Hello, is it possible for someone with the BS2 SKW_H0 or SKW_A0 to share the folder of sensors? root/mnt/vendor/persist/sensors I flashed a global android 9 in a cn version and was working great, then i rooted my bs and the proximity, accelerometer and gyroscope sensors stop working. Please Send Help!
What version and variant of Android Pie did you flash? My device was also CN and I flashed the Global variant (S00) MP3 firmware from ripiad's thread and successfully rooted it without any issues in sensors or whatsoever.
Perhaps you flashed either Global EU (SO1) firmware or the MP6 version of either Global variants. Make sure you flash S01 MP3 firmware.
Related
Forum friends good night. I tried installing nougat 7.0 on my g4 plus bike and it stopped picking up the operator signal and disappeared the digital sensor settings as shown in the photos. You have tried several rom stock and the same does not work the chip and digital sensor. Thanks to the friends who help because my phone turned a paper weight.
The baseband version of it is now m8952_70030.25.03.62R DFLT_FSG
:rolar os olhos:
What is your exact model? XT1643 or XT1644. What link did you use to download your "stock" Nougat rom? You can flash the fingerprint sensor zip to fix this easily.
HueyT said:
What is your exact model? XT1643 or XT1644. What link did you use to download your "stock" Nougat rom? You can flash the fingerprint sensor zip to fix this easily.
Click to expand...
Click to collapse
Friend my model and the XT1640 BRAZIL. Already installed several stock rom but baseband does not change to the correct one and athene_brazil_dsds_cust is so DFLT_FSG
You would have the digital sensor zip and how to install it.
wellington nunes said:
Friend my model and the XT1640 BRAZIL. Already installed several stock rom but baseband does not change to the correct one and athene_brazil_dsds_cust is so DFLT_FSG
You would have the digital sensor zip and how to install it.
Click to expand...
Click to collapse
https://firmware.center/firmware/Mo...PJ24.139-50_cid50_subsidy-DEFAULT_CFC.xml.zip
Unzip it and fastboot it (search in Moto G4 Plus forum for directions how to fastboot stock firmware). Once you installed stock Marshmallow again, FingerPrint will work again. Basically your digital sensor zip from Marshmallow, and new Nougat firmware are not matching up
Hello i have indian version phone bouht from Flipkart, it used to show me ZB601KL
but recently i switched to Oreo from PIE with 0316 fastboot rom,
and later i updated with OTA
but now my phone is showing as ZB602KL
Please help me how can i get it back to original version, however phone does not have problem, all are good, except this model number
please help
Hello,
I just got a Redmi Note 7 Chinese variant but I live in India and the Chinese MIUI isn't that great. I want to change it to the global ROM. I have the fastboot ROM downloaded and even the recovery ROM. I'm hoping that someone has already addressed the issue but I'm posting this because I'm not able to find any. My phone is currently running MIUI China 10.2.13 and it has received the 10.3.4 update. I haven't updated it since it might increment the arb index. Can anyone give me a confirmed, safe and working method to change my software from China to Global? I understand the risks of bootloader unlocking and all.
I'm planning on buying Oneplus 8 Pro from China, then convert it into Global Rom. Does anyone know if flashing global rom will allow the device to receieve auto updates on the OS? Also will I be able to relock the bootloader after flashing the global rom?
Has anyone tried this? Thank you!
Yes you will receive updates. I've got the Chinese version and the seller flashed with official global rom.
J V A said:
I'm planning on buying Oneplus 8 Pro from China, then convert it into Global Rom. Does anyone know if flashing global rom will allow the device to receieve auto updates on the OS? Also will I be able to relock the bootloader after flashing the global rom?
Has anyone tried this? Thank you!
Click to expand...
Click to collapse
Yes you will I have EU version flashed with global rom, you can also use oxygen updater (from play store) to usually get updates early
Hi. As title says could someone share this tool for the CN HydrogenOS OP8P? No results show up online. There's a similar thread for the Oneplus 7T Pro Mclaren Edition.
Just in case, for safekeeping.
Thanks!
Bump.. does anyone know if the tool for H2OS exists?
just used it on my in2020 fine
don't think it matters just pick international and done
nvm different OS version
TheUndertaker21 said:
just used it on my in2020 fine
don't think it matters just pick international and done
nvm different OS version
Click to expand...
Click to collapse
Could you elaborate a bit:
What OOS did you have on your device prior to using international MSM?
Was it EU OOS, US OOS? They are actually the same software wise i think but it's not the same region.
Does your fingerprint still work after using the tool?
android2819 said:
Could you elaborate a bit:
What OOS did you have on your device prior to using international MSM?
Was it EU OOS, US OOS? They are actually the same software wise i think but it's not the same region.
Does your fingerprint still work after using the tool?
Click to expand...
Click to collapse
i had the latest version of OOS Installed and yeah it did and now im on DP4
TheUndertaker21 said:
i had the latest version of OOS Installed and yeah it did and now im on DP4
Click to expand...
Click to collapse
Ok so basically:
1.You bought your phone from China, it's the IN2020 chinese OP8P.
2.When you received it, you already had OOS on it, the seller made sure to flash it before shipping.
3. Can you tell me what was the latest OOS version you had prior to switching to DP4?
International/North American OOS is 10.5.13.IN11AA
European OOS is 10.5.12.IN11BA
I live in EU and once my device arrives i wanna make sure if the seller put EU OOS on it, in the case i brick the phone i can safely use the MSM tool which is tied to my OOS region.
Basically my confusion is: do i have to use the MSM tool of the device region or the MSM tool of the software region? That's it.
From what i understand, you had International / NA OOS on a Chinese phone and used international MSM and all works fine. Which means it's based on software region and not the device itself.
Thanks a bunch
Any Developer Have OnePlus 8 Pro CN IN2020 MSM Unbrick Tool For HydrogenOS Give Us For More Use
Please let's do get linkdownload