UN-Lock Missing 5G Bands on OP8 Pro - OnePlus 8 Pro Questions & Answers

Hello Guyz,
Have been tinkering recently with trying to tweak my carrier_policy.xml file ( tutorial available here https://mt-tech.fi/en/modify-oneplus-7-pro-5g-8-and-8-pro-nr-lte-a-band-combos/ ) with Notepad++ in order to unlock more / as much as / all 5G bands I could possibly get from my device (CN IN2020).
Anyone has tried yet? It seems I can't manage to get 5G (yet) where I am at the moment (Thailand).
The main Telecom operators claim Oppo X2 can get 5G but they don't know about OP8 Pro... Well, the 2 devices aren't that different in their hardware, are they?
I attached my xml file on this thread.
Any help is more than welcome

Hi @Surfeur-des-Reves and nice you have found my site
Can you get log from me https://mt-tech.fi/en/how-to-get-4g...droid-phone/#OnePlus,_Oppo_and_RealMe_devices ? Put this Carrier Policy back to your phone and then just reboot. Please collect then logs so then i can confirm 5G support. Also you should able see 5G icon.
Do you have Oppo X2? Can you get log from Oppo device? Same method should work with Oppo too.
OnePlus have carrier policy just allow 5G certain networks. Other networks by default disabled. I don't know much Oppo but there could have similar system or not. It's just different configuration.

olkitu said:
Hi @Surfeur-des-Reves and nice you have found my site
Can you get log from me https://mt-tech.fi/en/how-to-get-4g...droid-phone/#OnePlus,_Oppo_and_RealMe_devices ? Put this Carrier Policy back to your phone and then just reboot. Please collect then logs so then i can confirm 5G support. Also you should able see 5G icon.
Do you have Oppo X2? Can you get log from Oppo device? Same method should work with Oppo too.
OnePlus have carrier policy just allow 5G certain networks. Other networks by default disabled. I don't know much Oppo but there could have similar system or not. It's just different configuration.
Click to expand...
Click to collapse
Hello Olkitu,
Thanks for coming back to me regarding this issue with 5G bands on OP8 Pro. Unfortunately, I cannot manage to get the required logs, as it says "cannot get logs" after I finish the process and want to get them. Moreover, I'm sorry, I don't have any Oppo X2...
I'll investigate with Oneplus Thailand and see if they can help me regarding my issue. Thanks for your kind help anyway

Surfeur-des-Reves said:
Hello Olkitu,
Thanks for coming back to me regarding this issue with 5G bands on OP8 Pro. Unfortunately, I cannot manage to get the required logs, as it says "cannot get logs" after I finish the process and want to get them. Moreover, I'm sorry, I don't have any Oppo X2...
I'll investigate with Oneplus Thailand and see if they can help me regarding my issue. Thanks for your kind help anyway
Click to expand...
Click to collapse
Strange error - do you have SIM-card in? Of course to get logs your phone must be connected to network. Or some reason this logcat doesn't work IN2020 model - it worked fine with other models... Just sad because that was only way i could confirm 5G support without root.

olkitu said:
Strange error - do you have SIM-card in? Of course to get logs your phone must be connected to network. Or some reason this logcat doesn't work IN2020 model - it worked fine with other models... Just sad because that was only way i could confirm 5G support without root.
Click to expand...
Click to collapse
Sure I have SIM card in my device, and I can get other logs but not this one, unfortunately. I don't know if it's because I'm using a custom kernel (CleanSlate 1.2.0) as well as xXx No-Limits 11.5 Magisk module or if it's some issue that is specific to my IN2020 model... One thing for sure, I am rooted, so if there is any other way for me to get the data you need, just let me know and I'll gladly follow your instructions.
Cheers!

Surfeur-des-Reves said:
Sure I have SIM card in my device, and I can get other logs but not this one, unfortunately. I don't know if it's because I'm using a custom kernel (CleanSlate 1.2.0) as well as xXx No-Limits 11.5 Magisk module or if it's some issue that is specific to my IN2020 model... One thing for sure, I am rooted, so if there is any other way for me to get the data you need, just let me know and I'll gladly follow your instructions.
Cheers!
Click to expand...
Click to collapse
Aah that custom kernel could cause this issue. That could be reason why logkit doesn't work. Maybe this kernel doesn't have diag so maybe QPST doesn't work too?

olkitu said:
Aah that custom kernel could cause this issue. That could be reason why logkit doesn't work. Maybe this kernel doesn't have diag so maybe QPST doesn't work too?
Click to expand...
Click to collapse
QPST works and I could easily get access to the carrier_policy.xml file, through EFS explorer. As you say, the custom kernel might be responsible and developer may have removed some "un-needed" logcats that would slow the CPU down. I will flash another kernel and see if I can get the logs we need, but even if I get them, I've no knowledge of python so I may forward you the log file directly instead, if you're ok with this.

Surfeur-des-Reves said:
QPST works and I could easily get access to the carrier_policy.xml file, through EFS explorer. As you say, the custom kernel might be responsible and developer may have removed some "un-needed" logcats that would slow the CPU down. I will flash another kernel and see if I can get the logs we need, but even if I get them, I've no knowledge of python so I may forward you the log file directly instead, if you're ok with this.
Click to expand...
Click to collapse
Yes i'm okay with qdml log file With scat there is also possible on fly record logs but it's bit more complicated. Hope get success with another kernel.

