Database Users

Help with my Android 10.2 Golf 7 4.2.2 car system

Hi
i am from holland and hope someone can help my with my new car system i bought a Android 10.2 Car system from cars-load .com
it is working good but some small problems
1: When car put in reverse the screen don't show me my original Rear camera (Build in Vw Logo) when i put camera in Aux conncetor and pres aux on system then camera is working so camera is good!
2: When i make a call the other people don't hear me well! i use the front build in microphone but i bought a extern microphone and connect it but how disable i the front microphone?
sorry for my english but i hope some one can help me please??
and is it possible to do firmware update?? or some mods on my system?

If you want help your ll need to identify exactly what unit you have, post a link or something.

typos1 said:
If you want help your ll need to identify exactly what unit you have, post a link or something.
Click to expand...
Click to collapse
yes you are right can you tell me how i upload a picture?

typos1 said:
If you want help your ll need to identify exactly what unit you have, post a link or something.
Click to expand...
Click to collapse
Like this? https://www.youtube.com/watch?v=YK2-XIkn5G4
and this is photo of it
https://www.google.nl/search?q=andr...9uo-Q4BlM:&usg=__iI2qz38t7-l7KzRSkwdnZmzVa8U=
is this ok for you? sorry i am new here but really want to fix it ;=)

head unit audio with an amp, restricted volume? And how to get viper4...

Hi guys,
I've got a monoblock amp for my sub and a 4 channel amp for my front components and rear coax's, however i'm yet to put them in and the car is running factory, other than my seicane px3 7.1.2 head unit (seat ibiza). I've noticed that the volume isn't exactly loud, even at 30 (max) it doesn't really distort the speakers, whereas i'd expect it to, just like the factory radio did. I'm concerned there is some kind of limit to the sound, or the processing is poor perhaps, and wondering will this transfer to my amps giving me low volume sound? Another thing i've noticed is aux input via the AUX rca input, is even quiter still when compared to USB / bluetooth audio, any reason?
The single rca sub pre - out, do these work, along with the equalizer sub setting?
After doing some reading i'm wondering if the likes of viper4android or Arise apps would be a solution to remove and limits to sound, although i've found no info on rooting or if there is a custom rom for this unit, px3, rk30sdk. Is it easy to back up the standard settings/firmware in case of anything going wrong, or not so easy? The MCU version is 'MTCD_MX_V2.59_1'
thanks

Same problem here, also with the Seicane px3 unit with 7.1.2.

pgee said:
Same problem here, also with the Seicane px3 unit with 7.1.2.
Click to expand...
Click to collapse
damn it thats annoying.. so it's probably a common fault. My big concern is that its not hardware, but software so it'll just make the amp i hook up to it quiet also..
anyone able to shed light? is viper4audio a solution?

I also think it is software. Searched for volume mods but can't find them.

pgee said:
I also think it is software. Searched for volume mods but can't find them.
Click to expand...
Click to collapse
do you also have issues with bluetooth audio quality via a2dp app? and have you found a way to root it or get a custom rom on?

joshh1512 said:
do you also have issues with bluetooth audio quality via a2dp app? and have you found a way to root it or get a custom rom on?
Click to expand...
Click to collapse
A2dp/Bluetooth works fine but I don't use it. No root yet and I didn't try a custom Rom.
I can still use the original radio and Bluetooth together with the Android system. Works great.

Hello,
I have a PX3 with android 7.1.2 with an abnormally low volume, however, when using the DVD this volume increases a lot, it seems that the volume of android was limited by software.
I'm trying to increase this volume, but without success right now.
Greetings.

Read today in another post to set the original radio from normal to 'boost'. It significantly raised the volume from the headunit.

pgee said:
Read today in another post to set the original radio from normal to 'boost'. It significantly raised the volume from the headunit.
Click to expand...
Click to collapse
That sounds good. Can you tell us where the post / mod is? I can't find it ...
Thank you!

It's no mod. Read it in a forum about Mercedes radio's (Audio20). The headunit is on the AUX from the original radio so the 'boost' setting on the original radio increases the volume for AUX.

I am unable to find the post you are talking about. The procedure is to enter the factory options (126) and raise the AUX volume in the "voice" menu?
Thanks.

