Hello, I recently attempted to root my Galaxy S8, not realizing that revisions of the bootloader above 2 didn't work, and wiped my NAND. Now I'm stuck with an unusuable recovery mode and Download Mode. I believe I need a correct PIT file to fix it, the only details I can seem to find about my phone is the string labelled DID in the Download Mode, which is 205E15A43B84. Any help?
Related
I was trying to install an Official Stock Samsung Galaxy S4 GT-I9505 firmware, from SAMMOBILE Link for the firmware I tried to use: http://www.sammobile.com/firmwares/3/?download=26516. So while flashing it with ODIN, I think it just randomly disconnected, but that just bricked my phone. I don't know whether it is a soft brick or a hard brick, but this is what happens to my phone, every time I turn on my phone whether it's done normally, the download mode or recovery mode method I will be stuck on that screen.
So now I typed in the error on Google to see how it can be fixed. Link to the method to fix the error: http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
Firstly, my computer (running Windows 7 ULTIMATE 64-BIT) can detect my phone, saying the drivers have been installed successfully. However KIES doesn't detect mine. Anyways I still try to do this method where I have to go to Tools -> Firmware Upgrade and Initialization on KIES. I type in my model name: GT-I9505, that works, now I have to do my S/N or Serial Number: RF1DXXXXXXX, so when I press OK it says GT-I9505 doesn't support 'Intialising', so I am stuck have no idea what to do.
Also, while flashing I tried repartition my S4, to remove all of the stuff I had, none important, except my music which I transferred to my PC. Solved, just flashed Official firmware, it now works.
Just separately repartitioned my S4, it works but S4 is now stuck on boot loop, so have to flash a 4.4.2 Official Firmware.
Harnessful said:
I was trying to install an Official Stock Samsung Galaxy S4 GT-I9505 firmware, from SAMMOBILE Link for the firmware I tried to use: http://www.sammobile.com/firmwares/3/?download=26516. So while flashing it with ODIN, I think it just randomly disconnected, but that just bricked my phone. I don't know whether it is a soft brick or a hard brick, but this is what happens to my phone, every time I turn on my phone whether it's done normally, the download mode or recovery mode method I will be stuck on that screen.
So now I typed in the error on Google to see how it can be fixed. Link to the method to fix the error: http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
Firstly, my computer (running Windows 7 ULTIMATE 64-BIT) can detect my phone, saying the drivers have been installed successfully. However KIES doesn't detect mine. Anyways I still try to do this method where I have to go to Tools -> Firmware Upgrade and Initialization on KIES. I type in my model name: GT-I9505, that works, now I have to do my S/N or Serial Number: RF1DXXXXXXX, so when I press OK it says GT-I9505 doesn't support 'Intialising', so I am stuck have no idea what to do.
Also, while flashing I tried repartition my S4, to remove all of the stuff I had, none important, except my music which I transferred to my PC.
Just separately repartitioned my S4, it works but S4 is now stuck on boot loop, so have to flash a 4.4.2 Official Firmware.
Click to expand...
Click to collapse
Hi,
Can you get into recovery?
Can you still see your phone in odin?
If so , disable kies (task manager) and try to flash the firmware again.
Wipe data and cache before and after flashing firmware.
My S5 Verizon 16gb is stuck in boot loop. I have down loaded the tar.md5 but I am using Jodin3 since I don't have a PC. It cannot recognize the PIT file. Is it available to download somewhere on here? I have been unsuccessful in finding it thus far. Any help would be appreciated.
I tried to install lineageOS 16 on my Samsung Galaxy S5 with TWRP but phone stuck on could not do normal boot Odin mode. Then I tried to install stock ROM according to my build number through Odin but it gets failed at Odin and on phone it says secure check fail aboot. My phone build no. Is G900FXXU1CRH1 but on download mode it says it is G900K. Can someone please help me to recover my phone.
Suddenly My phone stopped working. Stuck in samsung logo screen . cannot enter recovery mode. I have only option is to use odin to install software. have downloaded files from sammobile site. Always stuck in initialisation for 30 min and then proceed and fails at re partition operation failed. tried to install twrp . download was halfway and stopped because of FRP Lock ON. How to proceed .. Pls help me..
