Hi everyone, i have an Oneplus 8 pro BA european one.
I was in 10.5.6 rooted and with xXx rom 11.0
I did this to install 10.5.8 update:
Before all Disable all magisk modules
- Update the Rom: settings> System> System upgrade. WITHOUT REBOOT;
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot.
After reboot magisk seems to be unnistalled:
https://ibb.co/55hJjwH
And also i cant enter into bootloader, i tried first selecting bootloader mode after pressing power buttom,
but in enters in recovery mode not bootloader mode. Then i tried to use ADB commands, adb reboot bootloder. It goes
into recovery again. Finally i tried to select bootloader mode in the recovery, but nothing...
Any idea?
https://youtu.be/mWpstCqT5gw
jumpet said:
Click to expand...
Click to collapse
Isn't that the bootloader itself???
Nandan.R.D said:
Isn't that the bootloader itself???
Click to expand...
Click to collapse
The category of the video is comedy .....
mohammed510 said:
The category of the video is comedy .....
Click to expand...
Click to collapse
:silly::silly::silly:
Nandan.R.D said:
Isn't that the bootloader itself???
Click to expand...
Click to collapse
It is
Lol? comical vid...
Why this thread exists?
Nandan.R.D said:
Isn't that the bootloader itself???
Click to expand...
Click to collapse
didnt knew it was, cause i did fasboot list devices command and nothing happens.
People use to laught at you instead help you btw. Very sad life they have.
[/QUOTE]And also i cant enter into bootloader, i tried first selecting bootloader mode after pressing power buttom,
but in enters in recovery mode not bootloader mode. Then i tried to use ADB commands, adb reboot bootloder. It goes
into recovery again. Finally i tried to select bootloader mode in the recovery, but nothing...
Any idea?[/QUOTE]
Hm...I'm in a similar constellation, after update to 10.5.8 I lost magisk and so root. Somehow the extraction of 10.5.8's boot.img and conversion into magisk_patched.img didn't help me regain boot, but ends in crashdump. But from here, I always can get back to bootloader with long pressing vol+ and power, when screen turns black let go both buttons and immediately press vol- and power which brings me back to recovery, from here into bootloader. reflash stock boot.img and I'm fine, but still no root, of course.
ok now, did you try to simply reflash 10.5.8 from settings/system/systemupdate/local upgrade? :fingers-crossed::fingers-crossed::fingers-crossed:
jumpet said:
didnt knew it was, cause i did fasboot list devices command and nothing happens.
People use to laught at you instead help you btw. Very sad life they have.
Click to expand...
Click to collapse
You are getting in to bootloader , I saw some discussion on the how to root without twrp thread , go check there people are having same issue and I think it works for a dude there and mentioned how he did so :good:
I'm having the same problem. After trying this I get into the CrashDump Mode and can't get out no matter what. Tried to get into the recovery to get fastboot or something but it brings me back to CrashDump Mode. Anybody know how to fix this? kind of don't want a brick here with me... Thanks in advance!
RobotPanda0961 said:
I'm having the same problem. After trying this I get into the CrashDump Mode and can't get out no matter what. Tried to get into the recovery to get fastboot or something but it brings me back to CrashDump Mode. Anybody know how to fix this? kind of don't want a brick here with me... Thanks in advance!
Click to expand...
Click to collapse
you saw my above post? I can always get back to stock recovery like this :fingers-crossed:
jomansch said:
you saw my above post? I can always get back to stock recovery like this :fingers-crossed:
Click to expand...
Click to collapse
I can get into fastboot actually by holding both volume buttons but as soon as I try to get into recovery the screen stays black and my PC says USB device not recognized. I flashed the stock boot image from 10.5.6 but it didn't work as it just goes back to CrashDump Mode...
RobotPanda0961 said:
I can get into fastboot actually by holding both volume buttons but as soon as I try to get into recovery the screen stays black and my PC says USB device not recognized. I flashed the stock boot image from 10.5.6 but it didn't work as it just goes back to CrashDump Mode...
Click to expand...
