Related
Hi there! I have a problem after install MAGLDR :/ I connected my HD2 to computer with ActiveSync, runned ROMUpdateUtility from computer, on my phone there was a tricolour screen, then self-reset and phone is freezing on white HTC LOGO. I tried to turn off my phone, remove battery... I'm also turning my phone on with press vol down + power - I have 3 colour screen and now what? PLEASE HELP!
Connect your HD2 to your laptop/pc... boot it while pressing volume down.. wait untill it says usb in the bottom of your screen. Now you can flash HSPL 2.08 and flash a custom or original rom.
I had the same.. gonna stick with RAM roms untill this is nand stuff is sorted out
I have the same problem... but after reflash HSPL 2.08 there will be no change. Could not start the machine.
How can flash rom from pc without booting the machine?
I couldn't understand "Now you can flash HSPL 2.08 and flash a custom or original rom." the second step ...
solved!
I had the same problem.
The issue it's the radio.
install 2.15.50.14
http://www.multiupload.com/QP0IWGY42F
Hi,
After installing hspl 2.08 and then going on to install magdlr, when successful and rebooting it just stayed on the HTC logo screen. It wont reset but it will enter into bootloader. How exactly do i fix this. I tried reinstalling HSPL but it is still stuck on that screen. How would i change this 'problematic radio'?
I relly need to fix my phone so any help would be appreciated! Thanks
sexyseamus said:
Hi,
After installing hspl 2.08 and then going on to install magdlr, when successful and rebooting it just stayed on the HTC logo screen. It wont reset but it will enter into bootloader. How exactly do i fix this. I tried reinstalling HSPL but it is still stuck on that screen. How would i change this 'problematic radio'?
I relly need to fix my phone so any help would be appreciated! Thanks
Click to expand...
Click to collapse
Download a compatible radio (eg 2.15.50 in post above), boot to bootloader (switch off, vol down + power on (keep holding vol down until it boots), connect to pc and when usb shows on screen run the CustomRUU.exe in the radio download. (if there isn't one included you can take any one from a custom wm rom). You flash the radio the same way that you flash a rom.
Thanks for the quick response! I have tried doing this before and just tried the custom RUU posted above but when i run it where it says the image thats on the phone it is blank. Even so i click to update it and both on the phone and pc it stays at 0%. I don't know what to do!
sexyseamus said:
Thanks for the quick response! I have tried doing this before and just tried the custom RUU posted above but when i run it where it says the image thats on the phone it is blank. Even so i click to update it and both on the phone and pc it stays at 0%. I don't know what to do!
Click to expand...
Click to collapse
Are you sure you have HSPL installed properly. In bootloader mode, check the spl version - it should show as 2.08.hspl, not 2.08.0000 or any other hspl version.
In bootloader mode it says SPL 2.08.0000? When installing it i did select the HSPL 2.08?? What should i do? Thanks
sexyseamus said:
In bootloader mode it says SPL 2.08.0000? When installing it i did select the HSPL 2.08?? What should i do? Thanks
Click to expand...
Click to collapse
I had your problem and for some reason when I first ran hspl the first time and put 2.08 on my phone it said it worked but it didn't actually do anything.
Just reinstall 2.08 HSPL on your phone and then run MAGLDR.
Similar Scenario
I installed 2.08.HSPL - confirm at boot loader screen
I installed MAGLDR 1.13 with success
Flashed HD2_Core_Droid_Desire_HD_V1.5_NAND_ONLY_LEO1024_TMOUS to my phone with success
Phone worked fine for about a day and a half and froze up
Pulled battery and restarted to white screen
I can't seem to roll back the SPL, reinstall the MAGLDR, or install a different radio.
ROM Update Utility appears to start to work and phone restarts and I get an error message that the image is corrupt.
Any ideas?
Hi all
Newbie. And new to Phone Updates etc.....
Have HTC HD2 on O2. Was attempting to put NAND on it, followed the thread:
http://forum.xda-developers.com/showpost.php?p=11215136&postcount=8
All steps conpleted successfully, but after "Step C: Install MAGLDR"
The MAGLDR113 Rom updated the phone successfully, then it rebooted and is now stuck the O2 screen.
Any help would be appreciated.
what rom did you flash after you installed magldr?
try to flash magldr again
u got hspl 2.08 ?
Do you have the correct radio (2.15.50.14) ?
have you tried pressing the power button on booting?
Flash again winmo 6,5. After that flash HSPl 3.0. Flash radio 2.15.50. In boot screen ( hold power button and volume down) Flasyh Magldr.
I would say invisiblebm is right - reflashing again should help - cause as long as your reacts when you push the power button it is not dead
Hi all. Thanks for info.
Current state is that the phone is frozen at 02 welcome screen. Nothing happens when soft or hard boot.
