Database Users

[Q] ROOT problems / Flashing impossible

What should I do to really have a " completely rooted N9005" ???
I need some suggestion of the "experts" about the fact that my SM-N9005 , that " seems to be rooted " ( and this is confirmed launching the app " root checker" and obtaining the result " This device has root access" ...) ...but , despite this apparent status , it provides me the following issues :
a) I cannot use CWM mode to flash any new ROM nor any other patch using .zip file ; when I try to do a flash , using the option " apply update from external storage" as in this options list :
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
it seems to start to flash but after few seconds I obtain a RED message in the bottom oif the page , like :
" E:signature verification failed"
and in yellow
--Appling Multi-CSC ...
Applied the CSC-code : XTC
Successfully applied multi-CSC
install from sdcard complete
But in reality anything happen , the sistuation is exactly the same as before ...
b) I cannot do any back up ( EFS nor other kind of back up ) ; so , every time I try to flash even using MOP ( it works, but even MOP seems to have some problem..) I get a new ROM installed but with problems... sometime the phone is blocked with the " samsung logo and the Blue led" and I need to restert it with ODIN .....and I need to reinstall all in manual mode
in order to provide to the experts additional info , here are other details
AP : N9005XXUDMJ7
CP: N9005XXUDMJ7
CSC : N9005XXDMJ4
kernel 3.4.0-201940
[email protected]#1
Wed Oct 30 16:51 ....
Build version
JSS15J.N9005XXUDMJ7
in download mode:
ODIN MODE (in red)
Product name : SM-9005
Current Binary : Samsung Official
System Status : Custom
Reacxtivation lock : OFF
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x1
Qualcom secureboot : NONE
AP SWREV : S2,T2,R2,A2,P8
Write protection : Enable
I would invite everybody able to provide any suggestion to propose some verification or even ask me any additional info to find the way to use a rooted phone as was used to do with other phones before = flash roms without this problem
Thanks in advance for any contribution

tower5 said:
What should I do to really have a " completely rooted N9005" ???
I need some suggestion of the "experts" about the fact that my SM-N9005 , that " seems to be rooted " ( and this is confirmed launching the app " root checker" and obtaining the result " This device has root access" ...) ...but , despite this apparent status , it provides me the following issues :
a) I cannot use CWM mode to flash any new ROM nor any other patch using .zip file ; when I try to do a flash , using the option " apply update from external storage" as in this options list :
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
it seems to start to flash but after few seconds I obtain a RED message in the bottom oif the page , like :
" E:signature verification failed"
and in yellow
--Appling Multi-CSC ...
Applied the CSC-code : XTC
Successfully applied multi-CSC
install from sdcard complete
But in reality anything happen , the sistuation is exactly the same as before ...
b) I cannot do any back up ( EFS nor other kind of back up ) ; so , every time I try to flash even using MOP ( it works, but even MOP seems to have some problem..) I get a new ROM installed but with problems... sometime the phone is blocked with the " samsung logo and the Blue led" and I need to restert it with ODIN .....and I need to reinstall all in manual mode
in order to provide to the experts additional info , here are other details
AP : N9005XXUDMJ7
CP: N9005XXUDMJ7
CSC : N9005XXDMJ4
kernel 3.4.0-201940
[email protected]#1
Wed Oct 30 16:51 ....
Build version
JSS15J.N9005XXUDMJ7
in download mode:
ODIN MODE (in red)
Product name : SM-9005
Current Binary : Samsung Official
System Status : Custom
Reacxtivation lock : OFF
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x1
Qualcom secureboot : NONE
AP SWREV : S2,T2,R2,A2,P8
Write protection : Enable
I would invite everybody able to provide any suggestion to propose some verification or even ask me any additional info to find the way to use a rooted phone as was used to do with other phones before = flash roms without this problem
Thanks in advance for any contribution
Click to expand...
Click to collapse
try this flash with odin http://forum.xda-developers.com/showthread.php?t=2567283

