hi everybody..
Can anyone help..I tried to upgrade my jamin to wm6 prophet..everything went ok and iwas told that the upgrade was successful,
but when I restarted it ..the coloured screen keeps showing, I tried to hard reset ..but still the same problem.
I'll be grateful if you could help me..for I'm in a place where your help is needed necessarly
look here -> http://forum.xda-developers.com/show...23#post1027323
look here -> http://forum.xda-developers.com/show...23#post1027323
thnx Neo..HTTP 404 NOT FOUND
That`s not from me, that`s the tread:
Problem solved ! Please, stick this post up - I saw A LOT of people in this forum to ask how to resolve situation with "STUCK ON START-UP SCREEN" ... no one full answer. So ... solution :
1 step. Download one working for YOUR G3 or G4 version ROM. You can easly recognize the difference
G4 ROM on startup screen looks like
IPL 2.10.0001
SPL 2.13.0001
Look at last digit - if it's like 0001 - its G4 ROM. If it ends like 2.00.000, or just 2.00 - then its G3 hardware version.
So G4 (2.XX.0001) users can use any G4 ROM like this one ( tested by me ) -> ftp://xda:[email protected]_ship.zip
G3 (2.XX) users can use this ROM -> ftp://xda:[email protected]_v2307.exe This ROM is not tested by me, but I have read a lot of good responses about it.
2 step. First prepare the phone - full charge battery. After that, hold CAM + COMM buttons ( on the left side of the phone ) and reset it. You will be bringed to so sadly famous "three colors screen". Now connect your phone through USB and start Updating program that you have downloaded before. Sit back for about 15 minutes ( dont get nervous when it stucks on 80% ... it had to pass it after time). If everything goes smooth - after reset you must to have working phone again.
2A step. If you get error message ( like I did first time )
ERROR [294] : INVALID VENDER ID
You have to make few steps, a little more complicated then pressing NEXT buton couple of times.
First, download this cracked version of ROM Update Utility program. Can be found here -> ftp://[email protected]/Pro...NoVendorID.zip , then
1. Download and install WinRAR ( http://www.rarlabs.com/ )
2. Click with right button on program that updates ROM ( like RUU_Prophet_G3_2151327_AKU23_023021_P12MB_PDAMobiz _v2307.exe ) and choose Extract to...
3. Replace in directory you just extract archive file ROMUpdateUtility.exe with the same file from the archive you have downloaded early (ftp://[email protected]/Pro...NoVendorID.zip )
4. Now, run ROMUpdateUtility and this time there will be no WRONG VENDER ID error.
Good Luck
NEO thanks for your time..
my jamin is G4 ..when i open the ftp link you gave ..>Prophet>shipped complete updates....i cant find _ship updates... only radios,ext roms
so what should i use in this case...
thnxs again
You must flashed an orig. WM5 rom. Please search. I can`t do this things for you. So many treads are here, about your problem.
Hi guys,
First of all, maybe this is a hardware problem, not sure, becouse I afraid that i got broken HD2. When it came, it was powerer ON, and everything was working, but when I turned it off so I can insert my SIM Card, it dont boot any more. All I get is white screen.
What I tried allready.
1. I installed MAGLDR first time with no problem.
2. I used USB Flasher option to flash ClockWorkMod 150MB file from here http://forum.xda-developers.com/showthread.php?t=898913
3. I downloaded this rom file http://forum.xda-developers.com/showthread.php?t=769026 to my sd card, and installed it from recovery. There was no problem so far, installation was ok, but when phone rebooted, i got message Nand kernel error...
4. Then I read that i need to do task 29 first, and start all over again. I used HD2toolkit for that, downloaded it from forum, and did task 29 no problem. But affter that, a cant install MAGLDR no more. A always get error 270 - image was corupted!!!
And thats it. Now I only have white screec.
Volume down + power works, so I can enter tri colour.
I have HSPL 2.08 on phone. I tryed to reinstall it, and it works (I get message on my pc that says succsess, but on phone there is no "we hacked it", so not sure if this do anything).
Radio is 2.15.50.14.
I read 7-8 hours yasterday here, and coudn't find nothing more than this things i already tried. I found something about SPLXPLOIT but cant make it work on windows 7 (not sure should I even do this).
Help wanted.
Thank you in advanced.
in tri-color screen do you see 'usb' at bottom? you should flash mgldr in tri-color screen.do you do so?
Yes, it is first serial, but when I conect it to PC it is USB.
On the phone progres bar go from 0 to 100% instant, and then phone restart, but I just got white screen. On pc i got message from hd2Toolkit error 270 - image is corrupted.
Thanks
As always, in these cases, I suggest you reinstall the stock firmware using the SD-card trick.
Yes, it'll reset your SPL and everything else, but if it boots, then it means everything is working fine (so it's not a hardware problem), and you can start "rebuilding" your Android OS.
Also, make sure to copy Android ROM ZIP files by mounting the SD card directly to your PC, rather than use the USB option, which is known to cause corruption at times.
Any link for this?
No sure what i have and what i havent tried.
Thanks.
can you try downloading and installing toolkit.maybe some parts of it are corrupted.
I just tried sd card update to default rom, but got this message in attachemnt.
Any ideas?
vlastem said:
I just tried sd card update to default rom, but got this message in attachemnt.
Any ideas?
Click to expand...
