just got this device - Galaxy Tab 2 General

Hi I was just given this tablet. It's a galaxy tab 2 10.1. so it's model number is gt-p5113. The android version is 4.2.2 build number jdq29.p5113ueucmk3
It was hardly ever used by the previous owner. When I charged it up and booted it up it was very very laggy. Of couse I did a factory reset fist thing. I went through and disabled all the useless apps on it. And it seems to be better.
I would.like to know if this tablet can be unlocked and install a clean version of Android on it. AOSP is what I would like to do with this. So is that possible? I have been using nexus and pixel for so long it's hard to remember all the stuff involved with doing all this. I would.like to get a newer version of Android on it. It doesn't have to be android 10 just a stable beer version. Is odin still the way to go with samsung? I do have android debug software on my PC so my pc should be good to go just need to install samsung drivers.
The main purpose of this tab is going to be for vision chats. I am moving so I want to be able.to see my nephew.
I. Not a rookie at flashing and modding but it has been a long time so if someone can give me a good place to start and there experienced with this tablet I would greatly appreciate it. If I can't put AOSP on then I will.jist disable as.much as I can and install pixel.launcher and all that and go that route. Just let me know what you pros think I'm open to whatever you guys have to say

Well for aosp try unlegacy android https://forum.xda-developers.com/ga...unified/rom-omap4-aosp-project-07-03-t3410092
---------- Post added at 12:31 PM ---------- Previous post was at 12:30 PM ----------
also its been long time i dont remember odin and stuff sry

Mithil17 said:
Well for aosp try unlegacy android https://forum.xda-developers.com/ga...unified/rom-omap4-aosp-project-07-03-t3410092
---------- Post added at 12:31 PM ---------- Previous post was at 12:30 PM ----------
also its been long time i dont remember odin and stuff sry
Click to expand...
Click to collapse
thank you for the suggestion. I was able to get 4.4.4 running completely aosp. Very nice and clean build. However I cant figure out root and I can't get anything higher than 4.4.4 going. It installs 6.0 but it won't boot. Most of the links in the galaxy tab form are not valid because this is so old. Is the file system different? How can i get 6 or 7 on this tablet? I can't even find stock files from Samsung to flash with Odin anymore. Do you have any valid linksorfilesfor this device? Or any advice on where to look? And again thank you for your help.

mojorisin7178 said:
thank you for the suggestion. I was able to get 4.4.4 running completely aosp. Very nice and clean build. However I cant figure out root and I can't get anything higher than 4.4.4 going. It installs 6.0 but it won't boot. Most of the links in the galaxy tab form are not valid because this is so old. Is the file system different? How can i get 6 or 7 on this tablet? I can't even find stock files from Samsung to flash with Odin anymore. Do you have any valid linksorfilesfor this device? Or any advice on where to look? And again thank you for your help.
Click to expand...
Click to collapse
Sounds like you forgot to wipe data when installing 6.0...
I got the stock 5113 files somewhere.. give me a few.
Find android andi's github. He's got a lot of information there
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
champ1919 said:
Sounds like you forgot to wipe them installing 6.0...
I got the stock 5113 files somewhere.. give me a few.
Find android andi's github. He's got a lot of information there
Click to expand...
Click to collapse
https://www.dropbox.com/s/skbw15p37ll0b2g/P5113UEUCMK3_P5113XACCND2_XAC.zip?dl=0

champ1919 said:
Sounds like you forgot to wipe data when installing 6.0...
I got the stock 5113 files somewhere.. give me a few.
Find android andi's github. He's got a lot of information there
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
https://www.dropbox.com/s/skbw15p37ll0b2g/P5113UEUCMK3_P5113XACCND2_XAC.zip?dl=0
Click to expand...
Click to collapse
Thank you again I appreciate it. I did wipe everything I even tried to redownload 6.0. The only thing I can think of is I am trying to install from the external sd card. Maybe I should try to put it on the internal sd card. But 4.4.4 works fine from the external card so I don't know. and oddly 4.4.4 only works with the pico gapps all other gapps make it not boot weird right? I have never come across that before. I never really had much luck modding tablets. And its been a long time since I did anything other than pixel/nexus. I am definitely a more pure android fanboy. anyway thanks again for pointing me in the right direction.
edit: Ah I feel like an idiot. I was using an older version of twrp i found a newer version thank to you. 6.0 booted with no problems!!!!

mojorisin7178 said:
thank you for the suggestion. I was able to get 4.4.4 running completely aosp. Very nice and clean build. However I cant figure out root and I can't get anything higher than 4.4.4 going. It installs 6.0 but it won't boot. Most of the links in the galaxy tab form are not valid because this is so old. Is the file system different? How can i get 6 or 7 on this tablet? I can't even find stock files from Samsung to flash with Odin anymore. Do you have any valid linksorfilesfor this device? Or any advice on where to look? And again thank you for your help.
Click to expand...
Click to collapse
Magisk for root ditch gapps I suggest you use andi's omni 7 if you can get nougat to run

mojorisin7178 said:
thank you for the suggestion. I was able to get 4.4.4 running completely aosp. Very nice and clean build. However I cant figure out root and I can't get anything higher than 4.4.4 going. It installs 6.0 but it won't boot. Most of the links in the galaxy tab form are not valid because this is so old. Is the file system different? How can i get 6 or 7 on this tablet? I can't even find stock files from Samsung to flash with Odin anymore. Do you have any valid linksorfilesfor this device? Or any advice on where to look? And again thank you for your help.
Click to expand...
Click to collapse
Well, for u hv boot issues with android 6.0 idk maybe u forgot to wipe data Do clean flashes!
And for the links go to http://andi34.github.io/

