I was having issues with the bluetooth on my dasaita PX6 for my camry so I tried to install an update on it. little did I know that it was the wrong update. so It updated to android 11 and continues to be in a bootloop. No matter how long I press the RST button it will not load into recovery mode. I have tried what feels like to be countless methods but I am getting no result. please may someone help me.
RafRag said:
I was having issues with the bluetooth on my dasaita PX6 for my camry so I tried to install an update on it. little did I know that it was the wrong update. so It updated to android 11 and continues to be in a bootloop. No matter how long I press the RST button it will not load into recovery mode. I have tried what feels like to be countless methods but I am getting no result. please may someone help me.
Click to expand...
Click to collapse
Just use original software update provided from your seller
Anton TNT said:
Just use original software update provided from your seller
Click to expand...
Click to collapse
I really wish I could but the problem is that the headunit is not booting at all its stuck in a loop and it will not go into recovery mode thank you though!
RafRag said:
I really wish I could but the problem is that the headunit is not booting at all its stuck in a loop and it will not go into recovery mode thank you though!
Click to expand...
Click to collapse
Did you install an update or flashed ROM ?
Anton TNT said:
Did you install an update or flashed ROM ?
Click to expand...
Click to collapse
I installed an update. I accidentally installed android 11 thinking it was android 10
Use one of the updates for Anroid 10 and with correct resolution
(I presume you have any available)
Anton TNT said:
Use one of the updates for Anroid 10 and with correct resolution
(I presume you have any available)
Click to expand...
Click to collapse
I understand this now thanks but the problem is that I cant boot it into recovery or even get into the actual system because it is stuck on bootloop. I am going to try flashing the system in the morning. thanks again!
You don't need to bootup to update device!
Transfer offline update files to USB drive (unzip from file two files inside a zip file and put them only on USB) and next time system starts (USB must be attached to port) with car it will automatically start update procedure and finish.
After updating it must enter Android that is dependable on what update you will perform (right one).
Anton TNT said:
You don't need to bootup to update device!
Transfer offline update files to USB drive (unzip from file two files inside a zip file and put them only on USB) and next time system starts (USB must be attached to port) with car it will automatically start update procedure and finish.
After updating it must enter Android that is dependable on what update you will perform (right one).
Click to expand...
Click to collapse
Ok thank you I will try this right now and tell you how it goes!
hey I just tried to load the update on the usb then plug it it before the unit turns on but I still have no luck. the unit just stays stuck in a bootloop only showing the android logo. the reverse camera still works, but nothing else does it stays stuck on the android logo. I think flashing is the only way to save it.
Did you try to tap with finger in the middle of screen while USB is on and unit starts, to trigger update ?
Anton TNT said:
Did you try to tap with finger in the middle of screen while USB is on and unit starts, to trigger update ?
Click to expand...
Click to collapse
No I did not I will try this once the unit powers off
Anton TNT said:
Did you try to tap with finger in the middle of screen while USB is on and unit starts, to trigger update ?
Click to expand...
Click to collapse
do I have to tap the screen before I turn on the unit or once the unit is turned on?
Post Android system information including MCU version
marchnz said:
Post Android system information including MCU version
Click to expand...
Click to collapse
Im so sorry but where would I find that at? I currently cannot look into the system right now.
this is the screen im stuck on no matter how long I press the reset button for or whatever I do the headunit wont change. There are some instances where it will stop and restart doing the same thing it has been doing.
RafRag said:
do I have to tap the screen before I turn on the unit or once the unit is turned on?
Click to expand...
Click to collapse
start tapping as soon as you give contact or hear unit is booting up
If still no prevail, disconnect canbus box from the unit and start without it, then reconnect and see if corrects it self
Anton TNT said:
start tapping as soon as you give contact or hear unit is booting up
If still no prevail, disconnect canbus box from the unit and start without it, then reconnect and see if corrects it self
Click to expand...
Click to collapse
I tried to tap it as it loads up and still no prevail I do not know how to disconnect the canbus box. is there any tutorial on how to do this?
