Related
Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH
any ideas
or
ROM it should try
roo7_shmali said:
Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH
Click to expand...
Click to collapse
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)
naimrlet said:
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)
Click to expand...
Click to collapse
it worked till last second gives me Fail
look at attach file
roo7_shmali said:
it worked till last second gives me Fail
look at attach file
Click to expand...
Click to collapse
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)
^^
Before i read your reply i unzip the file and delete Hidden file and i repack to tar file with 7zip
and start with odin and it Give me pass
but when reboot still stuck on logo
after that i tried your way
give me pass but still stuck on logo
naimrlet said:
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)
Click to expand...
Click to collapse
any new ideas plz
roo7_shmali said:
any new ideas plz
Click to expand...
Click to collapse
Try using smart switch/kies and then go to "firmware initialization..." and restore your phone there
If not detect click the "reinstall driver" and reconnect your device.
If still not detect maybe you mess up something on your phone...
Still not working?
Please help me. I'm looking for huawei y5 ii cun-u29 scatter file. I can't flash it's firmware via flashtool without scatter file. I can't even create scatter file because my phone is dead and not powering on. This happens when i accidentally flashed huawei y5 ii cun-lo2 cwm recovery file but turns out a mess. My phone didn't open at all :crying:. Thank you in advance
UP
please any procedure to root LeEco Le S3 X626 Mediatek Helio X20
I searched all the internet and no have nothing for this model :crying:
i found a recovery in chinese forum:
https://drive.google.com/file/d/0B-bGnOZGjvTyclpBb0x3U29RTGM/view
1 - enable the developer settings
2 - adb reboot bootloader
rename recovery file in twrp.img
3 - fastboot flash recovery twrp.img
Power off your device - press hold button
Don't let it boot into stock-ROM and Press power on and "Vol +" to boot into recovery.
Now you view a chinese recovery (press buttons - there is a language select)
Install supersu.zip from recovery (find from the web)
reboot and accept to allow disable replace stock recovery
Done.....rooted!
I tried to install aosp rom and works fine!
here can find a tutorial
http://www.leeco.re/topic/2343-romx620aosp808mb11-nov-2017unofficial/
Anyone knows to upgrade with Android 7 ?
@dedalo83, you wouldn't happen to have the S3 original wallpapers and sounds would you? I'm trying to find. Thanks.
Root
dedalo83 said:
please any procedure to root LeEco Le S3 X626 Mediatek Helio X20
I searched all the internet and no have nothing for this model :crying:
Click to expand...
Click to collapse
Look in needrom
Look in leeco.re
leeco.re is not up anymore
meron po step by step ang hirap sundan.
LeEco Le S3 X626 Helio X20 64GB
After 1000 download and flashing fake rom my devices is dead , then i find a metod to unbrick it and i will now help you to solve that problem quiqly.
Donwload unbrick rom for the devices and unbrick flashtoll . goo to flash toll and check : from secure boot DA_PL_HIGH.bin
C:\Users\Ripley\Desktop\letv x 626\x620_flash_tool_androidbrick\secureboot\DA_PL_HIGH.bin
Then load chatter file from unbrick Rom
Then try strg alt and s and check auth file
Then check download only and uncheck recovery , try download and put the phone off on USB to flash the rom
After that check strg alt and v and go to window write memory : check the file: recovery_stock_works _after_brick and post it
to file path , then Change the beginn adress with : 0x08000. then check download and put the phone off to usb to flash .
After that reboot the phone and wait after it is finish .
Then look for a right rom for your devices and put it on phone internal storage . after that reboot the phone on recovery and install your new rom from recovery . the rom you downloaded rename only with update no update.zip!!!! so if you have a right rom installation come automatic !
Hello, I recently attempted to root my Galaxy S8, not realizing that revisions of the bootloader above 2 didn't work, and wiped my NAND. Now I'm stuck with an unusuable recovery mode and Download Mode. I believe I need a correct PIT file to fix it, the only details I can seem to find about my phone is the string labelled DID in the Download Mode, which is 205E15A43B84. Any help?
This is How you can Flash a hard bricked Realme X2 Pro
Make sure you have efs or qcn backup from same phone..you may loss imei if doing full flash
Download this program https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Run ROM2box.exe
Go to Oppo tab select Realme X2 Pro
under device type select ufs
locate extracted ofp folder under firmware flasher
Connect Phone in EDL Mod, once Port detected Click Download button, wait until success, it will take around 10Min..
Your browser is not able to display this video.
mark332 said:
This is How you can Flash a hard bricked Realme X2 Pro
Download this program https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Run ROM2box.exe
Go to Oppo tab select Realme X2 Pro
under device type select ufs
locate extracted ofp folder under firmware flasher
Connect Phone in EDL Mod, once Port detected Click Download button, wait until success, it will take around 10Min..
View attachment 5709075
Click to expand...
Click to collapse
Hello, thanks a lot for this, could you send the link to the ROM that you are using here ? Thanks in advance !!
Does ROM2box.exe need .img files from system, vendor, etc, or are .dat files ok?
mark332 said:
This is How you can Flash a hard bricked Realme X2 Pro
Download this program https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Run ROM2box.exe
Go to Oppo tab select Realme X2 Pro
under device type select ufs
locate extracted ofp folder under firmware flasher
Connect Phone in EDL Mod, once Port detected Click Download button, wait until success, it will take around 10Min..
View attachment 5709075
Click to expand...
Click to collapse
My X2 Pro dead after flashing failed in middle with this tool. Went to service centre, they flashed the firmware but lost IMIE and Baseband. Not able to recover till now
rkmadotra said:
My X2 Pro dead after flashing failed in middle with this tool. Went to service centre, they flashed the firmware but lost IMIE and Baseband. Not able to recover till now
Click to expand...
Click to collapse
Restore QCN or twrp backup, you can flash twrp on locked bootloader too, make sure back from same phone.. if flashing failed in middle check the error, it's a issue because of the file 'oppo' is missing in firmware you have to remove the correct line from rawprogram then you can reflash it..
mark332 said:
Restore QCN or twrp backup, you can flash twrp on locked bootloader too, make sure back from same phone.. if flashing failed in middle check the error, it's a issue because of the file 'oppo' is missing in firmware you have to remove the correct line from rawprogram then you can reflash it..
Click to expand...
Click to collapse
There was error sending patches to the device, comport not found something like that.
I restored twrp backup but nothing changed and QCN file i couldn't find anywhere. Can you please provide me that.
hi guys i need link efs or qcn backup for realme x2 pro Chinese version and my phone on latest update
what should i select under xml
Too bad this doesn't work, it has problems with ports.