Related

[Q] Help with Safestrap/Cyanogenmod on Razr m

Hello,
I'm a little late to the Razr M game, but I just got a device off ebay since it's only about a year old and in great shape and quite cheap :good:
In any case, I've so far managed to unlock the radio for Tmobile in the US (GSM), and root it the device. Unfortunately, I didn't know when i bought it about the inability to unlock the bootloader with OTA from May and beyond, which mine is according to fastboot. I believe I came across the actual number being 98.18.78 somewhere.
So I've been doing a lot of reading, got SafeStrap running, made a stock backup, and am testing on slot1. However, I can't seem to get any CM ROM's running! Most of them 'boot' but then all I get is a blank screen, though I can connect with adb and therefore confirm that it does actually run some CM build.
I'm first of all somewhat confused on what ROM i should be using. I've found several links that should seem like they work, but none have succeeded (all have that halfway functionality that only works in ADB):
http://d-h.st/FgU
http://skrilax.droid-developers.org/cm10.1nightly/razrqcom/index.php?device=xt907
http://goo.im/devs/Hashcode/scorpion_mini/cm10.1
http://skrilax.droid-developers.org/cm10.2nightly/razrqcom/index.php?device=xt907
I found these in various threads on XDA and droidrazr.com. I basically read the entire 55 pages of http://forum.xda-developers.com/showthread.php?t=2012093 and since the link in the first page is dead I tried all the links that came up on the thread, which got a couple of the links in my list above.
Also, I did run across the tip that I had to mount system in SafeStrap to get these working, no success. And what's this thing about having to wipe dalvik and system and cache two or three times??
Basically I'd like the proper, up to date link that should be working, along answer to above question and and other tips!
Thanks!!! I love the phone otherwise it's great
UPDATE:
I did manage to get an CyanogenMod spinning forever startup screen with an ancient rom described here http://www.droidviews.com/install-first-aosp-based-unofficial-cm10-rom-on-motorola-droid-razr-m-xt907/ which appears to have come again from the thread mentioned above. The link is now gone but I have the .zip that I must have snagged right before it disappeared!
flyingsilverfin said:
Hello,
I'm a little late to the Razr M game, but I just got a device off ebay since it's only about a year old and in great shape and quite cheap :good:
In any case, I've so far managed to unlock the radio for Tmobile in the US (GSM), and root it the device. Unfortunately, I didn't know when i bought it about the inability to unlock the bootloader with OTA from May and beyond, which mine is according to fastboot. I believe I came across the actual number being 98.18.78 somewhere.
So I've been doing a lot of reading, got SafeStrap running, made a stock backup, and am testing on slot1. However, I can't seem to get any CM ROM's running! Most of them 'boot' but then all I get is a blank screen, though I can connect with adb and therefore confirm that it does actually run some CM build.
I'm first of all somewhat confused on what ROM i should be using. I've found several links that should seem like they work, but none have succeeded (all have that halfway functionality that only works in ADB):
http://d-h.st/FgU
http://skrilax.droid-developers.org/cm10.1nightly/razrqcom/index.php?device=xt907
http://goo.im/devs/Hashcode/scorpion_mini/cm10.1
http://skrilax.droid-developers.org/cm10.2nightly/razrqcom/index.php?device=xt907
I found these in various threads on XDA and droidrazr.com. I basically read the entire 55 pages of http://forum.xda-developers.com/showthread.php?t=2012093 and since the link in the first page is dead I tried all the links that came up on the thread, which got a couple of the links in my list above.
Also, I did run across the tip that I had to mount system in SafeStrap to get these working, no success. And what's this thing about having to wipe dalvik and system and cache two or three times??
Basically I'd like the proper, up to date link that should be working, along answer to above question and and other tips!
Thanks!!! I love the phone otherwise it's great
UPDATE:
I did manage to get an CyanogenMod spinning forever startup screen with an ancient rom described here http://www.droidviews.com/install-first-aosp-based-unofficial-cm10-rom-on-motorola-droid-razr-m-xt907/ which appears to have come again from the thread mentioned above. The link is now gone but I have the .zip that I must have snagged right before it disappeared!
Click to expand...
Click to collapse
There is not much.
You will not find much better than Mhous33's dst & my sd swap here : http://forum.xda-developers.com/showthread.php?t=2442384
There is also one at RZR http://www.droidrzr.com/index.php/topic/33740-rom-jb-98163-xt907-rage-m-v10-1232013/
---------- Post added at 07:47 PM ---------- Previous post was at 07:43 PM ----------
Your boot ,which includes the kernel & recovery are locked. All the roms you list use a non stock kernel.
---------- Post added at 07:51 PM ---------- Previous post was at 07:47 PM ----------
There are others but they are not current.
Well, none of the custom ROMs out now will work with SS. Their are some stock based ROMs, one of which was posted by Avi, that will work with SS. There are some older ROMs that were designed for SS and they were built prior to April (when our bootloader was unlocked). You'll have to dig back a couple of page to find them. I know there was SS compatible CM10 in that link you posted, but I don't think the link is active for it anymore. If you decide to run an older SS compatible ROM on your newer system version, you're going to run into kernel issues. Things like the gallery not working and WiFi signal being weak. Your best bet right now is to load a stock ROM on slot 1 and start tweaking that with XPosed and enabling Init.d so you can get some performance tweaks going.
Thanks for the response, I'll check those out. Glad to find some up to date roms haha
aviwdoowks said:
Your boot ,which includes the kernel & recovery are locked. All the roms you list use a non stock kernel.
Click to expand...
Click to collapse
This is something I didn't realize/know before, good to know! That would explain some of the problems. May I ask how you know they don't use stock kernels? Just experience in the development process or is there a way to check?
