Database Users

LOL forgot how to Flash recovery! :)

ok so its been a while since i played with my LG.
ok so i tried flashing recovery through fastboot but it doesn't work.
i tried flashing it through phone but it doesnt work. I am currently on 2.1 stock
and wanting to flash a custom rom. BUt i don't have recovery or raidzero.
ok this is what i did.
i Downloaded recovery and put my phone into fastboot and connnected it to PC.
then i used fastbootflasherv2 to flash recovery. usually a CMD popps up and starts doing stuff, but when i did it the CMD came up and disappeared in 0.0000234secs
and it said i have sucessfully flashed and now my phone will reboot.
After reboot still no recovery.
Then i tried flashing recovery through my phone.
Downloaded Root Toolbox Pro. Flash recovery and done.
After reboot i press home button and it goes to fastboot.
Can anyone help me here?

manually type the codes? or i can upload my own .bat flasher
Edit: http://d-h.st/hxn

bs828 said:
manually type the codes? or i can upload my own .bat flasher
Edit: http://d-h.st/hxn
Click to expand...
Click to collapse
trying it

bs828 said:
manually type the codes? or i can upload my own .bat flasher
Edit: http://d-h.st/hxn
Click to expand...
Click to collapse
oh yeah by the way it the recovery flasher u gave me doesnt work.

androidboss7 said:
oh yeah by the way it the recovery flasher u gave me doesnt work.
Click to expand...
Click to collapse
flashing KDZ again to fix this problem!

u are mad... what do you mean dont work?

bs828 said:
u are mad... what do you mean dont work?
Click to expand...
Click to collapse
weird i finished flashing it without problem but when i check phone no data was
lost expect root!
If it doesn't work i will just do it again!
its kinda fun to do it because everyone thinks its soooo dangerous but its not if
you do it correctly!

I'm sure you tried the command "fastboot flash recovery recovery.img" If its not working try flashing KDZ with fastboot again

Sadronis said:
I'm sure you tried the command "fastboot flash recovery recovery.img" If its not working try flashing KDZ with fastboot again
Click to expand...
Click to collapse
lol nah dont need to do it again! it flashes now!
this is proof that flashing a KDZ rom fixes almost all problems!

that is the command in the bat i gave him

bs828 said:
that is the command in the bat i gave him
Click to expand...
Click to collapse
well at first urs didn't work as well!
But after flash KDZ it works. thanks for that!
Another problem though because my volume down is broken i think i need
touch recovery!

hheheheh my up is dead down is working abit but the recovery i gave you can use menu key and home to navigate! that why i like it!!

(Finally solved) Bricked, can't boot into recovery,system,bootloader. Always bootlogo

Help me pls
Tried to flash latest sokkoban rom and boom, no more twrp or bootloader.
PC isn't detecting anything
holding buttons do nothing but restart

Hello
I join this request I have exactly the same thing. Phone fell. I do not want to work just restart.
The phone is not charging

Mine is charging but red led always blinking

For me it is so red LED flashes, but after disconnecting from the charger falls quite

diabolo24 said:
For me it is so red LED flashes, but after disconnecting from the charger falls quite
Click to expand...
Click to collapse
Same :/

Audriuskins said:
Help me pls
Tried to flash latest sokkoban rom and boom, no more twrp or bootloader.
PC isn't detecting anything
holding buttons do nothing but restart
Click to expand...
Click to collapse
you should be able to boot in fastboot/rescue mod by press and hold volume down,conect your usb cable on pc and press power button,once there,flash via fastboot this files:boot,recovery,cust and system according to your build number

cristi.blidariu said:
you should be able to boot in fastboot/rescue mod by press and hold volume down,conect your usb cable on pc and press power button,once there,flash via fastboot this files:boot,recovery,cust and system according to your build number
Click to expand...
Click to collapse
doesn't help, phone just restarts and shows logo all the time

Audriuskins said:
doesn't help, phone just restarts and shows logo all the time
Click to expand...
Click to collapse
Well i am sorry but,that the only method that i known kepp try

cristi.blidariu said:
Well i am sorry but,that the only method that i known kepp try
Click to expand...
Click to collapse
kaip tu taip galejai supist per twrp?

