Good evening to all xda communities, I have always had deep esteem for you, for what is published here, and I didn't think that one day I too would have written something here but hey, here I am. Two days ago I installed the Pixel Experience (very nice rom, very fluid and stable) but today I wanted to put the stock rom (xiaomi redmi note 7) on my device. Only I can't understand how to do it, there is some good soul who could explain to me step by step what I should do. I pay coffee to anyone who wants to help me, I'm still a good samaritan. Thanks.
When I want to back to the stock rom, I do this with miflash. Download miflash, download the latest fastboot rom (it's a tgz file, you must decompress it in your desktop in a apart folder). Connect your device in fastboot mode. With miflash search the ROM and press en clean and lock bootloader, or only clean. This process always works for me.
Miguel Burdo said:
When I want to back to the stock rom, I do this with miflash. Download miflash, download the latest fastboot rom (it's a tgz file, you must decompress it in your desktop in a apart folder). Connect your device in fastboot mode. With miflash search the ROM and press en clean and lock bootloader, or only clean. This process always works for me.
Click to expand...
Click to collapse
do I have to download the rom on the miui website and flash it as if it were a custom? I thought it was so ..
Why lock bootloader ? I wonder why I'm an ignorant ahah
madame vulva said:
do I have to download the rom on the miui website and flash it as if it were a custom? I thought it was so ..
Why lock bootloader ? I wonder why I'm an ignorant ahah
Click to expand...
Click to collapse
You can download the fastboot ROM in Mifirm (sorry xba doesn't allow me post links).
I always do it with miflash because I like to have the device as it were new. This is why I lock the bootloader. This installation is cleaner than the recovery one.
By the way you can download the recovery version and flash it by recovery as if it were a custom and don't lock the bootloader. I have never done it in this way.
Miguel Burdo said:
You can download the fastboot ROM in Mifirm (sorry xba doesn't allow me post links).
I always do it with miflash because I like to have the device as it were new. This is why I lock the bootloader. This installation is cleaner than the recovery one.
By the way you can download the recovery version and flash it by recovery as if it were a custom and don't lock the bootloader. I have never done it in this way.
Click to expand...
Click to collapse
What rom fastboot version should I download? In the xiaomi community, one user advised me on the ee version
madame vulva said:
What rom fastboot version should I download? In the xiaomi community, one user advised me on the ee version
Click to expand...
Click to collapse
Which version did you have when you bought it? Mine is global version, so I download the latest global.
Miguel Burdo said:
Which version did you have when you bought it? Mine is global version, so I download the latest global.
Click to expand...
Click to collapse
The problem is that I do not remember, I was advised to use a tool of the xiaomi to see and gave me this result: "Congratulations! You can be assured the phone you have purchased is the official international version."
madame vulva said:
The problem is that I do not remember, I was advised to use a tool of the xiaomi to see and gave me this result: "Congratulations! You can be assured the phone you have purchased is the official international version."
Click to expand...
Click to collapse
International is golbal version, you can try with global, but european version should work too.
Miguel Burdo said:
International is golbal version, you can try with global, but european version should work too.
Click to expand...
Click to collapse
But could this break the phone if I choose the wrong one? That's all my fear
madame vulva said:
But could this break the phone if I choose the wrong one? That's all my fear
Click to expand...
Click to collapse
No. Only the European version has more restrictions.
Miguel Burdo said:
No. Only the European version has more restrictions.
Click to expand...
Click to collapse
What kind of restrictions?
madame vulva said:
What kind of restrictions?
Click to expand...
Click to collapse
They are practically the same, but as far as I know, the volume of headphones is lower in European version.
Miguel Burdo said:
They are practically the same, but as far as I know, the volume of headphones is lower in European version.
Click to expand...
Click to collapse
just change the region, as I did when selecting switzerland
madame vulva said:
just change the region, as I did when selecting switzerland
Click to expand...
Click to collapse
Yes, or Andorra also works. Then you can flash the one you want without fear.
Miguel Burdo said:
Yes, or Andorra also works. Then you can flash the one you want without fear.
Click to expand...
Click to collapse
opening miflash gives me this screen and if i click okay I get that little square in Chinese but the program seems to be going, is this a problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
madame vulva said:
opening miflash gives me this screen and if i click okay I get that little square in Chinese but the program seems to be going, is this a problem?
Click to expand...