Do these instructions still work? I am in the same boat.

olkitu said:
Yes i'm okay with qdml log file With scat there is also possible on fly record logs but it's bit more complicated. Hope get success with another kernel.
Click to expand...
Click to collapse
Well, I have been trying to get those logs using 3 different kernels, with the same result, always the same error after the "log recording process" is finished: "Cannot get log" message. Anyway, it's okay, I can live with 4G+ instead of 5G. If there is any other way, please let me know. Thanks anyway

Surfeur-des-Reves said:
Well, I have been trying to get those logs using 3 different kernels, with the same result, always the same error after the "log recording process" is finished: "Cannot get log" message. Anyway, it's okay, I can live with 4G+ instead of 5G. If there is any other way, please let me know. Thanks anyway
Click to expand...
Click to collapse
Well i think you can get 5G working without logkit... I just was interested about your log and that log is way to confirm you have 5G enabled... Otherwise not easy really... With CellMapper you should of course see 5G details and when it's connected.

I've actuallyjust been told today by OnePlus Thailand that even though(some of) the 5G bands used by my carrier are compatible with my device OP8 pro, they are in 'testing phase' and it should be activated "by the end of the year".
Might be some bull**** though, hard to know for certain.

Surfeur-des-Reves said:
I've actuallyjust been told today by OnePlus Thailand that even though(some of) the 5G bands used by my carrier are compatible with my device OP8 pro, they are in 'testing phase' and it should be activated "by the end of the year".
Might be some bull**** though, hard to know for certain.
Click to expand...
Click to collapse
That could be possible. They like to test before enable 5G - i think about same as VoLTE/VoWIFI... But atleast we have hack to enable it manually...

root or no root settings database editor like in pics or activity launcher so you can enable bands is easy way

ecompton59 said:
root or no root settings database editor like in pics or activity launcher so you can enable bands is easy way
Click to expand...
Click to collapse
Can you please explain? I tried it and can't save the value

did you change from T-Mobile or eu to global if you're not rooted it may have issue sticking i enabled cbrs and changed rat to 20,19 i hit 200mbps been testing network hacks for speed I started at 20-40 and could only use 4g had to turn 5g off us why i had to try stuff

ecompton59 said:
did you change from T-Mobile or eu to global if you're not rooted it may have issue sticking i enabled cbrs and changed rat to 20,19 i hit 200mbps been testing network hacks for speed I started at 20-40 and could only use 4g had to turn 5g off us why i had to try stuff
Click to expand...
Click to collapse
Installed SetEdit but couldn't manage to get my modified settings saved, would definitely not survive a reboot anyway. About Launcher Activity, here is what I'm getting through RFToolkit:
https://imgur.com/7alNgsd
This is for the IN2020 Global phone. Wonder how to activate the 5G bands that are shown at the bottom of picture...

I'm also in Thailand and using AIS but my device is IN2023 purchased from AIS Store , are you on AIS as well? I have also tried editing the carrier policy and tried many different ones, but the most I could get was seeing this 5G DCNR Restricted(EPS Feature) = True in Cellmapper app. Also I have contacted both AIS and Oneplus and got the same reply as you did. I can't understand why they cannot enable it for Oneplus when they support Oppo Find X2 Pro.
---------- Post added at 10:37 AM ---------- Previous post was at 10:26 AM ----------
Surfeur-des-Reves said:
Installed SetEdit but couldn't manage to get my modified settings saved, would definitely not survive a reboot anyway. About Launcher Activity, here is what I'm getting through RFToolkit:
https://imgur.com/7alNgsd
This is for the IN2020 Global phone. Wonder how to activate the 5G bands that are shown at the bottom of picture...
Click to expand...
Click to collapse
I couldn't save the settings as well, just resets everytime you close and reopen the app, and my RFToolkit also doesnt have any NR bands ticked.

Dezzmond99 said:
I'm also in Thailand and using AIS but my device is IN2023 purchased from AIS Store , are you on AIS as well? I have also tried editing the carrier policy and tried many different ones, but the most I could get was seeing this 5G DCNR Restricted(EPS Feature) = True in Cellmapper app. Also I have contacted both AIS and Oneplus and got the same reply as you did. I can't understand why they cannot enable it for Oneplus when they support Oppo Find X2 Pro.
---------- Post added at 10:37 AM ---------- Previous post was at 10:26 AM ----------
I couldn't save the settings as well, just resets everytime you close and reopen the app, and my RFToolkit also doesnt have any NR bands ticked.
Click to expand...
Click to collapse
I am on True. I wish I could help more, but for now, I decided to go with their (already fast) 4G+. If any future update brings 5G here, it should and will be without modifying the carrier files or tweaking our phone.
By the way, are you also affected by the thermal throttling on your phone too?