I does not work.....
jaythenut said:
try this flash with odin http://forum.xda-developers.com/showthread.php?t=2567283
Click to expand...
Click to collapse
first of all , thanks for your support
but I tried , without success , to flash this with odin ; ( I used odin 3.04 ) ; it remains " waiting" for a very long time ( 15 minutes..) without any action , any flash....
I did the test twice, same result....
Any other suggestion?
what could I do to do a deep cleaning of some wrong setting ?

tower5 said:
first of all , thanks for your support
but I tried , without success , to flash this with odin ; ( I used odin 3.04 ) ; it remains " waiting" for a very long time ( 15 minutes..) without any action , any flash....
I did the test twice, same result....
Any other suggestion?
what could I do to do a deep cleaning of some wrong setting ?
Click to expand...
Click to collapse
Strange that your phone shows "Qualcomm Secureboot: None"
In other phones it should be "Qualcomm Secureboot: Enable (CSB)"

tower5 said:
...
in download mode:
ODIN MODE (in red)
Product name : SM-9005
Current Binary : Samsung Official
System Status : Custom
Reacxtivation lock : OFF
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x1
Qualcom secureboot : NONE
AP SWREV : S2,T2,R2,A2,P8
Write protection : Enable
...
Click to expand...
Click to collapse
Your phone seems to have a peculiar setting on secureboot + SWREV configuration, and also seems to be on the (original ?) XTC (Philippines) CSC.
One of the things that I would try (given that your knox is already 0x1) would be to change CSC and write BTU MI7 firmware (and eventually check if CSC actually changed from XTC to BTU). After that you should try again writing Philz recovery.
Another thing to check would be your current bootloader version (and also the bootloader after you write BTU MI7 firmware), the command in adb is:
adb shell getprop ro.boot.bootloader
(or just "getprop ro.boot.bootloader" in a terminal prompt directly on the phone).

I found the solutions !!!!
xclub_101 said:
Your phone seems to have a peculiar setting on secureboot + SWREV configuration, and also seems to be on the (original ?) XTC (Philippines) CSC.
One of the things that I would try (given that your knox is already 0x1) would be to change CSC and write BTU MI7 firmware (and eventually check if CSC actually changed from XTC to BTU). After that you should try again writing Philz recovery.
Another thing to check would be your current bootloader version (and also the bootloader after you write BTU MI7 firmware), the command in adb is:
adb shell getprop ro.boot.bootloader
(or just "getprop ro.boot.bootloader" in a terminal prompt directly on the phone).
Click to expand...
Click to collapse
the solution was :: " apply " what is indicated in this post
http://forum.xda-developers.com/showthread.php?t=2567133

tower5 said:
the solution was :: " apply " what is indicated in this post
http://forum.xda-developers.com/showthread.php?t=2567133
Click to expand...
Click to collapse
Interesting, what firmware do you have now? And how are the switches listed in download mode? And what CSC do you have now? Do you have your IMEI back and is the phone registered on the network (and you can make/receive calls)? Is WiFi also working OK?

[Q] i need help ... i try to root and could not normal boot

could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you

ODIN MODE ( Could not do normal boot) SM9006
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
once I press UP , this came to ODIN MODE page without could not do normal boot.
but it cannot not loading. and struck at the page..
I tried to press again with VOL UP + HOME + POWER
it came to this page
Andriod. system recovery <3E>
KOT49.HN9006ZNUENH1
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
below written
#MANUAL MODE #
--Appling Multi-CSC...
Applied the CSC-code : CHN
Successfully applied multi-CSC.[?COLOR]
anyone can help, i reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
MODEL: NOTE 3 SM-N9006
CHINA NOTE 3
VERSION: KITKAT 4.4.2
and I tried download kies in Singapore, US and even China ..cannot detect,
whatever I tried, it automatically came to the odin mode cannot do normal reboot.
and in recovery mode I pressed VOL UP + HOME + POWER still go back to odin mode...
anyone can help me with it.
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
[/QUOTE]

ciny said:
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
Click to expand...
Click to collapse
G'day
I had the exact same issue with my SM-G900I. With the suggestion from an XDA senior; Try flashing with stock firmware from samsmobile.com for your particular model with Odin.
Trying this suggestion as I respond to your predicament. Shall keep you posted on the outcome.
Peace. :what:
Sent from my PNDPP47GP using XDA Free mobile app

