So I'm on stock aqh3 firmware but I am rooted with magisk and have notorious kernel installed. Even though I have magisk hide to hide Netflix I'm still getting that error 5.2, am I missing something here? On my s6 aslong as had magisk hide enabled it worked fine.
Magisk 14 here btw
Bump
I'm currently running stock rom with Blu_spark kernel. I've been using magisk, lately updated to 14.3 version.
My problem is I can not pass SafetyNet check. Both ctsProfile and basicIntegrity are false.
I tried Universal SaftyNet Fix but it didn't help at all.
Is there any hope to pass it on stock rom?
Do you have Xposed installed?
Thanks, I completely forgot about it
The other safety net problem people are currently having with Magisk is that if you update Magisk within Magisk Manager some scripts needed to pass safety net are no longer installed by default. If you flash Magisk instead through TWRP it seems to install like normal and you don't need to perform additional steps to pass safety net.
Is anyone else having a -9 error on Netflix after getting the Widevine update?
btw the phone is rooted with Magisk on OB7, 4.0.5 doesn't seem to have this issue
Hi All,
I have been running Lineage OS since it became available for OnePlus 5 with the Safety Net successfully being passed using Magisk and using firmware and modems from jamal2367.
That was up until Lineage required an updated firmware/modem to 5.1.4 and I found jamal2367 has stopped doing the firmware and modem for the OnePlus 5. I installed the firmware from shadowstep the new firmware provider and now I fail the safety net checks.
I have tired the following:
Flashing multiple weekly releases of Lineage OS
Flashing new version of TWRP
Flashing new version of TWRP blu_spark
Flashing new version of TWRP codeworkx
Flashing the ElementalX-OP5-3.10.zip
Flashing Boeffla-Kernel-2.0
Flashing blu_spark_r132
Flashing OSS 5.1.4
Flashing OSS 5.1.5
all with Magisk 17.1 installed
All with full wipes including the sdcard
The only thing that worked was installing OSS 5.1.5 with and relocking the bootloader.
Does anybody know what I have missed and how I can get the Safety Net to pass the ctsProfile.
Thanks in advance.
alrighte_then said:
Does anybody know what I have missed and how I can get the Safety Net to pass the ctsProfile.
Thanks in advance.
Click to expand...
Click to collapse
Relocking the Bootloader will of course work but you didn't need to do that.
What you missed:
That version of Magisk is clearly not working well with your setup and not hiding your Bootloader state properly. (Providing you set it up correctly).
Had you done all those steps without Magisk it would have passed. The custom Kernels alone would have gotten you a Pass due to them ignoring the Verified Boot state.
So, LOS+Kernel = Pass. If you need Magisk, try to find a version that is working properly with your setup. With Magisk working properly the custom Kernel is then optional.
Also, TWRP has nothing to do with it. Just use the latest Codeworkx.
Hi Dirk,
Thanks for your response, I have just tied to install it in the order you suggested
I install TWRP (twrp-3.2.3-0-20180822-codeworkx-cheeseburger.img)
I wiped everything including sdcard
I installed Element Kernel (ElementalX-OP5-3.10.zip)
I installed Lineage OS (lineage-15.1-20180903-nightly-cheeseburger-signed.zip)
I installed Gapps (MindTheGapps-8.1.0-arm64-20180808_153856.zip)
I installed a safety net tester called safetyNet 'attest'
When I run the safetynet test I am still getting CTS profile match: false.
Any ideas what I can do next to make this work?
Thanks for any help
alrighte_then said:
Hi Dirk,
Thanks for your response, I have just tied to install it in the order you suggested
I install TWRP (twrp-3.2.3-0-20180822-codeworkx-cheeseburger.img)
I wiped everything including sdcard
I installed Element Kernel (ElementalX-OP5-3.10.zip)
I installed Lineage OS (lineage-15.1-20180903-nightly-cheeseburger-signed.zip)
I installed Gapps (MindTheGapps-8.1.0-arm64-20180808_153856.zip)
I installed a safety net tester called safetyNet 'attest'
When I run the safetynet test I am still getting CTS profile match: false.
Any ideas what I can do next to make this work?
Thanks for any help
Click to expand...
Click to collapse
You flashed the Kernel before the ROM, so you overwrote that Kernel with the LOS one. Flash LOS then the custom Kernel.
On Magisk.. i've seen many people complain that they can't get the latest version to pass Safetynet. Again, it could just be people not configuring it correctly, or it might be better to try the previous version. Just to make sure you should tell us what you do to set it up.
You need to Hide Play Store, Banking Apps etc, and Magisk Manager too i believe. If you install Magisk and set it up when your current state is 'Uncertified', you will need to clear Data/Cache on Play Store for it to change to 'Certified'.
Also, don't rely on 'Safetynet Checker' apps. If the Play Store settings say 'Certified' try an app like Google Pay. It should work fine.
If you get cts profile mismatch. Download CTS props config from magisk modules and you will pass
Download magisk 17.1
Hi All,
Just to give you an update one where I got to with this.....
You where right the newer builds of Lineage OS do not pass safety net but the older ones do.
So after much playing around I and many flashes and wipes I found it impossible to boot a Lineage with a custom kernel, I believe this is probably down to the forced encryption.
The thing that worked for me in the end was installing "MagiskHide Props Config" and changing the figure print, I am it is very similar to the module Jamie suggested.
So I now have Lineage OS working fully with root, magisk and passing SafetyNet
Thanks everyone for you help.
The thing that worked for me in the end was installing "MagiskHide Props Config" and changing the figure print, I am it is very similar to the module Jamie suggested.
So I now have Lineage OS working fully with root, magisk and passing SafetyNet
Thanks everyone for you help.[/QUOTE]
Hello; can you explain to me in detail, step by step, how to do it? Thanks in advance.
" changing the figure print"
As you see in the title, i can't pass SafetyNet on Magisk v16, stock ROM SL!M B10. I flashed bootstack>rom>disable dm verity script>magisk. I don't know what's the problem, i could pass SafetyNet with same setup and flashing process.
I think that somehow nodmverity script didn't worked. I get Not certified on GP too.
Btw it's the A2017G variant.
I appreciate every response to my issue.
Thank you.
Edit: It turns out that it was Magisk 16.0 issue, after i flashed 16.7 SafetyNet pass.
Third screenshot somehow didn't uploaded.