This is the forum for the roms I compile for Motorola Xoom.
I have nicknamed these future roms Moto-Rola for personal reasons. xD
I will try to make them faster and put some cute things on them, even if I start with KitKat versions.
As you all know, I am currently using some of Schischu's sources, I am just following his hard work and making it available for everyone.
This first rom is the Cyanogenmod 11 version for Motorola Xoom Wingray you already know.
I will compile next the Everest version, you will have to try it for me if I am able to do it. I do not have the everest version of the Motorola Xoom so...
https://www.dropbox.com/sh/1fxrnv2ce8fyjyn/AABHGMZcGCYBYqtDSvMMpXC-a?dl=0
Here are the links (up here) It is a dropbox folder with everything you need.
TWRP 3.0.1 recovery with sdcard support.
CM11 for wingray
Open gapps Kitkat pico version
Open gapps Kitkat nano version
Supersu.
Omnirom 4.4.4.
Thank you for your support!
XDA:DevDB Information
Moto-Rola ROMS, ROM for the Motorola Xoom
Contributors
Manuellama
Source Code: https://github.com/Manuellama/android/blob/android-4.4/default.xml
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: BigParted Recovery
Based On: CyanogenMod 11
Version Information
Status: Stable
Current Stable Version: 4.4.4
Stable Release Date: 2017-05-06
Created 2017-05-06
Last Updated 2018-01-20
Guys with wingray should tell us if they encounter problems. I have the everest, and can't try this.
I am grabbing this to try and get my winray going for the young bloke. I'll report back
---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
It works ok with the gapps included in the folder.
RaZz0Raus1980;72197561[/COLOR said:
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
Click to expand...
Click to collapse
What is this fixed apk that you are talking about please?
My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane.
---------- Post added at 10:33 PM ---------- Previous post was at 09:50 PM ----------
RaZz0Raus1980 said:
I am grabbing this to try and get my winray going for the young bloke. I'll report back
---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
Click to expand...
Click to collapse
Manuellama said:
It works ok with the gapps included in the folder.
Click to expand...
Click to collapse
FWIW:
Manuellama you are a legend.
I installed these gaaps after a reinstall of cm11 and it does work great indeed. No more stopped services bull***
Thank you so much. I was so upset about loosing my Xoom. I have an Nvidia shield k1 but the Xoom is still a great device to have around.
munecito said:
What is this fixed apk that you are talking about please?
My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane
Click to expand...
Click to collapse
Yep - flashed those files and seems 100% perrrrfect
Hi guys, thanks for the new build!
I would like a question, do I have to follow the procedures to in "BigPart Repartition Upgrade and Resource Center by realjumy" to format for bigpart?
I have a xoom GEDfied - It had a google official release. I am not sure if it was a UMTS or CDMA device before - it has a simcard slot.
I have tried the big part process many times and with no success - in the end, when flashing the CM 11 image, it says it is not a big part device... Is it because I am using wingray images?
Thanks very much!
In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.
But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997
Manuellama said:
In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.
But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997
Click to expand...
Click to collapse
Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.
I will wait for an everest build
jubarim said:
Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.
I will wait for an everest build
Click to expand...
Click to collapse
The easier way to know what variant is your Xoom is to check the model number at the back.
The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.
munecito said:
The easier way to know what variant is your Xoom is to check the model number at the back.
The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.
Click to expand...
Click to collapse
I will attach a picture here, I have not found the variant, I guess it is a prototype unit.
Yeah, bigpart is necessary...
https://goo.gl/photos/y8rQj2rNzU2d78PR9
@jubarim See that? My model number is mz601 (Everest) check your model number at the back of the tablet.
Thanks munecito! Mine don't have this sticker, I will post a picture tonight.
Well. It will help if you tell us if yours is a wifi only model, LTE? Where did you buy it (country)? Does it have a branded rom installed? Anything at all to identify it.
---------- Post added at 10:14 PM ---------- Previous post was at 10:08 PM ----------
kerry_xu_cs
12-02-2012, 10:47 AM |#10
Member68 posts Thanks: 13
boot into fastboot mode
plug your usb
use
fastboot getvar all
command to check the model
Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.
Manuellama said:
Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.
Click to expand...
Click to collapse
About 4 hours later and still not showing. Maybe the upload was interrupted.
Can't wait to try it.:good:
My internet failed, I will upload it now.
Everest uploaded.
I think it will work, but I am not 100% since I do not have an everest xoom.
Please try it, tell me if it works so I can put it on the main post.
I am going to test Everest. But I have a problem:
In the BigPart Repartition thread they say the following:
Put all needed resources on your microsd card! You will need the original TWRP 2.6.3.0 touch recovery from @runandhide05, TWRP 2.6.3.0 BigPart version, your desired rom, and the BigPart boot image that goes with your desired rom. The BigPart boot images can be found in the next section.
Click to expand...
Click to collapse
So what versions of TWRP do I put on the SD card? The one from the beginning of the thread is BigPart version?
It is the Schischu TWRP 3.0.1 recovery with added sd card support. I always do
Fastboot flash recovery recovery.img
If recovery.img is the name of the recovery image.
I cannot guarantee it works.
Related
Hello,
I'm a little late to the Razr M game, but I just got a device off ebay since it's only about a year old and in great shape and quite cheap :good:
In any case, I've so far managed to unlock the radio for Tmobile in the US (GSM), and root it the device. Unfortunately, I didn't know when i bought it about the inability to unlock the bootloader with OTA from May and beyond, which mine is according to fastboot. I believe I came across the actual number being 98.18.78 somewhere.
So I've been doing a lot of reading, got SafeStrap running, made a stock backup, and am testing on slot1. However, I can't seem to get any CM ROM's running! Most of them 'boot' but then all I get is a blank screen, though I can connect with adb and therefore confirm that it does actually run some CM build.
