Hi,
I want to connect an ethernet otg cable on my S7 edge. I got it to run with terminal emulator. I entered the commands on my pc and the phone was connected over adb shell. But this method is not for serveral times, its annoying always enter it again.
I want a comfortable menu as the S8, S9, ... has. My idea was to install a modified S8 or S9 rom. The installation was successfull, but I still have no ethernet menu. Can someone help me? I have found a thread here where someone claims, ethernet works fine with S9 rom. But I cant find it anymore.
I have the solution. Just install FloydQ custom rom for S7 / S7 edge and you have the ethernet tab in "more connection settings". I am wondering that this issue isnt discussed much.
Related
Hello guys,
my Samsung S7 edge SM-G9350 is not recognised when I connect it to my pc or my mac. I've already installed adb drivers, samsung kies and smart switch but none of these worked. Also I change the connecting mode of the phone (from USB storage to media device, etc). Also I have tried with different cables, not luck.
With my old Samsung S6 everything works fine!
Anyone with the same mode had any luck connecting it to a laptop? I am wondering if that is specific to the Chinese version.
Thanks for helping!!!!
Hey I just lost my s7 and got myself the s5 neo (Canadian variant) along with tab E. (T377W) cant let myself go through a fourth s7 in 3 months!
Forgetting methods used for my s5's in the past I cannot seem to find a root method WITHOUT PC or INSTALLING CUSTOM RECOVERY W/O PC. I hope some one can help me achieve either or without going near a computer.
Things I have at my disposition:
-s5 neo (G903W)
-galaxy tab e (T377W)
-OTG USB to micro USB adapter
-possibility to connect tab to s5 and IDEA OF ROOTING PHONE VIA OTG CONNECTION TO TABLET
Any help is greatly appreciated!
I have the samsung USB drivers installed on my windows 10 cpu and every time I plug the phone in, I get the dreaded USB not reconized notification. The drivers have been uninstalled and re-installed with no luck...tried USB debugging in developer options and no luck. Tried installing kies and smart switch but get the dreaded application failed to start...side by side configuration message appears for both.
This is a stock non rooted Telus S7 Edge that was carrier unlocked so I could switch to Tmobile here in Canada. (Way cheaper plan).
Phone works except for being not reconized.
I am wanting to root, so I can use the bluetooth internet tethering option that is not available with a stock Telus rom.
Any help would be greatly appreciated..?
Go to C\Windows\INF
Look for wpdmtp and wpdmtphw files,right-click on them and click on install.
Thanks to Microsoft for making simple things difficult..........
Thank you....worked liked a charm!!?
Oops...spoke to soon..pulling my hair out here?? I get the same message still...even tries on another windows 10 cpu with different USB cable..same results??
Hello!
I've go problem with connection to Remote Controller for phantom 4 pro. Remote Controller has USB host and I connect it tablet. There is too fast disappearing popup with question which USB app to run and i can't click OK. It not need USB debug.
The only solution is reboot tablet with connected USB and when it boot pop-up won't disappear and i can click OK and it works fine.
Popup title: "Choose an app for the USB device"
I have root. I tried MTP Enabler. Changing usb mode from mtp to ptp or rndis show popup for a 0.5 second.
How to solve this problem (dsiappearing popup)? There is any permission that i can set? How to debug it, is there any logs?
tosiaczus said:
Hello!
I've go problem with connection to Remote Controller for phantom 4 pro. Remote Controller has USB host and I connect it tablet. There is too fast disappearing popup with question which USB app to run and i can't click OK. It not need USB debug.
The only solution is reboot tablet with connected USB and when it boot pop-up won't disappear and i can click OK and it works fine.
Popup title: "Choose an app for the USB device"
I have root. I tried MTP Enabler. Changing usb mode from mtp to ptp or rndis show popup for a 0.5 second.
How to solve this problem (dsiappearing popup)? There is any permission that i can set? How to debug it, is there any logs?
Click to expand...
Click to collapse
Install the official Lineage 14.1 ROM. It works great and fixes the USB sometime issue with DJI Go 4. You won't regret it. Everything works including fingerprint reader. DJI Go works great, even when recording screen with DU Recorder. I used to see overheating messages on the Samsung firmware, but no issues with Lineage.
how to install lineage on t719? It is fo r @nswenson
There is no lineage for version with LTE. There is the same partition table? Bootloader?
Lineage is for Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi) - T713
We need it for Samsung Galaxy Tab S2 8.0 LTE (2016) (gts28velte) T719
I would be interested in this as well, as I have the same issue with my DJI RC.
I also have the Galaxy Tab S2 8.0 LTE (SM-T719Y).
Please help ...
Yt2...
---------- Post added at 06:46 PM ---------- Previous post was at 06:45 PM ----------
Would it be worthwhile reloading Nougat again???
Yt2...
After homework I have found a way to connect.
Start RC.
Start Aircraft.
Plug in pad (yes you will get the flashing screen).
Turn off the RC.
Turn back on RC.
All should be good.
Thai will have to do until Samsung or Android does an update...
This is not working - there is no video, fake connection.
You have to restart tablet with connected RC.
I just flew with mine today using the above method.