[SOLVED] Samsung Galaxy A5 2016 Softbricked

Dear Readers,
I recently bought my Samsung Galaxy A5 2016 and its an excellent phone, although, I rooted it quite soon after purchase.
Used CF-Autoroot and everything worked just fine,
Now today I wanted to get Xposed up and running on my phone, and I wanted to back up everything first.
I installed Flashify and downloaded a TWRP img, I flashed it and rebooted my phone.
Heres some info now:
Normal boot: Kernel is not seandroid enforcing
What comes next: Bootloaded exception
[RST_STAT = 0x10000]
ASV TBL VER = 32768
LOT_ID = N469X
-Some useless CPU heat info etc-
Exception: do_handler_sync: UNKNOWN
pc : 0x40205000 l r : 0x43e07c68 sp:"0x43f07f40
Now after that I shut down with vol down+main menu+power button
And I boot again with vol up+main menu+power button
First comes up:
Installing system update...
Then:
On the bottom of the screen: dm-verity verification failed. . .
And ofcourse in the middle the basic options
On the top
Android System Recovery <e3>
PLEASE help me out cause I really dont know what to do now..
Greetings from The Netherlands
Edit: I get different text on the first normal boot every time it seems, some weird letters and numbers etc.
Example: B f $ AFA G $ AFB p G @F H1 G pl
Edit2: I cannot acces download mode and factory reset doesnt work.

You try to run the manufacturer's software with Samsung's Kies3 then follow the ROOT and install TWRP back through Odin Dowload mode Mode.

[Help] Can't root / boot after root SM-J500M

I tried everything for hours. Till I gave up
All I want is to be able to root this phone. I would get stuck at samsung logo after rooting and OS won't boot
Country/Region Brazil
Product Code ZTO
OS VersionMarshmallow (Android 6.0.1)
Release Date 15.12.2016
PDA J500MUBU1BPL1
CSC J500MZTO1BPL2
Phone J500MUBU1BPK1
I get errors about dm-verity verification failed in recovery mode, and I also can see
QUALCOMM Secure boot : enable
Secure Download : Enable
At download mode...
Please help guys I tried everything I found in the internet. I flashed TWRP with download mode, then would remove the battery and boot to recovery, install the supersu zip and reboot, that was the tutorial I was following but didn't work.

Hello bro
First : goto developer options and enable oem unlock
Then flash the twrp recovery with odin . Then install flashable supersu
That's what was I did to root my J5 too and done successfuly
Best regards..
Sent from my Samsung Galaxy J5 using XDA Labs

Firmware upgrade encountered an issue .please select recovery mode in kies)

Dear All .
my phone stuck in download mode , even if restart or charging , same image comes .
Samsung grand prime sm g531f
Android 5.1.1
lolipop
( Firmware upgrade encountered an issue .please select recovery mode in kies)
But trying its not going to recovery mode.
On top its showing .
odin mode ( multi core download )
Product name SM-G531f
current binary : samsung official
Sytem Status : official
FRP Lock : on
knox warranty void : 0x0
Secure download : enabled.
Ap swrev : S1 L1 ,N1
please help me out , what to do know , just tell me the process. .. I think its unrooted device.
please waiting for your reply .
regards
riyaz .

1. Download Kies from here
2. Open up your phone and find the S/N and Model behind the battery, note this down.
3. Plug your phone into a PC and power it on
4. Open up Kies and click "tools" then "firmware upgrade and initialization"
5. follow the prompts on screen
Your phone will be returned to stock operating system.
Please read more carefully before you flash some thing next time