RafRag said:
I tried to tap it as it loads up and still no prevail I do not know how to disconnect the canbus box. is there any tutorial on how to do this?
Click to expand...
Click to collapse
You must detach canbus box from backside of device if you have cnbus at all, it is square box connected to wire harness.
Anton TNT said:
You must detach canbus box from backside of device if you have cnbus at all, it is square box connected to wire harness.
Click to expand...
Click to collapse
Ok got it! I will tell you how it goes!
Related
Hey guys
My car head unit is from royal for hyundai elantra and it's stuck on the starting Android logo and can't get past it so can you please help me fix it? Thank you
No one has any idea on how to fix it?
Yasser_Atyah said:
No one has any idea on how to fix it?
Click to expand...
Click to collapse
It is probably in a boot loop. What did you install or do to get it in that boot loop?
If you didn't do anything, you might try to rest the unit or disconnect if from 12V and wait at least 2 hours.
And edit your first post to change the title. I assume it is "resetting" and not "resting"
surfer63 said:
It is probably in a boot loop. What did you install or do to get it in that boot loop?
If you didn't do anything, you might try to rest the unit or disconnect if from 12V and wait at least 2 hours.
And edit your first post to change the title. I assume it is "resetting" and not "resting"
Click to expand...
Click to collapse
1- no I didn't do anything to it. It was working perfectly and I had to switch the car off and then turned it on the boot loop issue started.
2- how do I disconnect it from 12v? Sorry but I am have zero experience when it comes to cars.
3- and you are right it's resetting but I have no idea how to edit the title of thread.
Yasser_Atyah said:
1- no I didn't do anything to it. It was working perfectly and I had to switch the car off and then turned it on the boot loop issue started.
2- how do I disconnect it from 12v? Sorry but I am have zero experience when it comes to cars.
3- and you are right it's resetting but I have no idea how to edit the title of thread.
Click to expand...
Click to collapse
2- Get it out of the dashboard and disconnect the harness or the power plug or take the fuse out.
3- like I said. Edit the first post. It will also make the title editable.
Do you have a small reset hole in the front of your unit? If so, try to reset it with a "pointy" thing like a needle or something else.
Try what surfer63 says, because he has way more experience than most of the people about Android Head Units on this board. If all else fails try what I did after having a bootlooping HU for nearly 4 months :S
Had the same issue. The HU (with 2 USB ports) was some unknown brand called Funrover loosely based on Joying firmware. What worked for me was
- Download the suitable Joying firmware : joyingauto.com/blog/post/joying-intel-sofia-android-car-stereo-software-update
- Extract it on the PC and then copy the firmware files on to a freshly (FAT32) formatted USB drive
- Plug in the USB drive to your HU USB port (1?)
- Since your HU is already bootlooping, plug in a keyboard and use the following key combination> Alt + Print Scr + tapping i (or e, both worked for me) to get in to recover
- Ideally the recovery option will detect the plugged in USB and start reflashing the firmware so that you will be able to use the HU again.
Hello! I recently purchased a navigation for my Golf 5 2008, it's a mekede 188l 8227L but i have an annoying problem...it's not keeping settings, if i make a change on the screen, idk, the wallpaper for example, after restarting it(removing the key from the ignition) and powering on, the settings are like defaults...even the language setting are resetting....what can i do?
And also i have a problem with the parking sensors...i have installed the rear camera, it works when i put ihe car in reverse mode but the sensors are not working, it's not displaying anything.
Thanks!
Hi, I think the wiring is wrong u use the ignition line but you must use the battery line to have continuous power. Sry for my bad English I hope u understand a little bit.
The ignition line is to power/boot up the head unit the battery line is to keep little bit power for the standby.
Regards
Aggro82
Okay, but if i connect those wires, it will drain my battery?
