Database Users

Xperia X10i Flash Mode

Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.

Read the tuts in the dev forum. P.S. no custom roms yet but there is root.

TrevvyD said:
Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.
Click to expand...
Click to collapse
Try hold down "back button" without battery then insert USB cable and then insert battery.

When it says to hit enter, that is to continue from the screen (on the PC) that says "press any key to continue" when you are doing the steps for rooting. If you don't have that window ready the phone will only stay in flash mode for about 5 seconds and then it will continue to boot. So, just make sure you are ready with the PC before entering flash mode.

Dr_Wolodya said:
Try hold down "back button" without battery then insert USB cable and then insert battery.
Click to expand...
Click to collapse
thanks!!
this really helps!

My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.

johnmin said:
My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.
Click to expand...
Click to collapse
check drivers (install SE PC suite and let it atleast detect the phone once in FLASH mode)...
also it might help to disable any antivirus (worked for me)

cannot enter the flash mode
Hi,
I know this post is pretty old, but still I'm struglig the second day now to get into flash mode and still no luck despite trying every method there is on the web.
I've got Xperia X10i mini pro, reinstalled standard ROM with PC companion just to make sure it's nothing with the software or any modifications I made to it.
I'm guiding myself with instruction given here:
wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Mini_Pro:_Full_Update_Guide
in order to get my bootloader unlocked
what I've done so far:
-installed Android SDK incl. SDK Tools, SDK Platform-tools, Google USB driver package. Not installed any API from SDK.
-put android_winusb.inf (18 KB size) in C:\android-sdk-windows\extras\google\usb_driver
-in general- everyting given here: wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK#Windows
command
Code:
adb devices
rerurns
Code:
List of devices attached
43423531315537465737 device
in my opinion meaning it works as it should.
So I turn the phone off, unplug the cable both from computer and the phone, take the abttery out, plug both end of USB cable where these should be, hold the Back button (tried with Volume up too) and put the battery in.
The result is it only goes into flash mode for several seconds (confirmed by SuperOneClisk log) and then goes into charging mode. nothing gets displayed on the screen. Only when PC Companion is on it detects it, than looses it and pops up with a window on how to properly connect the device... :/
So can someone please tell me what I do wrong?
Why it doesn't stay in flash mode?
PS. when I enter *#*#7378423#*#* to access the service menu, after pressing the last * the numbers just disappear and nothing happens...
Pls help
Edit:
I somehow got around that with s1tool and Flashtool. But eventually I could not go along the way given at cyanogenmod.com and unlocked with the help of this: http://forum.xda-developers.com/showthread.php?t=1254225

help! my g2 only boots into fastboot

I was trying to install a custom recovery (twrp) by several different methods, with absolutely no luck (but that's another secondary issue at this point) and i screwed something up. Not exactly sure but i think the last thing I did was:
using "Rashr - Flash Tool" i think i went to "flash kernel from storage" then flashed boot.img.
now the phone goes immediately, directly into fastboot even without being connected to computer.
so i tried getting into the stock recovery by holding "volume down" and "power" until lg logo, releasing the reholding until factory reset screen. after choosing yes 2 times i get a
"boot certicification verify" or something message for about a second then it goes to this screen (sorry but apparently i haven't had enough posts on the forums to include clickable links.)
h**ps://drive.google.com/file/d/0BwQdFsCQ9KZVaGM1eWdJb25WVVU/view?usp=sharing

slplsnphx said:
I was trying to install a custom recovery (twrp) by several different methods, with absolutely no luck (but that's another secondary issue at this point) and i screwed something up. Not exactly sure but i think the last thing I did was:
using "Rashr - Flash Tool" i think i went to "flash kernel from storage" then flashed boot.img.
now the phone goes immediately, directly into fastboot even without being connected to computer.
so i tried getting into the stock recovery by holding "volume down" and "power" until lg logo, releasing the reholding until factory reset screen. after choosing yes 2 times i get a
"boot certicification verify" or something message for about a second then it goes to this screen (sorry but apparently i haven't had enough posts on the forums to include clickable links.)
h**ps://drive.google.com/file/d/0BwQdFsCQ9KZVaGM1eWdJb25WVVU/view?usp=sharing
Click to expand...
Click to collapse
if u still have acces to fastboot use this or u see many disk at windows use srktool http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076