Click to collapse
It seems that you need install the drivers before. Then press refresh
Miguel Burdo said:
It seems that you need install the drivers before. Then press refresh
Click to expand...
Click to collapse
What drivers? Do you have a please link?
madame vulva said:
What drivers? Do you have a please link?
Click to expand...
Click to collapse
The redmi note 7 drivers. https://usbdriverspie.com/xiaomi-redmi-note-7/
Miguel Burdo said:
The redmi note 7 drivers. https://usbdriverspie.com/xiaomi-redmi-note-7/
Click to expand...
Click to collapse
installed but nothing, however the program goes, only when I click on the driver does I get that screen, do you think it can give me errors if I try to do what I have to do with that program, sorry for the pun
madame vulva said:
installed but nothing, however the program goes, only when I click on the driver does I get that screen, do you think it can give me errors if I try to do what I have to do with that program, sorry for the pun
Click to expand...
Click to collapse
If you installed pixel experience before, you must have the drivers, don't click in install, ignore it. Click in refresh and when miflash recognize your device, click in flash.
Related
Hi pros, I owned a galaxy S II. I was happy with it and I suddenly wanted to upgrade as I wanted to keep up with the latest firmware. So I upgraded from Gingerbread 2.3.3 to 2.3.4. I downloaded the odin3 and I accessed the download mode so I started the upgrade. The upgrade was done but the phone didn't reboot! So I shut it down and rebooted and the phone turned like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is there any way I can solve this issue without the need of sending it for a repair? Any helps appreciated. TKs.
Try using keis emergency firmware recovery in tools if that dont work get a jig from ebay
bryanqjx said:
Hi pros, I owned a galaxy S II. I was happy with it and I suddenly wanted to upgrade as I wanted to keep up with the latest firmware. So I upgraded from Gingerbread 2.3.3 to 2.3.4. I downloaded the odin3 and I accessed the download mode so I started the upgrade. The upgrade was done but the phone didn't reboot! So I shut it down and rebooted and the phone turned like this
Is there any way I can solve this issue without the need of sending it for a repair? Any helps appreciated. TKs.
Click to expand...
Click to collapse
take the battery out for like 2 mins, and try accessing the download mode again. don't panic, its not a hardware brick mate.
Thanks for ur generous replies guys!
petsasj said:
take the battery out for like 2 mins, and try accessing the download mode again. don't panic, its not a hardware brick mate.
Click to expand...
Click to collapse
Really!... Thanks for telling me, I thought it was a hardware brick. So what do I do when I accessed the download mode?
bryanqjx said:
Thanks for ur generous replies guys!
Really!... Thanks for telling me, I thought it was a hardware brick. So what do I do when I accessed the download mode?
Click to expand...
Click to collapse
Flash another firmware from scratch using Odin. Use Intratech's ROMs, its under the Original Development section. If you want, you can use the latest XWKI4.
petsasj said:
Flash another firmware from scratch using Odin. Use Intratech's ROMs, its under the Original Development section. If you want, you can use the latest XWKI4.
Click to expand...
Click to collapse
Thanks for replying. Can I flash back my original 2.3.3 firmware or use the ZCKH2 Gingerbread 2.3.4 Firmware which I wanted earlier?
bryanqjx said:
Thanks for replying. Can I flash back my original 2.3.3 firmware or use the ZCKH2 Gingerbread 2.3.4 Firmware which I wanted earlier?
Click to expand...
Click to collapse
Where do you live exactly? ZC firmware is for Asian users. Do you live in Asia? If yes, feel free. Just use Intratech's pack for a change, and dont rush things.
You guys need to read more before trying to flash stuff on your phones, thank god Samsung made this phone difficult to brick
Click here and read carefully before flashing
Bare in mind these roms are for the international version I9100
petsasj said:
Where do you live exactly? ZC firmware is for Asian users. Do you live in Asia? If yes, feel free. Just use Intratech's pack for a change, and dont rush things.
Click to expand...
Click to collapse
Yes, I do live in asia. I checked out the intratech's pack and found out that they are KH. Can I still use it?
bryanqjx said:
Yes, I do live in asia. I checked out the intratech's pack and found out that they are KH. Can I still use it?
Click to expand...
Click to collapse
Can you remember the exact model of your phone, international firmware does not work on certain Chinese devices
bryanqjx said:
Yes, I do live in asia. I checked out the intratech's pack and found out that they are KH. Can I still use it?
Click to expand...
Click to collapse
Actually, no. Your phone is different to the international SGSII. Get it from Samfirmware.
