Dear forum members,
i've a problem with a SM-T580. The PIT partition information is missing and i can't flash it together with new rom using ODIN, because the FRP lock is ON. This wy i'm totally stuck!!! I can't flash PIT file because of the FRP lock and i can't get rit of the FRP lock because i can't flash a PIT file
Who of you bright minds comes with a working solution for my problem..... i would be very grateful.
Thank you for your feedback and hopefully working solution(s)
-Regards,
Mark
Hi together,
any news on this one? I have exactly the same issue. And I never rooted or OEM unlocked my T580. I just applied the official Samsung updates until Android 8.1. But I rarely used the tablet so the battery probably was empty for a long time. A couple of months I wanted to use it again and charged it up and Android wouldn't start anymore. I have rooted and used ODIN and TWRP on my old S2 and S5's to flash LineageOS, so I know my way around, but now I also have the "PIT partition information missing + FRP lock issue" as described by Mark. Most posts claim you just need to find the right/matching stock ROM version, but I have tried all version from 6.0 up to 8.1 matching my german localization (DBT) but none of them work. Also it doesn't really make sense, since the partitions cannot be accessed without a correct partition table.
So... who is smarter than us ;-)
Here the Info from the ODIN DOWNLOAD screen (Home + Volume down + Power)
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-T580
CURRENT BINARY. Samsung Official
FRP LOCK: ON
Secure Download : Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:5 K:2 S:3
Thanks for any help,
Kalle
You will find the pit.file , if you unzip the CSC.img of original Stockrom.
Related
Hi all,
Please bear with me, I'm in way over my head here and don't understand most of what I've done. I was experimenting when I probably shouldn't have been.
So, I installed DarkLord's Note 7 kernel and rom. I found it to be quite buggy and am now wanting to wipe my phone and install Phronesis-N9005-N7-v6.0.
Problem is, when trying to boot into TWRP, I'm met with the the following:
ODIN MODE
Product name: SM-N9005
Current binary: Custom
System status: Official
Reactivation lock(kk): Off
Knox Kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: Enable (csb)
Rp swrev: S2, T2, R2, A3, P3
Write protection: Enable
UDC start
Downloading...
Do not turn off target
I've had it on for hours and it didn't do anything.
I managed to reboot it and it ran as it did before, in Darklords rom.
I read I have to install the official firmware and install it via Odin but I can't find anything about my device. On the back of it, it says:
SM N9005
FCC ID - A3LSMN9005
SNN - N9005GSMH
When I enter it into sammobile, nothing comes up.
Have I got this wrong? Should I be looking for something else?
You are booting to download mode not recovery .
Boot to recovery TWRP
#N9005 model firmware are on sammobile etc.
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Booting into recovery via TWRP manager just results in the same Odin screen for me
As for the firmware - I'm not really sure which region I should pick out of those. I just thought this was an international model, but then I downloaded an app called Phone INFO and it tells me it's Vietnam. Could this be because of the rom already on there? It does also say it's a Note 7, so I'm assuming it's incorrect.
TWRP manager
DO NOT USE just boot to recovery via the vol up home and power buttons as normal .
Copy Phronesis to ext sd card and flash as per instructions .
You have N9005 Pick your area /network where you are .
Phone Info can only go by what's on your phone and you flashed DarkLord's Note 7 firmware .
Booting via manager was a last resort. I was trying the usual way and it also resulting in the same thing.
Boot to download/ Odin mode flash stock rom .
Thanks JJEgan, I figured out how to use Odin3 and Odin mode, then install Phronesis. All is good now
I have this S7 Edge Verizon which a few days ago gave me a problem. I was using the phone just for a few days.While using it, social media normal stuff it self restarted ( notice that it was pretty hot, but it's a usual thing at this point ) and it got stuck in logo.
P.S: I am really familiar with this kinda stuff because I work at a phone service.
So I tried the usual stuff, wiping cache and data but it didn't solve any thing. So I decided to flash official rom. I downloaded the oreo rom from sammobile and when I tried to flash it, it just skipped all files. I thought this would be due the verizon model, because it's bootloader was locked and oem unlock wasn't enabled. I tried to flash the firmware without the bootloader and with pit but no result. Than I decided to enable oem unlock throught combination file.
When I downloaded combination file, at the website it said G935V but it actually was G935A, and somehow it flashed successfully without any problems. But after reset the phone was stuck at the very first Samsung Logo with some cpu and voltage information at the top left corner with a warning saying RPMB provisioned.
At this point I thought I might as well flash the stock firmware again but this time I got bootloader error and trying to flash it without a bootloader it would skip all files saying something like " skipping all binary files " as before. Bare in mind that during all this testing the phone got really heated. So I let it cool for a while and still nothing happened. Than I decided to flash this boot_root file I found and it actually booted up the Combination Rom. I enabled usb debugging in the settings but there was no Oem Unlock option, not even grayed out ( maybe because the rom G935A does not have the option ).