RikRong said:
Your best bet right now is to load a stock ROM on slot 1 and start tweaking that with XPosed and enabling Init.d so you can get some performance tweaks going.
Click to expand...
Click to collapse
Thanks for the info, I'll have to do some research if aviwdoowks's pointers dont work out! Second day fiddling with this stuff on android so I don't know what XPosed is/what Init.d does (although I think Ubuntu has that file too...)
Also, I tried the DeadCalm SS rom and i get an
E:signature verification failed
error
flyingsilverfin said:
Thanks for the response, I'll check those out. Glad to find some up to date roms haha
This is something I didn't realize/know before, good to know! That would explain some of the problems. May I ask how you know they don't use stock kernels? Just experience in the development process or is there a way to check?
Click to expand...
Click to collapse
Word would get round if they did, but What vzw wants moto to do to a phone is not what cwm wants to do. 4 cyl hi mpg VS racing v8
Same problem with the xt907-98.30.1-deodexed rom:
E: signature verification failed
Not sure what's wrong with BOTH of these?
Sorry, didn't do enough testing. Disabled zip verification and it wrote, just have to see its working!
flyingsilverfin said:
Thanks for the info, I'll have to do some research if aviwdoowks's pointers dont work out! Second day fiddling with this stuff on android so I don't know what XPosed is/what Init.d does (although I think Ubuntu has that file too...)
Also, I tried the DeadCalm SS rom and i get an
E:signature verification failed
error
Click to expand...
Click to collapse
Did you mount system before installed it?
All SS roms need mounting.
My link has steps.
---------- Post added at 09:08 PM ---------- Previous post was at 09:07 PM ----------
I think DC is not SS ready.
---------- Post added at 09:18 PM ---------- Previous post was at 09:08 PM ----------
DC flashes the damn skull bootlogo, easy to delete the bootlogo & # out instructions in the updater-script, other things too for a DIY SS rom
---------- Post added at 09:21 PM ---------- Previous post was at 09:18 PM ----------
DL my SS deodexed & use it as a templet as to what items need to be taken out.
Root Explorer is all you need.
Thanks for the help and links, I have the deodexed SS version from your link working. I see that it is not a debloated version; is the odexed version debloated?
Also I was originally hoping for a ROM with functionality like Cyanogenmod, but I guess the situation is too specific for that too happen. I might be interested in getting to ROM making/customizing at some point, I did some preliminary reading, I should be able to edit the deoxed SS ROM and then 'stitch it up again' in simplest terms, and it will still work on my device, correct? I feel like editing a ROM would be a great way to learn more about Android/Linux/bootloaders etc before I go to college.
flyingsilverfin said:
Thanks for the help and links, I have the deodexed SS version from your link working. I see that it is not a debloated version; is the odexed version debloated?
Also I was originally hoping for a ROM with functionality like Cyanogenmod, but I guess the situation is too specific for that too happen. I might be interested in getting to ROM making/customizing at some point, I did some preliminary reading, I should be able to edit the deoxed SS ROM and then 'stitch it up again' in simplest terms, and it will still work on my device, correct? I feel like editing a ROM would be a great way to learn more about Android/Linux/bootloaders etc before I go to college.
Click to expand...
Click to collapse
The odexed is DST which means a debloated to the same specs at the Telstra build. The SD swap works on both.
aviwdoowks said:
The odexed is DST which means a debloated to the same specs at the Telstra build. The SD swap works on both.
Click to expand...
Click to collapse
What is the telstra build? Is that the name of the stock motorola ROM that came with the device? Also I'm guessing SD swap is just a way have the phone treat the SD as internal memory?
Also, any idea if it would be possible or how difficult it would be to modify the ROM you linked me to to turn it into a Cyanogenmod port?
Thanks for all the help
flyingsilverfin said:
What is the telstra build? Is that the name of the stock motorola ROM that came with the device? Also I'm guessing SD swap is just a way have the phone treat the SD as internal memory?
Also, any idea if it would be possible or how difficult it would be to modify the ROM you linked me to to turn it into a Cyanogenmod port?
Thanks for all the help
Click to expand...
Click to collapse
Telstra is the Australian firmware, I believe. If you want to port CM, you need to pull from their source. The DST ROM is a stock Moto ROM that's built by the Moto software team. You can't really take that and change it into a CM port, but you can make your own build environment and start building CM.
flyingsilverfin said:
What is the telstra build? Is that the name of the stock motorola ROM that came with the device? Also I'm guessing SD swap is just a way have the phone treat the SD as internal memory?
Also, any idea if it would be possible or how difficult it would be to modify the ROM you linked me to to turn it into a Cyanogenmod port?
Thanks for all the help
Click to expand...
Click to collapse
Telstra is a carrier for the xt905. There are builds posted in our dev section. Any telstra rom is encrypted & if flashed w/ Rsd or Fastboot will brick an xt907.
Very difficult. Edit impossible.
RikRong said:
Telstra is the Australian firmware, I believe. If you want to port CM, you need to pull from their source. The DST ROM is a stock Moto ROM that's built by the Moto software team. You can't really take that and change it into a CM port, but you can make your own build environment and start building CM.
Click to expand...
Click to collapse
Alright thanks for the info. I was just doing some reading on the Linux Kernel. Since I am stuck with the stock motorola kernel, but this implements all the things I need to make the upper level, platform independent sys calls and other api's, there shouldn't be a need to build a special kernel for a cyanogenmod port, correct? If i port the higher level things everything that is implemented in cyanogenmod should work... am I getting this right? I'm trying to figure out what the OS kernel requirements are.

