Related
Updated to 7.1.1 Beta. Flashed twrp. I then flashed magisk and then phh. I get stuck in a boot lop. I tried twice but each time I keep getting stuck in a bootloop. Does anyone have a work around? I've looked around and seems like everyone is getting it to work but me and a few others? Any help?
Not sure why you want magisk if xposed isn't supported on 7.0+ ? Just use superSU instead.
Edit: There is a (no longer a) benefit in using Magisk/phh, since magisk hide and using xpropset magisk module is detected by SafetyNet already, but see post below for the latest approach (if any):
http://forum.xda-developers.com/nexus-6/help/help-pass-safetynet-rooted-7-0-aosp-t3486834
suhide is not compatible w/ 7.1.1, so SuperSU is not an option for the 6P on the 7.1.1 Developer Preview
Flash magisk and phh su, works fine, but supersu get bootloop, something like this
7.1.1 with supersu (stable or sr1) boots fine, the problem atm is suhide, flashing suhide causes bootloops
Way possible, but without suhide is not very convenient, banks apps not working properly
So the latest superuser by chain fire works? Cause flashing magisk v8 then phh su just sends me to a bootloop.
I'm using magisk and the latest phh su on 7.1.1 and no issues what so ever even have it passing safetynet
All I did was flash the factory image, then two, then flashed phh su, magisk and then rebooted and installed xsetprop through magisk.
how are you getting this working? I haven't tested, but doesn't the 7.1.1 need a custom kernel to bypass safetynet? Kernel source isn;t out yet?
Trying to pass safetynet to use my banks app and pokemon go, using the latest LOS14.1
I tried going the Magisk way, but it still fails CTS.
Is there anyway to make it happen with root and passing safetynet?
You have to use Magisk for root. SuperSU and LineageOS's versions of root will not pass safetynet from my experience. I don't know if it helps but I also have the Play Store and Nintendo's games enabled on Magisk Hide.
eMadman said:
You have to use Magisk for root. SuperSU and LineageOS's versions of root will not pass safetynet from my experience. I don't know if it helps but I also have the Play Store and Nintendo's games enabled on Magisk Hide.
Click to expand...
Click to collapse
I used this guide and it didn't work. Is there another MagiskSU that I'm missing?
EDIT: I got it to work! In the guide above, it says to flash SU in Systemless mode. I just flashed Magisk without SU and it worked! Thanks!
You need Magisk v12 and kernel that includes bootloader status patch. I'm using old version of AX7Kernel, but Beastmode also has it. Not sure about other ones. I'm running relatively recent build and using Android Pay pretty frequently.
@edit And make sure to enable Magisk Hide
Just upgraded from B19 to B25 via DrakenFX's zips, and it looks like Magisk has stopped working. I've tried uninstalling and re-installing the zip, but it looks like the superuser app just crashes after prompting for permission. Magisk thinks there's root, but its logs just end with "phh: starting su daemon." (And, of course, safetynet fails). I'd upload a screenshot, but I can't . I'm trying to use Magisk v10.3-beta2 with 17 me.phh.superuser cm-su topjohnwu.
Anyone figured this out, or found another way to get Android Pay working with an unlocked bootloader?
Thanks!
Apparently there is no functional Magisk for stock nougat. You can use 10.2 on MM or 12 on one of the custom (non stock based) nougat roms.
Actually, I did manage to get Magisk 10.3-beta2 working on B19 nougat, so I assumed that it'd work on B25. Looks like that's not the case, though.
That version of Magisk works for me on b25. Three green lights. What version of Magisk manager are you using? I have 4.3.3.
StickMonster said:
That version of Magisk works for me on b25. Three green lights. What version of Magisk manager are you using? I have 4.3.3.
Click to expand...
Click to collapse
Care to share the version of Magisk you have working?
Actually, looks like Magisk 12 works well enough to hide the bootloader on B25, which is all I really wanted, anyways .
lukanite said:
Actually, looks like Magisk 12 works well enough to hide the bootloader on B25, which is all I really wanted, anyways .
Click to expand...
Click to collapse
I want to run magisk so I can use android pay, I'm rooted, on stock nougat, unlocked BL. I've found very little axon 7 specific threads, so just wondering are there any gotcha's? Is it like TWRP where you need a version built for the phone?
thanks
If you're rooted already, I'm not sure if Magisk 12 is going to work, since Magisk Hide only hides MagiskSU. I'd try looking into the guide for Magisk 13, starting from no root, which might be able to get you root with Android Pay
lukanite said:
If you're rooted already, I'm not sure if Magisk 12 is going to work, since Magisk Hide only hides MagiskSU. I'd try looking into the guide for Magisk 13, starting from no root, which might be able to get you root with Android Pay
Click to expand...