amin44 said:
if u still have acces to fastboot use this or u see many disk at windows use srktool http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Click to expand...
Click to collapse
ok, i do have access to fastboot (actually, as soon as i power it on, it immediately is in foastboot mode, even without being connected to computer). i tried using srktool's repair tools via fastboot. it seems like it's working (ie phone shows that it receives command) but that's it. does it take a loooooong time or something?
btw, i can also get into download mode by holding "vol up" while plugging into computer. so, i tried using srktool utilites via download mode and nothing.
also, i just noticed that while connected to computer in download mode, in device manager it shows G2 under "portable devices" with an exclamation point on it.

slplsnphx said:
ok, i do have access to fastboot (actually, as soon as i power it on, it immediately is in foastboot mode, even without being connected to computer). i tried using srktool's repair tools via fastboot. it seems like it's working (ie phone shows that it receives command) but that's it. does it take a loooooong time or something?
btw, i can also get into download mode by holding "vol up" while plugging into computer. so, i tried using srktool utilites via download mode and nothing.
also, i just noticed that while connected to computer in download mode, in device manager it shows G2 under "portable devices" with an exclamation point on it.
Click to expand...
Click to collapse
are u sure u do not have franken phone open battery cover and see model written inside motherbord

amin44 said:
are u sure u do not have franken phone open battery cover and see model written inside motherbord
Click to expand...
Click to collapse
I haven't taken the back off (yet) but all indications are that it's an AT&T (D800).
What part of my description makes you think that it might be a franken phone?

Did you try connecting the phone in download mode or fastboot to the LG Mobile Support Tool and performing an upgrade recovery?

audit13 said:
Did you try connecting the phone in download mode or fastboot to the LG Mobile Support Tool and performing an upgrade recovery?
Click to expand...
Click to collapse
not sure what you mean by "lg mobile support tool". i googled it and found and installed "lg pc suite". is that the same thing?
nevermind that last question. i found and installed and tried the upgrade recovery tool but for some reason the phone wont go into download mode anymore. when i power it up whith ""vol +" help down, it shows download mode for a second, but then goes right into fastboot mode.

Is it recognized by the program in fastboot mode?
Here's the program I was referring to: http://www.lg.com/ca_en/support-mobile/lg-LGD803
Even though the program says it is for the 803, I used it to recover my international d802.

slplsnphx said:
not sure what you mean by "lg mobile support tool". i googled it and found and installed "lg pc suite". is that the same thing?
nevermind that last question. i found and installed and tried the upgrade recovery tool but for some reason the phone wont go into download mode anymore. when i power it up whith ""vol +" help down, it shows download mode for a second, but then goes right into fastboot mode.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404

amin44 said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
Thanks for the reply! But when I have phone connected to USB in fastboot, it shows up in device manager as "android device > USB modem phone port". Is that method the right fix for my situation?

ok, so likei said my phone is indeed in fastboot mode, connected to computer via usb (shows up in device manager as "android device > USB modem phone port". using srktool, i can send commands to the phone (command shows up on phone but thats it.....doesnt matter what command, it just sticks there until i unplug the phone then srktool shows the operation competed and phone shows
https://drive.google.com/file/d/0BwQdFsCQ9KZVSVg3OTZLcXV0N0E/view?usp=sharing
but none of operations actually complete on the phone.

slplsnphx said:
Thanks for the reply! But when I have phone connected to USB in fastboot, it shows up in device manager as "android device > USB modem phone port". Is that method the right fix for my situation?
Click to expand...
Click to collapse
that method fix for all situation

amin44 said:
that method fix for all situation
Click to expand...
Click to collapse
ok i shorted the capacitors, and eventually have gotten to where i can get into twrp. i assume that is serious progress, but what do i need to do next?

slplsnphx said:
ok i shorted the capacitors, and eventually have gotten to where i can get into twrp. i assume that is serious progress, but what do i need to do next?
Click to expand...
Click to collapse
flash stock ROM via download mode or flash custom ROM via twrp.
the first choice (stock ROM) is better

thanks for the responses!!
before i saw your reply, i flashed the stock .tot firmware and now i have my phone back.
but, before all this started, it was lollipop(5.0.2) and now it's Jellybean(4.2.2). i bought phone on ebay, so im assuming that it got lollipop via an ota update. so now i'm looking into flashing it back to lollipop. what's the easiest method to install stock lollipop?

