my zenfone lasers auto rotation is not working
things performed by me are flash full system , clean dalvik no luck
i have loaded sensors multitool in that i have check each sensor and all sensors graph values are 0.0 and rotation vector value is -1.0
is there any solution for this or my phones sensors are get physicaly damaged
tried quik tune up for calibration of sensor it works all sensor started to work some time after some the sensors stop working please help me for this issue please
Related
I want to ask about gyroscope calibration.
I'm using stock rom ICS DXLP9 and speedmod kernel.
In Setting, display, there is gyroscope calibration. But in my note, its sensor not moving.
Trying to flash to stock kernel, its the same. Its sensor is not moving.
Is this gyroscope calibration, normally its sensor move or not ?
When trying using secret code *#0*#, in sensor test, for gyroscope, its can detect movement.
Is there anything wrong with my note ?
Which apps are you using that require the gyro?
Hello
I have an LG E610 which is marked as not for sale, I had the famous "user debug mode" show in the UI, but almost everithing was working well.
I tried to flash it using official kdz ROM, and this passed well, but after booting, I don't have the screen rotation, neither the GPS, I don't need GPS. But the screen rotation is important for me.
Using the Android System Information I got this list of sensors:
BMA250 3-axis Accelerometer
BMM050 3-axis Magnetic field sensor
BMM050 Orientation sensor
GP2A Proximity
Rotation Vector
Please help me find the drivers for this sensors (if this is the problem).
Thanks in advance
so did any one solve this problem have same s*&^%$
i am desperately seeking for a solution with the accelerometer sensor
i cannot use the phone without rotating if i have it on the table or even sometimes in my hand
sensor is off on the x axis = 6 ,
with the calibration tool i have managed to correct it to 5 but if i want to calibrate it to 0 and put it on a flat surface the calibration always fails
here you can see on the video near the end what i am talking about
i found the file responsible for the calibration posibbly acceleration and gyro sensor
just cannot understand the values inside there are so many numbers
location
sys/devices/14e300000.i2c/i2c-66/66-003a/input/input0/calibrator_cmd
any help is appreciated
Got my screen replaced at a local shop after it cracked.
But now the proximity sensor is not working properly as it always detects that it is covered.
Proximity testing apps show that the sensor always shows the value as 0.0 (covered).
can someone help me on how to disable the proximity sensor completely as i face black screen during calls and can't record/hang-up/put on speaker....
I'm rooted and running cosmic os 7.1.1 so xposed is not a solution
Need help disabling it.
:bump:
Hi, guys!
I have a Redmi Note 7, and my accelerator sensor not working correctly. I can't calibrate.
I tried :good: :
- Flash persist.img in recovery mode using orangefox
- Flash persist.img in terminal of the recovery mode
- Edit flash_all.bat and others archives for flashing in EDL MODE (not succesfull, i not gain authorization)
I unlocked bootloader for all proccesing
Obs: The gyroscope, magnetic sensor, proximity sensor and light sensor work correctly.
I do not know what to do now
can anybody help me ?
in the last case, some developer knows how to disable only the accelerometer, that would help me a lot.
- Red ball position of the accelerometer: https://ibb.co/ZMmXwqc
- Accelerator calibration fail: https://ibb.co/hXk8zHc
- Icons upside down in the camera options: https://ibb.co/GC855fv
- Gyroscope Ok: https://ibb.co/tpH3R07
- Light sensor test Ok: https://ibb.co/Rz3CXzg
- Magnetic sensor Ok: https://ibb.co/QvqdPcY
- Proximity sensor Ok: https://ibb.co/KmBG2vk
c.mi.com/thread-2442693-1-0.html
Flash in persist by recovery mode
If anyone gets here after searching for hours without no solution in sight, just drop your phone on the ground. No really, it probably stopped working after you dropped it accidentally, and you'll need to do the same for it to work again. I just hope you have a nice silicon case for it to withstand the fall without breaking into pieces haha