Connect the yellow wire to the battery 12+ constant, and the red wire to the ignition (Acc) wire
hi
i have the same problem
DO NOT connect the car radio to the battery
this is not a solution
the problem you have is the Firmware 100%
ask the seller for another firmware or try this
Download the Firmware from the link
https://yadi.sk/d/9hmrLUB8am6U7Q?spm...14913e5fbGNit4
download the file and copy the file to a usb stick
but the usb stick in any usb input in the radio
start the car and try to touch to display as shown in this link
https://yadi.sk/i/vxhq6BQM3WVrWk?spm...14913e5fbGNit4
the Firmwere from the seller ,,, do not you worry
if you faced any problem with the firmware try the other firmware here
https://yadi.sk/d/-cPZ-gERgc5EKw?spm...14913e5fbGNit4
if you still face the same problem i will send you a firmware but have another launcher
fast and nice
i use it now and everything is ok expect the car info because i have seat altea
eithar.metal said:
hi
i have the same problem
DO NOT connect the car radio to the battery
this is not a solution
the problem you have is the Firmware 100%
ask the seller for another firmware or try this
Download the Firmware from the link
https://yadi.sk/d/9hmrLUB8am6U7Q?spm...14913e5fbGNit4
download the file and copy the file to a usb stick
but the usb stick in any usb input in the radio
start the car and try to touch to display as shown in this link
https://yadi.sk/i/vxhq6BQM3WVrWk?spm...14913e5fbGNit4
the Firmwere from the seller ,,, do not you worry
if you faced any problem with the firmware try the other firmware here
https://yadi.sk/d/-cPZ-gERgc5EKw?spm...14913e5fbGNit4
if you still face the same problem i will send you a firmware but have another launcher
fast and nice
i use it now and everything is ok expect the car info because i have seat altea
Click to expand...
Click to collapse
Hello. My name is Cristi . Can you send me origilal firmware because I deleted the preloader, boot, and all of the partition? Now my head unit is bricked. [email protected]
sharkyslro40 said:
Hello. My name is Cristi . Can you send me origilal firmware because I deleted the preloader, boot, and all of the partition? Now my head unit is bricked. [email protected]
Click to expand...
Click to collapse
Hello, Please i want firmware to upload my car radio from 8.1 to 10
the reference in attached file.
Thank you
Hi! I have a Topway ts8 product, how can I enter recovery mode? Help me please ?
This product only has a reset hole, and in addition does not have a physical key. I have tried many ways but cannot enter recovery mode.
I use Google Translate, so the grammar may be inaccurate, I hope everyone will be sympathetic and helpful
sontranpk said:
Hi! I have a Topway ts8 product, how can I enter recovery mode? Help me please ?
This product only has a reset hole, and in addition does not have a physical key. I have tried many ways but cannot enter recovery mode.
I use Google Translate, so the grammar may be inaccurate, I hope everyone will be sympathetic and helpful
Click to expand...
Click to collapse
Did you find out a way or solution?
sontranpk said:
Hi! I have a Topway ts8 product, how can I enter recovery mode? Help me please ?
This product only has a reset hole, and in addition does not have a physical key. I have tried many ways but cannot enter recovery mode.
I use Google Translate, so the grammar may be inaccurate, I hope everyone will be sympathetic and helpful
Click to expand...
Click to collapse
Hello. Did you manage?
Sorry to bring this topic on top again but does anyone have solution to enter recovery mode of this device? I tried to use five fingers to tap, swipe at left top corner, hold reset button… but doesn’t work. My HU is stuck at logo.
Thanks
What has been tried
Currently, I connected KEY2 line to ground, My screen displays "start update", I have a rom in USB but it doesn't recognize the rom, 3s later screen appears "update end".
I've resolved the problem "Device is stuck at logo and couldn't enter recovery mode" : check your Android head unit power cable, there is a line named KEY2. Connect this line to ground. reset your device (use reset hole) then on screen you will see : "update start", now you're in update mode. Make sure you plug your USB in with the firmware, all files will be installed automatically. Make sure you're using right firmware, if not 3s later, screen displays update end.
crayBoy said:
Currently, I connected KEY2 line to ground, My screen displays "start update", I have a rom in USB but it doesn't recognize the rom, 3s later screen appears "update end".