staska_lt said:
kaip tu taip galejai supist per twrp?
Click to expand...
Click to collapse
flashed latest sokkoban's mod

diabolo24 said:
Hello
I join this request I have exactly the same thing. Phone fell. I do not want to work just restart.
The phone is not charging
Click to expand...
Click to collapse
Audriuskins said:
Help me pls
Tried to flash latest sokkoban rom and boom, no more twrp or bootloader.
PC isn't detecting anything
holding buttons do nothing but restart
Click to expand...
Click to collapse
1. What is your previous build?
2. What is your region(location)?
3. What version of TWRP used?

sokkoban said:
1. What is your previous build?
2. What is your region(location)?
3. What version of TWRP used?
Click to expand...
Click to collapse
1. L21- 574
2. Eu
3. 3.0.2
I have this same problem always bootlogo , cant do nothing, sorry for my bad english :silly:

sokkoban said:
1. What is your previous build?
2. What is your region(location)?
3. What version of TWRP used?
Click to expand...
Click to collapse
Check op
it was latest twrp and b582 if im correct
eu

Audriuskins said:
flashed latest sokkoban's mod
Click to expand...
Click to collapse
neimanoma blet, reikejo bakupa pasidaryt

staska_lt said:
neimanoma blet, reikejo bakupa pasidaryt
Click to expand...
Click to collapse
po flashinimo ir rebootinimo, BUVO NEIMANOMA patekt nei i twrp nei i bootloader. bandziau viska

My data:
1. L21- 574
2. Eu
3. 3.0.2
Attempting to upload rom sokkoban. Cleared as described, TWRP + rom nothing.
Any suggestions to solve the problem?

after fastboot reboot problem occurs again. No more fastboot and recovery

Audriuskins said:
after fastboot reboot problem occurs again. No more fastboot and recovery
Click to expand...
Click to collapse
I wiped my phone twice and twice install custom always booted about 10-15min.
I cannot understand where is the error, but you can try this method:
1. Install TWRP v3.0.2 (by Xepeleato)
1. Download the stock ROM B584
2. Install stock ROM with TWRP
3. When phone booted to stock B584 install again TWRP v3.0.2 (by Xepeleato)
4. Try install custom B584
Wish you luck!

sokkoban said:
I wiped my phone twice and twice install custom always booted about 10-15min.
I cannot understand where is the error, but you can try this method:
1. Install TWRP v3.0.2 (by Xepeleato)
1. Download the stock ROM B584
2. Install stock ROM with TWRP
3. When phone booted to stock B584 install again TWRP v3.0.2 (by Xepeleato)
4. Try install custom B584
Wish you luck!
Click to expand...
Click to collapse
Can't try anything because I've said that fastboot/recovery isn't working anymore. And red led is blinking :/

Audriuskins said:
Can't try anything because I've said that fastboot/recovery isn't working anymore. And red led is blinking :/
Click to expand...
Click to collapse
Try boot into fastboot by typing the command
Code:
adb reboot bootloader

HUAWEI P8lite stuck at Huawei logo... Help plz !

So, my phone is stuck at huawei's logo...
I can't enter fastboot mode with the buttons, and when i want to do with the cmd, "device not found" ... So, I can't flash the .img
I tried to put a dload file on a sdcard and press volume up and down with the power button but nothing happens.
I really don't know what to do, PLEASE HELP ME !!
THANKS

Xil0s said:
So, my phone is stuck at huawei's logo...
I can't enter fastboot mode with the buttons, and when i want to do with the cmd, "device not found" ... So, I can't flash the .img
I tried to put a dload file on a sdcard and press volume up and down with the power button but nothing happens.
I really don't know what to do, PLEASE HELP ME !!
THANKS
Click to expand...
Click to collapse
You need to wait 20 minutes after updating from sdcard.

Suleiman01 said:
You need to wait 20 minutes after updating from sdcard.
Click to expand...
Click to collapse
k i'll try again

Suleiman01 said:
You need to wait 20 minutes after updating from sdcard.
Click to expand...
Click to collapse
Don't work ;(

Xil0s said:
Don't work ;(
Click to expand...
Click to collapse
Do you have twrp or the Huawei recovery? By the way did you try fastboot commands? Not adb. Both are different things.