I'm first of all somewhat confused on what ROM i should be using. I've found several links that should seem like they work, but none have succeeded (all have that halfway functionality that only works in ADB):
http://d-h.st/FgU
http://skrilax.droid-developers.org/cm10.1nightly/razrqcom/index.php?device=xt907
http://goo.im/devs/Hashcode/scorpion_mini/cm10.1
http://skrilax.droid-developers.org/cm10.2nightly/razrqcom/index.php?device=xt907
I found these in various threads on XDA and droidrazr.com. I basically read the entire 55 pages of http://forum.xda-developers.com/showthread.php?t=2012093 and since the link in the first page is dead I tried all the links that came up on the thread, which got a couple of the links in my list above.
Also, I did run across the tip that I had to mount system in SafeStrap to get these working, no success. And what's this thing about having to wipe dalvik and system and cache two or three times??
Basically I'd like the proper, up to date link that should be working, along answer to above question and and other tips!
Thanks!!! I love the phone otherwise it's great
UPDATE:
I did manage to get an CyanogenMod spinning forever startup screen with an ancient rom described here http://www.droidviews.com/install-first-aosp-based-unofficial-cm10-rom-on-motorola-droid-razr-m-xt907/ which appears to have come again from the thread mentioned above. The link is now gone but I have the .zip that I must have snagged right before it disappeared!
flyingsilverfin said:
Hello,
I'm a little late to the Razr M game, but I just got a device off ebay since it's only about a year old and in great shape and quite cheap :good:
In any case, I've so far managed to unlock the radio for Tmobile in the US (GSM), and root it the device. Unfortunately, I didn't know when i bought it about the inability to unlock the bootloader with OTA from May and beyond, which mine is according to fastboot. I believe I came across the actual number being 98.18.78 somewhere.
So I've been doing a lot of reading, got SafeStrap running, made a stock backup, and am testing on slot1. However, I can't seem to get any CM ROM's running! Most of them 'boot' but then all I get is a blank screen, though I can connect with adb and therefore confirm that it does actually run some CM build.
I'm first of all somewhat confused on what ROM i should be using. I've found several links that should seem like they work, but none have succeeded (all have that halfway functionality that only works in ADB):
http://d-h.st/FgU
http://skrilax.droid-developers.org/cm10.1nightly/razrqcom/index.php?device=xt907
http://goo.im/devs/Hashcode/scorpion_mini/cm10.1
http://skrilax.droid-developers.org/cm10.2nightly/razrqcom/index.php?device=xt907
I found these in various threads on XDA and droidrazr.com. I basically read the entire 55 pages of http://forum.xda-developers.com/showthread.php?t=2012093 and since the link in the first page is dead I tried all the links that came up on the thread, which got a couple of the links in my list above.
Also, I did run across the tip that I had to mount system in SafeStrap to get these working, no success. And what's this thing about having to wipe dalvik and system and cache two or three times??
Basically I'd like the proper, up to date link that should be working, along answer to above question and and other tips!
Thanks!!! I love the phone otherwise it's great
UPDATE:
I did manage to get an CyanogenMod spinning forever startup screen with an ancient rom described here http://www.droidviews.com/install-first-aosp-based-unofficial-cm10-rom-on-motorola-droid-razr-m-xt907/ which appears to have come again from the thread mentioned above. The link is now gone but I have the .zip that I must have snagged right before it disappeared!
Click to expand...
Click to collapse
There is not much.
You will not find much better than Mhous33's dst & my sd swap here : http://forum.xda-developers.com/showthread.php?t=2442384
There is also one at RZR http://www.droidrzr.com/index.php/topic/33740-rom-jb-98163-xt907-rage-m-v10-1232013/
---------- Post added at 07:47 PM ---------- Previous post was at 07:43 PM ----------
Your boot ,which includes the kernel & recovery are locked. All the roms you list use a non stock kernel.
---------- Post added at 07:51 PM ---------- Previous post was at 07:47 PM ----------
There are others but they are not current.
Well, none of the custom ROMs out now will work with SS. Their are some stock based ROMs, one of which was posted by Avi, that will work with SS. There are some older ROMs that were designed for SS and they were built prior to April (when our bootloader was unlocked). You'll have to dig back a couple of page to find them. I know there was SS compatible CM10 in that link you posted, but I don't think the link is active for it anymore. If you decide to run an older SS compatible ROM on your newer system version, you're going to run into kernel issues. Things like the gallery not working and WiFi signal being weak. Your best bet right now is to load a stock ROM on slot 1 and start tweaking that with XPosed and enabling Init.d so you can get some performance tweaks going.
Thanks for the response, I'll check those out. Glad to find some up to date roms haha
aviwdoowks said:
Your boot ,which includes the kernel & recovery are locked. All the roms you list use a non stock kernel.
Click to expand...
Click to collapse
This is something I didn't realize/know before, good to know! That would explain some of the problems. May I ask how you know they don't use stock kernels? Just experience in the development process or is there a way to check?
RikRong said:
Your best bet right now is to load a stock ROM on slot 1 and start tweaking that with XPosed and enabling Init.d so you can get some performance tweaks going.
Click to expand...
Click to collapse
Thanks for the info, I'll have to do some research if aviwdoowks's pointers dont work out! Second day fiddling with this stuff on android so I don't know what XPosed is/what Init.d does (although I think Ubuntu has that file too...)
Also, I tried the DeadCalm SS rom and i get an
E:signature verification failed
error
flyingsilverfin said:
Thanks for the response, I'll check those out. Glad to find some up to date roms haha
This is something I didn't realize/know before, good to know! That would explain some of the problems. May I ask how you know they don't use stock kernels? Just experience in the development process or is there a way to check?
Click to expand...
Click to collapse
Word would get round if they did, but What vzw wants moto to do to a phone is not what cwm wants to do. 4 cyl hi mpg VS racing v8
Same problem with the xt907-98.30.1-deodexed rom:
E: signature verification failed
Not sure what's wrong with BOTH of these?
