I've a Zenfone Max Pro M2 (6GB/64GB) which works perfectly fine.. But sometimes the screen turns B&W when I click the PW (power button) button to unlock the phone and the phone's touch stops responding.. Once again I've to click the PW button to lock the screen and press it again to so see the screen in color and now the touch works fine and i can unlock the phone.. Also, the phone vibrates frequently during calls.. I've not set any min reminder.. Does anyone have any solution for this or anyone facing same kind of issue.. Thanks in advance..
Related
Hey Guys
I have a problem: after putting my htc hd to sleep by pressing the on/off button, it happens sometimes that it just wont wake up - e.g. i want to use it, press the on/off button, but the screen stays black.
only think i can do is soft reset.
any1 have any ideas about this?
thx in advance
greetings, burobernd
BuroBernd said:
Hey Guys
I have a problem: after putting my htc hd to sleep by pressing the on/off button, it happens sometimes that it just wont wake up - e.g. i want to use it, press the on/off button, but the screen stays black.
only think i can do is soft reset.
any1 have any ideas about this?
thx in advance
greetings, burobernd
Click to expand...
Click to collapse
I have same problem....
Also, it happens to me when leave my HTC Touch HD on the charger overnight or just wear it while in my pocket, bag....!
Does anyone know what's the problem??
Please, help.....
???
I have same problem
They have a same problem, as I see -> Look at the topic named: Touch HD No Display
It seems that the solution is service and needed to change:
Mainboard
Flexible PCB
Display
And, everything should bi working fine.....
hey there.
does anyone know if there is any setting, application or way to permantly deactivate the black screen.
it would help me a lot because the "turn power on/off" button is broken, so if the screen of htc goes black, then i have to wait until somebody calls me in order to use my phone again.
thanks a lot in advance!
a simple way is to lift the stylus - than the screen will be working...
touch lock pro
seco10 said:
a simple way is to lift the stylus - than the screen will be working...
Click to expand...
Click to collapse
you can try touch lock pro and you will be able to switch screen off and on just with your stylus
Hey,
i have a problem. after i replaced my LG G2 Display with a new one, it makes problems. when i start to turn on the display, the display turns after 2 seconds off. after 5-6 trys the display works normal. is it a software bug or have i to install the display software? (hard reset)? maybe someone can help me...?
edit: if i try to turn on the display it will switch off after a second. okay. but if i try to turn on the display and press after the power button the volume button up or down it works normaly and no shut down... crazy.. i hope it is only a software bug. and the knock knock feature dosnt work for me. i can lock it with double tap but not unlock it with double tap
bozz59 said:
Hey,
i have a problem. after i replaced my LG G2 Display with a new one, it makes problems. when i start to turn on the display, the display turns after 2 seconds off. after 5-6 trys the display works normal. is it a software bug or have i to install the display software? (hard reset)? maybe someone can help me...?
edit: if i try to turn on the display it will switch off after a second. okay. but if i try to turn on the display and press after the power button the volume button up or down it works normaly and no shut down... crazy.. i hope it is only a software bug. and the knock knock feature dosnt work for me. i can lock it with double tap but not unlock it with double tap
Click to expand...
Click to collapse
It could be associated with kernel. Which ROM and kernel do you have?
Amel.Spahic said:
It could be associated with kernel. Which ROM and kernel do you have?
Click to expand...
Click to collapse
thank you for your answer!
but the problem is another one! Its the proximity sensor!!
the adhesive glue/tape from the new display unit is the main problem. the upper part from the new display unit does not stick properly. so there is a little distance between the display and the frame. and that is the reason why the proximity sensor is not working correctly. and this is the reason why my LG G2 is makin me crazy.
Hello Everyone..
What happened: my phone was suddenly stuck/freezed. I switched it off for a reboot but it never came up again. Now I am stuck with a black screen. The phone was not dropped, not exposed to water.Already triedower button short & power button for 10sec / 20sec ...Volume down & power buttonLeave it for dischargeCharging it over a long time (with original 1+ charger)Connect it to PC (does not recognize the phone)Nothing worked and I cannot access recovery mode.What it still does: it just vibrates occasionally when I press power or volume down & power. However, it stays black, no boot logo/splash screen. Very infrequently (maybe every 10th on/off) there is a short blink of a red warning sign, which i was able to record. It says the "battery is too low, charge for a while before..." even when charged for a long time!
You may have set e light wallpaper backgroud wallpaper that turned the pattern dot into blacks. So basically the dots are there . Draw your pattern by guessing the dots. The device wil be unlocked. Then change the wallpaper.
Mumenoon said:
Hello Everyone..
What happened: my phone was suddenly stuck/freezed. I switched it off for a reboot but it never came up again. Now I am stuck with a black screen. The phone was not dropped, not exposed to water.Already triedower button short & power button for 10sec / 20sec ...Volume down & power buttonLeave it for dischargeCharging it over a long time (with original 1+ charger)Connect it to PC (does not recognize the phone)Nothing worked and I cannot access recovery mode.What it still does: it just vibrates occasionally when I press power or volume down & power. However, it stays black, no boot logo/splash screen. Very infrequently (maybe every 10th on/off) there is a short blink of a red warning sign, which i was able to record. It says the "battery is too low, charge for a while before..." even when charged for a long time!
Click to expand...
Click to collapse
Sounds like a faulty usb port, now's the time to go to asus to see if they can fix it under warranty...
Hi! I have same phone and same problem. Have you gotten a solution yet?
Thanks
There must be battery problem, visit service centre
same problem with me
jon632 said:
Hi! I have same phone and same problem. Have you gotten a solution yet?
Thanks
Click to expand...
Click to collapse
hey brother i have same problem in my asus phone, have you got solution of this problem?? if solved then what was the issue??? please reply
Hello guys, my Nokia 6.1 Plus has developed a weird problem. When I turn on the phone the screen lights up as normal, displaying the androidone logo followed by the NOKIA logo before proceeding to the homescreen where it operates as normal. However, when I press the power button to turn the display off or when the display times out and goes off it doesn't wake up. It remains dark when I double tap on the screen or when I press the power button. The screen turns on but remains dark as I can feel it vibrate and respond to touch when I touch anywhere on the screen. I basically have to restart the phone to get it working again. The phone is basically unusable as I can't have the screen stay on all the time for me to use it.
What might be causing the problem and what can I do to remedy it?
Try to backup your important data and perform a factory reset.
May b it's hardware problem