Suleiman01 said:
Do you have twrp or the Huawei recovery? By the way did you try fastboot commands? Not adb. Both are different things.
Click to expand...
Click to collapse
I tried fastboot commands too... So I haven't any access to my phone by my computer. Btw, what are TWRP and Huawei recovery ? Does it helps if i don't have access to my phone ?
Thanks.

Xil0s said:
I tried fastboot commands too... So I haven't any access to my phone by my computer. Btw, what are TWRP and Huawei recovery ? Does it helps if i don't have access to my phone ?
Thanks.
Click to expand...
Click to collapse
Did you flash any custom recovery on your phone? TWRP (team win recovery project). What happens when you get in fastboot boot and rescue mode? Black screen? Does your phone charges if you connect It to charger? If yes then it is good news.

Suleiman01 said:
Did you flash any custom recovery on your phone? TWRP (team win recovery project). What happens when you get in fastboot boot and rescue mode? Black screen? Does your phone charges if you connect It to charger? If yes then it is good news.
Click to expand...
Click to collapse
I can't get into fastboot and rescue mode but when I plug it into the compute, it charges. I didn't flashed any custom recovery :/

[SOLVED] Stuck at logo after flashing v20b zip

I was flashing the MM zip file that was provided with TWRP but when the phone restarted it just got stuck on the logo (not the lg one). Can anyone help me?

RazorMKD said:
I was flashing the MM zip file that was provided with TWRP but when the phone restarted it just got stuck on the logo (not the lg one). Can anyone help me?
Click to expand...
Click to collapse
Did you wipe data before that ?

mayankjet said:
Did you wipe data before that ?
Click to expand...
Click to collapse
I made a mistake by flashing the SuperSU zip without booting into the system first. Can you tell me how to boot into recovery with the hardware buttons ?

Turn off your device then hold down power off + volume down button when you see lg logo release the power button for a second while keeping the volume down button pressed then press and hold down power button again with the volume down pressed. Your phone should boot up into factory reset menu click yes to factory reset. Don't worry click yes to factory reset. It will boot into twrp.
NOTE:- It will only work if you have latest twrp build installed, won't work, if you have first build installed.

mayankjet said:
Turn off your device then hold down power off + volume down button when you see lg logo release the power button for a second while keeping the volume down button pressed then press and hold down power button again with the volume down pressed. Your phone should boot up into factory reset menu click yes to factory reset. Don't worry click yes to factory reset. It will boot into twrp.
NOTE:- It will only work if you have latest twrp build installed, won't work, if you have first build installed.
Click to expand...
Click to collapse
If you still have the first build, you can still enter the recovery by adb with "adb reboot recovery" while the factory reset scrip of the twrp runs. It won't be immediate, you'll probably lose your data but it will work
---------- Post added at 07:18 PM ---------- Previous post was at 07:15 PM ----------
RazorMKD said:
I made a mistake by flashing the SuperSU zip without booting into the system first. Can you tell me how to boot into recovery with the hardware buttons ?
Click to expand...
Click to collapse
You need to use at least SuperSU 2.79, previous versions won't boot and will get stuck al LG logo.:good:
[Happened to me >.<' ]

The problem is I can't start my phone at all. Can't get adb because I can't boot up the system. When I go to recovery TWRP just does something and reboots to the system where it gets stuck again.

RazorMKD said:
The problem is I can't start my phone at all. Can't get adb because I can't boot up the system. When I go to recovery TWRP just does something and reboots to the system where it gets stuck again.
Click to expand...
Click to collapse
Similar thing happened to @MadjijaHacker
https://forum.xda-developers.com/lg...e-poland-v20b-stock-rom-t3565676/post71338313
but, then, he managed to get solved it:
https://forum.xda-developers.com/lg...e-poland-v20b-stock-rom-t3565676/post71339075
You can ask him how did it.