Click to collapse
try flashing the stock boot.img to both slots ... fastboot set_active (slot), do this for each slot. then fastboot flash boot boot.img (in my case it doesn't matter which slot is set active, my OP8pro does boot anyway). then fastboot boot boot.img. good luck:fingers-crossed:
jomansch said:
try flashing the stock boot.img to both slots ... fastboot set_active (slot), do this for each slot. then fastboot flash boot boot.img (in my case it doesn't matter which slot is set active, my OP8pro does boot anyway). then fastboot boot boot.img. good luck:fingers-crossed:
Click to expand...
Click to collapse
Thank You SO MUCH. I had to set the active slot to slot b in my case and like you said flash the stock boot.img and booted right up! Again, Thank you so much!
Related
'what? lol'
1050F - All Good!
Thanks!
YamYam
ionioni said:
you tried to flash a partition from dnx mode
Click to expand...
Click to collapse
Doh... Been so confused lately....
workdowg said:
Doh...
Click to expand...
Click to collapse
maybe you should put that SMT AoL on a break... the YT2 one is almost forgotten.
ionioni said:
maybe you should put that SMT AoL on a break... the YT2 one is almost forgotten.
Click to expand...
Click to collapse
Probably... I had 3 or 4 more people interested... I posted the working MicroSD install files... But I do feel lonely...
Thanks brother, I will test in upcoming Saturday and will revert back.
a beginner's guide....tnx[emoji1] [emoji1]
@workdowg now that we have a permanent recovery does this mean we can start building cm and kernels? I am almost setup with my machine (just configuring Ubuntu). From what I have read on lenovo website is they messed something up with the charging and battery life in the last update
pug1 said:
@workdowg now that we have a permanent recovery does this mean we can start building cm and kernels? I am almost setup with my machine (just configuring Ubuntu). From what I have read on lenovo website is they messed something up with the charging and battery life in the last update
Click to expand...
Click to collapse
Since the bootloader is unlocked you may do what you wish. Permanent TWRP will make the job easier. Have at it!
As far as the current ROM from Lenovo.... It is really stable for me. I froze the usual suspects and I get about 3-4 days with 8-9hrs SOT. I don't game on this tablet and keep the brightness down to about 1/3.
updated: added compilation from 6.0 sources - TWRP 2.8.7.0(6)
ionioni said:
updated: added compilation from 6.0 sources - TWRP 2.8.7.6
Click to expand...
Click to collapse
Pretty... all good on the 1050F.
1050F (Latest LP OTA): I am able to flash it (bl is unlocked), but cannot access it after that. Stock recovery is still present... am I missing sth??
dtrail1 said:
1050F (Latest LP OTA): I am able to flash it (bl is unlocked), but cannot access it after that. Stock recovery is still present... am I missing sth??
Click to expand...
Click to collapse
it works in the 'live' mode? from dnx (PwrOn with both Vol pressed, screen shows 'fastboot starting...' message):
fastboot flash osloader bootx64.efi
fastboot boot twrp-1050f-b.img
you should also try to boot in the recovery right AFTER you flash it and if it goes twrp means that recovery from boot is still active on your build (and will write the recovery partition with a fresh image that he builds from the boot partition on each normal android start)
what is the OTA you're on?
ionioni said:
it works in the 'live' mode? from dnx (PwrOn with both Vol pressed, screen shows 'fastboot starting...' message):
fastboot flash osloader bootx64.efi
fastboot boot twrp-1050f-b.img
you should also try to boot in the recovery right AFTER you flash it and if it goes twrp means that recovery from boot is still active on your build (and will write the recovery partition with a fresh image that he builds from the boot partition on each normal android start)
Click to expand...
Click to collapse
Already figured it, but thx!! I forgot to FIRST boot it from DNX mode once, and then flash it permanently from fb mode. thx
I have followed each steps mentioned to flash perm. twrp recovery on my YOGA Tablet 2-830LC lollipop, unlocked bootloader; the process of flashing completes successfully yet I am unable to enter into recovery... When ever I try to enter into recovery it simply boots up normally... I have tried entering recovery by both hardware and software modes, but it fails... Kindly help me out of this mess...