Best available stable ROM?

Hi everyone,
I am currently running ResurrectionRemix ROM 6.0.1 Marshmallow. However, I'm having a lot of issues with it. As I have said in another topic my apps constantly crash. Also, my phone randomly reboots about 3 times a day. My Google Mapps isn't working very well either.
Therefore, I'm looking for another ROM. I'm pretty much a noob, so I don't really know what my best options are. I see that most ROMs now are for Lollipop, is there a big difference between Marshmallow and Lollipop?
If you guys could share your opinion about the best ROM, and most importantly stable wise, that would be very much appreciated. I don't really need that much options, I just want it to work well and fast. Also, one that doesn't drain my battery in no time would be nice.
Hope to hear from you!
I have not tried many yet but fortunately so far have had good luck with ressurection remix, you might want to try temaseks cm13 rom, as that seemed stable from the limited usage I had with it. But it might help people in giving recommendations if you gave a preference of touchwiz or non touchwiz (although it seems like you prefer stock).
Sorry I couldn't give more help.
Chris
cmro said:
I have not tried many yet but fortunately so far have had good luck with ressurection remix, you might want to try temaseks cm13 rom, as that seemed stable from the limited usage I had with it. But it might help people in giving recommendations if you gave a preference of touchwiz or non touchwiz (although it seems like you prefer stock).
Sorry I couldn't give more help.
Chris
Click to expand...
Click to collapse
Thanks for the reply. I actually found the Audax ROM which I've read a lot of positive things about. There's just one thing I don't understand (and I can't ask in that thread cause I don't have 10 posts yet lol). It says in instructions:
Download Rom and control MD5: (a6031473f6378a58555880af9ca65290)
Do you know what 'control MD5' means? Before this ROM I just flashed ROMs by doing a clean wipe and then just installing the ROM.. Never heard about MD5 before..
Deleted
Ma3lish said:
Thanks for the reply. I actually found the Audax ROM which I've read a lot of positive things about. There's just one thing I don't understand (and I can't ask in that thread cause I don't have 10 posts yet lol). It says in instructions:
Download Rom and control MD5: (a6031473f6378a58555880af9ca65290)
Do you know what 'control MD5' means? Before this ROM I just flashed ROMs by doing a clean wipe and then just installing the ROM.. Never heard about MD5 before..
Click to expand...
Click to collapse
MD5 is just an encryption type used in zip files. ROMs and System files will have MD5 codes(provided by uploaders) so that we can verify MD5 of downloaded files with source files. We can find if downloads are corrupt or missing any bit of data
---------- Post added at 09:41 PM ---------- Previous post was at 09:41 PM ----------
And AryaMod ROM is my choice. It has ROM control app with loads of MODs. Also comes with Option to choose Stock or Idle Kernel (Power saving)
nijom said:
MD5 is just an encryption type used in zip files. ROMs and System files will have MD5 codes(provided by uploaders) so that we can verify MD5 of downloaded files with source files. We can find if downloads are corrupt or missing any bit of data
---------- Post added at 09:41 PM ---------- Previous post was at 09:41 PM ----------
And AryaMod ROM is my choice. It has ROM control app with loads of MODs. Also comes with Option to choose Stock or Idle Kernel (Power saving)
Click to expand...
Click to collapse