Heavy Hard Brick Zuk Z1 international Version

HI everybody, I have a very big problem with my zuk. Trying to solve a problem about network, I thought to come back to stock via fastboot. But given that I was tired doing so many tries, I wrongly flash a zip file via fastboot instead of use adb, so the phone didn't turn on anymore. I must say first of all that it isn't my first phone, so I'm not a newbie. The real problem is: When I plug Zuk into my Pc( Windows 10) it isn't recognized as qhsusb_bulk ( It could be easy to solve the problem) but as "unknown usb device (Device Descriptor Request Failed)". I try to plug the phone pressing every button like Vol+ and power, Vol- and power but nothing to do. I' m already in Test Mode on Windows 10 and I deleted every Zuk or Qualcomm Drivers. Anyone can help me?
Thank you
Ps: Even If the screen is always off, Is there a way to boot into fastboot mode with hardware keys?

Xluk3 said:
HI everybody, I have a very big problem with my zuk. Trying to solve a problem about network, I thought to come back to stock via fastboot. But given that I was tired doing so many tries, I wrongly flash a zip file via fastboot instead of use adb, so the phone didn't turn on anymore. I must say first of all that it isn't my first phone, so I'm not a newbie. The real problem is: When I plug Zuk into my Pc( Windows 10) it isn't recognized as qhsusb_bulk ( It could be easy to solve the problem) but as "unknown usb device (Device Descriptor Request Failed)". I try to plug the phone pressing every button like Vol+ and power, Vol- and power but nothing to do. I' m already in Test Mode on Windows 10 and I deleted every Zuk or Qualcomm Drivers. Anyone can help me?
Thank you
Ps: Even If the screen is always off, Is there a way to boot into fastboot mode with hardware keys?
Click to expand...
Click to collapse
Not that I know,do you have the stock recovery or twrp?

I have the exact problem with my new zuk z1. Any idea is appreciated. The nice phone seems lost now.

Seems like you'll have to restore your zuk to the zui version again. Do you have qrst and zui version downloaded??

The service port never pops up
I do have the qpst and the zui rom. The main obstacle is that qualcomm service port never pop up.

Setup.zuk said:
I do have the qpst and the zui rom. The main obstacle is that qualcomm service port never pop up.
Click to expand...
Click to collapse
try this:
start QFIL from the QPST folder
Click browse on the programmer path row and select prog_emmc_firehose_8974.mbn from the directory where you unzipped the QPST ZUI ROM
and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone,
you may need to select port in the QFIL program and be quick with it, took me a few tries before I got it right so just take out the cable
and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal.
If everything went well then you should have ZUI loaded onto your phone and you are met with Chinese language as default.
On the first screen you are met with, just press the button in the bottom (on screen), then press cogwheel (which is the settings),
scroll down to yet another cogwheel in here which should be below a lock icon, then press second option in here and then the top option
to change language to english incase you cant make out the chinese and you should be good to go

Nikosstamatiou said:
try this:
start QFIL from the QPST folder
Click browse on the programmer path row and select prog_emmc_firehose_8974.mbn from the directory where you unzipped the QPST ZUI ROM
and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone,
you may need to select port in the QFIL program and be quick with it, took me a few tries before I got it right so just take out the cable
and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal.
If everything went well then you should have ZUI loaded onto your phone and you are met with Chinese language as default.
On the first screen you are met with, just press the button in the bottom (on screen), then press cogwheel (which is the settings),
scroll down to yet another cogwheel in here which should be below a lock icon, then press second option in here and then the top option
to change language to english incase you cant make out the chinese and you should be good to go
Click to expand...
Click to collapse
So i am having the same problem. The phone is not being recognized by the software. That is the whole problem. Any ideas?