Thank you
QuazIqbal said:
I have followed each steps mentioned to flash perm. twrp recovery on my YOGA Tablet 2-830LC lollipop, unlocked bootloader; the process of flashing completes successfully yet I am unable to enter into recovery... When ever I try to enter into recovery it simply boots up normally... I have tried entering recovery by both hardware and software modes, but it fails... Kindly help me out of this mess...
Thank you
Click to expand...
Click to collapse
while i don't know 100% whether it is working or not on your model and since those who download the files don't give their feedback...
try rebooting in recovery, when in normal android, send a adb reboot recovery or boot in fastboot mode and chose the RECOVERY as target with Volkeys and activate with Power button
check also that you flashed the correct img file (you did unzipped the file before flashing no? ) fastboot flash recovery twrp....img
ionioni said:
while i don't know 100% whether it is working or not on your model and since those who download the files don't give their feedback...
try rebooting in recovery, when in normal android, send a adb reboot recovery or boot in fastboot mode and chose the RECOVERY as target with Volkeys and activate with Power button
check also that you flashed the correct img file (you did unzipped the file before flashing no? ) fastboot flash recovery twrp....img
Click to expand...
Click to collapse
I tried all the ways including 'adb reboot recovery and also tried to enter recovery through droidboot but each time it simply rebooted without going into recovery.... I also tried the temp recovery, by these commands "fastboot flash osloader bootx64.efi" & "fastboot boot twrp-830f-b.img" in this case also it simply rebooted in to android os.
P. S. I am able to enter twrp recovery through social design recovery.
any 830 owner can confirm if it is working or not on his device?
QuazIqbal said:
I tried all the ways including 'adb reboot recovery and also tried to enter recovery through droidboot but each time it simply rebooted without going into recovery.... I also tried the temp recovery, by these commands "fastboot flash osloader bootx64.efi" & "fastboot boot twrp-830f-b.img" in this case also it simply rebooted in to android os.
P. S. I am able to enter twrp recovery through social design recovery.
Click to expand...
Click to collapse
1. when you are entering the above two commands are you in DNX mode? ('fastboot starting' on screen)
2. when you upgraded to Lollipop did you used the OTA update process or you just flashed a stock Lollipop rom?
3. boot to your normal Android OS and open Contacts and in the search contacts box enter ####0000# it will open a VersionInfo window, tell me what it says under BIOS version line
by these commands "fastboot flash osloader bootx64.efi" & "fastboot boot twrp-830f-b.img" in this case also it simply rebooted in to android os.
Click to expand...
Click to collapse
4. right after you entered the commands it rebooted (ie you heard the tab buzzing as if you power on from off state) or just continued and booted t Android?
I followed http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 this guide in order to root my new p8lite (ale-l21). And it now starts only in recovery as adb shows but im not sure cuz its black screen for me.
So i got unlocked bootloader and updated it to android 6.0 and it all worked fine untill i installed twrp recovery and tried to enter fastboot. It started to boot only in recovery after trying to get in fastboot.
Any Help?
Im Panicing!!!!~
What to do????!!1
asdfqwerty33 said:
I followed http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 this guide in order to root my new p8lite (ale-l21). And it now starts only in recovery as adb shows but im not sure cuz its black screen for me.
So i got unlocked bootloader and updated it to android 6.0 and it all worked fine untill i installed twrp recovery and tried to enter fastboot. It started to boot only in recovery after trying to get in fastboot.
Any Help?
Im Panicing!!!!~
What to do????!!1
Click to expand...
Click to collapse
Did you try unbricking method? Chapter 4
I also rooted the phone using this method not sure why your phone got into bootloop. What twrp did you flash? 3.0.2? Because that one is for marshmallow.
Suleiman01 said:
Did you try unbricking method? Chapter 4
I also rooted the phone using this method not sure why your phone got into bootloop. What twrp did you flash? 3.0.2? Because that one is for marshmallow.
Click to expand...
Click to collapse
I tried but my phone isnt booting in fastboot it boots only in recovery wich is black screen
I used twrp 3.0.2
asdfqwerty33 said:
I tried but my phone isnt booting in fastboot it boots only in recovery wich is black screen
I used twrp 3.0.2
Click to expand...