When you boot holding down arrow I get
PB8110 SS-BC
SPL-3.03.hspl XE
0x05
cotullaHSPL 0x50
Unable to reflash, as the phone doesnt showup to the pc on usb, though the white part of the 4 colours RED/GREEN/BLUE/WHITE does change from serial to USB when you connect to the PC.
Phone shows up as a device "qualcomm cdma technologies MSM"
Is there anything more I can do save for sending back to O2.
Was at version o SPL 1.66.0000
I choose 3.03HSPL
Leo 2.15.50.14.rar contents - Via CustomRUU
The MAGLDR113 113 from the XDA Dev Site
Completed successfully, then rebooted, but didnt come up.
cheers
John
Even thought there is no apparent phone connection, it still connects if it switches from serial to USB. I had the same problem. Mine also said qualcomm techs. But when i reflashed MAGLDR using DAF.exe, it worked fine.
Can you post the link to the downlaod please
Just put the phone in bootloader, connect USB, when says "USB" on bottom of phone screen, its ready for flashing. Ignore the fact the PC doesn't seem to connect, the phrase "get an activesync connection" in the various tutorials is a pain in the arse, (even though it is technically correct.)
Anyway, magldr won't start cos you have the wrong hspl. As you already know because it says so in post 1 of the magldr thread, which you DID read, right? It says magldr will only work with 2.08.hspl, , , you have 3.03.hspl.
Enter bootloader, connect USB, run hspl4, choose 2.08.hspl and reboot, magldr should start.
So what I understud is , that the phone is not connecting to the PC. Try this:
Restart you PC, Go in to bootloader and try again, In most of the cases is some conection error between the devices. It hapen to me many times.
Thanks. Missed the SPL-3.03, rushing to do it. Its now on 2.08 and the loader comes up. Just the flash to do next. cheers
lesson of the day?
Always read the instructions 10 times
very very very true
Thanks to all fro your help btw, since running Nand, and now Gingerbread 2.3.
samsamuel said:
Just put the phone in bootloader, connect USB, when says "USB" on bottom of phone screen, its ready for flashing. Ignore the fact the PC doesn't seem to connect, the phrase "get an activesync connection" in the various tutorials is a pain in the arse, (even though it is technically correct.)
Anyway, magldr won't start cos you have the wrong hspl. As you already know because it says so in post 1 of the magldr thread, which you DID read, right? It says magldr will only work with 2.08.hspl, , , you have 3.03.hspl.
Enter bootloader, connect USB, run hspl4, choose 2.08.hspl and reboot, magldr should start.
Click to expand...
Click to collapse
CHEERS, you were a life saver.
Can someone please help. I went to the sticky thread to get all info to install android
http://forum.xda-developers.com/showthread.php?t=893948
My system information is:
ROM Version 3.14.531.1
Radio Version 2.15.50.14
I started with loading HSPL on my phone being my radio is 2.15.50.14 which is a requirement for HSPL4. When I install HSPL I connect my phone via sync and the computer detects it and runs through the install. It even shows the "We Hacked It" screen on my phone as its supposed to but when I hold volume down and the power button my phone doesn't show HSPL 2.08, I only see SPL-2.10.0000 8G XE
When I tried to continue loading Magldr from there I get an error and I can't go any farther. Can someone please help, how do I get HSPL to actually load which will allow me to load Magldr.
Thanks
O
What error do you get?
Try manually going into bootloader by holding down the Volume Down button and then powering on phone (still holding volume down).
Then plug in USB and load up MAGLDR DFT flasher.
Thanks TheATHEiST
However I can't get to the bootloader page. I corrected my previous post when I hold the volume button and power button down I get the four color screen that only shows the SPL version I have. I don't know why the HSPL flash doesn't work.
i searched and searched all over xda but no thread could give any definite answer.
here's a summary of my problem:
I've been using android on my phone through NAND for quite a while, but the "tinkerish" part of me wanted to try windows phone 7 for a while. i "had" spl 2.08 and the correct radio, magloader also installed. but the problem was that i needed to perform task29 from hd2 toolkit but my phone wasn't being detected by pc...giving he "qualcomm driver" thingy....so i figured flashing a stock win 6.5 from sd card will make an easy alternative task 29 wipe then use active sync and reinstall hd2 driver....i tried the 3.14 wwe rom but it failed and now my phone is stuck at bootloader....can't DO ANYTHING!
it gives:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(touch) 0x30
please don't ask me to search and stuff...i'm kinda desperate now :/
Hey u have spl 3, and not hspl, the thing works with hspl 2.08 and not higher. Try installing hspl using hd2 tool kit.
Sent from my HTC HD2 using xda premium
Hi,
I have also faced similar situation.
I am to a newbie like you, see this thread it might be useful for you.