Tarsa said:
So i am having the same problem. The phone is not being recognized by the software. That is the whole problem. Any ideas?
Click to expand...
Click to collapse
Actually, I think the problem is, that it will not reach the fastboot mode, due to the non-stop process of system-updating and boot-loop. I can observe for a very short time the message 'systemupdate will be installed' and then the screen becomes black again. This procedure is repeating every time. I will wait till the battery is empty and see, whether the boot with Volume-+--USB-cable will work.

mikarbach said:
Actually, I think the problem is, that it will not reach the fastboot mode, due to the non-stop process of system-updating and boot-loop. I can observe for a very short time the message 'systemupdate will be installed' and then the screen becomes black again. This procedure is repeating every time. I will wait till the battery is empty and see, whether the boot with Volume-+--USB-cable will work.
Click to expand...
Click to collapse
PLease do update me if you manage to fix it. This is getting very frustrating

I have the same problem, caused after a cyanogenmod update... Did someone fix this??

Another hard bricked Z1 here.
QFIL recognizes the phone (as Qualcomm 9008 etc.). So I am able to click Download, but after a few seconds, it fails with these errors:
Code:
[...]
Sending NOP
NOP: Fail Code: 9
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
in QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
in QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
I've tried many many times, and many different things. Still no luck .
I'd appreciate if anyone could input some new ideas of other stuff to try. Thanks

CarlosAir said:
Another hard bricked Z1 here.
QFIL recognizes the phone (as Qualcomm 9008 etc.). So I am able to click Download, but after a few seconds, it fails with these errors:
Code:
[...]
Sending NOP
NOP: Fail Code: 9
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
in QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
in QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
If tried many many times, and many different things. Still no luck .
I'd appreciate if anyone could input some new ideas of other stuff to try. Thanks
Click to expand...
Click to collapse
No idea, my device is actually dead.

mikarbach said:
No idea, my device is actually dead.
Click to expand...
Click to collapse
Aw .
I don't want to lose hope, but everything I've tried so far has failed. :| , and I don't know what else to try.

CarlosAir said:
Aw .
I don't want to lose hope, but everything I've tried so far has failed. :| , and I don't know what else to try.
Click to expand...
Click to collapse
Try another cable, another USB slot, another pc/laptop

mikarbach said:
No idea, my device is actually dead.
Click to expand...
Click to collapse
try to flash cos 12.1 with qfil.
its there somwhere on 4pda forum(search there).
Sent from my Z1 using XDA-Developers mobile app

So guys if I try to flash unofficial CM 13 do I risk bricking the device for good???

t.h.i said:
try to flash cos 12.1 with qfil.
its there somwhere on 4pda forum(search there).
Sent from my Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Of course I have tried this, with two different computers and two different USB cable, both actually working on my N5X. But the point is, that I do not reach the point, that qfil recognizes the phone. Also not with the trick of starting with power-button/USB-cable. It constantly tries to reboot and with adb I get a message 'not authorized' .
---------- Post added at 11:17 AM ---------- Previous post was at 11:05 AM ----------
carlese said:
So guys if I try to flash unofficial CM 13 do I risk bricking the device for good???
Click to expand...
Click to collapse
I think in my case the after the first successful CM13-snapshot-installation was two fold:
1. I have not enabled USB-debugging and do not have had connected it to my computer after the first CM13-installation.
2. Due to some unknown reason the automatically update via CM itself has boot looped.
The second point is not a real problem, I think. I have had a bootloop many times before with other phones, as well as with the Zuk, but I was always able to resolve the problem with adb. I think the first point was the problem, so adb wasn't possible, due to authorization problems. The reason why qfil does not work, I really do not know exactly, but qfil in fact was not able to recognize the phone.

I have the same problem. Totally bricked.
No charge, no PC recognise, nothing.
I tried with QFIL but the PC does not recognise the port.
I don't know what else I can do. Any ideas?
Thanks!

alexisdance said:
I have the same problem. Totally bricked.
No charge, no PC recognise, nothing.
I tried with QFIL but the PC does not recognise the port.
I don't know what else I can do. Any ideas?
Thanks!
Click to expand...
Click to collapse
Sry, no I do not have

Hello!
I have dealt with this sort of problem before and have successfully un-bricked my friend's device. I will be posting a guide to solve this problem soon.
Hang-on!