Mind you it's a 3 package odin flash. You select Code for PDA, Modem for Phone, and CSC for CSC. No repartition, no pit file. Also make sure to select the above files first, THEN connect your phone to the pc, and start the flashing.
achillies400 said:
Can you remember the exact model of your phone, international firmware does not work on certain Chinese devices
Click to expand...
Click to collapse
Is this the one? MODEL: GT-I9100
bryanqjx said:
Is this the one? MODEL: GT-I9100
Click to expand...
Click to collapse
Where did you see that written?
petsasj said:
Where did you see that written?
Click to expand...
Click to collapse
At the battery placement. It has a sticker which shows me the model. Is it the right location, or is it at the box?
bryanqjx said:
At the battery placement. It has a sticker which shows me the model. Is it the right location, or is it at the box?
Click to expand...
Click to collapse
I suppose that's the right place to look at.
I am not certain about this, however. You *should* be able to flash the international software.
Do you remember the version of your old software? was it ZC?
petsasj said:
I suppose that's the right place to look at.
I am not certain about this, however. You *should* be able to flash the international software.
Do you remember the version of your old software? was it ZC?
Click to expand...
Click to collapse
I kind of forgot............ sry so can I still use the samfirmware? Can u provide me the link pls? I can't seem to find it.
bryanqjx said:
I kind of forgot............ sry so can I still use the samfirmware? Can u provide me the link pls? I can't seem to find it.
Click to expand...
Click to collapse
I am not too sure what to suggest. You tried ZCKH2 and failed, is that correct? Odin said passed with green letters etc? Do you want to try that once more, then if it fails again, use an international firmware?
petsasj said:
I am not too sure what to suggest. You tried ZCKH2 and failed, is that correct? Odin said passed with green letters etc? Do you want to try that once more, then if it fails again, use an international firmware?
Click to expand...
Click to collapse
Before it got bricked, Odin showed a fail sign when I started the update. My phone was purchased from singapore by the way.
petsasj said:
I am not too sure what to suggest. You tried ZCKH2 and failed, is that correct? Odin said passed with green letters etc? Do you want to try that once more, then if it fails again, use an international firmware?
Click to expand...
Click to collapse
Still fail! Could it be the cause of my Odin? I am using odin v1.83.
petsasj said:
I am not too sure what to suggest. You tried ZCKH2 and failed, is that correct? Odin said passed with green letters etc? Do you want to try that once more, then if it fails again, use an international firmware?
Click to expand...
Click to collapse
What international firmware should I use? I tried ZCKH2, but still won't work. So what international firmware should I use?
Hi,
ordered it on 09/14 directly from OnePlus and received it today in Germany.
Haven't seen a mention of v2.0.3
Any questions or should I test something?
Someone on Reddit asked me to upload the system folder.
How do I export that folder?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
joshua_07 said:
Hi,
ordered it on 09/14 directly from OnePlus and received it today in Germany.
Haven't seen a mention of v2.0.3
Any questions or should I test something?
Someone on Reddit asked me to upload the system folder.
How do I export that folder?
View attachment 3478335
Click to expand...
Click to collapse
Explaining it here would be quite a lot, so there´s a great guide here: http://forum.xda-developers.com/showthread.php?t=2450045
Let me know if you need some additional help!
If the method above is to comicated you can flash TWRP and make a system backup and upload it here. I can go ahead and make a flashable zip with that. Just backup your system and nothing else (privacy reasons).
Can you check please, is there a russian language?
dbbnzzz said:
Can you check please, is there a russian language?
Click to expand...
Click to collapse
No Russian on mine with 2.0.3
Is there Spanish language? Does anyone know the changes from oxygen OS 2.0.2?
Sent from my ONE A2001 using XDA Free mobile app
You don't even need to flash anything.
Just boot twrp via fastboot and back up the system.
I think there are several people here who'd like to try.
dbbnzzz said:
Can you check please, is there a russian language?
Click to expand...
Click to collapse
I'm not sure. Isn't this Cyrillic script in the screenshot? http://i.imgur.com/EuOJfCV.png
sonny34 said:
Is there Spanish language? Does anyone know the changes from oxygen OS 2.0.2?
Sent from my ONE A2001 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, there's an Español option. http://i.imgur.com/JJr8gVE.png
Jann F said:
You don't even need to flash anything.
Just boot twrp via fastboot and back up the system.