I see, thanks. I actually tried to install Audax, but that went not exactly according to plan lol. I installed and got stuck with a message about Aroma Installer. Brainless me accidentely deleted my back-up from my SD-card so there I was with a useless piece of plastic. I am now installing the stock ROM with help from Odin, so if everything goes well it'll work soon again.
Now I'm a bit hesistant with trying a new custom ROM... I don't know why it kept getting stuck with the Aroma Installer message.. :/
You shouldn't overload apps in Aroma. Thats why it gets stuck there at times.
Few users select more apps than the system partition can hold.
Ma3lish said:
I see, thanks. I actually tried to install Audax, but that went not exactly according to plan lol. I installed and got stuck with a message about Aroma Installer. Brainless me accidentely deleted my back-up from my SD-card so there I was with a useless piece of plastic. I am now installing the stock ROM with help from Odin, so if everything goes well it'll work soon again.
Now I'm a bit hesistant with trying a new custom ROM... I don't know why it kept getting stuck with the Aroma Installer message.. :/
Click to expand...
Click to collapse
Were you not able to mount the phone over USB whilst in recovery meaning you could put the zip for a working ROM onto the phone and install that?
i have SM-N900L. will the Phronesis Rom wok on my phone?
Ardie009 said:
i have SM-N900L. will the Phronesis Rom wok on my phone?
Click to expand...
Click to collapse
Your phone is full supported mate ! Enjoy the best rom you ever seen
Aryamod no doubt.
Sent from my SM-N9005 using XDA Free mobile app
Markofree said:
Your phone is full supported mate ! Enjoy the best rom you ever seen
Click to expand...
Click to collapse
just tried it lately.. so smooth room.. no problem encountered.. thanks mate :good:
I am having international exynos version running kitkat..
Will phronesis rom work for me and should i upgrade to lollipop for installing phronesis rom
---------- Post added at 09:12 PM ---------- Previous post was at 09:10 PM ----------
Somebody help me with an answer.. I am a big noob.. Just bought note 3 international version.. Feeling battery is bit low
QUOTE=drarunmmc;64899305]I am having international exynos version running kitkat..
Will phronesis rom work for me and should i upgrade to lollipop for installing phronesis rom
---------- Post added at 09:12 PM ---------- Previous post was at 09:10 PM ----------
Somebody help me with an answer.. I am a big noob.. Just bought note 3 international version.. Feeling battery is bit low[/QUOTE]
Your is SM-N900 and Phronesis desn't work on this model !
Funny, out of all the popular roms here, I am on the resurrection remix rom right now and it is running flawlessly on my Canadian n900w8. Someone mentioned temesak cm 13 but I wouldn't recommend it. I installed it and my phone kept freezing up and rebooting. I would give temesak's cm 12.1 a try.
I has AryaMod V8.1, everything is perfect I only have two problems, if the screen is at rest notifications are not activated and the setting crashes sometimes
shekaky0 said:
I has AryaMod V8.1, everything is perfect I only have two problems, if the screen is at rest notifications are not activated and the setting crashes sometimes
Click to expand...
Click to collapse
If you're coming from anything other than Stock ROM, you'll have to flash a Stock ROM, update BL and CP and then flash AryaMod. Else there'll be crashes
I'm on AryaMod. so smooth, no crashes. For me it's perfect. Just one issue: can't type with bluetooth keyboard. I can pair it, but there is no input... Idk why. Still searching for a fix. I don't want to go back to 4.4.4.
I prefer the Unofficial CyanogenMod 13.0 ROM which is stable and runs smoothly on my phone. If you calibrate your battery after flashing a new rom it will last longer.
iNette
I recommed you cm11 kitkat!