Sorry, didn't do enough testing. Disabled zip verification and it wrote, just have to see its working!
flyingsilverfin said:
Thanks for the info, I'll have to do some research if aviwdoowks's pointers dont work out! Second day fiddling with this stuff on android so I don't know what XPosed is/what Init.d does (although I think Ubuntu has that file too...)
Also, I tried the DeadCalm SS rom and i get an
E:signature verification failed
error
Click to expand...
Click to collapse
Did you mount system before installed it?
All SS roms need mounting.
My link has steps.
---------- Post added at 09:08 PM ---------- Previous post was at 09:07 PM ----------
I think DC is not SS ready.
---------- Post added at 09:18 PM ---------- Previous post was at 09:08 PM ----------
DC flashes the damn skull bootlogo, easy to delete the bootlogo & # out instructions in the updater-script, other things too for a DIY SS rom
---------- Post added at 09:21 PM ---------- Previous post was at 09:18 PM ----------
DL my SS deodexed & use it as a templet as to what items need to be taken out.
Root Explorer is all you need.
Thanks for the help and links, I have the deodexed SS version from your link working. I see that it is not a debloated version; is the odexed version debloated?
Also I was originally hoping for a ROM with functionality like Cyanogenmod, but I guess the situation is too specific for that too happen. I might be interested in getting to ROM making/customizing at some point, I did some preliminary reading, I should be able to edit the deoxed SS ROM and then 'stitch it up again' in simplest terms, and it will still work on my device, correct? I feel like editing a ROM would be a great way to learn more about Android/Linux/bootloaders etc before I go to college.
flyingsilverfin said:
Thanks for the help and links, I have the deodexed SS version from your link working. I see that it is not a debloated version; is the odexed version debloated?
Also I was originally hoping for a ROM with functionality like Cyanogenmod, but I guess the situation is too specific for that too happen. I might be interested in getting to ROM making/customizing at some point, I did some preliminary reading, I should be able to edit the deoxed SS ROM and then 'stitch it up again' in simplest terms, and it will still work on my device, correct? I feel like editing a ROM would be a great way to learn more about Android/Linux/bootloaders etc before I go to college.
Click to expand...
Click to collapse
The odexed is DST which means a debloated to the same specs at the Telstra build. The SD swap works on both.
aviwdoowks said:
The odexed is DST which means a debloated to the same specs at the Telstra build. The SD swap works on both.
Click to expand...
Click to collapse
What is the telstra build? Is that the name of the stock motorola ROM that came with the device? Also I'm guessing SD swap is just a way have the phone treat the SD as internal memory?
Also, any idea if it would be possible or how difficult it would be to modify the ROM you linked me to to turn it into a Cyanogenmod port?
Thanks for all the help
flyingsilverfin said:
What is the telstra build? Is that the name of the stock motorola ROM that came with the device? Also I'm guessing SD swap is just a way have the phone treat the SD as internal memory?
Also, any idea if it would be possible or how difficult it would be to modify the ROM you linked me to to turn it into a Cyanogenmod port?
Thanks for all the help
Click to expand...
Click to collapse
Telstra is the Australian firmware, I believe. If you want to port CM, you need to pull from their source. The DST ROM is a stock Moto ROM that's built by the Moto software team. You can't really take that and change it into a CM port, but you can make your own build environment and start building CM.
flyingsilverfin said:
What is the telstra build? Is that the name of the stock motorola ROM that came with the device? Also I'm guessing SD swap is just a way have the phone treat the SD as internal memory?
Also, any idea if it would be possible or how difficult it would be to modify the ROM you linked me to to turn it into a Cyanogenmod port?
Thanks for all the help
Click to expand...
Click to collapse
Telstra is a carrier for the xt905. There are builds posted in our dev section. Any telstra rom is encrypted & if flashed w/ Rsd or Fastboot will brick an xt907.
Very difficult. Edit impossible.
RikRong said:
Telstra is the Australian firmware, I believe. If you want to port CM, you need to pull from their source. The DST ROM is a stock Moto ROM that's built by the Moto software team. You can't really take that and change it into a CM port, but you can make your own build environment and start building CM.
Click to expand...
Click to collapse
Alright thanks for the info. I was just doing some reading on the Linux Kernel. Since I am stuck with the stock motorola kernel, but this implements all the things I need to make the upper level, platform independent sys calls and other api's, there shouldn't be a need to build a special kernel for a cyanogenmod port, correct? If i port the higher level things everything that is implemented in cyanogenmod should work... am I getting this right? I'm trying to figure out what the OS kernel requirements are.
It's been requested that I create a new thread for this so as not to clog up @milaq's thread.
As some of you may have seen in flintman's Evervolv and milaq's CM threads, there has been a lot of work on the 3.4 kernel for tenderloin. Its a pretty awesome feat to have this running on our good ol tenderloin. =)
The gratitude for this kernel and build needs to be given to almost anyone but me. (Flemmard, flintman, jcsullins, Dorregaray and everyone that came before me on this device (dalingrin, green, and other's I'm sure that I'm missing)). I've had my tenderloin for quite awhile but never really done much with it until recently.
Anyway, without further ado, I present to you nightlies of CM-11.0 for tenderloin with a 3.4 kernel and -caf based HALs. Basically what this means is we'll be running the latest code from codeaurora on our msm8660 tenderloin.
THERE WILL BE BUGS! This thing is not perfect. It is still in active development.
CURRENT BUGZ (in no particular order):
- Bluetooth steals battery, but DOES work (jcsullins) - also sixaxis app doesn't work =(
- Camera is a bit derpy still, major wip, it takes pictures though (Dorregaray)
- Other stuff? Probably, yea
Destructions: PLEASE READ
1. This is a /data/media rom (relevant). What that means is you should be partitioned with a very small 'media' partition and a very large 'data' partition. The benefit of this is that your /sdcard and /data partitions share the big chunk of your usable space, just like any newer phone does these days. Use TPToolbox to achieve the new partition scheme: http://forum.xda-developers.com/showthread.php?t=2756314
2. You'll need a recovery that has both /data/media support and selinux support. Any of the following will work. Flashable via recovery.