Surfeur-des-Reves said:
I am on True. I wish I could help more, but for now, I decided to go with their (already fast) 4G+. If any future update brings 5G here, it should and will be without modifying the carrier files or tweaking our phone.
By the way, are you also affected by the thermal throttling on your phone too?
Click to expand...
Click to collapse
Yes, I was also waiting for them to bring it officially, but since its gonna take time, thats why i decided to play around with the carrier policy file as well.
And yes, my phone does heat up more than usual at times, most of the times when its on mobile data, and also during sunny outdoor conditions using camera etc brings up the overheating warning. But since the latest update 10.5.11 AA , I didn't experience this yet, but I'm not sure yet if they have brought some fixes or not since its too soon to tell. I don't have any thermal throttling when playing games though.

Related

Notice: IMSLogger+ potential malware preinstalled on our devices.

This bastard is an evil little logger application with access to everything but apparently no known function. Recommend Removal.
The.Jericho.Initiative said:
This bastard is an evil little logger application with access to everything but apparently no known function. Recommend Removal.
Click to expand...
Click to collapse
Whats the name of this app? So that i can uninstall it
Mangtas_666 said:
Whats the name of this app? So that i can uninstall it
Click to expand...
Click to collapse
IMSLogger+
I dont see it in my device by the name of IMSLOGGER. Iam an Indian user, confirm which region firmware are you on?
somekeystrokes said:
I dont see it in my device by the name of IMSLOGGER. Iam an Indian user, confirm which region firmware are you on?
Click to expand...
Click to collapse
G925VVZW1AOC3
I can verify it is present on both Verizon and T-Mobile devices.
Edit: Not sure if it is relevant to your situation but I found it when I was going through apps on Titanium Backup
The.Jericho.Initiative said:
G925VVZW1AOC3
I can verify it is present on both Verizon and T-Mobile devices.
Click to expand...
Click to collapse
if it is by this name only, then iam sure its not here in indian version. However thanks for informing!
I think IMS stands for IP Multimedia Subsystem used in the delivery of VOLTE.
tigabert said:
I think IMS stands for IP Multimedia Subsystem used in the delivery of VOLTE.
Click to expand...
Click to collapse
It's possible IMS Settings could have that purpose, I've seen mention of it in regard to some T-Mobile devices however IMSLogger+ has no known function whatsoever, it's simply an app called logger that has access to everything you do and everything your id does in relation to your device. As far as I can tell there is absolutely no cost in disabling this application so until someone can identify a function that requires this to be enabled, it's simply common sense to do so.
Further, and I have no idea if it's relevant or not, but even it's naming convention is different from the other associated applications:
com.sec.ims 1.0
IMS Service 1.0
IMS Settings 1.0
com.sec.imslogger 1.20150211_LDM
I understand I'm offering an incomplete picture here, but our corporate 'benefactors' have a long history of being as shady as they possibly can be until they are caught and then they just try something else... Our data is a commodity resource to these people so they'll do what they can to acquire it.
In the end it's a question of trust. I don't, so I uninstalled it, but I wanted to pass on the information should anyone else want to do the same.
Another NSA feature for the American fellows.
Besides imslogger+, I also have "silentlogging 1.01" in my Singapore device. Anyone knows what is "silentlogging" for?
Sent from my SM-G925I using xda premium
tigabert said:
Besides imslogger+, I also have "silentlogging 1.01" in my Singapore device. Anyone knows what is "silentlogging" for?
Sent from my SM-G925I using xda premium
Click to expand...
Click to collapse
Silentlogging 1.01
com.sec.modem.settings
Safe to disable
I've seen one post saying it's part of Kernal Management and a normal function of the phone however I've seen a hundred posts saying the package has been safely disabled or uninstalled without any discernible impact on device functionality. If anyone has an idea what this app does, I'd welcome any insight offered.