Click to collapse
Hey, thanks for getting back. Actually I ended up removing supersu, flashing stock boot & system, then installing magisk again. Now I get the same as your screenshot, but the "rooted but no root permission" result.
Do you know how to fix that?
Aside from trying Magisk 13, that's where I ended up getting stuck, so I think that's just how things are with Magisk 12/10.3.
lukanite said:
Aside from trying Magisk 13, that's where I ended up getting stuck, so I think that's just how things are with Magisk 12/10.3.
Click to expand...
Click to collapse
Oh, ok, thanks. I'll try 13 I guess
Unfortunately it seems like 13 has similar behaviour .. it doesn't complain, but I don't seem to have root access, and on top of that the app crashes here and there. :/ I guess I may have to forego android pay for a little while.
Just like the topic says. I'm currently running Magisk 11.6 and was told not to install or upgrade to v 12 since it was buggy. Well it looks like v13 is available (13.1 actually). Is this safe to upgrade?
Rom: NATF 4.0 for H910 (AT&T) - Android v7.0
Sidenote: What is preventing SafetyNet from passing (CTS Profile mismatch) ? Is the due to the DirtyCow exploit? Debugging is disabled and Magisk hide is on.
is definitely safe if you have a US996 variant of the LGV20 as I'm using it on that... about to try it out on my H918 variant of the LGV20, but should be fine with since I went through all the betas fine
I flashed 13beta on my h918 without doing anything special and it works just fine
Well I took the advice and upgraded. It didn't go so smooth. The update feature within Magisk manager didn't work. First it didn't let the device reboot. I had to pull the battery since all the shutdown commands did nothing.
2nd time trying to upgrade, it rebooted this time and when I checked the manager again it said magisk wasn't even installed. So I manually got the zip and updated in recovery and then manually installed the latest apk for the manager and finally I'm up to date. All is well (aside from safetynet).
When switching to Magisk 13.1 from anything lower you should use the magisk uninstaller before flashing the newer Magisk . Anything lower than Magisk 13 is not compatible with the newer v5 Magisk manager as far as I know.
shadavis08 said:
When switching to Magisk 13.1 from anything lower you should use the magisk uninstaller before flashing the newer Magisk . Anything lower than Magisk 13 is not compatible with the newer v5 Magisk manager as far as I know.
Click to expand...
Click to collapse
I completely overlooked the uninstaller. I don't know how, I just did.
Updated to 13.2 and SafetyNet seems to pass now. Although I'm still "Uncertified" in the Play store.
Well goddamn, it must be working because I was able to get Google Wallet to work and Android Pay lets me add a card, although it says my card is not supported. I don't have a second card currently to test it. Maybe I need to enable it on the banks end. I'll call them tomorrow and ask.
Edit: Nope. It's my bank, not the card.
I am planning to eventually root the stock rom of SM-T580 to use AdAway and Greenify.
What sort of problems / side effects if any might I run into after rooting the stock rom?
Also I do not plan on using SuperSU as I will be using Magisk.
Some apps can not be installed anymore. (Netflix from playstore, super mario). Magisk does not prevent this. Use a browser with an ad blocker.
bert73 said:
Some apps can not be installed anymore. (Netflix from playstore, super mario). Magisk does not prevent this. Use a browser with an ad blocker.
Click to expand...
Click to collapse
Not even with Magisk hide enabled?
Not on my tab s2 with magisk.
Netflix working fine here with Magisk 13.0 and Stock Android N. But on my OnePlus One Netflix isn't available even with Magisk.
Shadowghoster said:
Netflix working fine here with Magisk 13.0 and Stock Android N. But on my OnePlus One Netflix isn't available even with Magisk.
Click to expand...
Click to collapse
When updating Magisk is it better to use the uninstaller zip and flash Magisk again or is using the built in updater fine?
You can't go wrong any way you use magisk. Mostly everything can be flashed directly from magisk. Remember magisk is root and has control. You won't have any problem updating magisk right from it's interface. The only time I've had a problem, has been from flashing a magisk module that doesn't support my device. Best regards.