I think there are several people here who'd like to try.
Click to expand...
Click to collapse
Do I need to root the device or open the bootloader to accomplish any of the options?
Would like to keep my device stock as much as possbile.
joshua_07 said:
I'm not sure. Isn't this Cyrillic script in the screenshot?
Click to expand...
Click to collapse
It's Ukrainian language and it was there from 2.0.0. Seems they still ignore Russians.
Anyway, thanks for the reply.
joshua_07 said:
I'm not sure. Isn't this Cyrillic script in the screenshot? http://i.imgur.com/EuOJfCV.png
Yes, there's an Español option. http://i.imgur.com/JJr8gVE.png
Do I need to root the device or open the bootloader to accomplish any of the options?
Would like to keep my device stock as much as possbile.
Click to expand...
Click to collapse
You would need to fastboot oem unlock to unlock the bootloader then use fastboot boot twrp.img(image name for recovery) and then go to backup option and then select system, reboot your phone after and pull the twrp folder form your device.
joshua_07 said:
Hi,
ordered it on 09/14 directly from OnePlus and received it today in Germany.
Haven't seen a mention of v2.0.3
Any questions or should I test something?
Someone on Reddit asked me to upload the system folder.
How do I export that folder?
View attachment 3478335
Click to expand...
Click to collapse
Congrats and welcome to the family [emoji1]
Sent from my ONE A2003 using Tapatalk
joshua_07 said:
Do I need to root the device or open the bootloader to accomplish any of the options?
Would like to keep my device stock as much as possbile.
Click to expand...
Click to collapse
You are from Germany, right? Would it help you if I would go through the steps with you, in German? PM me!
You would need to unlock the bootloader, but not more.
If you boot the recovery only, it will not get installed.
You can then lock it again afterwards.
in Spain people how ordered it from oneplus web site came with 2.0.3 too.....
so, what are they waiting for the OTA?
Anyone managed to upload nandroid yet of 2.0.3?
We need an nandroid of this. Every phone that came with 2.0.3 and is modified makes the home button not work at all.
Lostatsea23 said:
We need an nandroid of this. Every phone that came with 2.0.3 and is modified makes the home button not work at all.
Click to expand...
Click to collapse
My OPT came with 2.0.3 preinstalled. I just made a backup using TWRP before going through the initial setup of the phone. I don't know where people upload such big files to be honest. This is my first post on this forum. Someone from the OnePlus forums told me to check out XDA.
I'll explain it for you just take the nandroid and upload it to google drive I know it's tough but I'd appreciate it so much!
Lostatsea23 said:
I'll explain it for you just take the nandroid and upload it to google drive I know it's tough but I'd appreciate it so much!
Click to expand...
Click to collapse
It's uploading as we speak. The file is 1.15 GB and my upload speed is only about 10Mbit/sec.
Thank you, how long till its done ?
I'm at work so it'll probably be done by the time I'm out but I really appreciate it. We all do.
There's definitely a file that's causing the home button to not work when modifying the system with a new kernel. Or drivers or something of the sort.
Guys i just recieved new update for my G4 international after 6 months ... So far its good and i notice that phone generates less heat .. It is v20g and July patch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same for me
Has anyone tried installing over root and xposed?
I guess I'll try it and report back.
Update: Doesn't work with root.
http://i.imgur.com/prap3EG.png
Same here. Romanian version.
Sent from my LG-H815 using Tapatalk
English screenshot: http://i.imgur.com/boZhseN.png
I am still waiting...
For me nothig yet.
Supertras said:
I am still waiting...
Click to expand...
Click to collapse
You could have always got the official v20d marshmallow that was posted on XDA.
htr5 said:
You could have always got the official v20d marshmallow that was posted on XDA.
Click to expand...
Click to collapse
I know but I didn't had the time and the necessary resources to do it . I was also a Little afraid for the bootloop problem.
Supertras said:
I know but I didn't had the time and the necessary resources to do it . I was also a Little afraid for the bootloop problem.
Click to expand...
Click to collapse
Not sure if you know about it, but your phone is basically showpiece from showrooms or shops, that's the X in your version number. This kind of phones are not intended to be sold for customers.
You will never got more updates as you already have, so your only option is to flash it manually.
Bootloop problem is not dependant on software version. It doesn't matter if you have 5.1 or 6.0.
src151 said:
Not sure if you know about it, but your phone is basically showpiece from showrooms or shops, that's the X in your version number. This kind of phones are not intended to be sold for customers.