Edit: Maybe not a hundred, maybe closer to 10.
The.Jericho.Initiative said:
Silentlogging 1.01
com.sec.modem.settings
Safe to disable
I've seen one post saying it's part of Kernal Management and a normal function of the phone however I've seen a hundred posts saying the package has been safely disabled or uninstalled without any discernible impact on device functionality. If anyone has an idea what this app does, I'd welcome any insight offered.
Click to expand...
Click to collapse
I have G9250 unlocked variant for Taiwan. The app is there.
I also noticed another found under 12py0ny0u.dev.6.66 does nothing as far as I can tell, but have access to pretty much everything.
Try to uninstall/disable if you see it.
Oliv3 said:
I also noticed another found under 12py0ny0u.dev.6.66 does nothing as far as I can tell, but have access to pretty much everything.
Try to uninstall/disable if you see it.
Click to expand...
Click to collapse
I don't get it.
somekeystrokes said:
I dont see it in my device by the name of IMSLOGGER. Iam an Indian user, confirm which region firmware are you on?
Click to expand...
Click to collapse
If your country or carrier doesn't have VoLTE then you won't have it enabled on your phone, that's why you can't find it.
EDIT:
You can check here if your carrier has it:
http://en.wikipedia.org/wiki/VoLTE#Deployment
So far it's only launched in Canada, Czech Republic, Germany, Hong Kong, Japan, Singapore, South Africa, South Korea, and USA. But even in those countries, only a few carriers have it.
Good old NSA must have had something worked out with Samsung. I bought mine in Hung Coc* as well and it too came with this IMSlogger as well that has and asks for every permission you never even thought about. No uninstall option either.
Every permission possible has been ticked by developer.
The.Jericho.Initiative said:
Silentlogging 1.01
com.sec.modem.settings
Safe to disable
I've seen one post saying it's part of Kernal Management and a normal function of the phone however I've seen a hundred posts saying the package has been safely disabled or uninstalled without any discernible impact on device functionality. If anyone has an idea what this app does, I'd welcome any insight offered.
Edit: Maybe not a hundred, maybe closer to 10.
Click to expand...
Click to collapse
Silent Logging is not turned on by default that's why it's safe to disable.
From the looks of it, it logs diagnostic info from the cell modem. I think it's only ever used for diagnostic purposes though and is not ever turned on normally. You can enable in Service Mode or if you set system property dev.silentlog.on set to "on".
If you don't have any of the log files at:
Code:
/data/log/Slog_ril_xxxxx.log
/data/log/Slog_main_xxxxx.log (where xxxxx is the time the log got saved)
Or the config file at:
Code:
/data/slog/SilentLog
...then you don't have Silent Logging running.
As for IMSLogger, it doesn't look nefarious. It is for VoLTE though, so has anyone tried if VoLTE still work when you have IMSLogger disabled/deleted. Mind you, VoIP or Skype or any other IP/SIP over wifi or LTE is NOT VoLTE (VoLTE is specifically optimised for voice using IMS whereas none of the others are). So to test, make sure you are actually using VoLTE (and that you have it enabled in your carrier plan) and not some other VoIP solution.
It's LMS Logger
And it stands for LetMeSpy I found it on my phone as well
IMSLogger+ is used by Samsung engineers to get the processor logs and interfaces logs from the phone for debugging purposes. In Engineering firmwares it can export the IP traces in PCAP format and it has a nice interface to see all the VoLTE/SIP messages in real time. Basically it can log all the calls signalization, excluding the voice packets.
It's launched from the IMS Settings application that is used to customize VoLTE/VoWIFI/RCS parameters for each operator.
By default the IMSLogger+ doesn't log anything, Below you have a movie done from my rooted Samsung S6 Edge G925F that shows how to launch the application. I'm sure IMSLogger+ can be disabled without any impact to VoLTE. Maybe Samsung should have done it from the very beginning.
https://www.dropbox.com/s/px0xhymiyq4rdkt/2015_10_24_22_18_37.mp4?dl=0

