Related
I'm having an issue when the Focus is charging. In this state, the lock screen will not slide up to give me access to the phone. Typically it will slide up about 1/4" only then comes back down.
Is there a setting for this or is this a feature ;-}
Anyone else having similar issues?
Problem Solved! See post 5.
I am able to unlock my phone while charging. Have you tried rebooting the phone and seeing if the problem persists after that?
Mine if fine and can lock/unlock/use while charging.
I can unlock, but I can't get into the settings menu at all when it's charging. I can do everything else, and get into settings in other ways if they're linked from a program, just not through the main interface while charging. It's very strange.
Problem Solved - Don't buy AT&T ZERO Charger Kit
Hi Everyone,
I found the problem causing my Focus to "pseudo Lock up" when charging.
As I was troubleshooting this problem, I first noticed my focus did not lockup when using a car charger or when plugged into my computer. This led me to consider why it was only happening when plugged into the wall. So, I tried a different charger, the one which came with my Focus, and there was no problem. Then I tried the charger that came with my Tilt 2, working fine there too.
So the problem is with the wall charger I was using. This charger is the AT&T ZERO Charger Kit. At this point, I am not sure if it the problem is with the individual charger or with the ZERO brand. I will be returning this charger tonight and at that time will ask them to allow me to try another one to see if the same problem manifests.
I will report back to let you all know.
MardiG said:
Hi Everyone,
I found the problem causing my Focus to "pseudo Lock up" when charging.
As I was troubleshooting this problem, I first noticed my focus did not lockup when using a car charger or when plugged into my computer. This led me to consider why it was only happening when plugged into the wall. So, I tried a different charger, the one which came with my Focus, and there was no problem. Then I tried the charger that came with my Tilt 2, working fine there too.
So the problem is with the wall charger I was using. This charger is the AT&T ZERO Charger Kit. At this point, I am not sure if it the problem is with the individual charger or with the ZERO brand. I will be returning this charger tonight and at that time will ask them to allow me to try another one to see if the same problem manifests.
I will report back to let you all know.
Click to expand...
Click to collapse
I second this! I was using an LG charger with same specs as the charger that came with Focus. It charged it but wouldn't let me use a lot of features of the phone. The stock charger works fine, as I use it at work all day. Another day of streaming from Zune and Last.FM for 6-7 hours!
Do not buy the AT&T ZERO Charging Kit
Hi Everyone,
So I confirmed the AT&T ZERO Charging Kit does not work properly with the Samsung Focus.
I returned the wall charger I purchased and while at the store, we opened another unit and tried it and the problem replicated.
At this point, I do not know if the problem is limited to the Focus or is all Windows Phones. If anyone else has a ZERO wall charger, and a different phone, please let us know your findings.
Do not buy this device to use with a Focus as it is not compatible with the Focus.
Same problem here - AT&T Zero charger and Focus will not unlock when charging. When I take the cable out of the charging brick and plug the cable into a USB port on my computer the phone resumes charging AND unlocks just fine.
The iGo charger that I have works fine no lock screen issues.
On a separate note, my work exchange server mandates the lock screen, but unlike WinMo 6.x you can't set the time interval when the lock screen activates. I had mine at 24 hours of dormancy before it would activate. WP7 only allows you to keep the screen on longer. I hope they add some more options for this. I can't stand having to punch in the four digit code every time I use the phone.
I am using the stock charger and it slides up 1/4 of the way several times then it finally sides up. The touch is then slow to respond, but it eventually works again. Anyone else having this issue? I have tried this charger and an old Tilt 2 charger.
Review of AT&T Zero Charging Kit
There is a review of the AT&T ZERO Charging Kit at:
http://cwmcgowen.wordpress.com/2010/11/28/review-att-zero-charging-kit/
This is the same charging kit that was incompatible with my Samsung Focus.
I should clarify the title by saying that trying to charge this phone is resulting in a number of odd results.
So firstly, I've tried using the wall-mounted AC charger. I then tried using USB on my computer, in 3 different usb ports. The phone was charging perfectly less than 24 hours before this problem began.