You will never got more updates as you already have, so your only option is to flash it manually.
Bootloop problem is not dependant on software version. It doesn't matter if you have 5.1 or 6.0.
Click to expand...
Click to collapse
Do you have an accurate source to backup your wild claims?
My EU (UK) H815 v20d-EUR-XX is currently downloading the update.
No need for a manual flash and my device certainly was not a store demo model.
Hello,
My G4 is unlocked and ROOTED and the update is available and in downloading atm.
There are something I should to know about the fact that my smartphone ROOTED evening before applying the update?
Could this affect my G4?
Thank you! =D
Supertras said:
I know but I didn't had the time and the necessary resources to do it . I was also a Little afraid for the bootloop problem.
Click to expand...
Click to collapse
OllieD said:
Do you have an accurate source to backup your wild claims?
My EU (UK) H815 v20d-EUR-XX is currently downloading the update.
No need for a manual flash and my device certainly was not a store demo model.
Click to expand...
Click to collapse
Sure,
We are not talking about the same thing.
Look again, and maybe twice at his version number: It's is VX10c-EUR-XX
I'm not talking about XX, but about the first "X"... see?
Sure, your device is the same as mine v20d-EUR-XX which is a retail model, but this is not the case for VX10C-EUR-XX which is unfortunately a demo model
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Sylar37 said:
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Click to expand...
Click to collapse
Off you can't. You have another recovery. Use LG UP and flash it. Easier can't be. Note you will lose root and the recovery.
Riardon said:
Off you can't. You have another recovery. Use LG UP and flash it. Easier can't be. Note you will lose root and the recovery.
Click to expand...
Click to collapse
OK but where can I drop the .kdz file?
I searched on http://devtester.ro/projects/lg-firmwares/country.php?country=France#
But even if the last update is was today I can't find the firmware h81520(x_00)... =/
Thank you for your help. =)
OllieD said:
Do you have an accurate source to backup your wild claims?
My EU (UK) H815 v20d-EUR-XX is currently downloading the update.
No need for a manual flash and my device certainly was not a store demo model.
Click to expand...
Click to collapse
Me too same model. I don't know what they're talking about. Store models can't even make calls and this deters people from trying to steal them.
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
Sylar37 said:
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Click to expand...
Click to collapse
Same. Luckily, they seem to have deleted the update so you need to redownload. At least we don't have 500MB lurking somewhere.
Sylar37 said:
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Click to expand...
Click to collapse
Sylar37 said:
OK but where can I drop the .kdz file?
I searched on http://devtester.ro/projects/lg-firmwares/country.php?country=France#
But even if the last update is was today I can't find the firmware h81520(x_00)... =/
Thank you for your help. =)
Click to expand...
Click to collapse
Go to thread about the Portugal update and download the KDZ from there. Any link from that thread is the international H815 update. Don't worry about countries and shenanigans is the same firmware for all. V20g-EUR-XX. Install LG UP on your PC. First the DLL then the program. Place the KDZ in your LG UP install directory (Crogram Files (x86)/LG Electronics/LGUP/model/8994). Put your phone in download mode. (With phone turned off press Volume UP and with it press plug in the USB cable). Click refurbished option for a complete wipe and clean flash. Before all this make a backup. You can also select upgrade option to avoid wipe but I always recommend a clean flash. Read the according threads in XDA for further information if you need.
It seems the h818p will not be updated(yet)?
@src151 thanks for the info. I didn't knew that demo phones can have the GSM module. At least I got it at a very good price
I will upgrade manually then.
Just waiting for the download to be available. See screenshot from OP6T forum at OnePlus. It's about time!
WARNING : DO NOT USE THIS IF YOU HAVE A T-MOBILE VERSION CONVERTED TO THE INTERNATIONAL VERSION! IT WILL NOT WORK!! YOU WILL END UP WITH A BRICKED PHONE!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A6013 using Tapatalk
Link to this thread?
yot2703 said:
Link to this thread?
Click to expand...
Click to collapse
https://forums.oneplus.com/threads/...a-1-for-the-oneplus-6-and-oneplus-6t.1120323/
Sent from my ONEPLUS A6013 using Tapatalk
xRogerxC said:
Just waiting for the download to be available. See screenshot from OP6T forum at OnePlus. It's about time! View attachment 4848905
Sent from my ONEPLUS A6013 using Tapatalk
Click to expand...