Guide To Enabling Video Calling On Unlocked Note 8 With T-Mobile

Hey everyone, I got my unlocked Note 8 yesterday and have been using it with a T-Mobile sim card. I spent a bunch of time trying to get the built in video calling to work and I finally got it, so I thought I would post a guide so the next person doesn't have to do the leg work.
Here is what I did, and I can now call other T-Mobile users via dialer based video calls: (the one down side is all numbers show the video call option, even if they are not T-Mobile customers, the calls just turn into audio when the other person answers)
1. Download Shortcut Master from app store (Light version works, but it's a great app, support the dev if you can)
2. Open the app and go to the menu (three dot's top right) and select app explorer
3. Scroll down to IMS Settings and select it.
4. Scroll down to ImsSettingsLauncherActivity (last item on my list) select it and hit launch.
5. Select IMS Service Switch and under that turn on everything on that screen. (For me most things (especially RCS items) were disabled by default, but when I looked at a friends S8+ settings they were all on so I tried that and all works now.)
6. Make video calls!
That's it, you should be able to make video calls from the dialer now.
Hope this helps someone! Thanks to the app dev and everyone on here for all the help I have gotten over the years!
Hi, Can you help out enabling HD voice & video for us helpless VZW peeps with the unlocked version? Please!!!
dechutes said:
Hey everyone, I got my unlocked Note 8 yesterday and have been using it with a T-Mobile sim card. I spent a bunch of time trying to get the built in video calling to work and I finally got it, so I thought I would post a guide so the next person doesn't have to do the leg work.
Here is what I did, and I can now call other T-Mobile users via dialer based video calls: (the one down side is all numbers show the video call option, even if they are not T-Mobile customers, the calls just turn into audio when the other person answers)
1. Download Shortcut Master from app store (Light version works, but it's a great app, support the dev if you can)
2. Open the app and go to the menu (three dot's top right) and select app explorer
3. Scroll down to IMS Settings and select it.
4. Scroll down to ImsSettingsLauncherActivity (last item on my list) select it and hit launch.
5. Select IMS Service Switch and under that turn on everything on that screen. (For me most things (especially RCS items) were disabled by default, but when I looked at a friends S8+ settings they were all on so I tried that and all works now.)
6. Make video calls!
That's it, you should be able to make video calls from the dialer now.
Hope this helps someone! Thanks to the app dev and everyone on here for all the help I have gotten over the years!
Click to expand...
Click to collapse
Thank you. Will try if and when I get my n8 unlocked
How did you get this to work? i followed the guide and it shows the video icon in the dialer but when i call a friend with the exact same setup it says "video calling is currently not available" and then only does voice.
---------- Post added at 11:09 PM ---------- Previous post was at 11:04 PM ----------
Nevermind i got it ha. you gotta place the phone call as a normal call THEN hit the video icon during the call
Tried it for unlocked on Sprint...lol...no go..
.edit: video icon in phone app, have to test
I fixed hd calling
bambam126 said:
I fixed hd calling
Click to expand...
Click to collapse
How? Which provider?
handrade773 said:
How? Which provider?
Click to expand...
Click to collapse
I am on Verizon and I went into the settings like he said but looked around and I started provision and switched on everything now I have hd calling video and everything it's dope
I will have to try this on the Note 8 when I load the unlocked firmware on it.
bambam126 said:
I am on Verizon and I went into the settings like he said but looked around and I started provision and switched on everything now I have hd calling video and everything it's dope
Click to expand...
Click to collapse
Ok I got it HD VOLTE. You need to turn on provisioned on the settings. Thanks everyone .
handrade773 said:
Ok I got it HD VOLTE. You need to turn on provisioned on the settings. Thanks everyone .
Click to expand...
Click to collapse
Where did you find provisions in the settings?
Here is a screenshot.
Looking at that picture I don't even have a Self Provisioning option hmmm
Any way to get wifi calling working as well?
xxx42069 said:
Any way to get wifi calling working as well?
Click to expand...
Click to collapse
As far as I'm finding on XDA, we'll need to flash the CSC from a T-mobile device to get this working. When I googled it, I found this thread in the S8 forum with a utility for switching CSCs but I am not sure if it would work for the Note 8, and in my case really not sure if it would work to flash a Tmobile CSC (Snapdragon device) on my Korean Exynos model.
Anyway, check it out and let me know what you think: https://forum.xda-developers.com/ga...ility-flashable-csc-selection-v1-0-0-t3605264
Kalm_Traveler said:
As far as I'm finding on XDA, we'll need to flash the CSC from a T-mobile device to get this working. When I googled it, I found this thread in the S8 forum with a utility for switching CSCs but I am not sure if it would work for the Note 8, and in my case really not sure if it would work to flash a Tmobile CSC (Snapdragon device) on my Korean Exynos model.
Anyway, check it out and let me know what you think: https://forum.xda-developers.com/ga...ility-flashable-csc-selection-v1-0-0-t3605264
Click to expand...
Click to collapse
Thanks for the info!
xxx42069 said:
Any way to get wifi calling working as well?
Click to expand...
Click to collapse
I have an unlocked samsung using t-mobile with wifi calling.
i just made sure i was connected to wifi then it pops up in the upper left hand corner after a minute or 2
Megatron84 said:
I have an unlocked samsung using t-mobile with wifi calling.
i just made sure i was connected to wifi then it pops up in the upper left hand corner after a minute or 2
Click to expand...
Click to collapse
Interesting, good to know and thanks for the info. I won't be getting the unlocked one, I'm getting the international version for rooting so we'll see if it works with that. Sure hope it does because tmobile reception is abysmal where I live.
I have a t moble variant, I want to flash the unlocked firmware but will able to flashback to the t mobile firmware if I wish? that's the only thing stopping me from flashing the unlocked firmware. the video calling was a big deal for me so thank you for figuring this out. also are you 100% on the unlocked firmware or do you have the t mobile CP flashed with the unlocked firmware?
Megatron84 said:
Looking at that picture I don't even have a Self Provisioning option hmmm
Click to expand...
Click to collapse
I don't have that option either .

Does anyone know when the 5g update is rolling out ?