Click to collapse
Flash the original recovery and then put firmware(dload folder) in your sdcard and turn on your phone by pressing all buttons. The update should start automatically. Just wait 10~15 mins(even if the screen is black).
Suleiman01 said:
Flash the original recovery and then put firmware(dload folder) in your sdcard and turn on your phone by pressing all buttons. The update should start automatically. Just wait 10~15 mins(even if the screen is black).
Click to expand...
Click to collapse
When i try to flash it to orginal recovery it shows waiting for device and nothing happens
asdfqwerty33 said:
When i try to flash it to orginal recovery it shows waiting for device and nothing happens
Click to expand...
Click to collapse
What happens if you type fastboot devices while phone is in fastboot mode?
Suleiman01 said:
What happens if you type fastboot devices while phone is in fastboot mode?
Click to expand...
Click to collapse
I dont think that i can even enter fastboot. When i try to enter fastboot it enters automaticly recovery mode atleast thats what adb shows
Suleiman01 said:
What happens if you type fastboot devices while phone is in fastboot mode?
Click to expand...
Click to collapse
Holy sh1t i got android back up running . I did like u said pressed all buttons together and waited. Thanks alot man
asdfqwerty33 said:
Holy sh1t i got android back up running . I did like u said pressed all buttons together and waited. Thanks alot man
Click to expand...
Click to collapse
Congratulations. Can you type solved in the title.
Suleiman01 said:
Congratulations. Can you type solved in the title.
Click to expand...
Click to collapse
I dont know how to do that
asdfqwerty33 said:
I dont know how to do that
Click to expand...
Click to collapse
You need to edit first post. Title should be there.
asdfqwerty33 said:
I dont know how to do that
Click to expand...
Click to collapse
SOLVED
I've had my Essential two weeks i was on 8.1 beta.Today i unlocked the boot loader.Then installed twrp while in twrp i side loaded magisk.I went back to fastboot then hit start .The phone just went into a bootloop.I Was able to go back to twrp 2 times but now i can't get back to any type of recovery.I Can get back to fastboot mode ishow all the info and secure boot says yes and device state unlocked.My pc see essential phone fastboot in the device manager but i can't get adb to see it .Can anyone help me ?
forgot something
looks like i skipped this part . Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.Is there anything i can do?
videodave1 said:
I've had my Essential two weeks i was on 8.1 beta.Today i unlocked the boot loader.Then installed twrp while in twrp i side loaded magisk.I went back to fastboot then hit start .The phone just went into a bootloop.I Was able to go back to twrp 2 times but now i can't get back to any type of recovery.I Can get back to fastboot mode ishow all the info and secure boot says yes and device state unlocked.My pc see essential phone fastboot in the device manager but i can't get adb to see it .Can anyone help me ?
Click to expand...
Click to collapse
adb only works while phone is booted into system so nothing wrong there. If you're in the bootloader menu where you see that the status of your device is unlocked then you're already in fastboot mode. Just flash twrp again and the sideload stock 8.1 beta boot image (you can probably find it on xda), sideload magisk too. Go into install and press flash image file and find the stock boot image and then go into install again and change to flash .zip and flash magisk. After that, reboot into system.
WOW thank you so much'
Arju said:
adb only works while phone is booted into system so nothing wrong there. If you're in the bootloader menu where you see that the status of your device is unlocked then you're already in fastboot mode. Just flash twrp again and the sideload stock 8.1 beta boot image (you can probably find it on xda), sideload magisk too. Go into install and press flash image file and find the stock boot image and then go into install again and change to flash .zip and flash magisk. After that, reboot into system.
Click to expand...
Click to collapse
I was able to flash twrp i'll try the rest when i get home from work
sideloading stock img
videodave1 said:
I was able to flash twrp i'll try the rest when i get home from work
Click to expand...
Click to collapse
Do i need it to be zipped I've tried it as image that i downloaded from xda and I've tried a zip i got from Essential neither are working?
zip file
videodave1 said:
Do i need it to be zipped I've tried it as image that i downloaded from xda and I've tried a zip i got from Essential neither are working?
Click to expand...
Click to collapse
When i try i get invalid file format. This is using a zip i got from Essential.