JRYPZ said:
I am unable to find the post you are talking about. The procedure is to enter the factory options (126) and raise the AUX volume in the "voice" menu?
Thanks.
Click to expand...
Click to collapse
No, it's not in the Android headunit! In my car the original radio/system from Mercedes is still there. So, I have two systems connected. The Android headunit is for the sound connected with the AUX from the original radio. In there I can set the volume of AUX to 'boost'.
It's this system: https://www.seicane.com/android-hd-...hd-1080p-video-steering-wheel-control-s018848

Eonon GA8198 - Noobie Questions

Hi guys - I recently installed one of these into a Mazda 6. (px3/7.1.2/Arm Cortex Quad) My first toe dip into the Android Headunit space.
Couple of outstanding questions:
[1) I previously had a Sony Bluetooth module plugged into the aux in port. The A2DP on this unit sounds terrible by comparison. (CD Player sounds great) The Sony seems to support a HD codec. Are the codecs in the hardware/firmware for the BT module in these units? Specifically:
a) Is it possible to install more advanced codecs such as AptX HD via a software update/install?
b) Is it possible to connect a better quality BT USB dongle and use that with the on-board BT disabled?
2) I would really like to be able to use Android Auto. I have installed Head Unit Reloaded, and I can get this going with Wifi Direct, but if I plug my Pixel 2 XL into the USB ports, all it will do is charge. I have checked with Emil, and he seems to think this is not the expected behaviour. Eonon support say that is all that is supported. Dashcam etc works OK.
a) I assume ports on these types of head units are USB OTG? (Is that how it works?)
b) Maybe ScreenCast or something is taking the defaults for phone connect. I've been through every app on there I can find. Any other hints?
c) Has anyone had Headunit Reloaded working on an Aonon unit with the USB cable?
d) Is one of these Car Play/Android Auto USB dongles likely to work if I buy one?
3) What are people doing with multiple drivers of the same car? Setting multiple Android/Google profiles and switching between them somehow? Or making an generic Google account for your car?
4) I'm noticing some dashboard lights flashing briefly on the dash (Traction Control) etc when the ignition is on. Need to pull it apart and disconnect the stereo to see if it is causing this. Has anyone else experienced it? (Eonon sent me a firmware update to fix this, but it is just the same)
Any help appreciated! Or to just know if anyone else is using one of these.

Update for #2. I flashed the latest firmware Eonon gave me, and (that caused a few Wifi problems) but now if I disable the EzConnect software they supply Headunit Reloaded works

Zilch said:
Update for #2. I flashed the latest firmware Eonon gave me, and (that caused a few Wifi problems) but now if I disable the EzConnect software they supply Headunit Reloaded works
Click to expand...
Click to collapse
Hello,
I've the same unit. Would you send the new firmware to [email protected]!
Thanks!

This is the link Eonon gave me. Let me know if it doesn't work for you:
https://drive.google.com/file/d/1v7idZTUybrRmofNw2Fmzd1WBv2dv-Qw_/view?usp=sharing

Zilch said:
This is the link Eonon gave me. Let me know if it doesn't work for you:
Click to expand...
Click to collapse
Thanks, downloaded. Will try to install.
Did you recognized new features?

zh71 said:
Thanks, downloaded. Will try to install.
Did you recognized new features?
Click to expand...
Click to collapse
I think it's just bug-fixes. Did you try it? How is your head unit going? Mine has some issues. Are you using Headunit Reloaded?

Zilch said:
I think it's just bug-fixes. Did you try it? How is your head unit going? Mine has some issues. Are you using Headunit Reloaded?
Click to expand...
Click to collapse
I havn't installed, yet.
Tried Hal9k, the newest one.
That works. And rooted.

zh71 said:
I havn't installed, yet.
Tried Hal9k, the newest one.
That works. And rooted.
Click to expand...
Click to collapse
Thanks. I might try that if you recommend it? Do you know if going back to stock is as simple as installing that image I linked?
Can you tell me if you have any issues with yours?
1) I have electrical engine whine noises over the speakers.
2) Some crackle.
2) The top LED display beeps twice every few minutes and flashes "NAVI" up.
3) Running Headunit Reloaded works now, but it randomly disconnects every few minutes or so and I have to unplug/replug. I've read this could be a cable issue that is specific to the Pixel 2 XL.
It's possible I have a cable short or similar behind the unit, but wanted to check with someone else before pulling the dash all apart. Cheers.