greetings , hope all is well and safe in these times . my chinese version pro has all the bands in my country yet 5g doesnt work , ive read around that theres an ota thats gonna be rolling out to activate 5g does anyone know when ?
Edit : Am from Dubai - UAE , also VoLTE doesnt work which bums me out cause not having 5g is totally fine its just nice to know u have it but VoLTE !!!
thanks
What country are you in? Letting others know might help them answer your question?
happiboi said:
What country are you in? Letting others know might help them answer your question?
Click to expand...
Click to collapse
Dubai - UAE
in France there is the same message on the 5g dual sim which will be activated in a future update
Envoyé de mon Oneplus 8 pro
Zayatoshi said:
in France there is the same message on the 5g dual sim which will be activated in a future update
Envoyé de mon Oneplus 8 pro
Click to expand...
Click to collapse
like am ok with not having 5g honestly its just nice to know it works but even VoLTE doesnt work on this phone yet 2 years old phones have it .
kazlow said:
like am ok with not having 5g honestly its just nice to know it works but even VoLTE doesnt work on this phone yet 2 years old phones have it .
Click to expand...
Click to collapse
wifi and lte calls work perfectly after activation and the procedure mentioned on xda for oneplus
Envoyé de mon Oneplus 8 pro
Zayatoshi said:
wifi and lte calls work perfectly after activation and the procedure mentioned on xda for oneplus
Envoyé de mon Oneplus 8 pro
Click to expand...
Click to collapse
what procedure if u dont mind sharing , excuse my amateur hours
Zayatoshi said:
wifi and lte calls work perfectly after activation and the procedure mentioned on xda for oneplus
Envoyé de mon Oneplus 8 pro
Click to expand...
Click to collapse
what procedure if u dont mind sharing , excuse my amateur hour
kazlow said:
what procedure if u dont mind sharing , excuse my amateur hour
Click to expand...
Click to collapse
This is what I remember from OnePlus 7 Pro:
Dial *#800#
Tap on "Log Kit"
Tap on "Function Switch"
Enable "VoLTE" Switch
Enable "VoWifi" Switch
Hope that helps!
Edit
Let me share my experience with this too.
I've installed the old OEMLogkit app, because the new app included with the 8 Pro doesn't work.
I've enabled the VoLTE and VoWifi through that, and restarted. The switches were available under both SIM cards' settings, and enabled them, then restarted once again.
Out of curiosity, I followed the tutorial mentioned above, and when I was checking which setting is enabled in the PDC application, I found, that both SIM cards have their own and correct selection enabled.
Sub0 has UK_VoLTE_Vodefone, and Sub1 has Telefonica_UK_Commercial enabled without changing any settings.
I'm not sure what happens but I seem to have 5G with dual SIM,
I'm in France right now so cannot show the 5G indicator in a screenshot if you're wondering, but I have 5G with with Vodafone card in the UK. Will try back when I'm back in the UK later this week
samteeee said:
This is what I remember from OnePlus 7 Pro:
Dial *#800#
Tap on "Log Kit"
Tap on "Function Switch"
Enable "VoLTE" Switch
Enable "VoWifi" Switch
Hope that helps!
Click to expand...
Click to collapse
i cant find that in the oneplus 8 pro
daviddosa said:
Let me share my experience with this too.
I've installed the old OEMLogkit app, because the new app included with the 8 Pro doesn't work.
I've enabled the VoLTE and VoWifi through that, and restarted. The switches were available under both SIM cards' settings, and enabled them, then restarted once again.
Out of curiosity, I followed the tutorial mentioned above, and when I was checking which setting is enabled in the PDC application, I found, that both SIM cards have their own and correct selection enabled.
Sub0 has UK_VoLTE_Vodefone, and Sub1 has Telefonica_UK_Commercial enabled without changing any settings.
Click to expand...
Click to collapse
honestly am too scared to mess with the settings , and i tried to translate that page and find a better tutorial but couldnt . am not particularly good with finding the proper settings when it comes to networking stuff .
It's extremely easy to do, just follow the instructions.
This is the original thread here on XDA.
Download the zip from the post above (around 90MB), then install the 2 apks included in the zip, onto your phone.
Open the dialer, then type *#800#
Select EngineerMode
Select OnePlus logkit
Scroll down, click function switch
Turn on VoLTE, click cancel for reboot
Then turn on VoWifi, then click reboot
After reboot, you should have the option available in the settings.
If this works, then you don't need to fiddle with the other programs. It worked for me, because those options were enabled in the PDC program when I checked it, and I didn't have to enable it.
If it doesn't work, then you need to try the program to enable these.
daviddosa said:
It's extremely easy to do, just follow the instructions.
This is the original thread here on XDA.
Download the zip from the post above (around 90MB), then install the 2 apks included in the zip, onto your phone.
Open the dialer, then type *#800#
Select EngineerMode
Select OnePlus logkit
Scroll down, click function switch
Turn on VoLTE, click cancel for reboot
Then turn on VoWifi, then click reboot
After reboot, you should have the option available in the settings.
If this works, then you don't need to fiddle with the other programs. It worked for me, because those options were enabled in the PDC program when I checked it, and I didn't have to enable it.
If it doesn't work, then you need to try the program to enable these.
Click to expand...
Click to collapse
Thanks for this I did it and it showed in the sim menu and all but it doesn't work
daviddosa said:
It's extremely easy to do, just follow the instructions.
This is the original thread here on XDA.
Download the zip from the post above (around 90MB), then install the 2 apks included in the zip, onto your phone.
Open the dialer, then type *#800#
Select EngineerMode
Select OnePlus logkit
Scroll down, click function switch
Turn on VoLTE, click cancel for reboot
Then turn on VoWifi, then click reboot
After reboot, you should have the option available in the settings.
If this works, then you don't need to fiddle with the other programs. It worked for me, because those options were enabled in the PDC program when I checked it, and I didn't have to enable it.
If it doesn't work, then you need to try the program to enable these.
Click to expand...
Click to collapse
Ok I got voLte to work finally by choosing India, now my question is. The phone bands of 5g are supported by my provider, do I need to look for specific provider in PDC to make it work or is that something wel get in an Ota update?

Firmware vC33 (International only) is out!