I plugged it in as per usual, and it didn't show the little lightning bolt on the batter icon like it should. It wasn't registering that it was plugged in. I tried plugging it into my PC, and it wasn't showing that it was connected via USB. In addition to that, my computer was failing to install the drivers for it. I went back to the AC charger, and tried a few different outlets, including one on a power strip. Nothing worked.
I searched online, and found that other people had this problem, and could only fix it by resetting to factory default settings. One person even had to do it twice to get it to work. So I did this, and it still didn't work. I tried charging my old phone with this Ac charger and cable, and it wouldn't work either. So I thought it must be a fault in the cable. So I dug up the cable (also micro-usb) for my old phone, and tried it. It worked just fine for my old phone, but my S4 still had the same problem, but with something new. It would say "Dock connected" but still not charge.
As of right now, it seems to be charging properly with my new AC mount and old usb cable, but I'm worried that this could happen again. Considering this seems to be a problem for other people too, what should I do about it? Is there some way to prevent this sort of thing from happening? Was it purely the other cable, given the fact that it didn't work with my old phone either? I'm on an extremely tight budget, and this phone is my only way of being contacted for job interviews, so having it in working order is very important. Any advice would be very appreciated!
Having exactly the same problem... couldn't find over the internet a solution yet or a position about it...
Affraid it's a hardware issue and have to send to the assistance...
Anyone know what to do?
Yup having the same issues - but i noticed only having charging issues when battery reaches 20% or the low battery notification pops up
it detects that a usb is connected but it wont charge
Solutions:
- dont let it go below 20 which is ****
- some people claim that if you use a 5pin charger instead of the 4pin which samsung includes solves the prob
Mine is a little more serious I think... haven't found a solution like that yet.
I have to connect/disconnect multiple times and it suddenly works.
But between those connects/disconnects it presents multiple problems, it appears on notification bar "Dock Connected", sometimes appears "Dock Connected" and on the notification bar appears "Suggested Apps (Anchoring)", other times it appears "Dock Connected" and the volume bar appears on the screen and stay there freeze (the phone works, but the bar doesn't disappear)... Sometimes the phone starts charging and suddenly stops, other times it says it's charging and if I remove the charger it keeps the charging symbol on the battery icon...
It's completely crazy, gonna take to service I guess.
Have you tried blowing out the usb connector on the phone with a can of compressed air?
If there is a minute piece of dust there it may be shorting something out - error that dock is connected. I know this happens to other phones, there was a big thread about it on the S3 forum. Might be a simple little thing like that...
Unfortunately that doesn't work for me, will send to service, let's see.
have you solved this problem and how?????
rokashi said:
I should clarify the title by saying that trying to charge this phone is resulting in a number of odd results.
So firstly, I've tried using the wall-mounted AC charger. I then tried using USB on my computer, in 3 different usb ports. The phone was charging perfectly less than 24 hours before this problem began.
I plugged it in as per usual, and it didn't show the little lightning bolt on the batter icon like it should. It wasn't registering that it was plugged in. I tried plugging it into my PC, and it wasn't showing that it was connected via USB. In addition to that, my computer was failing to install the drivers for it. I went back to the AC charger, and tried a few different outlets, including one on a power strip. Nothing worked.
I searched online, and found that other people had this problem, and could only fix it by resetting to factory default settings. One person even had to do it twice to get it to work. So I did this, and it still didn't work. I tried charging my old phone with this Ac charger and cable, and it wouldn't work either. So I thought it must be a fault in the cable. So I dug up the cable (also micro-usb) for my old phone, and tried it. It worked just fine for my old phone, but my S4 still had the same problem, but with something new. It would say "Dock connected" but still not charge.
As of right now, it seems to be charging properly with my new AC mount and old usb cable, but I'm worried that this could happen again. Considering this seems to be a problem for other people too, what should I do about it? Is there some way to prevent this sort of thing from happening? Was it purely the other cable, given the fact that it didn't work with my old phone either? I'm on an extremely tight budget, and this phone is my only way of being contacted for job interviews, so having it in working order is very important. Any advice would be very appreciated!