Bricked J3 2016 (SM-J320FN)

Hey there, I think my J3 2016 is bricked.
I accidently disabled the "OEM Unlock" in Developer Settings and now I am stuck at the samsung boot screen with a green text in left upper corner saying "Custom Binary blocked by FRP Lock".
I tried to flash the stock firmware with latest version of Odin, but the device isn't showing up. I have windows 7 and I reinstalled several times the drivers. My computer is recognizing it just as an Unknown Device.
Please help me, this is my only phone and at the moment I can't efford another one.

s4ss0 said:
Hey there, I think my J3 2016 is bricked.
I accidently disabled the "OEM Unlock" in Developer Settings and now I am stuck at the samsung boot screen with a green text in left upper corner saying "Custom Binary blocked by FRP Lock".
I tried to flash the stock firmware with latest version of Odin, but the device isn't showing up. I have windows 7 and I reinstalled several times the drivers. My computer is recognizing it just as an Unknown Device.
Please help me, this is my only phone and at the moment I can't efford another one.
Click to expand...
Click to collapse
It can be recovered (I've done that myself). Install Kies and smart switch for the drivers, reboot PC, Open Odin, put the stock firmware (preferably from sammobile) in the AP section, in options turn off auto-reboot, start phone in download mode (volume down, home button and power button together) and connect it,flash the firmware. When it's done reboot using vol up, down, home and power together until it turns on then switch on normally.
That's what worked for me, step by step.

Wulfie217 said:
It can be recovered (I've done that myself). Install Kies and smart switch for the drivers, reboot PC, Open Odin, put the stock firmware (preferably from sammobile) in the AP section, in options turn off auto-reboot, start phone in download mode (volume down, home button and power button together) and connect it,flash the firmware. When it's done reboot using vol up, down, home and power together until it turns on then switch on normally.
That's what worked for me, step by step.
Click to expand...
Click to collapse
The problem is that the phone isn't even showing in Device Manager. Installing and reinstalling drivers isn't useful.

s4ss0 said:
The problem is that the phone isn't even showing in Device Manager. Installing and reinstalling drivers isn't useful.
Click to expand...
Click to collapse
Hmm, I occasionally have issues if I use the wrong cable, have you tried changing that over?
The drivers should have sorted it out and made the phone visible really. I seem to remember that mine doesn't pop up in device manager if its in download mode (though that may be me remembering it wrong).

Wulfie217 said:
Hmm, I occasionally have issues if I use the wrong cable, have you tried changing that over?
The drivers should have sorted it out and made the phone visible really. I seem to remember that mine doesn't pop up in device manager if its in download mode (though that may be me remembering it wrong).
Click to expand...
Click to collapse
I have 6 cables, I've tried them all, not a single one works.

s4ss0 said:
I have 6 cables, I've tried them all, not a single one works.
Click to expand...
Click to collapse
Update; sometimes, if i connect the cable, the phone gets phisically found, but it isn't found like a device, just like "Unknown device". Can I do something?

s4ss0 said:
Update; sometimes, if i connect the cable, the phone gets phisically found, but it isn't found like a device, just like "Unknown device". Can I do something?
Click to expand...
Click to collapse
If no cables are working at all then I'm out of ideas sorry.
Ignoring Windows is a good bet, in download mode it often doesn't show up, focus more on whether or not you can see it in Odin, trying different versions of Odin can't hurt either I suppose.

Wulfie217 said:
If no cables are working at all then I'm out of ideas sorry.
Ignoring Windows is a good bet, in download mode it often doesn't show up, focus more on whether or not you can see it in Odin, trying different versions of Odin can't hurt either I suppose.
Click to expand...
Click to collapse
hey there, i just used an older version of odin as you told me and now it works. thanks for the help!

s4ss0 said:
hey there, i just used an older version of odin as you told me and now it works. thanks for the help!
Click to expand...
Click to collapse
No problem s4ss0, I'm glad it ended up being something fairly simple so you could get your phone back.

Connection issues
It is possible to get round the connection issue: Turn off the phone. Turn on the phone in download mode (vol-down, home, power). Connect a Samsung USB cable. Launch ODIN on your PC. Wait a few moments and you should see green text on top left of phone 'ODIN MODE'. Your phone is ready to take downloads.

PX6 Dasaita BootLoop after installing the wrong update

I was having issues with the bluetooth on my dasaita PX6 for my camry so I tried to install an update on it. little did I know that it was the wrong update. so It updated to android 11 and continues to be in a bootloop. No matter how long I press the RST button it will not load into recovery mode. I have tried what feels like to be countless methods but I am getting no result. please may someone help me.