Click to expand...
Click to collapse
Hello! Kindly send me the ROM you used please. I need it badly. TIA.
Hello! May you send me the ROM you used cos I need it badly. TIA
crayBoy said:
I've resolved the problem "Device is stuck at logo and couldn't enter recovery mode" : check your Android head unit power cable, there is a line named KEY2. Connect this line to ground. reset your device (use reset hole) then on screen you will see : "update start", now you're in update mode. Make sure you plug your USB in with the firmware, all files will be installed automatically. Make sure you're using right firmware, if not 3s later, screen displays update end.
Click to expand...
Click to collapse
Waki093 said:
Hello! May you send me the ROM you used cos I need it badly. TIA
Click to expand...
Click to collapse
I mean I need the files in the USB you used to update your device. Can you share it to me please?
crayBoy said:
I've resolved the problem "Device is stuck at logo and couldn't enter recovery mode" : check your Android head unit power cable, there is a line named KEY2. Connect this line to ground. reset your device (use reset hole) then on screen you will see : "update start", now you're in update mode. Make sure you plug your USB in with the firmware, all files will be installed automatically. Make sure you're using right firmware, if not 3s later, screen displays update end.
Click to expand...
Click to collapse
Waki093 said:
I mean I need the files in the USB you used to update your device. Can you share it to me please?
Click to expand...
Click to collapse
Hi,
I am not sure what setting i have done or after updated system firmware. The easycon no longer working. Everytime i press the app icon, it went in and immediately kick out to the main icon screen.
Another issue is after updated the system firmware, the side touch panel lighting cannot be change colour. Floating button also gone missing.
Appreciate someone can help out.
I have t3_p1 1-16 Android 10 units. I reset it to factory settings. Screen mirror no longer works at all. Even the USB Car Play Dongle is not working. Is there a hero to offer a solution?
hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Badr_ps said:
our head unit should be connected to WiFi for the MCU up
Click to expand...
Click to collapse
Badr_ps said:
hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Click to expand...
Click to collapse
Thank you very much for the detailed explanation. I will try. I will share the result here.
famepa said:
Thank you very much for the detailed explanation. I will try. I will share the result here.
Click to expand...
Click to collapse
Hello again. I tried every option but it didn't work. Unable to connect via wifi mirror or cable. I think there is a hardware problem.
No encienden las luces de los botones laterales. No conecta el bluetooh.
Hi
I have a problem with quad core t3p1 android 9. It is stuck on the logo logo. Can anyone help me how to enter its recovery mode? Thanks
I also need help with how to enter recovery mode, anyone kindly assist.
Hello people
I ain’t so sure if I got ts18 or ts10 I can’t access the head unit to check, anyways I’m failing to boot my head unit it stuck on the logo
I tried to download fixes via seller’s website
And just never mind what what I tried it always ended the same
I tried to force and update via ignition method with rst button, and via attaching key1 wire to ground/negative
I got 2 usb ports one of them finishes the update so quick and do nothing
And the other one fails and write me this”init fat32 storage fail”
Hello any solution?
Murdysouly said:
Hello people
I ain’t so sure if I got ts18 or ts10 I can’t access the head unit to check, anyways I’m failing to boot my head unit it stuck on the logo
I tried to download fixes via seller’s website
And just never mind what what I tried it always ended the same
I tried to force and update via ignition method with rst button, and via attaching key1 wire to ground/negative
I got 2 usb ports one of them finishes the update so quick and do nothing
And the other one fails and write me this”init fat32 storage fail”
Click to expand...
Click to collapse
Hey there,
If the update completes really quick, maybe it's because it isn't going properly.
Try various other usb sticks.
Normally you should have the time to read every steps during the update "writing partition blabla1, writing partition blabla2 ..." aso asf.
I had to try a dozen usb sticks before finding one that worked for me.
May be worth the try.
Godspeed