-PhilZ Clockworkmod 6.0.4.7 (non-touch)(will backup and restore in both cwm and twrp format)
-Milaq's ClockworkMod 6.0.5.4
-Flintman's TWRP
3. Now you're ready to flash the rom. Downloads here: http://www.invisiblek.org/roms/cm-11.0/tenderloin/
4. Gapps here: http://wiki.cyanogenmod.org/w/Google_Apps
I'd recommend wiping data when coming to this rom or going to a different one (going between milaq's and this should be fine).
These are automatically built on my personal server at home and then uploaded. There may or may not be issues during the build times so don't always expect a fresh build every day. You can follow the automated twitter account here which will spit out a tweet once the build is finished uploading.
Sources:
-Kernel
-Device Tree
-CM Sources (the rest of what's needed)
There are a couple more changes and a couple other repos that are required to build this. Add this stuff to your .repo/local_manifests/roomservice.xml in order to build this yourself (after syncing the cm source of course)
http://pastebin.com/jKAMWM8T
You'll also need to cherry pick this commit from jcsullins: http://review.cyanogenmod.org/#/c/54380
Feel free to fork and fix!
Again -
Thanks to everyone that has contributed to making this rom.
Flemmard, flintman, jcsullins, dalingrin, green, milaq, the entire CM team and I'm sure many others.
Good new year present.
Looking forward to when Bluetooth is working. That and the black boxes were the only thing keeping me off KitKat.
Sent from my TouchPad using XDA Premium 4 mobile app
invisiblek, I used your 20131226 ROM. It kept crashing and rebooting every time I played a video. Netflix would crash immediately on loading and reboot the tablet. Has this been fixed with your 20131231 build?
Sent from my Touchpad using Tapatalk
---------- Post added at 08:53 PM ---------- Previous post was at 08:39 PM ----------
I almost forgot… I also had major issues with apps not installing or disappearing after a reboot.
Sent from my Touchpad using Tapatalk
i am trying to move uImage.ClockworkMod after rename the file its asking file already exit ,should we need to replace ?
i tried to keep both but it never successful...
is there any way to intall from zip file like upgrading recovery
k4ever said:
invisiblek, I used your 20131226 ROM. It kept crashing and rebooting every time I played a video. Netflix would crash immediately on loading and reboot the tablet. Has this been fixed with your 20131231 build?
Sent from my Touchpad using Tapatalk
---------- Post added at 08:53 PM ---------- Previous post was at 08:39 PM ----------
I almost forgot… I also had major issues with apps not installing or disappearing after a reboot.
Sent from my Touchpad using Tapatalk
Click to expand...
Click to collapse
I believe Flint said video playback was still a bit broke around that date. I remember loading that build and Diceplayer would crash upon playing a video, but it would only crash back to the home screen (not entirely crash and reboot). I think Flint said he fixed it earlier, so try 20140101 when it comes out.
vinukondamahesh said:
i am trying to move uImage.ClockworkMod after rename the file its asking file already exit ,should we need to replace ?
i tried to keep both but it never successful...
is there any way to intall from zip file like upgrading recovery
Click to expand...
Click to collapse
Replace it so you can use the new CWM to flash this build. I believe /boot is limited to 30mb so trying to keep both may not work.
allstar319, what about the disappearing apps? Has that been fixed?
Sent from my Touchpad using Tapatalk
k4ever said:
allstar319, what about the disappearing apps? Has that been fixed?
Sent from my Touchpad using Tapatalk
Click to expand...
Click to collapse
No clue. I heard of apps disappearing from the Google Home Launcher, but not getting completely removed or preventing apps from being installed. Is that the launcher you're using? Only remedy I heard from that (Milaq's CM11 thread, somewhere around page 40) was to just readd them from the app drawer.
Best advice is to wait for todays build to get uploaded and see what happens.
2. You'll need a recovery that has both /data/media support and selinux support. This clockworkmod will do the trick: http://invisiblek.org/tenderloin/openrecovery-twrp-2.6.3.0-tenderloin-selinux.img (thanks @milaq)
Push it to /boot/uImage.ClockworkMod
Great ROM far, I loaded the recovery but i named it TWRP instead because it says TWRP in the file name. It ran as TWRP . Is the above just a typo or can I call it either one?
Sent from my Touchpad using XDA Premium HD
allstar319 said:
I believe Flint said video playback was still a bit broke around that date. I remember loading that build and Diceplayer would crash upon playing a video, but it would only crash back to the home screen (not entirely crash and reboot). I think Flint said he fixed it earlier, so try 20140101 when it comes out.
Replace it so you can use the new CWM to flash this build. I believe /boot is limited to 30mb so trying to keep both may not work.
Click to expand...
Click to collapse
thank you its working nw
milaq actually has a flashable zip in his thread. that is the easiest. i was on 4.3 went into that recovery, made a backup then flashed the new cwm, rebooted recovery did a full wipe and flashed the rom and gapps and i am up and running. who would have ever thought we would have kitkat on a touchpad. not to mention a 3.x kernel. unreal, thanks for everyones work. Happy New Year
jerryatherton said:
2. You'll need a recovery that has both /data/media support and selinux support. This clockworkmod will do the trick: http://invisiblek.org/tenderloin/openrecovery-twrp-2.6.3.0-tenderloin-selinux.img (thanks @milaq)
Push it to /boot/uImage.ClockworkMod
Great ROM far, I loaded the recovery but i named it TWRP instead because it says TWRP in the file name. It ran as TWRP . Is the above just a typo or can I call it either one?
Sent from my Touchpad using XDA Premium HD
Click to expand...
Click to collapse
Oops, I had the wrong image there. Link updated with the cwm =P
EDIT: Also added a flashable zip for it, had trouble downloading milaq's so I made my own =/
Anyone else getting a Core Process failure message when booting to the 01012014 Build?