walterfuster said:
Similar thing happened to @MadjijaHacker
https://forum.xda-developers.com/lg...e-poland-v20b-stock-rom-t3565676/post71338313
but, then, he managed to get solved it:
https://forum.xda-developers.com/lg...e-poland-v20b-stock-rom-t3565676/post71339075
You can ask him how did it.
Click to expand...
Click to collapse
I just falshed wrong zip, i flashed rom template, not actual rom
Sent from my LG-H440 using Tapatalk

RazorMKD said:
The problem is I can't start my phone at all. Can't get adb because I can't boot up the system. When I go to recovery TWRP just does something and reboots to the system where it gets stuck again.
Click to expand...
Click to collapse
That "something" that twrp does is probably the factory reset scrip, so you have to keep the phone plug and adb running so while it's doing "that something" use "adb reboot recovery" command

69PerTTu69 said:
That "something" that twrp does is probably the factory reset scrip, so you have to keep the phone plug and adb running so while it's doing "that something" use "adb reboot recovery" command
Click to expand...
Click to collapse
Just tried that and still no success, adb doesn't even register the device while the script is running.

RazorMKD said:
Just tried that and still no success, adb doesn't even register the device while the script is running.
Click to expand...
Click to collapse
Only option left is Download Mode and flash .kdz again.
Take out batery, plug the phone and put the battery on while pressing vol+
By the way, which SuperSu version did you use?

69PerTTu69 said:
Only option left is Download Mode and flash .kdz again.
Take out batery, plug the phone and put the battery on while pressing vol+
By the way, which SuperSu version did you use?
Click to expand...
Click to collapse
I used SuperSU v2.79
[Edit] By the way which tool do I use to flash the old kdz ?

RazorMKD said:
I used SuperSU v2.79
Click to expand...
Click to collapse
I really don't know what happened then. I flashed SuperSU and MM altogether several times (Trying to fix another problem) and I never had a problem.
But well, as long as you have Download Mode you can always start from scratch

69PerTTu69 said:
I really don't know what happened then. I flashed SuperSU and MM altogether several times (Trying to fix another problem) and I never had a problem.
But well, as long as you have Download Mode you can always start from scratch
Click to expand...
Click to collapse
I did that trice trying to fix my problem, 3rd time i figured my mistake
Sent from my LG-H440 using Tapatalk

RazorMKD said:
I used SuperSU v2.79
[Edit] By the way which tool do I use to flash the old kdz ?
Click to expand...
Click to collapse
LG Flash Tool 2014
Remember, without battery plug it to the computer, press Vol+ and then put the battery. It'll show you a message telling you to keep de Vol+ until the "Download Mode" screen appears
Goodluck!:good:

Ok so I got everything back to normal thanks to you guys. But I have a question. I found that there are 2 aboot.bin files in the system. One is in dev/block/bootdevice and one is in dev/block/platform. So do I run the command twice for both or do I do just one ?

RazorMKD said:
Ok so I got everything back to normal thanks to you guys. But I have a question. I found that there are 2 aboot.bin files in the system. One is in dev/block/bootdevice and one is in dev/block/platform. So do I run the command twice for both or do I do just one ?
Click to expand...
Click to collapse
These are the same. Just do
Code:
dd if=/sdcard/aboot_v10f.bin of=/dev/block/mmcblk0p5
assuming aboot_v10f.bin (the patched aboot) is on the root of internal storage.

Thank you very much to everyone that helped. Everything worked perfectly. Had some problems with the official TWRP app so I used Flashify to flash the recovery. For now I am going to use the v10f rom until there is a custom one ( hope we get LineageOS soon ).

Add [SOLVED ]the post title too!
Glad we were useful!

Cant enter into bootloader after Upgrade to 10.5.8

Hi everyone, i have an Oneplus 8 pro BA european one.
I was in 10.5.6 rooted and with xXx rom 11.0
I did this to install 10.5.8 update:
Before all Disable all magisk modules
- Update the Rom: settings> System> System upgrade. WITHOUT REBOOT;
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot.​
After reboot magisk seems to be unnistalled:
https://ibb.co/55hJjwH
And also i cant enter into bootloader, i tried first selecting bootloader mode after pressing power buttom,
but in enters in recovery mode not bootloader mode. Then i tried to use ADB commands, adb reboot bootloder. It goes
into recovery again. Finally i tried to select bootloader mode in the recovery, but nothing...
Any idea?

https://youtu.be/mWpstCqT5gw

jumpet said:
Click to expand...
Click to collapse
Isn't that the bootloader itself???