Click to expand...
Click to collapse
have u sved this problem ??
ihave same problem plz rply.
jkgohil29 said:
have u sved this problem ??
ihave same problem plz rply.
Click to expand...
Click to collapse
Yep, chalk up one more with the same problem!
At first I thought it had something to do with Aviate, a custom launcher from Yahoo (actually a pretty sweet one at that!)
But I guess not.
My work-around is to reboot the phone while connected. It charges fine while turned off and seems to keep charging when booting while plugged in.
Still... this is a stupid work-around and I want this fixed properly.
Any news from any of you guys?
ZonderZout said:
Yep, chalk up one more with the same problem!
At first I thought it had something to do with Aviate, a custom launcher from Yahoo (actually a pretty sweet one at that!)
But I guess not.
My work-around is to reboot the phone while connected. It charges fine while turned off and seems to keep charging when booting while plugged in.
Still... this is a stupid work-around and I want this fixed properly.
Any news from any of you guys?
Click to expand...
Click to collapse
Had this problem today. Suddenly out of nowhere "Dock is connected" message appeared after plugging the charger in and out. Tried to clean out the dock with stick and cotton on the edge. Then turned off and plugged in charger. Problem exists. Phone charges but stops regularly. It is very annoying when you dont know how to fix this kind of problem.
Any new solutions?
Right after this post, I froze the app "battery doctor 4.9.2" using Titanium Backup Pro (you can just uninstall it i guess). Then just plugged charger and now it's already Almost 90% without any interruption.
Sent from my GT-I9500 using XDA Free mobile app
Kamo777 said:
Right after this post, I froze the app "battery doctor 4.9.2" using Titanium Backup Pro (you can just uninstall it i guess). Then just plugged charger and now it's already Almost 90% without any interruption.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
Amazing! I've dealing with this problem for weeks and internet didn't give me any good answer, but the whole problem was a baterry monitor apk that for some reason was interfiering with the charger. Thank you so much!
I had this problem too and in my case it was a hardware problem. When i start the charging it kept repeating the start proces of charging with the vibration and the grey battery icon(in case the phone was turned off). The battery icon with the green charging light just didn't showed up. I tried many things but nothing helped. I let the phone keep charging for the whole night but in the morning i saw that it didn't charged anyway!
Then i went to a local phone reparation shop(none official samsung) and they knew immediately recognized the problem and it was the usb/charging connector where you plug it in the phone. They fixed it in 1 hour for a cheap price and from then(i think a few months ago) it charges back perfectly. It seems it's a disease with S4's.
In my previous post I was happy thinking that all this charging problems were solved after uninstalling battery apk. But, in fact, my S4 charges very slowly after that incident. I have tried two other samsung adapters (galaxy s4 mini; grand prime). First one results the same (up to 5 hours charging), the latter was comparably shorter (up to 3 hours), but still slower than it used to be (2 hours normally). So I highly suspected the hardware might be the reason. Thank you for your information, now I will also have the phone checked at some local repair shop. And give feedback of course.
Sent from my GT-I9500 using XDA Free mobile app
Kamo777 said:
In my previous post I was happy thinking that all this charging problems were solved after uninstalling battery apk. But, in fact, my S4 charges very slowly after that incident. I have tried two other samsung adapters (galaxy s4 mini; grand prime). First one results the same (up to 5 hours charging), the latter was comparably shorter (up to 3 hours), but still slower than it used to be (2 hours normally). So I highly suspected the hardware might be the reason. Thank you for your information, now I will also have the phone checked at some local repair shop. And give feedback of course.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
You probably got some water damage in your port. What you need to do is clean it. I used pure alcohol and a toothbrush for that. After that I flashed a custom kernel so I could enable fast charge true usb.