Stuck twrp says no os installed . But i did learn how to push files.
just trying to get back to stock now
videodave1 said:
just trying to get back to stock now
Click to expand...
Click to collapse
https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
thanks been there tried the Oreo beta that is what i was on when i started and tried the 1st build before the betas i get an error on both i'll try to download them on another pc my phone does show up when i type fastboot devices now just need an os now .
Okay got back to 8.1 bootloader still unlocked twrp not install and i don't have root.I may just wait until P comes out.I'll try and learn more about adb. Thanks for your help Arju.
thanks everyone.
videodave1 said:
Okay got back to 8.1 bootloader still unlocked twrp not install and i don't have root.I may just wait until P comes out.I'll try and learn more about adb. Thanks for your help Arju.
Click to expand...
Click to collapse
No problem. Thank you very much for the donation, that was really kind of you. Hey I'm sure you'll get the hang of it before android P drops. you did figure out what went wrong all by yourself so get a hold of the right boot.img and the rest is exactly as how you did it in the first place but flash the boot.img before magisk. Let me know if you want to give it a dive again.
I'm on 8.1 boot loader unlocked and ready to try to root again .Thanks for the help
This is the closest thread i could find to what is happening to my PH-1.
Like videodave1 I 'was' running the latest stock 8.1 and have my bootloader unlocked. In trying to root the phone I did this:
flash boot flash boot twrp.img
adb shell twrp sideload
adb sideload magisk.zip
All installations went well, but when trying to reboot from twrp it forced me to install the app. After that the phone went into boot loop.
* Note how I didn't sideloaded the Oreo 8.1 image before magisk.
By pressing all 3 buttons I can get the phone to reboot and releasing the volume up I can get to Fastboot. Just volume down and power doesn't work.
The problem now is that adb and fastboot no longer recognise the phone. adb devices just gives an empty list and fastboot only shows < waiting for device >
Trying to go into Recovery mode doesn't work either. Power off doesn't work and Restart bootloader, well, restarts the bootloader.
It might be relevant to mention that I'm running adb and fastboot from Terminal in a Mac and that this is my very first and frustrated attempt to root any phone.
For reference this is what the FastBoot Mode brings:
PRODUCT_NAME - Mata
VARIANT - OPENUS
BOOTLOADER VERSION - mata-aad8ac4
BASEBAND VERSION - 2.0.C4-M1.3.1
SECURE BOOT - yes
DEVICE STATE - unlocked
I might have to just resign myself to the ordinary land of unlocked full stock phones
Thanks very much
avocom said:
This is the closest thread i could find to what is happening to my PH-1.
Like videodave1 I 'was' running the latest stock 8.1 and have my bootloader unlocked. In trying to root the phone I did this:
flash boot flash boot twrp.img
adb shell twrp sideload
adb sideload magisk.zip
All installations went well, but when trying to reboot from twrp it forced me to install the app. After that the phone went into boot loop.
* Note how I didn't sideloaded the Oreo 8.1 image before magisk.
By pressing all 3 buttons I can get the phone to reboot and releasing the volume up I can get to Fastboot. Just volume down and power doesn't work.
The problem now is that adb and fastboot no longer recognise the phone. adb devices just gives an empty list and fastboot only shows < waiting for device >
Trying to go into Recovery mode doesn't work either. Power off doesn't work and Restart bootloader, well, restarts the bootloader.
It might be relevant to mention that I'm running adb and fastboot from Terminal in a Mac and that this is my very first and frustrated attempt to root any phone.
For reference this is what the FastBoot Mode brings:
PRODUCT_NAME - Mata
VARIANT - OPENUS
BOOTLOADER VERSION - mata-aad8ac4
BASEBAND VERSION - 2.0.C4-M1.3.1
SECURE BOOT - yes
DEVICE STATE - unlocked
I might have to just resign myself to the ordinary land of unlocked full stock phones
Thanks very much
Click to expand...
Click to collapse
Even though your phone does not show up its there wipe everything.Fallow what Arju said in his post.I got back to stock then took the 8.1 update i'm not rooted but my bootloader is still unlocked.Oh make sure you unlock critical
videodave1 said:
Fallow what Arju said in his post.