Remove FRP lock
Download Samsung-combination-firmware (s7 edge ) (your-model-number) flash with odin. Reboot the device. Activate dev settings and reset the device. Reboot to download mode and flash stock Samsung firmware from Sammobile. If it dont work try againe. I remove 2 times FRP lock this way.
Latest SCF= HardReset.info: Galaxy S7 Edge SM-G935F COMBINATION_FA60_G935FXXU5ASD2_CL7964511
https://www.hardreset.info/articles/samsung-combination-firmware/
What is your binary? , you need to flash the combination firmware to get rid of frp lock and then flash a custom recovery or stock rom, you can actually see the binary number on the download mode ( volume down + power + home ) it is indicated with a B in red letters.
I'm also experiencing a similar problem.
My phone is stuck in the Samsung logo and cannot enter recovery, only download mode. It's unrooted and everything stock. The only difference is that I don't have the FRP lock on.
I've been trying to use Odin to restore the firmware, but couldn't do it. The behavior is very similar to what you're experiencing. It takes ~30minutes and then fails to re-partition or says that PIT file wasn't found. I've tried different Odin versions and downloaded different firmware versions.
Tried flashing with the "HOME_CSC" and the regular "CSC".
Also tried using Smart switch or Kies with no success (those don't find the phone in download mode).
Any tips?
Use 7zip to extract the CSC file from the firmware you downloaded from sammobile. After extraction you'll find the PIT file in the folder.
Start Odin 3.14
Go to options tab and enable re-partition and nand erase
Go to pit tab
Click on pit and select the pit file you extracted from the firmware
Now preload the BL, AP, CP and CSC md5 files
Click start and wait
---------- Post added at 02:58 AM ---------- Previous post was at 02:55 AM ----------
And for removing FRP lock the easiest way of doing this is by using a tool named FRP HiJacker by Hagard
hi all my grandson cannot remember his login info for his tablet, so i went and followed the instructions below I got to step 5 and could not get it to download recovery or turn it on.
After flashing the combo file there was a screen said factory binary but it would not load past that so i followed the steps and did a factory recover. the samsung logo came on but again it just went on to the factory binary screen. so i turn it off but would not turn back on. What can I do I have been out of the scene for a bit, I remember with the note 3 and 4 you could use a download jig to force it to download mode. I tried that but nothing happens. Any help would be greatly appriciated.
I have successfully Unlocked my SM-T377W from Rogers Canada on 7.1.1
I have been Struggling for a while to Unlock the FRP from this device and finally done it
Now its unlocked and I can use whatever sim card i want also
Successfully Unlocked FRP of my SM-T377W from Rogers Canada on 7.1.1
I have successfully Unlocked my SM-T377W from Rogers Canada on 7.1.1 I have been Struggling for a while to Unlock the FRP from this device and finally done it Now its unlocked and I can use whatever sim card i want also So I have used these 2...
forum.xda-developers.com
So I have used these 2 files [IT IS IMPORTANT TO USE THE CORRECT COMBINATION AND CORRESPONDING STOCK], maybe you can use the same ones I have used if you do not have a choice
1- Combination "COMBINATION_OYA_FA60_T377WVLU3ARG1"
2- Stock ROM "Firmware SM-T377W T377WVLU3BRG4 [7.1.1]"
So what I have basically done,
1- Turn the device off and put the device in DOWNLOAD MODE
2- Flash the Combination Firmware to your device with Odin
3- When the device restarts and it runs the Combination firmware, turn it off again and put it in "RECOVERY MODE" not download, and in "RECOVERY MODE" do factory reset wipe and click yes then It will restart or maybe shut off
4- Turn it on again normally and it will run the Combination firmware
5- Now Turn it off again and put in "DOWNLOAD MODE" this time
6- From the Stock ROM extract the 3 files (boot, sboot and system) from inside the files of the stock ROM, you will find them inside "AP" and "BL" (cause we have BL, AP, CP, CSC), you need to use 7-zip so you can extract whats inside them
7- Create new file/archive (it will be .tar) using 7-zip with these 3 files (boot, sboot and system)
9- Flash the new file you made .tar (that has the 3 files) in the AP section in Odin.
10- Your done