That's the reason your phone is charging slowly, it thinks it's connected true usb. So you need to boost the usb charging. After a few charge cycles I could revert back to my standard kernel and the problem was fixed.
I think ur right Lenny.
Mine S4 got wet last weekend and now i am also getting the " Dock is connected" message when i plug in the charger cable.
I can charge my phone but sometimes while charging i hear the sound go off and on what you hear when unplugging the charger.
I will try your solution and hope it will fix mine too. Thanks for posting ur tip!
I suggest you go buy a new genuine cable for an s4, the s4 does actually require a special cable capable of 2A charge rate otherwise you can end up in all sorts of bother.
Thank you all for sharing tips. I cleaned the port as suggested, then replaced my cable. Now everything is back to normal.
Sent from my GT-I9500 using XDA Free mobile app
Lucky you :good:
Same problem - galaxy s6
Hi there - same problem, on my 128gb s6. started this morning. Yesterday everything fine, would charge when connected via USB to both laptop and to regular samsung usb power unit. Have now tried 3 different USB cables including the samsung cable, 3 different usb power units and of course tried all 3 cables in laptop usb port. Have checked phone's usb port - clean as a whistle. Have rebooted both connected and unconnected. Started getting 'dock connected' message, now it just wont charge, although starts up fine. I take very good care of the phone, so no water damage or untoward shock damage (never get it wet, never drop it). Remaining battery charge seems to fluctuate between 30% and 40+ %, depending upon whether it's plugged in or not. If I turn it off, then connect usb cable, the phone just reboots, still not charging. I then turn it off and see no green battery charging screen, as I used to seen when connected but turned off. Should I just hard reset and take to repair shop? Still under warranty.
I would return the phone for a warranty repair. Software would not usually prevent the phone from charging when powered off.
As a final test, see if the s6 will charge wirelessly, assuming you have access to a qi charging pad and the s6 has a built-in qi receiver like the North American version of the s6.
So YD206 about a month old. Was connected to official yota charger (via a magnetic usb cable), noticed the plug at the phone end getting quite hot. Phone now essentially dead, wont boot, doesn't seem to charge. We also realised the charger had come out of the wall socket. But the yotaphone light was intermittently flashing on the charger.
Whilst I am inclined to blame the magnetic charging cable, is it possible for current to flow in reverse from phone to charger and essentially discharge the phone battery below acceptable levels?
Any advice on rebooting it (can't remove the battery like I would on a Samsung) so whats the procedure?
Just a follow up charger not the issue, it crashed in use and the power button became non-responsive, with the screen off, and the e-ink display on but also unresponsive. Did not turn on when connected to a charger. However when I connected it to my pc it did register in device manager as MTP device, so I knew it was still alive. Removed the sim and held the power button down for 10 seconds then it rebooted.
Hope this helps anyone else with a similar problem.
Failing that it would probably have to be left to discharge (might take a while if nothing is running) then powered back on with charger attached.
I have similar problem. My phone got hot while not charging (about 15% of battery) and crashed. Then forced reboot (hold power button for about 10 seconds) helped while phone was connected to Yota charger, battery was dead, but phone booted (EPD on, did not check rest) and got to about 81%. After removing it from charger, same thing happened again, no luck with forced reboot this time. Phone was blazing hot and did not respond, then crashed again. No response after connecting charger or forced reboot. Any experience with this issue appreciated.
SuperTukan said:
I have similar problem. My phone got hot while not charging (about 15% of battery) and crashed. Then forced reboot (hold power button for about 10 seconds) helped while phone was connected to Yota charger, battery was dead, but phone booted (EPD on, did not check rest) and got to about 81%. After removing it from charger, same thing happened again, no luck with forced reboot this time. Phone was blazing hot and did not respond, then crashed again. No response after connecting charger or forced reboot. Any experience with this issue appreciated.
Click to expand...
Click to collapse
It seems a battery issue. Have your Yotaphone a valid warranty?
casaprocida said:
It seems a battery issue. Have your Yotaphone a valid warranty?
Click to expand...