RafRag said:
I was having issues with the bluetooth on my dasaita PX6 for my camry so I tried to install an update on it. little did I know that it was the wrong update. so It updated to android 11 and continues to be in a bootloop. No matter how long I press the RST button it will not load into recovery mode. I have tried what feels like to be countless methods but I am getting no result. please may someone help me.
Click to expand...
Click to collapse
Just use original software update provided from your seller

Anton TNT said:
Just use original software update provided from your seller
Click to expand...
Click to collapse
I really wish I could but the problem is that the headunit is not booting at all its stuck in a loop and it will not go into recovery mode thank you though!

RafRag said:
I really wish I could but the problem is that the headunit is not booting at all its stuck in a loop and it will not go into recovery mode thank you though!
Click to expand...
Click to collapse
Did you install an update or flashed ROM ?

Anton TNT said:
Did you install an update or flashed ROM ?
Click to expand...
Click to collapse
I installed an update. I accidentally installed android 11 thinking it was android 10

Use one of the updates for Anroid 10 and with correct resolution
(I presume you have any available)

Anton TNT said:
Use one of the updates for Anroid 10 and with correct resolution
(I presume you have any available)
Click to expand...
Click to collapse
I understand this now thanks but the problem is that I cant boot it into recovery or even get into the actual system because it is stuck on bootloop. I am going to try flashing the system in the morning. thanks again!

You don't need to bootup to update device!
Transfer offline update files to USB drive (unzip from file two files inside a zip file and put them only on USB) and next time system starts (USB must be attached to port) with car it will automatically start update procedure and finish.
After updating it must enter Android that is dependable on what update you will perform (right one).

Anton TNT said:
You don't need to bootup to update device!
Transfer offline update files to USB drive (unzip from file two files inside a zip file and put them only on USB) and next time system starts (USB must be attached to port) with car it will automatically start update procedure and finish.
After updating it must enter Android that is dependable on what update you will perform (right one).
Click to expand...
Click to collapse
Ok thank you I will try this right now and tell you how it goes!

hey I just tried to load the update on the usb then plug it it before the unit turns on but I still have no luck. the unit just stays stuck in a bootloop only showing the android logo. the reverse camera still works, but nothing else does it stays stuck on the android logo. I think flashing is the only way to save it.

Did you try to tap with finger in the middle of screen while USB is on and unit starts, to trigger update ?

Anton TNT said:
Did you try to tap with finger in the middle of screen while USB is on and unit starts, to trigger update ?
Click to expand...
Click to collapse
No I did not I will try this once the unit powers off

Anton TNT said:
Did you try to tap with finger in the middle of screen while USB is on and unit starts, to trigger update ?
Click to expand...
Click to collapse
do I have to tap the screen before I turn on the unit or once the unit is turned on?

Post Android system information including MCU version

marchnz said:
Post Android system information including MCU version
Click to expand...
Click to collapse
Im so sorry but where would I find that at? I currently cannot look into the system right now.

this is the screen im stuck on no matter how long I press the reset button for or whatever I do the headunit wont change. There are some instances where it will stop and restart doing the same thing it has been doing.

RafRag said:
do I have to tap the screen before I turn on the unit or once the unit is turned on?
Click to expand...
Click to collapse
start tapping as soon as you give contact or hear unit is booting up
If still no prevail, disconnect canbus box from the unit and start without it, then reconnect and see if corrects it self

Anton TNT said:
start tapping as soon as you give contact or hear unit is booting up
If still no prevail, disconnect canbus box from the unit and start without it, then reconnect and see if corrects it self
Click to expand...
Click to collapse
I tried to tap it as it loads up and still no prevail I do not know how to disconnect the canbus box. is there any tutorial on how to do this?

RafRag said:
I tried to tap it as it loads up and still no prevail I do not know how to disconnect the canbus box. is there any tutorial on how to do this?
Click to expand...
Click to collapse
You must detach canbus box from backside of device if you have cnbus at all, it is square box connected to wire harness.

Anton TNT said:
You must detach canbus box from backside of device if you have cnbus at all, it is square box connected to wire harness.
Click to expand...
Click to collapse
Ok got it! I will tell you how it goes!