Here, as usual for the "vendor" package.
For the full ROM upgrade you have to go to the proper support website.
Not for EU variant?
Thank you very much for the info an download - any news on the changelog?
here is some info:
https://www.rprna.com/updates/realme-ui/realme-x2-and-x2-pro-october-2020-security-patch/
Did you guys try it? I saw a few screenshots somewhere that there are some new AOD styles, is that true? As the ones that are available now are very bland (made them like they don't care) that would be a huge deal for me.
adsubzero said:
Did you guys try it? I saw a few screenshots somewhere that there are some new AOD styles, is that true? As the ones that are available now are very bland (made them like they don't care) that would be a huge deal for me.
Click to expand...
Click to collapse
I'm on LineageOS 18, so I had to google "AOD styles" Sorry, can't tell ...
adsubzero said:
Did you guys try it? I saw a few screenshots somewhere that there are some new AOD styles, is that true? As the ones that are available now are very bland (made them like they don't care) that would be a huge deal for me.
Click to expand...
Click to collapse
I think they will come with realmeUI 2.0
adsubzero said:
Did you guys try it?
Click to expand...
Click to collapse
Nope, i have a CN device!
adsubzero said:
Did you guys try it? I saw a few screenshots somewhere that there are some new AOD styles, is that true? As the ones that are available now are very bland (made them like they don't care) that would be a huge deal for me.
Click to expand...
Click to collapse
Hey ! I downloaded update from Indian site and my phone is global (europe). As far as I see there's much more clock styles for AOD. Screenshots in attachment.
MrMD69 said:
Hey ! I downloaded update from Indian site and my phone is global (europe). As far as I see there's much more clock styles for AOD. Screenshots in attachment.
Click to expand...
Click to collapse
As I see those are the same as they are present now. Is the new update Realme UI 2.0, or is that reserved for Android 11?
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
Oceansoul91 said:
I think they will come with realmeUI 2.0
Click to expand...
Click to collapse
Hmm then maybe it was a bait (not actually X2 Pro), I can't find it anymore ?
adsubzero said:
As I see those are the same as they are present now. Is the new update Realme UI 2.0, or is that reserved for Android 11?
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
Hmm then maybe it was a bait (not actually X2 Pro), I can't find it anymore
Click to expand...
Click to collapse
The linked stuff os just the firmware, the so called "vendor blob".
For the full ROM update you have to reach out Realme's support site, something like this and select "realme X2 pro".
Uqbar said:
The linked stuff os just the firmware, the so called "vendor blob".
For the full ROM update you have to reach out Realme's support site, something like this and select "realme X2 pro".
Click to expand...
Click to collapse
Yeah I'm just waiting for the release on EU website as I've always done, just feel more confident that way. I'm just curious, I can't find the website again which showed the new AOD style, so you guys don't see new stuff?
is global version de eu version?
how do i know which i have.
I also receive the OTA but I can't find it on the realme support page, it still show the .32
Little question, I'm currently rooted. Can I installe the OTA via the Realme updater without issue ? (except the loss of root, but I don't care)
I've noticed an issue with the dialer. When calling someone there is no dialer tone so I don't know if it's actually ringing until the other person answers. Did anyone else notice this issue after updating to c.33?
adsubzero said:
I've noticed an issue with the dialer. When calling someone there is no dialer tone so I don't know if it's actually ringing until the other person answers. Did anyone else notice this issue after updating to c.33?
Click to expand...
Click to collapse
Hello.
I've made the C33 update too but I don't have the behavior you're describing.
I tried calling multiple phone numbers I have at the office (mobile and fix) and each time I was hearing the usual tone before people pick up the line.
By my side, I have noticed another strange issue, but I don't know if it's due to the C33 update or if it's is due to something coming from my unit only.
After finishing the update process, the phone restarts normally but at the beginning I have a pop-up message asking me if I want to activate location services.
Each time I reboot my device, this pop-up message does show and I have to accept it even if the location services hasn't been switched OFF before reboot.
This pop-up message doesn't show if I make a restart instead of a reboot.
However, the more annoying thing is that the GNSS services aren't working as before whatever a restart or reboot is done.
If I use a GPS test application, I usually can see the number of sats and all the relevant details they give (NMEA messaged, etc...).
But since C33 update, I can see these information only for a minute or a few more, then they stop being refreshed and no other information are available than the position and speed.
It doesn't affect navigation, but I have some personal tracking project and these information were essential for my needs.
Can someone make a test with its X2 Pro and tell me if this issue does only concern my phone and not the C33 update?
djelloul said:
Can someone make a test with its X2 Pro and tell me if this issue does only concern my phone and not the C33 update?
Click to expand...
Click to collapse
I have exactly the same symptoms. GPS tool works after reboot for three minutes. Then all satellites are gone. See second screenshot. Navigation keeps working and is accurate. I do not have a "enable location pop-up" after each reboot.
I have X2pro 12/256 global with C33.
h321b said:
I have exactly the same symptoms. GPS tool works after reboot for three minutes. Then all satellites are gone. See second screenshot. Navigation keeps working and is accurate. I do not have a "enable location pop-up" after each reboot.
I have X2pro 12/256 global with C33.
Click to expand...
Click to collapse
I do not get this message when rebooting, but I do have the same with the GPS test app (tried 2). It does give my right location also when moving around so the GPS does work correctly.
Thank you people for the quick feedback.
I don't know if it is possible to apply C32 *.ozip package after a C33 update to recheck if the behavior was also present in previous firmware release.
I tried looking for some answers about firmware version reverts, but I can only find downgrade process to go back to Android 9, and it isn't what I want to do.
I know this type of NMEA informations isn't relevant for everybody, but in my case this issue has a huge impact on a bench metrology system I'm using and using my phone as a GNSS Location tracker is a very handy solution.
It was properly working in July then I had to debug other matters before using back this function again in November.
If I was aware this update will affect my phone, I will probably not apply it...
I didn't notice any issues while using Google Maps, nor did I see any warning messages, but I've noticed the same thing using the gps test app.