help build lg aristo rom?!?

Hello everyone just had a question, our new phone
The LG ARISTO is out and shiny, 7.0 stock
We have root unlocked bootloader and thanks to mess I(if you know em) has TWRP!!!
WOULD ANYONE BE WILLING TO HELP US BUILD LINEAGE OS OR SOME THING FOR IT?!?!
HELL ILL TOSS SOMEONE SOME CASH OF NEEDED! SO CLOSE BIT SO FAR
NGD1 said:
Hello everyone just had a question, our new phone
The LG ARISTO is out and shiny, 7.0 stock
We have root unlocked bootloader and thanks to mess I(if you know em) has TWRP!!!
WOULD ANYONE BE WILLING TO HELP US BUILD LINEAGE OS OR SOME THING FOR IT?!?!
HELL ILL TOSS SOMEONE SOME CASH OF NEEDED! SO CLOSE BIT SO FAR[/QUOT
LG Aristo hackers need help!!!! Contact Me ASAP!
Click to expand...
Click to collapse
Would love to learn
NGD1 said:
Hello everyone just had a question, our new phone
The LG ARISTO is out and shiny, 7.0 stock
We have root unlocked bootloader and thanks to mess I(if you know em) has TWRP!!!
WOULD ANYONE BE WILLING TO HELP US BUILD LINEAGE OS OR SOME THING FOR IT?!?!
HELL ILL TOSS SOMEONE SOME CASH OF NEEDED! SO CLOSE BIT SO FAR
Click to expand...
Click to collapse
I just got this phone from metro my first lg i love it and feel like rooting is just part of android so i am rooted with su 2.79-sr3 twrp and bootloader unlocked of course now this is my daily so i need to find how to factory reset incase of worse case sinario but would be very interested in learning to port i know alittle but never tried i love alliance and pac but i dont know what devices to try as the donor port rom and is a twrp back up of stock useable as base rom is there any base roms or stock to build from ill be looking forward to any insight on a starting point even if its porting vanilla cm 14 (i believe is 7.0) contact me at [email protected] or pm on here idk i never tried this ive just floated around looking love to become a contrubuting member
Terrance H. Crump
Thc1998
Any word on rom development yet?
Since I used 3TB last month with cricket they are kicking me off for a while grabbing this phone in a few hours from metro. I'll have a dump tonight and will start working on things this weekend.
Edit update
Got a dump having issues with the kernel but once thats fixed I'll have a stock ROM out and will work on everything else.
Hey guys I'm starting my ROM thread so far they are just dumps uploaded but when I figure my kernel issue then it will become a ROM. If you have that skill make the ROM and I'd like to collaborate with you. So far with my tweaks but making a full backup after I installed root then I started to delete junk even legs launchers installed both pixel launcher and the now launcher then copied the pixel launcher to the system/priv_app re booted into TWRP cleared cache and everything then restarted and removed now since it worked. She's so smooth omg.
https://forum.xda-developers.com/android/development/sysdump-wip-rom-lg-aristo-mpcs-t3586647
Let me know if you need any assistance.
I have a question though.
I unlocked the bootloader, I rooted it, but now I am having issues with the GPS. None of the GPS apps work (maps, tinder, etc.) It keeps saying to enable the location settings, which I have done. This happened a few days ago but the phone been rooted for a week. I am not entirely sure if they happened at the same time or not. Unfortunately the chimeratool will not ket me restore the original firmware (this device isnt supported) , but one of the LG firmware flashers may work. If that is the issue anyway, I won't reflash the firmware if there is a faster fix.
You could try disabling gps through adb and then enabling it, not too sure the commands but that might help.
Service?
Dose mess have stock 7.0? That sounds harsh but I'm just needing to know what type of build and could it use bug fixes or do a team need to do mess a good job or with custom boot and all..just asking. Flashbach from cm6.Not sounding greedy or a bit like a bully but cash??
---------- Post added at 10:30 PM ---------- Previous post was at 10:26 PM ----------
What's the location last logged.
---------- Post added at 10:37 PM ---------- Previous post was at 10:30 PM ----------
If you have a YouTube add me.I don't understand the threat lol. But I would like to see the work. 6 years a lot of change. Not being rude but might be the lag in the updates. My email is [email protected].
Wlh87 said:
Dose mess have stock 7.0? That sounds harsh but I'm just needing to know what type of build and could it use bug fixes or do a team need to do mess a good job or with custom boot and all..just asking. Flashbach from cm6.Not sounding greedy or a bit like a bully but cash??
---------- Post added at 10:30 PM ---------- Previous post was at 10:26 PM ----------
What's the location last logged.
---------- Post added at 10:37 PM ---------- Previous post was at 10:30 PM ----------
If you have a YouTube add me.I don't understand the threat lol. But I would like to see the work. 6 years a lot of change. Not being rude but might be the lag in the updates. My email is [email protected].
Click to expand...
Click to collapse
Solved
Solution: Disable high accuracy GPS. Leave (device only) on. GPS+network were not meshing well.
And the other tips can be find a home team.Its obviously simple just different.Examples are like building a house.The electric work is hidden along with the plumbing but the ppl that live the life there never see the work it took to get it running.The phone or device its self tells the ones that want to know.But its not the normal so all the bricks dont get counted.My point being is trying is lame when its step by step copy and paste.Just being real when will the job get seen.But honestly im out of reasons to keep the phone.Not.Ppl will miss it everyday while the apps fall out the sky.Give up for what.Push and im still learning the no pc one click.Just my opinion or did ppl stop dreaming all along.This is the goal.Js.Now break that code in the nice way we. Well some of us no how..7.1.03
Frp bypass easy.thats googles key to the locked door..um root permits not needed or do u still have to flash them.Now ck clockwork is still at work.draw apps could be better.but id like to recommend an idea to double check.
lgPlasmaGun
pzzzzzzt pzzzzzzt pzzzzt