Click to collapse
I am not sure about my warranty, bought it off AliExpress, I guess I could try to send it to manufacurer (i heard Russia provides repair service).
EDIT ( t + 2 days): I managed to start my Yota again. I connected it to computer and after about 5 minutes, magic happened and phone started all by itself. I will try to find out more, will update this as soon as I find something
Man, you are more lucky than me, I have a dead yotaphone lying around here. It also died after connecting it to a bad power source.
In my case it was the usb-port of a monitor.
When I checked the usb-port with a cable with a volt/amp display I saw that it was going on and off very quickly.
But so I would say be careful where you connect your yotaphone to, it does not seem to handle weird power sources all too well.
tomgaga said:
Man, you are more lucky than me, I have a dead yotaphone lying around here. It also died after connecting it to a bad power source.
In my case it was the usb-port of a monitor.
When I checked the usb-port with a cable with a volt/amp display I saw that it was going on and off very quickly.
But so I would say be careful where you connect your yotaphone to, it does not seem to handle weird power sources all too well.
Click to expand...
Click to collapse
I actually thought about burning charging circuitry a lot. I wonder, if you would be able to test wireless charging. With some luck, it is independent enough to not be affected by burning micro usb charging route (depends where high voltage safety is implemented). If this make any sense to you, please give this a try (I think IKEA is place to go, they should have working wireless chargers in their model setups) and report back. If I am wrong in any aspect, I'd appreciate any correction with explanation.
SuperTukan said:
I actually thought about burning charging circuitry a lot. I wonder, if you would be able to test wireless charging. With some luck, it is independent enough to not be affected by burning micro usb charging route (depends where high voltage safety is implemented). If this make any sense to you, please give this a try (I think IKEA is place to go, they should have working wireless chargers in their model setups) and report back. If I am wrong in any aspect, I'd appreciate any correction with explanation.
Click to expand...
Click to collapse
Sorry for the late reply, did not see the quote, but it does not work with wireless charging either. I think the battery still has a lot of charge too. Thing is that the Motherboard also gets hot after a while when I try to charge it. I'm pretty sure my motherboard is dead. But I have another Yotaphone now, so maybe in the future I will test with every separable part replaced.
I use the charger from my iphone. It works great, although with the yotacharger also works well. Attention that I have a YotaPhone YD201 with Russian base and european compilation. Like I said the Iphone charger works great and doesn't warm my Yotaphone 2 . It might be a solution for your problems with charging.
So I have been running AICP 13.0 for a couple weeks and love it. I woke up this morning and my phone didn't charge overnight despite being plugged in. It shows it is connected (the lighting bolt in the battery icon on the top right) but the led light doesnt display and it doesnt say charging. Other weird thing is everytime I plug the cord in the volumne starts adjusting itself up and down automatically and now sound is not working (microphone or speaker audio). Battery is now draining and I cant get it to charge. Any ideas why this could be? I have tried it with numerous cords and charging bricks, did a factory reset but still can't get it to work. I am now down to 20 percent battery life and am worried I have a hardware problem and am going to be without a phone for a couple days.
Anyone experience similar things or have ideas to try?
Also leeco doesnt have a us website anymore, so how do I contact them for support if needed?
Only idea a hardreset or clear coch?
Sent from my LEX720 using xda premium
Well, go back to any eUI vendor ROM (basically, stock) and see if it solves the issue. Preferably the same firmware version that your device was originally on. It could be a hardware issue or a software issue.
Sounds like a faulty charging port. You might need to replace yours. You can find replacement charging ports on Aliexpress, and a teardown here: http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/ (the phone has the same internals as other LeEco phones, so you can consult various LeEco teardown videos too).
EDIT: now, I don't know if this will work for you, but freezing the phone for an hour might also get it to start charging again, but only do this as a last resort if it dies on you. And make sure you put it in a plastic bag first (obviously).
Ok I will locate the stock rom and flash it, I havent looked for it but it has to be on xda.