Best Regards,
Vikas
Try flash through RUU.exe
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
i cant go to bootloader,how to get back to windows 6.5?
the tricolor is bootloader ... hold vol down button + power. when you get the tricolor then flash whatever you heart desires (id personally start with hspl 2.08) then your options are limitless.
i cant go to bootloader becouse the volume key not work,what to do now?
ummmm :-S i would hate to be you friend!
hey, tricolor is NOT boot loader, that is the native recovery....
bootloaders are magldr and clk...and native wm bootloader also...
if your vol key is broken you have nothing to do....like dead I think...you need to enter into recovery for do anything! repair it if you want back your sweet phone
throcker said:
hey, tricolor is NOT boot loader, that is the native recovery....
bootloaders are magldr and clk...and native wm bootloader also...
if your vol key is broken you have nothing to do....like dead I think...you need to enter into recovery for do anything! repair it if you want back your sweet phone
Click to expand...
Click to collapse
The tricolor screen is the bootloader, and even if I'm wrong (I may well be) then everyone refers to it as the bootloader and you should also refer to it as the bootloader in order to make things clear and not cause confusion, it just makes things much better that way. Most people refer to cLK and MAGLDR as cLK and MAGLDR anyway, so there isn't much point in trying to change things.
Nigeldg said:
The tricolor screen is the bootloader, and even if I'm wrong (I may well be) then everyone refers to it as the bootloader and you should also refer to it as the bootloader in order to make things clear and not cause confusion, it just makes things much better that way. Most people refer to cLK and MAGLDR as cLK and MAGLDR anyway, so there isn't much point in trying to change things.
Click to expand...
Click to collapse
+1
Flashing back to window does not require volume key.
Are you with tmo or eu?
If you are tmo I do have a file that work if you want to revert back to window 6.5.
Try this for getting back to win6.5
I use it all the time when in trouble, and it always gets me out of trouble.
First things first.....first post!
Ok so I have the HD2 512 version and have put hspl 2.08 on it with no problems but when I have tried loading magldr1.13 the install seems to go ok on the phone but when it reboots magldr doesnt launch it simply stays on the default white htc launch screen.
My own fault for following a youtube video I guess.
The handset lets me reflash magldr which I did a couple of times and I tried an older version of magldr and also used the nand toolkit to try and install magldr but still the same white screen on launch.
Any ideas whats going on anyone? help appreciated with thanks
PeteLeMeat said:
First things first.....first post!
Ok so I have the HD2 512 version and have put hspl 2.08 on it with no problems but when I have tried loading magldr1.13 the install seems to go ok on the phone but when it reboots magldr doesnt launch it simply stays on the default white htc launch screen.
My own fault for following a youtube video I guess.
The handset lets me reflash magldr which I did a couple of times and I tried an older version of magldr and also used the nand toolkit to try and install magldr but still the same white screen on launch.
Any ideas whats going on anyone? help appreciated with thanks
Click to expand...
Click to collapse
Are you sure you installed HSPL correct? Hold down the volume button and press the power button, till the rainbow screen, does it say something about cotulla hspl? If yes, connect the phone to the computer(still in the rainbow screen of course) and wipe the device(task29). After that your device will be totally clean and the correct radio is installed. So you will have to press the volume down button again to enter the rainbow screen and then install magldr.
Yes it does say cotulla.
So I tried what you said I connected in rainbow screen and pressed wipe(task 29) in the nand toolkit (wipe from the toolkit right?) but in the rainbow screen it says cotulla still,
tried magldr again, same white screen
when you saying "launching Mgldr", are you pressing the power button(end key) when the phone boots? this way only you enter Mgldr and loads the menu
Yes I have tried holding the power button on powering on the device and tried it without holding, still the same white htc screen and no movement from there.
When I wipe the handset it still has SPL-2.08.HSPL on it and still says CollutaHSPL.
I'm guessing I should try and restart from scratch??
you havent flashed a compatible radio yet, , magldr wont start without it.
enter bootloader
usb
flash radio 2.15.50
reboot
magldr.
Ok I will try that now. Is radio 2.15.50.14 ok?
Wahey! I'm in!
Thanks very much you guys are legends!
Right next step haha. Don't worry I'll read up on it don't want to hassle anyone.
Any suggestions what are the best roms for WP7 or ICS??
(and if you have time point me in the right direction of them)
Any other step I am missing?
Again thanks for your help
Different people, different needs
Check some threads (also Search, will not hurt you )
http://forum.xda-developers.com/showthread.php?t=1656171
http://forum.xda-developers.com/showthread.php?t=1430276
http://forum.xda-developers.com/showthread.php?t=955268
http://forum.xda-developers.com/showthread.php?t=1678153
http://forum.xda-developers.com/showthread.php?t=1670456
Flashing guides - in my signature