My list of compiled Roms for Motorola Xoom

This is the forum for the roms I compile for Motorola Xoom.
I have nicknamed these future roms Moto-Rola for personal reasons. xD
I will try to make them faster and put some cute things on them, even if I start with KitKat versions.
As you all know, I am currently using some of Schischu's sources, I am just following his hard work and making it available for everyone.
This first rom is the Cyanogenmod 11 version for Motorola Xoom Wingray you already know.
I will compile next the Everest version, you will have to try it for me if I am able to do it. I do not have the everest version of the Motorola Xoom so...
https://www.dropbox.com/sh/1fxrnv2ce8fyjyn/AABHGMZcGCYBYqtDSvMMpXC-a?dl=0
Here are the links (up here) It is a dropbox folder with everything you need.
TWRP 3.0.1 recovery with sdcard support.
CM11 for wingray
Open gapps Kitkat pico version
Open gapps Kitkat nano version
Supersu.
Omnirom 4.4.4.
Thank you for your support!
XDA:DevDB Information
Moto-Rola ROMS, ROM for the Motorola Xoom
Contributors
Manuellama
Source Code: https://github.com/Manuellama/android/blob/android-4.4/default.xml
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: BigParted Recovery
Based On: CyanogenMod 11
Version Information
Status: Stable
Current Stable Version: 4.4.4
Stable Release Date: 2017-05-06
Created 2017-05-06
Last Updated 2018-01-20
Guys with wingray should tell us if they encounter problems. I have the everest, and can't try this.
I am grabbing this to try and get my winray going for the young bloke. I'll report back
---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
It works ok with the gapps included in the folder.
RaZz0Raus1980;72197561[/COLOR said:
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
Click to expand...
Click to collapse
What is this fixed apk that you are talking about please?
My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane.
---------- Post added at 10:33 PM ---------- Previous post was at 09:50 PM ----------
RaZz0Raus1980 said:
I am grabbing this to try and get my winray going for the young bloke. I'll report back
---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
Click to expand...
Click to collapse
Manuellama said:
It works ok with the gapps included in the folder.
Click to expand...
Click to collapse
FWIW:
Manuellama you are a legend.
I installed these gaaps after a reinstall of cm11 and it does work great indeed. No more stopped services bull***
Thank you so much. I was so upset about loosing my Xoom. I have an Nvidia shield k1 but the Xoom is still a great device to have around.
munecito said:
What is this fixed apk that you are talking about please?
My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane
Click to expand...
Click to collapse
Yep - flashed those files and seems 100% perrrrfect
Hi guys, thanks for the new build!
I would like a question, do I have to follow the procedures to in "BigPart Repartition Upgrade and Resource Center by realjumy" to format for bigpart?
I have a xoom GEDfied - It had a google official release. I am not sure if it was a UMTS or CDMA device before - it has a simcard slot.
I have tried the big part process many times and with no success - in the end, when flashing the CM 11 image, it says it is not a big part device... Is it because I am using wingray images?
Thanks very much!
In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.
But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997
Manuellama said:
In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.
But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997
Click to expand...
Click to collapse
Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.
I will wait for an everest build
jubarim said:
Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.
I will wait for an everest build
Click to expand...
Click to collapse
The easier way to know what variant is your Xoom is to check the model number at the back.
The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.
munecito said:
The easier way to know what variant is your Xoom is to check the model number at the back.
The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.
Click to expand...
Click to collapse
I will attach a picture here, I have not found the variant, I guess it is a prototype unit.
Yeah, bigpart is necessary...
https://goo.gl/photos/y8rQj2rNzU2d78PR9
@jubarim See that? My model number is mz601 (Everest) check your model number at the back of the tablet.
Thanks munecito! Mine don't have this sticker, I will post a picture tonight.
Well. It will help if you tell us if yours is a wifi only model, LTE? Where did you buy it (country)? Does it have a branded rom installed? Anything at all to identify it.
---------- Post added at 10:14 PM ---------- Previous post was at 10:08 PM ----------
kerry_xu_cs
12-02-2012, 10:47 AM |#10
Member68 posts Thanks: 13
boot into fastboot mode
plug your usb
use
fastboot getvar all
command to check the model
Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.
Manuellama said:
Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.
Click to expand...
Click to collapse
About 4 hours later and still not showing. Maybe the upload was interrupted.
Can't wait to try it.:good:
My internet failed, I will upload it now.
Everest uploaded.
I think it will work, but I am not 100% since I do not have an everest xoom.
Please try it, tell me if it works so I can put it on the main post.
I am going to test Everest. But I have a problem:
In the BigPart Repartition thread they say the following:
Put all needed resources on your microsd card! You will need the original TWRP 2.6.3.0 touch recovery from @runandhide05, TWRP 2.6.3.0 BigPart version, your desired rom, and the BigPart boot image that goes with your desired rom. The BigPart boot images can be found in the next section.
Click to expand...
Click to collapse
So what versions of TWRP do I put on the SD card? The one from the beginning of the thread is BigPart version?
It is the Schischu TWRP 3.0.1 recovery with added sd card support. I always do
Fastboot flash recovery recovery.img
If recovery.img is the name of the recovery image.
I cannot guarantee it works.