Nandan.R.D said:
Isn't that the bootloader itself???
Click to expand...
Click to collapse
The category of the video is comedy .....

mohammed510 said:
The category of the video is comedy .....
Click to expand...
Click to collapse
:silly::silly::silly:

Nandan.R.D said:
Isn't that the bootloader itself???
Click to expand...
Click to collapse
It is

Lol? comical vid...

Why this thread exists?

Nandan.R.D said:
Isn't that the bootloader itself???
Click to expand...
Click to collapse
didnt knew it was, cause i did fasboot list devices command and nothing happens.
People use to laught at you instead help you btw. Very sad life they have.

[/QUOTE]And also i cant enter into bootloader, i tried first selecting bootloader mode after pressing power buttom,
but in enters in recovery mode not bootloader mode. Then i tried to use ADB commands, adb reboot bootloder. It goes
into recovery again. Finally i tried to select bootloader mode in the recovery, but nothing...
Any idea?[/QUOTE]
Hm...I'm in a similar constellation, after update to 10.5.8 I lost magisk and so root. Somehow the extraction of 10.5.8's boot.img and conversion into magisk_patched.img didn't help me regain boot, but ends in crashdump. But from here, I always can get back to bootloader with long pressing vol+ and power, when screen turns black let go both buttons and immediately press vol- and power which brings me back to recovery, from here into bootloader. reflash stock boot.img and I'm fine, but still no root, of course.
ok now, did you try to simply reflash 10.5.8 from settings/system/systemupdate/local upgrade? :fingers-crossed::fingers-crossed::fingers-crossed:

jumpet said:
didnt knew it was, cause i did fasboot list devices command and nothing happens.
People use to laught at you instead help you btw. Very sad life they have.
Click to expand...
Click to collapse
You are getting in to bootloader , I saw some discussion on the how to root without twrp thread , go check there people are having same issue and I think it works for a dude there and mentioned how he did so :good:

I'm having the same problem. After trying this I get into the CrashDump Mode and can't get out no matter what. Tried to get into the recovery to get fastboot or something but it brings me back to CrashDump Mode. Anybody know how to fix this? kind of don't want a brick here with me... Thanks in advance!

RobotPanda0961 said:
I'm having the same problem. After trying this I get into the CrashDump Mode and can't get out no matter what. Tried to get into the recovery to get fastboot or something but it brings me back to CrashDump Mode. Anybody know how to fix this? kind of don't want a brick here with me... Thanks in advance!
Click to expand...
Click to collapse
you saw my above post? I can always get back to stock recovery like this :fingers-crossed:

jomansch said:
you saw my above post? I can always get back to stock recovery like this :fingers-crossed:
Click to expand...
Click to collapse
I can get into fastboot actually by holding both volume buttons but as soon as I try to get into recovery the screen stays black and my PC says USB device not recognized. I flashed the stock boot image from 10.5.6 but it didn't work as it just goes back to CrashDump Mode...

RobotPanda0961 said:
I can get into fastboot actually by holding both volume buttons but as soon as I try to get into recovery the screen stays black and my PC says USB device not recognized. I flashed the stock boot image from 10.5.6 but it didn't work as it just goes back to CrashDump Mode...
Click to expand...
Click to collapse
try flashing the stock boot.img to both slots ... fastboot set_active (slot), do this for each slot. then fastboot flash boot boot.img (in my case it doesn't matter which slot is set active, my OP8pro does boot anyway). then fastboot boot boot.img. good luck:fingers-crossed:

jomansch said:
try flashing the stock boot.img to both slots ... fastboot set_active (slot), do this for each slot. then fastboot flash boot boot.img (in my case it doesn't matter which slot is set active, my OP8pro does boot anyway). then fastboot boot boot.img. good luck:fingers-crossed:
Click to expand...
Click to collapse
Thank You SO MUCH. I had to set the active slot to slot b in my case and like you said flash the stock boot.img and booted right up! Again, Thank you so much!