Zilch said:
1, 2, ...
Click to expand...
Click to collapse
Are these ones with factory ROM, or with Hal9k?

zh71 said:
Are these ones with factory ROM, or with Hal9k?
Click to expand...
Click to collapse
Factory with the update. Sounds more like a grounding/quality issue though rather than software.

Ts9 sp9853i_1h10_vmm

Hi guys How are you today! I will love to know whats post or support they have for this head unit android 8.1.0 no bottons 10” screen sp9853i_1h10_vmm 4gb ram
system version v11.1.1_20190615.180645_TW8-X
MCU version ts9.4.3-97-225-A46181-191118
Processor type octa-sp9853i
Im try ro find some support for like able to root or update to android 9.0 any suggestions

Have the same unit as yours. Not sure this post related or not
h tt ps ://forum.xda-developers.com/android-auto/android-head-units/firmware-fur-ullgo-head-unit-sp9853i-t4066893

tsxmichael said:
Hi guys How are you today! I will love to know whats post or support they have for this head unit android 8.1.0 no bottons 10” screen sp9853i_1h10_vmm 4gb ram
system version v11.1.1_20190615.180645_TW8-X
MCU version ts9.4.3-97-225-A46181-191118
Processor type octa-sp9853i
Im try ro find some support for like able to root or update to android 9.0 any suggestions
Click to expand...
Click to collapse
Hello
It is DSP version?
Can you check the loudness control and green rca sub out plug, the sub gain works or not?

vegfokic said:
Hello
It is DSP version?
Can you check the loudness control and green rca sub out plug, the sub gain works or not?
Click to expand...
Click to collapse
I also have problems with loudness and sub (sub gain not working). Seller "forgot" to send me extra "sub RCA" harness for that. I hope it works. I guess the software is ok.

hey guys, if anyones head unit came with the Carda Fiber DSP Tuning app, I would really appreciate it of you could share the app with me, I deleted it and now the volume doesnt work. Ot is pretty easy to share an app, just let me know if you guys have it. thank you

hi all!! I bought this ts9 unit
https://www.aliexpress.com/item/32G...966.html?spm=a2g0s.9042311.0.0.d68f4c4dB4UNTD (ts4g version)
Can we root it and tune????

I just brought ts9-sp9853i , its really fats but Im having problem connecting to android auto and even simple mirror link won't work or something I'm doing wrong. I tried headunit reloaded but it only shows blank screen. Anyone can tell how to connect your phone for android auto please let me know. My phone is Note 8 by the way.
Sent from my SM-N950W using Tapatalk

Hi. I just bought the same headunit and have issues with it. Initially when plugged in there was sound when i played the radio/bt music/ music however i was trying to get the steering wheel control working and changed the MCU (through extra setting--> model choose). From this moment on, the sound stops working. Is there a way to reset the MCU or any other method to get sound playing again? i have tried factory reset, reset, turning on and off etc etc. I drive a 2013 Honda Civic Hatchback. Any ideas would be greatly appreciated.
Thank you in advance~

mike933333 said:
hey guys, if anyones head unit came with the Carda Fiber DSP Tuning app, I would really appreciate it of you could share the app with me, I deleted it and now the volume doesnt work. Ot is pretty easy to share an app, just let me know if you guys have it. thank you
Click to expand...
Click to collapse
Hi, you have it already? I've deleted it also (factory reset). Can you share me this app?

Hi,
I have also same model octa sp9853 installed in my Toyota Corolla 2010 hybrid. Yesterday i was playing music through bluetooth and i tried changing volumes from my steering controls. The music stopped playing and can't hear any sound. In my phone music is still playing over Bluetooth but no sound in cars speaker and my phone. Please help me fix it. Thank You.

Hello. I am having isues with rooting device or removing some apps. No of the solutions are working for me. Pc is not detecting, system update from this site is not working. Any more solutions?
Thanks

@Csurgi
Hello! Did you get the app ?? I also deleted the "Carda Fiber DSP tuning" application. (factory reset) If so, please let me know.
[QUOTE = "Csurgi, post: 83784183, tag: 11166871"]
Szia, már megvan? Én is töröltem (gyári visszaállítás). Megoszthatja ezt az alkalmazást?
[/IDÉZET]
Helló ! Megkapta az alkalmazást ?? A "Carda Fiber DSP tuning" alkalmazást én is töröltem. (gyári beállítások visszaállítása) Ha igen, kérjük, ossza meg velem.