Click to collapse
dont choose 'update from sdcard'.but ad recovery-install zip from sd-choose zip from sd- then choose your rom.zip. and reboot
Not going to work becouse I canot install even MANGLDR any more.
When I tried to do that, I Get message in attachemnt.
vlastem said:
Not going to work becouse I canot install even MANGLDR any more.
When I tried to do that, I Get message in attachemnt.
Click to expand...
Click to collapse
can you try the attached mgldr. connect phone to pc,in tri-color screen see 'usb'. unrar the attached file.right click on Rom update utility .exe. run as administrator.
Did try this right now.
In first screen it says readme.txt is missing, but I can click next.
In next screen i got this massage
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
I run it as administrator. Widows 7 bussines, 32-bit
vlastem said:
Did try this right now.
In first screen it says readme.txt is missing, but I can click next.
In next screen i got this massage
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
I run it as administrator. Widows 7 bussines, 32-bit
Click to expand...
Click to collapse
sorry i was wrong.you must right click on rom update utility exe when you are in tri color screen (i havent done this for a long time)
is that radio supported by MAGLDR?
Try using the 2,08 radio and see if that helps
Thank you all for help.
I tried everything that I found here, but nothing helped.
I took it to service two days ago, we will see what they will say.
Will keep you informed.
Thx
Same problem...
What did you get from them??
Share the info, plz.
Thanks in advance.
Will upload microscope pictures tonight.
Bad stuff this is.
No hope for mine, hardware, pipple put glue on motherboard, it worket for some time, but no more.
Try reflash radio with task29)
vlastem said:
Will upload microscope pictures tonight.
Bad stuff this is.
No hope for mine, hardware, pipple put glue on motherboard, it worket for some time, but no more.
Click to expand...
Click to collapse
Hi, same problem here radio bricked i think, bootloader works fine but nothing more, nothing can eb flashed, every time error 270... İm reserching 2 days but nothing has changed...
Hello guys ,,
i installed a ROM using USB flasher and didnt like it ,,
i tried to change the ROM using sd card but an error occurred (cache error)
I changed many things in the options and now i cant install any ROM and have no idea how to install the radio and magdlr again (those things...etc ),,,
ps. i tried returning to windows in order to use ActiveSync ,, but is seems like my phone doesnt have it !!
Can any body help me with steps of installation ?
big problem said:
Hello guys ,,
i installed a ROM using USB flasher and didnt like it ,,
i tried to change the ROM using sd card but an error occurred (cache error)
I changed many things in the options and now i cant install any ROM and have no idea how to install the radio and magdlr again (those things...etc ),,,
ps. i tried returning to windows in order to use ActiveSync ,, but is seems like my phone doesnt have it !!
Can any body help me with steps of installation ?
Click to expand...
Click to collapse
This will explain everything to you
It even has a video tutorial
http://forum.xda-developers.com/showthread.php?t=893948
The procedure is the same for every nand rom
The only thing that varies is the system partiton and thats easily changed with the hd2 toolkit
Main thing is to turn on your phone holding the volume down button.
From there you can flash task 29, Magldr, or a new radio
ThankQ casemandan ,,
I tried to flash task29 but there is an error ,,
the error : cannot open C:\task29.exe
cannot open C:\EnterBootLoader.exe
cannot open C:\ErrorBattery.fig
cannot open C:\ErrorUSB.fig
cannot open C:\modelID.fig
cannot open C:\rapitool.exe
and 3 more
I tried another 1 ,, but there is the same problem
what 2 do?
big problem said:
ThankQ casemandan ,,
I tried to flash task29 but there is an error ,,
the error : cannot open C:\task29.exe
cannot open C:\EnterBootLoader.exe
cannot open C:\ErrorBattery.fig
cannot open C:\ErrorUSB.fig
cannot open C:\modelID.fig
cannot open C:\rapitool.exe
and 3 more
I tried another 1 ,, but there is the same problem
what 2 do?
Click to expand...
Click to collapse
Make sure to run it as administrator first.
Don't hesitate to use HD2 NAND Toolkit.
Some times ago, I was unable to flash any rom, this tool save me.
hello guys
after spending hours and days trying to fix it i have no more ideas ...
Several Problems:
Just without any reasons one day i was not able to start the tablet ....
only the boot screen was shown and nothing more...
so i flashed it with a stock rom , doesn't remember the version after booting it shows the message : all pre-install processes complete ! enter your passwort :
.
i ve never entered a passwort so it makes no sence for me ....
after that i tried to install another stock rom: copied an update.zip to the xternal sd card , but when i start the recovery it only shows the green android guy with exclamation mark ..
so far so good no way to enter android because of the missing passwort, no access to recovery mode , to load the update.zip doesn t work , also hard reset doesn t work ...
maybe somebody can helb me how to use the update.zip with the external sd card correctly ... i think his must be the right way ..???
or is there any possibility to install custom recovery without entering android ?
hope somebody can help ..
thank guys
regards
Hello...
I was install this ROM on my G900H :
http://forum.xda-developers.com/galaxy-s5/development/rom-ry09iu-g900h-t2923883
I did all of wipes too ... (Wipe cache,Dalvik)
but when i restart my phone after the installation, I Had a problem ...
when I want to enter the first ROM settings , I got a Unfortunately error with com.phone app...!
and then my phone was reset to booting and this operation was repeated again and again and ..... !
Does anyone can help me?
(sorry for my english )