It is a pain in the butt but it will have to do until Android do a fix.
I have turned on developer mode.
Chris
Same problem here, only fix I can find is to reboot the tablet once rc and rpas are on. Pain in the butt but still better than being forced to use apple!
Hi Guys,
I have successfully downgraded my SM-T719Y LTE (Version 2) Tab S2 to Android 6.01.
Back to normality again with no hassles. Yippee.
I will post links shortly...
Yt2...
Turn everything COMPLETELY off. Power up RC and then the Mavic. Let them connect. Then plug in the USB cable and fire up the S2. Should load the Go 4 app directly and you should be up and running. If not just start the app after the tablet has fully booted. You have to do this every single time though.
Hi did you tried LineageOS 15.1 with DJI GO4 ?
donrosko said:
Hi did you tried LineageOS 15.1 with DJI GO4 ?
Click to expand...
Click to collapse
Installed yesterday, it works fine, USB can be inserted and removed as long as desired. I will test further.
Good afternoon,
I am trying to root my Galaxy s7 edge: G935F or my Galaxy tab A 2016: T580 with odin, but both aren't being recognized by my Windows 10 computer. They do charge but don't seem to recognize my computer either. However my computer does recognize my Galaxy s5 neo and my Galaxy A5 2017. I've searched a lot and tried everything i found.
Which involves:
Different computers, ports, cables; and I consistantly get te same error.
Original cable
manualy install drivers, removing all usb drivers and reboot computer.
factory reset
Enabling developer options, usb debugging and usb configuration is set to Media Transfer Protocol.
I switched off selective usb interruption in my computers power management and dissabled quick boot.
Are there other things I could try, to make the computer recognize my S7 edge or Tab 2016. The only thing I could find, is that the ports of the devices itself are broken. Since both devices behave and charge normally I doubt this really is the case.
Since my main goal is to get one of the two rooted, maybe someone knows a way to do this without the use of a usb connection. I geuss one-click root methods don't work on these devices and I wasn't able to find something trough micro sd or a wireless option.
Thank you in advance
Jobiscky said:
Good afternoon,
I am trying to root my Galaxy s7 edge: G935F or my Galaxy tab A 2016: T580 with odin, but both aren't being recognized by my Windows 10 computer. They do charge but don't seem to recognize my computer either. However my computer does recognize my Galaxy s5 neo and my Galaxy A5 2017. I've searched a lot and tried everything i found.
Which involves:
Different computers, ports, cables; and I consistantly get te same error.
Original cable
manualy install drivers, removing all usb drivers and reboot computer.
factory reset
Enabling developer options, usb debugging and usb configuration is set to Media Transfer Protocol.
I switched off selective usb interruption in my computers power management and dissabled quick boot.
Are there other things I could try, to make the computer recognize my S7 edge or Tab 2016. The only thing I could find, is that the ports of the devices itself are broken. Since both devices behave and charge normally I doubt this really is the case.
Since my main goal is to get one of the two rooted, maybe someone knows a way to do this without the use of a usb connection. I geuss one-click root methods don't work on these devices and I wasn't able to find something trough micro sd or a wireless option.
Thank you in advance
Click to expand...
Click to collapse
Hi there, installation of samsung usb drivers is easy. Please remove existing installation files on pc and install from provided link while the device connected to the pc during install and good internet. You should have no problem. I've done it on several machines
https://www.mediafire.com/file/gyp6fdl1wqbs8dz/SAMSUNG_USB_Driver.exe/file
Thanks for your response. I've already tried that several times. Just to be totaly sure i've tried it again with the link you've provided and sadly it didn't work. The thing is that the samsung a5 2017 and the samsung s5 neo, do connect. But the samsung s7 edge doesn't. Not even on a different computer, with Win 7. Just now I did a factory reset, again. And also tried to boot in safe mode. But it just doesn't work. Do you have other idea's?
Jobiscky said:
Thanks for your response. I've already tried that several times. Just to be totaly sure i've tried it again with the link you've provided and sadly it didn't work. The thing is that the samsung a5 2017 and the samsung s5 neo, do connect. But the samsung s7 edge doesn't. Not even on a different computer, with Win 7. Just now I did a factory reset, again. And also tried to boot in safe mode. But it just doesn't work. Do you have other idea's?
Click to expand...
Click to collapse
It's not your computer obviously. Maybe the cable port on the s7e is broken or something. Or the drivers aren't getting properly installed on the machine. The com port used by odin doesn't require drivers to be installed separately for each device. So if other devices get recognized by Odin, it clearly means that your s7e requires some hardware replacement. You may try connecting another device of the same model
I have the same problem before. My s7 doesnt work fast charge and pc dont recognize and my phone charging 6 hours. Windows gives yellow error and doesnt recognize my phone. I try different cable and pc but doesnt work. I change my motherboard and it works
nereloyka13 said:
I have the same problem before. My s7 doesnt work fast charge and pc dont recognize and my phone charging 6 hours. Windows gives yellow error and doesnt recognize my phone. I try different cable and pc but doesnt work. I change my motherboard and it works
Click to expand...
Click to collapse
Whaaat?? Change the motherboard