I went back to the 12312013 build and all appears to be back to normal.
To be clear, I went straight to this build from a fresh CM9 image without booting into Android - ever. Got a second-hand device back from a relative, and pushed it to CM11, so it may have been a result of my own process.
I'll reflash 01012014 and see if the error persists.
--McBean
Really looking forwards to a stable version of this to try. Thanks for the effort.
BillzillaAus said:
Really looking forwards to a stable version of this to try. Thanks for the effort.
Click to expand...
Click to collapse
So am I. Right now I'm using invisiblek's CM 10.2 ROM. It's stable (although a little slow). I don't want to jump to CM 11 again until it is a lot more stable.
BTW, can someone point me to a thread that discusses that benefits of the 3.4 kernel on the Touchpad?
Sent from my Touchpad using Tapatalk
k4ever said:
So am I. Right now I'm using invisiblek's CM 10.2 ROM. It's stable (although a little slow). I don't want to jump to CM 11 again until it is a lot more stable.
BTW, can someone point me to a thread that discusses that benefits of the 3.4 kernel on the Touchpad?
Sent from my Touchpad using Tapatalk
Click to expand...
Click to collapse
IIRC, a long time ago, someone mentioned that there were some benefits of Jelly Bean that we couldn't use because of the version of our kernel we were using. I would assume the same still applies today if that was the case. Also, with CM11, black boxes are present in many apps that prove them to be unusable. The default browser is unusable on CM11 with the old kernel, so you'd have to either use Chrome, or wait for a new kernel. I'm sure there are some performance enhancements as well.
On todays build, video playback still seems to crash to the home screen with Diceplayer (I could of swore Flint said he fixed that in his build at least). I haven't tested Milaq's test build of the 3.0 kernel to see if that's the same case over there.
allstar319 said:
IIRC, a long time ago, someone mentioned that there were some benefits of Jelly Bean that we couldn't use because of the version of our kernel we were using. I would assume the same still applies today if that was the case. Also, with CM11, black boxes are present in many apps that prove them to be unusable. The default browser is unusable on CM11 with the old kernel, so you'd have to either use Chrome, or wait for a new kernel. I'm sure there are some performance enhancements as well.
On todays build, video playback still seems to crash to the home screen with Diceplayer (I could of swore Flint said he fixed that in his build at least). I haven't tested Milaq's test build of the 3.0 kernel to see if that's the same case over there.
Click to expand...
Click to collapse
Thanks for the quick reply. Bummer!
Sent from my Touchpad using Tapatalk
---------- Post added at 04:59 PM ---------- Previous post was at 04:48 PM ----------
One more question for invisiblek, will you be making any updates/improvements to CM10.2 or has all development shifted to CM11? The last 10.2 ROM was on 20131209. I'm having issues with the camera not working..
Sent from my Touchpad using Tapatalk
k4ever said:
Thanks for the quick reply. Bummer!
Sent from my Touchpad using Tapatalk
---------- Post added at 04:59 PM ---------- Previous post was at 04:48 PM ----------
One more question for invisiblek, will you be making any updates/improvements to CM10.2 or has all development shifted to CM11? The last 10.2 ROM was on 20131209. I'm having issues with the camera not working..
Click to expand...
Click to collapse
Also, the old kernel was preventing us from having "official" CM builds.
Getting SoD's once I turn the screen off. Tried the old way to fix that by raising the min clock, but that didn't seem to help. Any ideas?
k4ever said:
Thanks for the quick reply. Bummer!
Sent from my Touchpad using Tapatalk
---------- Post added at 04:59 PM ---------- Previous post was at 04:48 PM ----------
One more question for invisiblek, will you be making any updates/improvements to CM10.2 or has all development shifted to CM11? The last 10.2 ROM was on 20131209. I'm having issues with the camera not working..
Sent from my Touchpad using Tapatalk
Click to expand...
Click to collapse
The 3.4 kernel, minimally, resolves an issues with the other CM11 builds where the core/stock apps were experiencing "black boxes" which prevented users from reading mail, using the browser to navigate and some other issues. Right off the bat, the new kernel resolves that issue.
--McBean
Q&A for [ROM][5.0 Lollipop] AOSP build
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0 Lollipop] AOSP build. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How to come back after flashing lollipop on n4?
I flashed this rom http://forum.xda-developers.com/nexus-4/orig-development.
Now I'm without root and recovery, what should I do for restoring the nandroid, or stock rom?:crying:
If somebody has an Android Wear device, can they test if persisting notifications like Play Music/Soundcloud show up on the watch? Thanks!
If somebody has an Android Wear device, can they test if persisting notifications like Play Music/Soundcloud show up on the watch? Thanks, desperate to know if this is fixed in b21.
Please help me! I ve installed this rom and now i can t go to recovery .it seems not installed!
Sent from my AOSP on Mako using XDA Free mobile app
Nc_ said:
I flashed this rom http://forum.xda-developers.com/nexus-4/orig-development.
Now I'm without root and recovery, what should I do for restoring the nandroid, or stock rom?:crying:
Click to expand...
Click to collapse
First of all you need to reboot in fastboot mode (turn off, after that press volume up + volume down + power).
When you are in that mode, you can flash your recovery with the command fastboot flash recovery <recovery image>
For root you should download the last SuperSU from chainfire (you cand find it here : http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133) and flash it via recovery.
Thats is all ! Enojoy Lollipop !
---------- Post added at 05:28 PM ---------- Previous post was at 05:16 PM ----------
fhf758 said:
Please help me! I ve installed this rom and now i can t go to recovery .it seems not installed!
Sent from my AOSP on Mako using XDA Free mobile app
Click to expand...
Click to collapse
That because this new AOSP automaticaly install the stock recovery.
You should reinstall it manualy !
I think next rom build will fix that or install B21 from @sykopompos (http://forum.xda-developers.com/nexus-4/development/lpv-79-mako-port-beta-t2807446)
Thank you!