New be looking for help

Hi guys. I got a galaxy s5 sm-g900t with tmoblie. And basically I think I'm looking for a rom. Browsing around I'm not sure which one to get plus the last time I flashed a rom there was way less info lol. I'll have to freshen up on how to root.
And then there this linage thing. I'm so lost.
What I'm looking for is basically a bare bones that has all the bloat gone and system apps that aren't used. I'd like a dark mode but if I remember correctly that's a package I add?
But ya I'm running umm 6.0.1 and it's suddenly gotten slow and buggy and I haven't done anything so any help is apprieated. Thanks.
Darkmj16 said:
Hi guys. I got a galaxy s5 sm-g900t with tmoblie. And basically I think I'm looking for a rom. Browsing around I'm not sure which one to get plus the last time I flashed a rom there was way less info lol. I'll have to freshen up on how to root.
And then there this linage thing. I'm so lost.
What I'm looking for is basically a bare bones that has all the bloat gone and system apps that aren't used. I'd like a dark mode but if I remember correctly that's a package I add?
But ya I'm running umm 6.0.1 and it's suddenly gotten slow and buggy and I haven't done anything so any help is apprieated. Thanks.
Click to expand...
Click to collapse
Tell Me What Roms You Found And If It Stable Or Nightly(Unstable) And Its Android Version ,I Will Give You Suggestions Which One Is Great For You
---------- Post added at 05:10 PM ---------- Previous post was at 05:08 PM ----------
Darkmj16 said:
Hi guys. I got a galaxy s5 sm-g900t with tmoblie. And basically I think I'm looking for a rom. Browsing around I'm not sure which one to get plus the last time I flashed a rom there was way less info lol. I'll have to freshen up on how to root.
And then there this linage thing. I'm so lost.
What I'm looking for is basically a bare bones that has all the bloat gone and system apps that aren't used. I'd like a dark mode but if I remember correctly that's a package I add?
But ya I'm running umm 6.0.1 and it's suddenly gotten slow and buggy and I haven't done anything so any help is apprieated. Thanks.
Click to expand...
Click to collapse
Sorry Dark Mode Is Not A Package But Its A Feature In Latest Android Versions Maybe Nougat And Up?
haytamfrh said:
Tell Me What Roms You Found And If It Stable Or Nightly(Unstable) And Its Android Version ,I Will Give You Suggestions Which One Is Great For You
---------- Post added at 05:10 PM ---------- Previous post was at 05:08 PM ----------
Sorry Dark Mode Is Not A Package But Its A Feature In Latest Android Versions Maybe Nougat And Up?
Click to expand...
Click to collapse
Haven't actually found a rom. I was thinking the linage os. 16.x but seems like a high chance of me screwing it up.
Guess I'm basically looking for a bloat free stock rom that's got a speed boost. I've looked bc it seems like that would of been done but I didn't find one? Probably searching wrong.
Atm the biggest issues I'm having is maps, fb lite, camera, Gmail get very slow and none responsive to the point the phone reboots. Mind you I have tried rooting or flashing anything yet. It's still stock.
Darkmj16 said:
Haven't actually found a rom. I was thinking the linage os. 16.x but seems like a high chance of me screwing it up.
Guess I'm basically looking for a bloat free stock rom that's got a speed boost. I've looked bc it seems like that would of been done but I didn't find one? Probably searching wrong.
Atm the biggest issues I'm having is maps, fb lite, camera, Gmail get very slow and none responsive to the point the phone reboots. Mind you I have tried rooting or flashing anything yet. It's still stock.
Click to expand...
Click to collapse
How you search , like what you type in search ?
---------- Post added at 12:45 PM ---------- Previous post was at 12:35 PM ----------
Darkmj16 said:
Haven't actually found a rom. I was thinking the linage os. 16.x but seems like a high chance of me screwing it up.
Guess I'm basically looking for a bloat free stock rom that's got a speed boost. I've looked bc it seems like that would of been done but I didn't find one? Probably searching wrong.
Atm the biggest issues I'm having is maps, fb lite, camera, Gmail get very slow and none responsive to the point the phone reboots. Mind you I have tried rooting or flashing anything yet. It's still stock.
Click to expand...
Click to collapse
Don't Worry , you are searching for the wrong thing ,
I have tried so many ROMs one of them is fast and stable,
Search resurrection remix --> Website --> Download -->pie --> klte --> Find The Latest Version ,Go To The Bottom , Now download the one before the last one , that is 400mb , that is our ROM we need to download .
For custom recovery :twrp , root : magisk
Flash twrp tar image in Odin , choose the ap tap , don't touch anything else , or find a tutorial on YouTube on how to flash twrp
That is it ,don't forget to like my post
---------- Post added at 12:51 PM ---------- Previous post was at 12:45 PM ----------
Darkmj16 said:
Haven't actually found a rom. I was thinking the linage os. 16.x but seems like a high chance of me screwing it up.
Guess I'm basically looking for a bloat free stock rom that's got a speed boost. I've looked bc it seems like that would of been done but I didn't find one? Probably searching wrong.
Atm the biggest issues I'm having is maps, fb lite, camera, Gmail get very slow and none responsive to the point the phone reboots. Mind you I have tried rooting or flashing anything yet. It's still stock.
Click to expand...
Click to collapse
Make sure you make full backups before flashing custom ROM in twrp , that if anything goes wrong , you can always revert by restoring to your old backup.
---------- Post added at 12:55 PM ---------- Previous post was at 12:51 PM ----------
Darkmj16 said:
Haven't actually found a rom. I was thinking the linage os. 16.x but seems like a high chance of me screwing it up.
Guess I'm basically looking for a bloat free stock rom that's got a speed boost. I've looked bc it seems like that would of been done but I didn't find one? Probably searching wrong.
Atm the biggest issues I'm having is maps, fb lite, camera, Gmail get very slow and none responsive to the point the phone reboots. Mind you I have tried rooting or flashing anything yet. It's still stock.
Click to expand...
Click to collapse
MOST IMPORTANTLY IS TO DOWNLOAD GOOGLE APPS (GAPPS) : visit opengapps.org and choose arm and 9(pie) and nano or pico , pico has less gapps and nano have more gapps that are not available in play store .
So you need to flash it in twrp !

Categories

Resources