Click to expand...
Click to collapse
Thanks for coming back to me. I really appreciate it.
Arju said:
Just flash twrp again and the sideload stock 8.1 beta boot image (you can probably find it on xda), sideload magisk too.
Click to expand...
Click to collapse
I might be missing something hopefully obvious here. How can I flash twrp again if I my computer can't see the phone. With the USB phone plugged in and in the FastBoot screen I enter into Terminal:
fastboot flash boot twrp.img
and I get:
< waiting for any device >
How do I flash it from the FastBoot screen? BTW, going to Recovery mode just hangs at the Essential logo.
Thanks
avocom said:
Thanks for coming back to me. I really appreciate it.
I might be missing something hopefully obvious here. How can I flash twrp again if I my computer can't see the phone. With the USB phone plugged in and in the FastBoot screen I enter into Terminal:
fastboot flash boot twrp.img
and I get:
< waiting for any device >
How do I flash it from the FastBoot screen? BTW, going to Recovery mode just hangs at the Essential logo.
Thanks
Click to expand...
Click to collapse
are you able to get to the bootloader menu? where it says start on the top.
Arju said:
are you able to get to the bootloader menu? where it says start on the top.
Click to expand...
Click to collapse
Thanks Arju. If you are referring to the FastBoot menu where you can use the up and down volume keys to select Start, Restart Bootloader, Recovery mode and Power off Yes, but not much else unfortunately.
If I select Recovery mode I don't go to the screen with the blue buttons from twrp.
Thanks
avocom said:
Thanks Arju. If you are referring to the FastBoot menu where you can use the up and down volume keys to select Start, Restart Bootloader, Recovery mode and Power off Yes, but not much else unfortunately.
If I select Recovery mode I don't go to the screen with the blue buttons from twrp.
Thanks
Click to expand...
Click to collapse
What you need to understand is that twrp will not stick after you flash it. This device does not have a recovery partition and that's why you replace the boot partition with twrp and while you're in twrp you need to flash the boot.img back and whatever mods on top of that such as kernel etc.. If you flash a rom then it will replace the twrp with the boot.img found in the rom zip.
So now we need the computer to recognize you device. Could you unplug the cable and change the usb port on you computer. connect your phone while you're in the bootloader menu where it says start on the top.
The use use fastboot command: fastboot devices
See if the computer recognizes you device.
Was on Rooted device (Magisk), phone got OTA updated, lost root and TWRP, I tried flashing via cmd "twrp-3.2.3-x_blu_spark_v9.86_op6.img" in fastboot mode. Now the phone is forever stuck on the fastboot screen. It won't even switch off. Please tell me how to get out of this situation.
Literally had this happen to me today. Hold volume up and power button worked for me eventually
anthonyg45157 said:
Literally had this happen to me today. Hold volume up and power button worked for me eventually
Click to expand...
Click to collapse
I tried this, the screen goes off for 0.5 seconds and the same Fastboot screen shows up again.
Edit: Never mind, it finally worked after few tries, thanks.
jokerooney said:
I tried this, the screen goes off for 0.5 seconds and the same Fastboot screen shows up again.
Edit: Never mind, it finally worked after few tries, thanks.
Click to expand...
Click to collapse
The device is finally booting, please tell me how do I get my TWRP back now?
jokerooney said:
The device is finally booting, please tell me how do I get my TWRP back now?
Click to expand...
Click to collapse
I used my computer to boot twrp.img then flash twrp.zip
I still don't understand why so many people are using blue spark TWRP..... Nearly all posts in the last few days talking about issues related with twrp were with this one out with outdated versions of mauronaufrio's.
The TWRP to use is latest mauronaufrio's one there is a whole thread about it.
You don't 'flash' twrp in fastboot mode. You temporarily boot the phone with TWRP: 'fastboot boot twrp.img'
And THEN only you flash twrp installer from within this booted twrp.
Striatum_bdr said:
I still don't understand why so many people are using blue spark TWRP..... Nearly all posts in the last few days talking about issues related with twrp were with this one out with outdated versions of mauronaufrio's.
The TWRP to use is latest mauronaufrio's one there is a whole thread about it.