Sent from my AOSP on Mako using XDA Free mobile app
---------- Post added at 05:39 PM ---------- Previous post was at 05:35 PM ----------
Should the recovery ne in .IMG format?
Sent from my AOSP on Mako using XDA Free mobile app
Is the German language in this AOSP available?
Can i do it whithout a computer?
Sent from my AOSP on Mako using XDA Free mobile app
When i flash from TWRP i receive the No OS Installed message, it's normal?
I used a modified gapps from the lpv thread and it seemed to work ok, the whole thing, its really beautiful.
However, unusable.
I did a dirty upgrade from CM11, and now play services won't work, and process.android.media keeps crashing. I mean i get error messages every few seconds. Can't even install logcat. Any ideas, besides formatting the whole thing and starting over?
Vegeta3gfx said:
Is the German language in this AOSP available?
Click to expand...
Click to collapse
Yes, the german language still alredy avaiable.
fhf758 said:
Can i do it whithout a computer?
Click to expand...
Click to collapse
No, because the rom isn't already rooted and you cannot use app still need root access.
Gabrielqoc said:
When i flash from TWRP i receive the No OS Installed message, it's normal?
Click to expand...
Click to collapse
I've install TWRP 2.8.1.0 and, after wipe/factory reset, i've install the rom B21 with chainfire 2.19 supersu and fix for calendar sync.
---------- Post added at 10:43 PM ---------- Previous post was at 10:37 PM ----------
zyenide said:
I used a modified gapps from the lpv thread and it seemed to work ok, the whole thing, its really beautiful.
However, unusable.
I did a dirty upgrade from CM11, and now play services won't work, and process.android.media keeps crashing. I mean i get error messages every few seconds. Can't even install logcat. Any ideas, besides formatting the whole thing and starting over?
Click to expand...
Click to collapse
That rom (B21), should be install from clean status only.
Mostly that rom contain alredy the minimal gapps, the other can be install by Play Store.
Personally this rom work perfectly
Here my phone
Cannot Download
I can't download from the link, it say too many user have to wait 24 hour, but till now still cannot.
Have other link to get this ?????
Battery
Does the Battery-Bug from 5.0 concerns Nexus 4 devices?
Gapps cm 4.4.3
I installed CM4.4.3 Gapps didn't modify anything and its working just fine. The play store took some time to come up on the first try. I'm using all the google apps with now problems so far.
LainX said:
That because this new AOSP automaticaly install the stock recovery.
You should reinstall it manualy !
I think next rom build will fix that
Click to expand...
Click to collapse
No, there is no recovery in the update.zip. I have flashed about 10 times today and I still have my good old TWRP 2.7.0.0.
fhf758 said:
Can i do it whithout a computer?
Click to expand...
Click to collapse
If you already have TWRP or CWM installed (or your phone is rooted): yes. It might even work with stock recovery, but I haven't tested.
Gabrielqoc said:
When i flash from TWRP i receive the No OS Installed message, it's normal?
Click to expand...
Click to collapse
No. Something went wrong. Follow exactly each step of the new instructions.
zyenide said:
I used a modified gapps from the lpv thread and it seemed to work ok, the whole thing, its really beautiful.
However, unusable.
I did a dirty upgrade from CM11, and now play services won't work, and process.android.media keeps crashing. I mean i get error messages every few seconds. Can't even install logcat. Any ideas, besides formatting the whole thing and starting over?
Click to expand...
Click to collapse
I messed around with FCs the whole day and finally gave up my dirty flash.
LainX said:
No, because the rom isn't already rooted and you cannot use app still need root access.
Click to expand...
Click to collapse
There's a new version with root support. Unfortunately, none of my root apps is compatible with Lollipop so far
mykhyeo said:
I can't download from the link, it say too many user have to wait 24 hour, but till now still cannot.
Have other link to get this ?????
Click to expand...
Click to collapse
I've re-uploaded all file to MEGA.
DieserTii said:
Does the Battery-Bug from 5.0 concerns Nexus 4 devices?
Click to expand...
Click to collapse
I don't think so, it's a different chipset.
root
I forgot to root it, now I cannot boot to recovery mode anymore. Is there anyone know how to root my phone?
honorigami said:
I forgot to root it, now I cannot boot to recovery mode anymore. Is there anyone know how to root my phone?
Click to expand...
Click to collapse
You can always boot to recovery. Just press and hold power and vol down (when powered off).
This is a build of Cyanogenmod 12.1 for the Tab S 8.4 LTE (SM-T705). This build is based on the last copy I had of Eousphoros' device tree source prior to them being deleted. All credit therefore goes to Eousphoros for the original port. I have only fixed a couple of build errors against the latest 12.1 source.
Please note that although I've checked that the basics are working there will probably be a few bugs. I don't think the device tree I had saved was the latest from the last of Eousphoros' builds so there may even be regressions from his last build. On the plus side the build should incorporate the security fixes in CM 12.1 since then.
I have limited spare time and I'm fairly new to building Android, so in all likelihood I won't be able to fix any issues you have quickly. I'll post a new build from time to time if people are interested, but don't expect daily / weekly builds.
**** Update 06/09/15 - I've made a new build which hopefully fixes the microphone during calls. Link is updated below.
**** Update 31/08/15 - It is my experience that the mobile data is a lot more stable if you have a KitKat radio installed and don't install the Lollipop libs. This is also backed up from comments in the thread I therefore recommend that if you plan on running this Rom you flash a KitKat radio. I use version T705XXU1ANF. I've put a link to this below (use the 'CP' slot in Odin).
Installation
Flash the zip file in recovery (I used TWRP)
Flash Google apps
If your coming from a stock Lollipop rom, rather than Kitkat, then you need to flash the lollipop-radio.zip. (this will give you the correct libs for the Lollipop baseband to get data working.) **** See note above. It is more stable to flash the KitKat modem.