Hello. would have a little problem with the solution. you have no idea how to fix it?
Szia. lenne egy kis problémája a megoldással. fogalmad sincs, hogyan lehetne kijavítani?

.

Hi everybody! There is any way to access recovery mode for this unit?
Tried the method with terminal but it stuck with the Android logo and " no command" text. Didnt had time to try other physically methods.

Bot3k said:
Hello. would have a little problem with the solution. you have no idea how to fix it?
Szia. lenne egy kis problémája a megoldással. fogalmad sincs, hogyan lehetne kijavítani?
Click to expand...
Click to collapse
You resolve issue?

Do you have that part of sp9853i for me

Does anyone know how to reboot (not switch off display and on) the head unit?

witam wszystkich potrzebuję oprogramowania do sp9853i_1h10_vmm android 9.0 bardzo proszę

Hello everyone!
Could anyone find the Carda DSP app? I also deleted it with factory reset. I would be grateful if someone could share it with me or point me in the right direction. If someone has it installed, an installer apk can be created very easily.
The only problem is that the volume is too low. (most likely because the Carda app is missing). I can also imagine that some other app would get the job done, but I could not find any.
Thanks in advance!
Best Regards
Rafi

Menu on HMI is not there

Hello folks.
I hope someone can help me.
I installed the Junsun v1 pro in my BMW E91.
where can I find the menu for Car Infotainment or the gear wheel for Device HMI?
it is nowhere to be found. I'll go crazy.
thank you for your help

SeiteBallon74 said:
Hello folks.
I hope someone can help me.
I installed the Junsun v1 pro in my BMW E91.
where can I find the menu for Car Infotainment or the gear wheel for Device HMI?
it is nowhere to be found. I'll go crazy.
thank you for your help
Click to expand...
Click to collapse
As this is quite car dependent, you should get in contact with the seller.

rigattoni said:
As this is quite car dependent, you should get in contact with the seller.
Click to expand...
Click to collapse
Thanks for the answer.
but why should it be car dependent? isn't it software dependent?
All of them come with a menu where you can set the FM radio (because it is noisy) or the settings for the rear view camera, constant slight flickering and only NTSC/PAL resolution, although HD resolution should be.

SeiteBallon74 said:
Thanks for the answer.
but why should it be car dependent? isn't it software dependent?
All of them come with a menu where you can set the FM radio (because it is noisy) or the settings for the rear view camera, constant slight flickering and only NTSC/PAL resolution, although HD resolution should be.
Click to expand...
Click to collapse
No, this menu is car dependant.
May be wrong settings in the CAN menu, but the seller should tell you the right settings.

rigattoni said:
No, this menu is car dependant.
May be wrong settings in the CAN menu, but the seller should tell you the right settings.
Click to expand...
Click to collapse
in order. I can't imagine that it depends on the car and shouldn't be there with my car, but okay.
do you think it could be a canbus problem?
my canbus in the car is working properly.
there is no support from the seller.
I will never buy anything from Junsun again

SeiteBallon74 said:
in order. I can't imagine that it depends on the car and shouldn't be there with my car, but okay.
do you think it could be a canbus problem?
my canbus in the car is working properly.
there is no support from the seller.
I will never buy anything from Junsun again
Click to expand...
Click to collapse
Your unit has an own Can-Adaptor to translate the signals in the CAN to the ones the head unit needs.
If in the settings of the unit has been chosen the wrong car, you may run into such things.
Even if the right car has been set, try the others around the correct one.
If you don´t get support, send it back. Just that easy.

rigattoni said:
Your unit has an own Can-Adaptor to translate the signals in the CAN to the ones the head unit needs.
If in the settings of the unit has been chosen the wrong car, you may run into such things.
Even if the right car has been set, try the others around the correct one.
If you don´t get support, send it back. Just that easy.
Click to expand...
Click to collapse
OK I understand that.
I would have liked to have sent it back, but unfortunately a pin on the radio broke off so that I can no longer return it.
It was bought from AliExpress
any idea what i could do now?