Oneplus I pro, enabling call recording possibile in Europe?

Hi, I am coming from Xiaomi phones, and I live in EU Europe.
Wish to buy a Oneplus 8 Pro, but only only only if I have call recording working. Which means that when I want during a call I press a button and the call gets recorded.
I find this feature extremely useful for many reasons, but because of some privacy law (what the f***it's MY call) is not available on phones in Europe.
In Xiaomi phones with European ROM is disabled, but I am able to have it flashing other country ROM (like India or other).
Is this possible also with the Oneplus 8 Pro?
Thanks
I'm in the UK, soon to not be Europe and it's working fine for me pal.
Could it be your provider? Didn't think they'd have an influence over that.
Is your phone branded or something?
claudioita said:
Hi, I am coming from Xiaomi phones, and I live in EU Europe.
Wish to buy a Oneplus 8 Pro, but only only only if I have call recording working. Which means that when I want during a call I press a button and the call gets recorded.
I find this feature extremely useful for many reasons, but because of some privacy law (what the f***it's MY call) is not available on phones in Europe.
In Xiaomi phones with European ROM is disabled, but I am able to have it flashing other country ROM (like India or other).
Is this possible also with the Oneplus 8 Pro?
Thanks
Click to expand...
Click to collapse
You will want a pc to run adb commands, but download joneplustools, grant it access via adb then turn on call recording in there. It enables the native call recorder
manor7777 said:
You will want a pc to run adb commands, but download joneplustools, grant it access via adb then turn on call recording in there. It enables the native call recorder
Click to expand...
Click to collapse
Do you know why it's disabled for him?
I have the same model? Unlocked 2023.
Maybe the country matters?
dladz said:
Do you know why it's disabled for him?
I have the same model? Unlocked 2023.
Maybe the country matters?
Click to expand...
Click to collapse
No, i don't!
I have an unlocked 2023 on Three in the UK. Generic EU, unbranded firmware too and it was disabled for me
manor7777 said:
No, i don't!
I have an unlocked 2023 on Three in the UK. Generic EU, unbranded firmware too and it was disabled for me
Click to expand...
Click to collapse
Aye im on 3 too same here??
In Europe is disabled because is against some stupid law
manor7777 said:
You will want a pc to run adb commands, but download joneplustools, grant it access via adb then turn on call recording in there. It enables the native call recorder
Click to expand...
Click to collapse
That's it? Good.
Is this permanent or need to be redone after reboot?
How is the native call recorder? During a call you press a button, it records both parties and saves it on the phone?
claudioita said:
That's it? Good.
Is this permanent or need to be redone after reboot?
Click to expand...
Click to collapse
Joneplustools will restore after a reboot. Been pretty reliable for me and I'm not rooted. It has a service that you can enable too but I've never needed to use it, just the enable option. Then I enabled it in phone app settings.
manor7777 said:
Joneplustools will restore after a reboot. Been pretty reliable for me and I'm not rooted. It has a service that you can enable too but I've never needed to use it, just the enable option. Then I enabled it in phone app settings.
Click to expand...
Click to collapse
Hi, ok I can live with that, if the phone is good rearely is neededd to reboot.
Do you recommend the phone: I can get the 8/128Gb at 700 Euro and 12/256Gb at 775 Euro.
Is the 12Gb really needed?
Still a good buy, or is there any better?
p.s. I had since 3 years only Xiaomi high end phones, but my last Poco F2 Pro lasted 2 months and it broke, bad experience
Magisk module "Enable Native Call Recording v9.2" works fine on OxygenOS 11, as reported in the thread.
dianoandr said:
Magisk module "Enable Native Call Recording v9.2" works fine on OxygenOS 11, as reported in the thread.
Click to expand...
Click to collapse
Cool are there many PRO's to use Oxygen compared to use the stock ROM?
claudioita said:
Cool are there many PRO's to use Oxygen compared to use the stock ROM?
Click to expand...
Click to collapse
OxygenOS is the stock firmware with which the phone leaves the factory, then it is branded according to the country that will sell the product.
The only real difference is with the phones sold in China that come with HydrogenOS, version without google applications.
dianoandr said:
OxygenOS is the stock firmware with which the phone leaves the factory, then it is branded according to the country that will sell the product.
The only real difference is with the phones sold in China that come with HydrogenOS, version without google applications.
Click to expand...
Click to collapse
Ok, sorry new to Oneplus. Using Magisk is needed to root, or lose some functionality? Like NFC Google Pay, Netflix and so on?
claudioita said:
Ok, sorry new to Oneplus. Using Magisk is needed to root, or lose some functionality? Like NFC Google Pay, Netflix and so on?
Click to expand...
Click to collapse
No you won't lose anything with the likes of just root or magisk ROMs.
Safety net passes.
If you affect system then you will lose safety net and thus the benefits of having it.

Categories

Resources