Downloads
cm-12.1-20150904-UNOFFICIAL-klimtlte.zip https://www.dropbox.com/s/1ozly8yyupud727/cm-12.1-20150904-UNOFFICIAL-klimtlte.zip?dl=0
lollipop-radio.zip https://www.dropbox.com/s/9ag8lyrjk6twlre/lollipop-radio.zip?dl=0
modem.bin https://www.dropbox.com/s/fjhyr2tkgzzz10b/modem.bin?dl=0
These are also mirrored at the link below (Thanks to bu44er)
https://drive.google.com/open?id=0Bw9GrMgIwzUKTmdoTGNwdHZzV1k
Old Versions
cm-12.1-20150822-UNOFFICIAL-klimtlte.zip https://www.dropbox.com/s/0zs9xv7tqtoyyhu/cm-12.1-20150822-UNOFFICIAL-klimtlte.zip?dl=0
Source
Device Tree https://github.com/mtdoughty/android_device_samsung_klimtlte
Kernel https://github.com/mtdoughty/android_kernel_samsung_klimtwifi
Vendor Blobs https://github.com/mtdoughty/android_vendor_samsung_klimtlte
I have just downloaded the files and I am flashing immediately. I'm hoping data works because if it does I'm buying you a beer (please tell me you drink beer)?
---------- Post added at 11:42 PM ---------- Previous post was at 10:45 PM ----------
Works flawlessly here, data works and not had one issue. I owe you a beer.
Sent from my SM-T705 using Tapatalk
bu44er said:
I have just downloaded the files and I am flashing immediately. I'm hoping data works because if it does I'm buying you a beer (please tell me you drink beer)?
---------- Post added at 11:42 PM ---------- Previous post was at 10:45 PM ----------
Works flawlessly here, data works and not had one issue. I owe you a beer.
Sent from my SM-T705 using Tapatalk
Click to expand...
Click to collapse
Also call feature work?
mtdoughty said:
This is a build of Cyanogenmod 12.1 for the Tab S 8.4 LTE (SM-T705). This build is based on the last copy I had of Eousphoros' device tree source prior to them being deleted. All credit therefore goes to Eousphoros for the original port. I have only fixed a couple of build errors against the latest 12.1 source.
Please note that although I've checked that the basics are working there will probably be a few bugs. I don't think the device tree I had saved was the latest from the last of Eousphoros' builds so there may even be regressions from his last build. On the plus side the build should incorporate the security fixes in CM 12.1 since then.
I have limited spare time and I'm fairly new to building Android, so in all likelihood I won't be able to fix any issues you have quickly. I'll post a new build from time to time if people are interested, but don't expect daily / weekly builds.
Installation
Flash the zip file in recovery (I used TWRP)
Flash Google apps
If your coming from a stock Lollipop rom, rather than Kitkat, then you need to flash the lollipop-radio.zip. (this will give you the correct libs for the Lollipop baseband to get data working.)
Downloads
cm-12.1-20150822-UNOFFICIAL-klimtlte.zip https://www.dropbox.com/s/0zs9xv7tqtoyyhu/cm-12.1-20150822-UNOFFICIAL-klimtlte.zip?dl=0
lollipop-radio.zip https://www.dropbox.com/s/9ag8lyrjk6twlre/lollipop-radio.zip?dl=0
Source
Device Tree https://github.com/mtdoughty/android_device_samsung_klimtlte
Kernel https://github.com/mtdoughty/android_kernel_samsung_klimtwifi
Vendor Blobs https://github.com/mtdoughty/android_vendor_samsung_klimtlte
Click to expand...
Click to collapse
thanx a ton buddy downloading
will report bugs if found any
cant make phone calls unless using a earphones
and i even cant end or receive calls... waiting for fix
yep
pincakez said:
cant make phone calls unless using a earphones
and i even cant end or receive calls... waiting for fix
Click to expand...
Click to collapse
you're right mate, this is a known issue for eusphorous cm12 build and this is based on that rom so no doubt it also got that bug. Didn't yet tried the rom so that i can also give a feedback. downloading.
can you mirror it mate? too slow for me
I'm uploading the installation file and the lib files to my Google Drive. I'll share a link as soon as they have uploaded.
Sent from my SM-T705 using Tapatalk
thank you!
bu44er said:
I'm uploading the installation file and the lib files to my Google Drive. I'll share a link as soon as they have uploaded.
Sent from my SM-T705 using Tapatalk
Click to expand...
Click to collapse
nice mate
https://drive.google.com/folder/d/0Bw9GrMgIwzUKTmdoTGNwdHZzV1k/edit
---------- Post added at 06:23 PM ---------- Previous post was at 06:23 PM ----------
That's the radio file, I just need to upload the flashable CyanogenMod
Thanks for your effort dude.
Hope that this project will help you to improve your skills and more developer can join this project to help you.
how the battery life? gaming temps?
My battery life was really good, been watching HD video all day
---------- Post added at 06:11 AM ---------- Previous post was at 05:54 AM ----------
Here is a link for anyone who would like the files. I've uploaded the installation files, radio files and the Google Apps Package I like using.
My Google Drive Folder
https://drive.google.com/open?id=0Bw9GrMgIwzUKTmdoTGNwdHZzV1k
@bu44er
many thanks for your great job !!!! you are the one and only, make offer to load a new CM 12.1 for my 705 !!! must flash it !!! thanks
Thanks should go to @mtdoughty as he's got everything work and has obviously worked hard doing so. I don't mind providing a permanent mirror for anyone who needs it.
Sent from my SM-T705 using Tapatalk
Thnx @mtdoughty, much appreciated, testing right now.
Hmm, for me, youtube is not working, video wont start to play. Do I need to flash libs or install additinal video players?
Update: oh, youtube works with chrome, but not with the default browser for me ... strange.
@muff99
perhaps it may be that YouTube indeed his own player with brings, but in CM 12.1 the link missing for stock player samsung? I was already with earlier versions. the same can happen if I use the stock player on my ironrom uninstall, because I prefer to work with the MX Player. is just a thought, not a fact.
all things work great
call dial nd ending can b achieved by another external dialer app
bug mic not working unless ur r on speaker phone or headset
Is data working?