Click to collapse
I used the oxygen updater app from google play to install it. EDIT soft bricked don't use it.
When will the notification of the update arrive, to install it I have to follow a particular procedure or can I install it as the previous updates simply giving the ok?
I went from the global stable to this and now my phone is bricked, it won't boot just says "build version and hw version is not match". I have a T-Mobile OP6T that was flashed to the global stable version.
oakami said:
I went from the global stable to this and now my phone is bricked, it won't boot just says "build version and hw version is not match". I have a T-Mobile OP6T that was flashed to the global stable version.
Click to expand...
Click to collapse
The link posted on a few pages back is not meant for carrier phones like yours that's why it's soft bricked. It is meant for unlocked non carrier OnePlus 6/6T phones. Sorry that happened to you.
I tried to flash the zip from the Oxygen Updater , and it doesn't fit.
ERROR : 7
So, let's wait for OTA/ OnePlus will release ZIP
oakami said:
I went from the global stable to this and now my phone is bricked, it won't boot just says "build version and hw version is not match". I have a T-Mobile OP6T that was flashed to the global stable version.
Click to expand...
Click to collapse
I am in the same boat. I am still trying to get it unbricked. I can't even get into fastboot.
I've got softbricked DON'T USE IT!
Intub8 said:
I am in the same boat. I am still trying to get it unbricked. I can't even get into fastboot.
Click to expand...
Click to collapse
Same here. No fastboot nor recovery
imrock666 said:
Same here. No fastboot nor recovery
Click to expand...
Click to collapse
I am still working on mine. the MSM recovery method should work since the phone shows connected it just sucks android file host says 13 hours to download the firmware.
yot2703 said:
I tried to flash the zip from the Oxygen Updater , and it doesn't fit.
ERROR : 7
So, let's wait for OTA/ OnePlus will release ZIP
Click to expand...
Click to collapse
Intub8 said:
I am in the same boat. I am still trying to get it unbricked. I can't even get into fastboot.
Click to expand...
Click to collapse
imrock666 said:
I've got softbricked DON'T USE IT!
Click to expand...
Click to collapse
As i said "let's wait for OTA/ OnePlus will release ZIP"
yot2703 said:
As i said "let's wait for OTA/ OnePlus will release ZIP"
Click to expand...
Click to collapse
yeah but we are beyond that point. Now I just want my phone to turn on lol. Its not my daily phone I just use it for messing around.
Intub8 said:
yeah but we are beyond that point. Now I just want my phone to turn on lol. Its not my daily phone I just use it for messing around.
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...ol-tool-one-driversunlocktwrpfactory-t3860279
Use this tool to flash stock rom.
yot2703 said:
https://forum.xda-developers.com/on...ol-tool-one-driversunlocktwrpfactory-t3860279
Use this tool to flash stock rom.
Click to expand...
Click to collapse
I have an unlocked converted from tmobile. Can I just flash the international rom using that tool?
Intub8 said:
I have an unlocked converted from tmobile. Can I just flash the international rom using that tool?
Click to expand...
Click to collapse
Not sure, but you can try this after you fix thix
https://forum.xda-developers.com/oneplus-6t/how-to/guide-sim-unlock-t-mobile-version-type-t3915269
Installed it through Oxygen Updater and everything is working except WiFi on my 6T. Factory Reset does NOT help - I tried it ^^
The t-mobile softbrick is being pretty stubborn. There's no fastboot, so I am trying to use the MsmDownloadTool. Unfortunately it is failing to flash for me. I'm getting error "FirehoseReadData Failed, Errno: 31". I get the same error on both the patched 6T_MsmDownloadTool_v4.0.58_OOS_v9.0.11 and on "fajitat_34_O.13_190725_repack".
Looks like this brick will be more difficult to overcome than expected.
Noremacam said:
The t-mobile softbrick is being pretty stubborn. There's no fastboot, so I am trying to use the MsmDownloadTool. Unfortunately it is failing to flash for me. I'm getting error "FirehoseReadData Failed, Errno: 31". I get the same error on both the patched 6T_MsmDownloadTool_v4.0.58_OOS_v9.0.11 and on "fajitat_34_O.13_190725_repack".
Looks like this brick will be more difficult to overcome than expected.
Click to expand...