As far as replacing the charging port....I bought the phone in June so it should be under warranty correct? Does anyone know how we would get in touch with leeco support? Do we still have a warranty since they shut down operations in the US?
I still have 16 percent battery (I turned it off once I posted here so I could have juice to try ideas you guys would come up with, so hopefully I dont have to try the freezer trick.
sk8223 said:
Well, go back to any eUI vendor ROM (basically, stock) and see if it solves the issue. Preferably the same firmware version that your device was originally on. It could be a hardware issue or a software issue.
Sounds like a faulty charging port. You might need to replace yours. You can find replacement charging ports on Aliexpress, and a teardown here: http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/ (the phone has the same internals as other LeEco phones, so you can consult various LeEco teardown videos too).
EDIT: now, I don't know if this will work for you, but freezing the phone for an hour might also get it to start charging again, but only do this as a last resort if it dies on you. And make sure you put it in a plastic bag first (obviously).
Click to expand...
Click to collapse
Have you tried a different lead? I've had one leeco lead go on me, i almost chucked the charger until i realised it was the lead
Ymm, often the cable is broken.
Yes I have tried numerous cables and chargers. It has to be a hardware issue as it is dead now and won't charge at all is my thinking. When I plug a charging cord in it displays several quick red led blinks where it usually has the yellow led for charging but nothing else. When I tried it with my car charger this morning it got really hot very quickly.
jongordo8 said:
Yes I have tried numerous cables and chargers. It has to be a hardware issue as it is dead now and won't charge at all is my thinking. When I plug a charging cord in it displays several quick red led blinks where it usually has the yellow led for charging but nothing else. When I tried it with my car charger this morning it got really hot very quickly.
Click to expand...
Click to collapse
Sadly, the stock charger cable is known to destroy the charge port. If you have always used the stock charger cable, then that is probably what caused the issue . I had to get my phone replaced for that reason about a year ago. If you do end up getting it fixed, get a certified USB-C cable and scrap the one that came with the phone. So sorry man...you shouldn't have to deal with this.
I bought a Oneplus 6T a year ago. With 1 month of use, I noticed that his dash charge stopped working (charge only at normal speed).
As I have another oneplus at home (OP5) I tested the OP5 charger to know if this was the problem, but it didn't work.
So I tested both chargers on OP5, and both work the dash charge, so the problem is not on the charger nor cable.
I also tried to clean the phone connectors, tried factory reset, but it didnt work...
As my country did not have brand support, they could not help me.
What I want to know, it is there's anything else I can try to do to solve my problem.
If I could figure out that the problem is in the charger coonnector flat, I would import a replacement charge flat. But I'm worried that the problem is not in this piece, how can I find out?
PS: I never dropped my device, and there was never any contact with water or any accident. I don't know why the problem happened
In attach, the scrren of the charge test of the factorymode (original cable and charger)
Thank You!
BRUNO FORTE said:
I bought a Oneplus 6T a year ago. With 1 month of use, I noticed that his dash charge stopped working (charge only at normal speed).
As I have another oneplus at home (OP5) I tested the OP5 charger to know if this was the problem, but it didn't work.
So I tested both chargers on OP5, and both work the dash charge, so the problem is not on the charger nor cable.
I also tried to clean the phone connectors, tried factory reset, but it didnt work...
As my country did not have brand support, they could not help me.
What I want to know, it is there's anything else I can try to do to solve my problem.
If I could figure out that the problem is in the charger coonnector flat, I would import a replacement charge flat. But I'm worried that the problem is not in this piece, how can I find out?
PS: I never dropped my device, and there was never any contact with water or any accident. I don't know why the problem happened
In attach, the scrren of the charge test of the factorymode (original cable and charger)
Thank You!
Click to expand...
Click to collapse
did u use the original dash charge brick?
I had the 3rd party acc like pwerbank and car charger it does dash charge my op6t back on Android pie but it stopped working when i updated my devices to Android 10
They said on a10 they change the dash charge a bit thats why my 3rd part acc no longer works but my original dash charger brick still works
Thank you... Helpful information... Any solution?