Even the USB debug enabled it still couldn't flash stock rom because of bootloader error and some binary error also and again if i didn't include bootloader it would skip all files.
I was thinking of installing a custom rom but I found out that there is not twrp avaible for s7 edge verizon because of it's locked bootloader. And if I try to install supersu through adb it just doesn't work.
Now my download section looks like this
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON (don't worrie about it, i got all the gmail info)
WARRANTY VOID: 0x0 (the warranty has expired anyways)
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B5(2, 1, 1, 1, 1 ) K1 S4
SECURE BOOT: ENABLE
IDOQ : G(42), S(12) mA
CPU SERIAL NUM : 0x1408501f
Fused open loop voltage: 970mV
RPMB PROVISIONED
The Samsung first boot up screen still has the RPMB PROVISIONED with the cpu information and also the custom flagg and I am able to boot up the combination rom.
I also tried to flash the official rom with z3x but it didn't solve anything. If you need any additional information just tell me. Any help would be greatly appreciated.
You need to download official firmware from another source. I recommend updato.com.
https://updato.com/firmware-archive-select-model?record=4F3A1B13706611E89F15FA163EE8F90B
You need to flash the latest Oreo firmware for the Verizon SM-G935V because it sounds like your phone has issues with your current bootloader. Go back to the Verizon firmware first and see if the phone works normally. Also, flash the regular CSC file not CSC_HOME.
Help
I too have the same exact problem. Has anyone figured out how to fix this?
Hi recently I believe I soft-bricked my Galaxy S8 SM-G950U I was having trouble getting service on it, It would only work on like major roads so I knew something was wrong with it so I tried to get the device fully updated and everything by going in the setting menu in Android and doing it from there It still was doing the same issues. So I went about restoring it with OEM firmware with Odin, everything worked when I restarted it, it was running more smoothly and everything. So since I achieved doing that I was like might as well root it so I installed firmware in Odin then everything messed up I couldn't get into my boot-loader anymore. So I reflashed the stock files that originally worked at first and I was having the same issue. In the bootloader it's on a blue screen I see no command for a second and then it goes to installing updates and the screen keeps on flashing. I believe it's because I reflashed a firmware that had a loader bootloader I believe it was the v2 bootloader. I need the v3 bootloader for ATT galaxy I can't find it on any site preferably all the Odin files needed. Please any expert let me know if you experience this thanks!
DOWNLOAD MODE
CARRIER : ATT
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
FRP LOCK : ON
WARRANTY VOID : 0x0
QUALCOMM SECUREBOOT : ENABLED
RP SWREV : B5(2,1,1,1,1) K4 S5
SECURE DONLOAD : ENABLED
DID : 205EA46632FD
Hallo,
I got a Galaxy S4 (GT-I9505) from a friend of mine. He did'nt know, what happens. The phone became very hot, made vibration-Noise and was not able to start it anymor.
I also tried to start the phone, but it got a boot-Loop.
So I thought to reflash the phone.
I am able to start the Download-Menü (Vol - + Power + HOME). The Recovery-Menü did not start finally. It hang.
So first I wanted to put an original Samsung-ROM to the Phone. But where can I get the right one?
On the sticker in under the accu is written:
Model: GT-I9505SSN: -I9505GSMH
When I start the Download-Modus and connect it with ODIN, I can read the following:
ODIN MODE
Product Name: GT-I9505
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0KNOX WARRANTY LOCK: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enable
I searched this forum and the net, but I did'nt get a Firmware-Image, the I was able to flash finally with ODIN to the phone.
I start ODIN with ADMIN-Rights and the KIES-App is deletet from the processes. The Samsung-USB-drivers are installed and the phone was found in ODIN.
Could anybody of You give me a way-sign where I have to read the solution of the problem? Or could anybody of you explain the process of flashing?
THanks a lot for your help.
with best regards
speedy8 said:
I searched this forum and the net, but I did'nt get a Firmware-Image, the I was able to flash finally with ODIN to the phone.
Click to expand...
Click to collapse
Sammobile.com for the firmware. Unzip the firmware, select "AP" in Odin, and point to the extracted tar.gz image. Odin should then flash the image.
Hi and thanks for reading this,
I received a SM-T580 from my grandson, he was playing with it experimenting some hacking
but seems he bricked the tablet , and I do not know what he was trying to do,
and in fact he does not know either.
Now i'm in a situation that the tablet does not boot, can not power off, it just goes straight to downloading page,
and I can go to odin mode pressing home, vol- and power.
In odin mode I have:
download speed: fast
product name: sm-t580
current binary: samsung official
system status: custom
reactivation lock: off
crom service: on
secure download: enabled
warranty void: 0 (0x000)
rp swrev: b:6 k:3 s:4
I have try to install stock firmware but i got bootloader error,
in fact the newest firmware has bootloader 5,
installing only AP stops at system.img after few seconds.
I do not know how to go out from this situation,
just hope in your help.
many thanks
old uncle
fixed by @hainguyenthao