Hi all,
I think my Proximity sensor is broken..... can one try the following:
*#0588# (Proximity Sensor Test Mode)
And tell me what happens when the sensor is covered?
Also anyone got suggestions on how I can fix this?
Thanks
Tony
It works for me with *#0*# then select sensors and then move your hand close to the phone.
It also works with your code, the phone vibrates and the background changes colour when my hand is 5cm above the sensor.
LouisJB said:
It works for me with *#0*# then select sensors and then move your hand close to the phone.
Your code did not start anything running.
Click to expand...
Click to collapse
Can you please tell me what it says in Sensor?
In Proximity Sensor I have:
Proximity Sensor (Min/Avg/Max)
------------------------------------------
PROXIMITY: null ADC: 0 (0,0,1)
and sometimes when I cover the sensor it changes to : ADC: 2 (0, 1, 2)
Thanks
Looks like it is broken ACC 78(83,85,89) with my thumb over the sensor.
The important number is the first number (78). This must go over 10 to register as near at about 5cms , then the background turns green.
LouisJB said:
Looks like it is broken ACC 78(83,85,89) with my thumb over the sensor.
The important number is the first number (78). This must go over 10 to register as near at about 5cms , then the background turns green.
Click to expand...
Click to collapse
Thanks for that. Do you know if it's a firmware (I do have original Firmware on it but had CM7 on it for a while)
Looking like a faulty phone to me. These are hardware sensor tests.
a friend of mine has the same problem. We bought the telephone together but , after 1 month, his proximity sensor stopped working.
We tried the samsung diagnostic tool receiving the same information (ADC reach maximum 4).
we noticed that it stopped working after the change of the rom (with the installation of the clock recover) but I'm sure this is the real cause.
Is there a configuration file where proximity sensor parameter like gain/offset are stored?
Maybe some buggy application has changed these values.
if you have no warrenty, you can buy a replacement sensor, only about £10, it's front cam/sensors in one component
problem fixed!
Using phonetester it took 5 minutes to connect to the sensor (while with my phone it took 1 minute) but once connected , the proximity sensor started to work again also with samsung diagnostic and phone application.
donomark said:
problem fixed!
Using phonetester it took 5 minutes to connect to the sensor (while with my phone it took 1 minute) but once connected , the proximity sensor started to work again also with samsung diagnostic and phone application.
Click to expand...
Click to collapse
what did u use to repair ?, mines says proximity: null ADC range from 1 when nothing is in it;s way to 255 when coverd...
install only apps that you trust fully
Sent from my GT-I9100 using xda premium
Hello
I have an LG E610 which is marked as not for sale, I had the famous "user debug mode" show in the UI, but almost everithing was working well.
I tried to flash it using official kdz ROM, and this passed well, but after booting, I don't have the screen rotation, neither the GPS, I don't need GPS. But the screen rotation is important for me.
Using the Android System Information I got this list of sensors:
BMA250 3-axis Accelerometer
BMM050 3-axis Magnetic field sensor
BMM050 Orientation sensor
GP2A Proximity
Rotation Vector
Please help me find the drivers for this sensors (if this is the problem).
Thanks in advance
so did any one solve this problem have same s*&^%$
i am desperately seeking for a solution with the accelerometer sensor
i cannot use the phone without rotating if i have it on the table or even sometimes in my hand
sensor is off on the x axis = 6 ,
with the calibration tool i have managed to correct it to 5 but if i want to calibrate it to 0 and put it on a flat surface the calibration always fails
here you can see on the video near the end what i am talking about
i found the file responsible for the calibration posibbly acceleration and gyro sensor
just cannot understand the values inside there are so many numbers
location
sys/devices/14e300000.i2c/i2c-66/66-003a/input/input0/calibrator_cmd
any help is appreciated
Got my screen replaced at a local shop after it cracked.
But now the proximity sensor is not working properly as it always detects that it is covered.
Proximity testing apps show that the sensor always shows the value as 0.0 (covered).
can someone help me on how to disable the proximity sensor completely as i face black screen during calls and can't record/hang-up/put on speaker....
I'm rooted and running cosmic os 7.1.1 so xposed is not a solution
Need help disabling it.
:bump:
my zenfone lasers auto rotation is not working
things performed by me are flash full system , clean dalvik no luck
i have loaded sensors multitool in that i have check each sensor and all sensors graph values are 0.0 and rotation vector value is -1.0
is there any solution for this or my phones sensors are get physicaly damaged
tried quik tune up for calibration of sensor it works all sensor started to work some time after some the sensors stop working please help me for this issue please