Data is working for me but I can barely use the phone for calls as the sound is very bad and drop the call frequently. I've tried with earphones, BT headset and the tab itself with the same bad audio.
Anyone with the same symptoms?
Hi I was just given this tablet. It's a galaxy tab 2 10.1. so it's model number is gt-p5113. The android version is 4.2.2 build number jdq29.p5113ueucmk3
It was hardly ever used by the previous owner. When I charged it up and booted it up it was very very laggy. Of couse I did a factory reset fist thing. I went through and disabled all the useless apps on it. And it seems to be better.
I would.like to know if this tablet can be unlocked and install a clean version of Android on it. AOSP is what I would like to do with this. So is that possible? I have been using nexus and pixel for so long it's hard to remember all the stuff involved with doing all this. I would.like to get a newer version of Android on it. It doesn't have to be android 10 just a stable beer version. Is odin still the way to go with samsung? I do have android debug software on my PC so my pc should be good to go just need to install samsung drivers.
The main purpose of this tab is going to be for vision chats. I am moving so I want to be able.to see my nephew.
I. Not a rookie at flashing and modding but it has been a long time so if someone can give me a good place to start and there experienced with this tablet I would greatly appreciate it. If I can't put AOSP on then I will.jist disable as.much as I can and install pixel.launcher and all that and go that route. Just let me know what you pros think I'm open to whatever you guys have to say
Well for aosp try unlegacy android https://forum.xda-developers.com/ga...unified/rom-omap4-aosp-project-07-03-t3410092
---------- Post added at 12:31 PM ---------- Previous post was at 12:30 PM ----------
also its been long time i dont remember odin and stuff sry
Mithil17 said:
Well for aosp try unlegacy android https://forum.xda-developers.com/ga...unified/rom-omap4-aosp-project-07-03-t3410092
---------- Post added at 12:31 PM ---------- Previous post was at 12:30 PM ----------
also its been long time i dont remember odin and stuff sry
Click to expand...
Click to collapse
thank you for the suggestion. I was able to get 4.4.4 running completely aosp. Very nice and clean build. However I cant figure out root and I can't get anything higher than 4.4.4 going. It installs 6.0 but it won't boot. Most of the links in the galaxy tab form are not valid because this is so old. Is the file system different? How can i get 6 or 7 on this tablet? I can't even find stock files from Samsung to flash with Odin anymore. Do you have any valid linksorfilesfor this device? Or any advice on where to look? And again thank you for your help.
mojorisin7178 said:
thank you for the suggestion. I was able to get 4.4.4 running completely aosp. Very nice and clean build. However I cant figure out root and I can't get anything higher than 4.4.4 going. It installs 6.0 but it won't boot. Most of the links in the galaxy tab form are not valid because this is so old. Is the file system different? How can i get 6 or 7 on this tablet? I can't even find stock files from Samsung to flash with Odin anymore. Do you have any valid linksorfilesfor this device? Or any advice on where to look? And again thank you for your help.
Click to expand...
Click to collapse
Sounds like you forgot to wipe data when installing 6.0...
I got the stock 5113 files somewhere.. give me a few.
Find android andi's github. He's got a lot of information there
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
champ1919 said:
Sounds like you forgot to wipe them installing 6.0...
I got the stock 5113 files somewhere.. give me a few.
Find android andi's github. He's got a lot of information there
Click to expand...
Click to collapse
https://www.dropbox.com/s/skbw15p37ll0b2g/P5113UEUCMK3_P5113XACCND2_XAC.zip?dl=0
champ1919 said:
Sounds like you forgot to wipe data when installing 6.0...
I got the stock 5113 files somewhere.. give me a few.
Find android andi's github. He's got a lot of information there
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
https://www.dropbox.com/s/skbw15p37ll0b2g/P5113UEUCMK3_P5113XACCND2_XAC.zip?dl=0
Click to expand...
Click to collapse
Thank you again I appreciate it. I did wipe everything I even tried to redownload 6.0. The only thing I can think of is I am trying to install from the external sd card. Maybe I should try to put it on the internal sd card. But 4.4.4 works fine from the external card so I don't know. and oddly 4.4.4 only works with the pico gapps all other gapps make it not boot weird right? I have never come across that before. I never really had much luck modding tablets. And its been a long time since I did anything other than pixel/nexus. I am definitely a more pure android fanboy. anyway thanks again for pointing me in the right direction.
edit: Ah I feel like an idiot. I was using an older version of twrp i found a newer version thank to you. 6.0 booted with no problems!!!!
mojorisin7178 said:
thank you for the suggestion. I was able to get 4.4.4 running completely aosp. Very nice and clean build. However I cant figure out root and I can't get anything higher than 4.4.4 going. It installs 6.0 but it won't boot. Most of the links in the galaxy tab form are not valid because this is so old. Is the file system different? How can i get 6 or 7 on this tablet? I can't even find stock files from Samsung to flash with Odin anymore. Do you have any valid linksorfilesfor this device? Or any advice on where to look? And again thank you for your help.
Click to expand...
Click to collapse
Magisk for root ditch gapps I suggest you use andi's omni 7 if you can get nougat to run
mojorisin7178 said:
thank you for the suggestion. I was able to get 4.4.4 running completely aosp. Very nice and clean build. However I cant figure out root and I can't get anything higher than 4.4.4 going. It installs 6.0 but it won't boot. Most of the links in the galaxy tab form are not valid because this is so old. Is the file system different? How can i get 6 or 7 on this tablet? I can't even find stock files from Samsung to flash with Odin anymore. Do you have any valid linksorfilesfor this device? Or any advice on where to look? And again thank you for your help.
Click to expand...
Click to collapse
Well, for u hv boot issues with android 6.0 idk maybe u forgot to wipe data Do clean flashes!
And for the links go to http://andi34.github.io/