You don't 'flash' twrp in fastboot mode. You temporarily boot the phone with TWRP: 'fastboot boot twrp.img'
And THEN only you flash twrp installer from within this booted twrp.
Click to expand...
Click to collapse
Can you please share mauronaufrio's thread link here? Thanks
jokerooney said:
Can you please share mauronaufrio's thread link here? Thanks
Click to expand...
Click to collapse
Man, there is a whole thread in ROM section.... It's called TWRP
Hi, I've been using a Motorola Moto G6 Plus for quite a long time now. However, I can't figure out why it doesn't show any boot logo at startup, getting a black screen but a USB signal to my PC in fastboot mode (PC detects it at Fastboot evert S, which is good). Can anyone tell me or help me figure out why this phone isn't giving me boot logo's and fastboot?
First of all i wanna make clear that:
1. Can you reboot to system?
2. Can you reboot to recovery?
3. You have Root access in your phone?
Please consider answring.
ai.Sanaul said:
First of all i wanna make clear that:
1. Can you reboot to system?
2. Can you reboot to recovery?
3. You have Root access in your phone?
Please consider answring.
Click to expand...
Click to collapse
Yes, the system works as normal. It runs stock Android 9, not rooted. It doesn't have any recovery installed, and when I try to reboot to ADB, it gives the same black screen as the boot logo and bootloader. The screen is slightly lighting up, so I know it powers up, but it doesn't give the screen I want, the default bootloader screen.
DaHolyBlobfish said:
Yes, the system works as normal. It runs stock Android 9, not rooted. It doesn't have any recovery installed, and when I try to reboot to ADB, it gives the same black screen as the boot logo and bootloader. The screen is slightly lighting up, so I know it powers up, but it doesn't give the screen I want, the default bootloader screen.
Click to expand...
Click to collapse
OK, try flashing stock boot.img through Fastboot or TWRP, this should work.
ai.Sanaul said:
OK, try flashing stock boot.img through Fastboot or TWRP, this should work.
Click to expand...
Click to collapse
TWRP already isn't an option, and I don't know how to do it with fastboot. Could you guide me through that?
OK, so first of all i wanna make clear that you don't use this phone as primary phone because unlocking bootloader and Flashing have chances that your data might be erased, so BACK Up all of your DATA to a safe place before doing this.
If everything is set, Lets move ahead by unlocking your phone's bootloader and flashing. Watch this this tutorial:
Download boot.img file of your phone &
After that boot your phone in fastboot mode connect it to PC and, type this command in CMD fastboot flash boot (boot.img path)
Hope this helps!
ai.Sanaul said:
OK, so first of all i wanna make clear that you don't use this phone as primary phone because unlocking bootloader and Flashing have chances that your data might be erased, so BACK Up all of your DATA to a safe place before doing this.
If everything is set, Lets move ahead by unlocking your phone's bootloader and flashing. Watch this this tutorial:
Download boot.img file of your phone &
After that boot your phone in fastboot mode connect it to PC and, type this command in CMD fastboot flash boot (boot.img path)
Hope this helps!
Click to expand...
Click to collapse
I didn't read your message fully, so didn't back up my phone... Lucky me this isn't my primary phone and it didn't erase anything. It didn't help me though.
Edit: Now that I try booting into Android, it gives the same black screen as the bootloader and logo. I'm starting to think that it unfortunately erased my phone.
Maybe try flashing full stock?
Arealhooman said:
You said Orem unlocking isnt on? How about Adb debugging?
Click to expand...
Click to collapse
I unlocked the bootloader 2 years ago, and ADB is on, but idk if ADB works without android showing up on the screen
Arealhooman said:
Maybe try flashing full stock?
Click to expand...
Click to collapse
Let's try that. How do I flash that with fastboot or adb?
DaHolyBlobfish said:
I unlocked the bootloader 2 years ago, and ADB is on, but idk if ADB works without android showing up on the screen
Click to expand...
Click to collapse
It doesnt. You need a custom recovery or be booted or booting.
DaHolyBlobfish said:
Let's try that. How do I flash that with fastboot or adb?
Click to expand...
Click to collapse
watch this video tutorial (turn on auto translate captions)