentioned that the reverse camera has nothing to do with the android part but that's exactly when it locked up.
Click to expand...
Click to collapse
do you have an external amp or powered antenna connected to the HU to?
it seems there is either a problem with a groundloop, or a hardware problem..
disconnect the camera from the HU (the power switch cable and the plug) and any other powered stuff, so you just end up with the head unit having 12V, ACC and GND, and give it a try again..
(i'm rooting for you!:laugh
dutchcommando said:
do you have an external amp or powered antenna connected to the HU to?
it seems there is either a problem with a groundloop, or a hardware problem..
disconnect the camera from the HU (the power switch cable and the plug) and any other powered stuff, so you just end up with the head unit having 12V, ACC and GND, and give it a try again..
(i'm rooting for you!:laugh
Click to expand...
Click to collapse
Thanks ducthcommando! The seller tells me that it's a bad motherboard and is willing to send me a new motherboard for me to replace but I'd rather get a new unit. Either way I'm going to try out what you told me by unplugging everything except the basic power plug and see if that works.
I'm weary of these android head units now. Do you have any good recommendations for single din PX6 units? Thanks.
good to hear the seller takes some action!
and no, i don't have any single din units to recommend..
the best of the best are cloned fast and easy, so if one says you need the blablabla 9X pro, and you do a search for it, you could well end up with a fake unit...
also there are way, way more knowledgeable people here who know trusted resellers and best brands..
Hi there,
After doing an upgrade my unit it stuck with a black screen and need to get into recovery mode in order to reload a working firmware.
Anyone any idea how to get there?
Tried the reset button for some time with and without home or on/off button and also removed the power source and pressed reset while putting power back but nothing seems to work
So i'm stuck for now :crying:
Any help?
Did you ever get your unit fixed? Did you try restarting with a USB plugged in with the firmware file on it?
No sorry... never got it working again. Had to send it back for a replacement unit.
I've been doing a lot of back and forth with their support on another issue and I've updated my MCU and software so many times now I thought maybe I'd be able to give you a hand.
Do you use any navigation apps on your Avant4? When I use ones that have voice navigation, the voice is getting truncated at the start and end of the directions. Some apps more than others and it seems to be related to those apps that use TTS (Text to Speech).
I'm using Waze via Android Auto. So i'm not having this problem.
So it runs from your phone and just displays on the Avant4? I have Waze running on the unit directly and it gets truncated.
I have al running on my phone and use a Android Auto box.
U can buy it from Avin USA. See website for all options on your Avant4.
wouterverboom said:
No sorry... never got it working again. Had to send it back for a replacement unit.
Click to expand...
Click to collapse
If you hold the volume knob until it starts blinking then let go and hold it down again it will boot the unit into recovery mode.
I just installed android head unit Isudar model H53 HO0923 but after 4 days got split on screen.
After asking some advice from maker the they sent me a firmaware to update but screen kept split in two after update.
Few days later the sent me a file for updating (but this time the content was only 1 file (abt 600kb).
After trying to update with this 1 file then the screen become blank but backlight of screen is on and all buttons on the side of screen are alson no function.
I asked again for advice but still no answer yet.
I have now clue about this problem anymore.
Note: I tried to install any firmware from Isudar but the screen remains blank.
Is anybody knows how to solve the problem to get the screen back to normal. At least until showing android logo in oder to see the progress when installing firmware, thanks a lot in advance
*UPDATE* Was able to find former employee who got me the files I needed.
We purchased a Ford Explorer with a RoadNav s160 M254. I am trying to get the firmware update, but Roadnav.com appears to be down. Are they out of business? Would anyone happen to have the last firmware update for this? Thanks!
jasondaniels said:
*UPDATE* Was able to find former employee who got me the files I needed.
We purchased a Ford Explorer with a RoadNav s160 M254. I am trying to get the firmware update, but Roadnav.com appears to be down. Are they out of business? Would anyone happen to have the last firmware update for this? Thanks!
Click to expand...
Click to collapse
Hello. Can you show me how to contact that employee? My S160 now stuck in bootloop
big.brother said:
Hello. Can you show me how to contact that employee? My S160 now stuck in bootloop
Click to expand...
Click to collapse
Turns out that they weren't an employee, just an enthusiast. Leigh in Austrailia, [email protected].
jasondaniels said:
Turns out that they weren't an employee, just an enthusiast. Leigh in Austrailia, [email protected].
Click to expand...
Click to collapse
Also, I was able to resolve the bootloop by completely killing the power connection and resetting the unit. Good luck.
jasondaniels said:
Turns out that they weren't an employee, just an enthusiast. Leigh in Austrailia, [email protected].
Click to expand...
Click to collapse
thanks you so much.
jasondaniels said:
Also, I was able to resolve the bootloop by completely killing the power connection and resetting the unit. Good luck.
Click to expand...
Click to collapse
Did your unit have a reset button somewhere, cant seem to find it on my unit..
Bal.Pen said:
Did your unit have a reset button somewhere, cant seem to find it on my unit..
Click to expand...
Click to collapse
No, there is no reset button. I disconnected the power connection and waited 10 min before reconnecting while holding the SRC Button and that reset the unit. I followed these instructions.
How to upgrade your firmware?
1 Download the RoadNav Android S160 firmware for your model here
2 Extract and Copy the files into the SD card and insert the SD card into the GPS Slot (it must be this slot)
3 Power OFF your radio (turn car key to OFF position)
4 Wait about 5-10 minutes for SRC light to go OFF
5 Hold the SRC button and turn car key to ON position. You should hear a beep, keep holding than it beep twice, then loose the source button.
6 Upgrade will start automatically.
7 After about 5 minutes a message at the bottom says Installation complete. BUT, that's not the end of the upgrade.
8 The radio screen goes black and beeps for 1 minute (this is normal, don't touch it !!)
9 After some more updates the "installation is complete please remove card"
10 Remove the SDcard and the radio automatically reboots.
Can be found here:
app.bettermobileapp DOT com/article/10209493/S160+-+Android+4.4.4+Head+Unit
Good luck. These units are a pain.
Hello Friends of the forum
Please I have a tesla type android kit mounted on Renault Talisman 2018.
Suddenly it began to stop loading the operating system, it only reached the logo of the brand and did not continue. I thought the solution would be to hit the Reset button, but this only made the situation worse. Now the screen is black. The other problem is that when it does not turn on, I do not know what its exact model is, or Android version.
It is very similar to this
https://www.belsee.com/belsee-best-...rade-for-renault-talisman-megane-iv-4-koleos- 2016-2020.html
Would someone be so kind to help me?
What would be the appropriate files for this model?
Thank you