Click to collapse
Mine just completed and has booted up. I used the one here. https://forum.xda-developers.com/oneplus-6t/how-to/tool-t-mobile-oneplus-6t-msmdownloadtool-t3868916
9.0v2. It took 3 downloads before I got one with a matching md5. Now I just need to reconvert it to the international.
can't do anything
i reboot it go into fastboot
but then what ?? what i do ??
Please help
thanks
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
OhioYJ said:
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
Click to expand...
Click to collapse
i don't know what happen i tried to install rom it was o2 beta
how can i go to the global one where it has everything
i was trying to update it while keeping my root but i did something stupid i rebooted the device before it finishs, so it happened
now i am trying to go back to the global rom stock i can't
thanks a lot
OhioYJ said:
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
Click to expand...
Click to collapse
now my system on
op6t_O2_Beta_33
bulid number : A6013_41_200103
i want to go to the global one where all languages
how can I do it ?
Truly i have no idea what I've done but when I install the new system it shows like this some languages not recognize
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yahaa08 said:
Truly i have no idea what I've done but when I install the new system it shows like this some languages not recognize
Click to expand...
Click to collapse
seems like reserve.img partition is not properly flashed.
do u use fastboot or recovery? i think this problem occur if you using recovery.
if root, you can flash reserve.img in magisk, font will fixed
lockmunk said:
seems like reserve.img partition is not properly flashed.
do u use fastboot or recovery? i think this problem occur if you using recovery.
if root, you can flash reserve.img in magisk, font will fixed
Click to expand...
Click to collapse
the problem is i have no idea what's I am doing :laugh:
now I installed the last 10.3.1 ox
but still no Arabic language
now I am trying to root it again
yahaa08 said:
the problem is i have no idea what's I am doing :laugh:
now I installed the last 10.3.1 ox
but still no Arabic language
now I am trying to root it again
Click to expand...
Click to collapse
i use this file to flash in magisk
https://androidfilehost.com/?fid=1899786940962618515
yahaa08 said:
the problem is i have no idea what's I am doing :laugh:
now I installed the last 10.3.1 ox
but still no Arabic language
now I am trying to root it again
Click to expand...
Click to collapse
Reflash your OOS ROM with 'local update' feature, like if it was a regular ROM update.
It will restore all those partitions needed for language and emji's
Best to do that than flash an .img file found on the net
Use the Man download tool, just read instructions and you'll be fine, worked for me several times. It's in the Guides forum.
Striatum_bdr said:
Reflash your OOS ROM with 'local update' feature, like if it was a regular ROM update.
It will restore all those partitions needed for language and emji's
Best to do that than flash an .img file found on the net
Click to expand...
Click to collapse
pandollar said:
Use the Man download tool, just read instructions and you'll be fine, worked for me several times. It's in the Guides forum.
Click to expand...
Click to collapse
thanks a lot, I didn't know that Android is kinda complicated
the original ROM that comes with the phone where can I download it? ( i looked the op site couldn't find it ) because I've download one it was for O2 UK
I don't understand yet, maybe i am more an IOS guy.
I want to format it and restore to the original rom came with the device.
Like I said, use Msm download tool. It will install global ROM and also format to new, and after that you can update.
pandollar said:
Like I said, use Msm download tool. It will install global ROM and also format to new, and after that you can update.
Click to expand...
Click to collapse
could you please provide the link so i can download it?
i couldn't find the tool it refers me to Microsoft tool.
thanks a lot
Here you go
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
pandollar said:
Here you go
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Click to expand...
Click to collapse
thanks a lot but i think the link is something wrong with it
the 1st one too long on searching
Download
6T_MsmDownloadTool_v4.0.59_OOS_v9.0.13.rar
for the OnePlus OnePlus 6T, by iaTa
Standby...
Searching for mirrors...
the drive
Download
QUD.WIN.1.1 Installer-10037.3 Setup.zip
for the OnePlus OnePlus 6T, by Dark Nightmare
OOPS!
no mirrors found.
Sorry, not sure what you mean. Just download the 1st zip file, works fine just tried it.
pandollar said:
Sorry, not sure what you mean. Just download the 1st zip file, works fine just tried it.
Click to expand...
Click to collapse
i meant the links are down deleted i guess :good:
Downloads fine for me, not sure what your problem is.
pandollar said:
Downloads fine for me, not sure what your problem is.
Click to expand...
Click to collapse
Really !when i saw you'r comment i've tried and it's working :fingers-crossed::good:
before i think the links were down or something wrong with it.
thanks i've download the 1st one
and the driver
so i just connect it and run it ? simple as that ?