I download stock rom for micromax a77.
When I lode scatter file it shows PMT has changed etc message. SO I thought scatter file is not right, And I created one with MtkDroid tool and put this file in rom folder. I loaded it with sp flash tool and flashing started. All done well and there was a right tick and process completed.
But after that my phone is not turning on. even power button is not working. nothing happening.
Only think is I can flash rom using sp flash tool.
Please help me to recover it.
hy gays
i realy need your help, my phone wont turn on after flashing odin with modification firmwere. i thing i need debrick img file to revive my phone from SDcard, but i done have debrick file,
pleasseeee,...... some one helm me:crying::crying::crying::crying:
Someone can help me to unbrick my Huawei p8 lite 2017ed model pra-lx1?
during the system update at reboot its stopped at logo Huawei, i tryed to put stock fw (file update.app) in microsd, in folder "dload" but when read the fw write that its impossible to update.....
Or if exist a valid guide
Thanks so much for help.....
Hi guys how are you?Need some help with p8 lite. It is bootlooping, and a red light is blinking. I can´t acess recovery. It is my mothers´phone. i have scatter file and everything to flash with sp flash tool if needed.
Can you guys help? It has stock rom.
I have a similar issue (corrupted fastboot partition) how can I get the scatter file?
Edit: just found it in the MODEMNVM1.img
Also found this guide that might help you:
https://forum.xda-developers.com/showthread.php?t=2730031
dangerouSoul said:
Hi guys how are you?Need some help with p8 lite. It is bootlooping, and a red light is blinking. I can´t acess recovery. It is my mothers´phone. i have scatter file and everything to flash with sp flash tool if needed.
Can you guys help? It has stock rom.
Click to expand...
Click to collapse
Hi! I think this could help you:
- While the phone is turned off, just pres VOL - and conect the phone to the PC directly (don't press power button).
youtube .com/watch?v=UYmDBD7t1iM
It worked for me
This is How you can Flash a hard bricked Realme X2 Pro
Make sure you have efs or qcn backup from same phone..you may loss imei if doing full flash
Download this program https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Run ROM2box.exe
Go to Oppo tab select Realme X2 Pro
under device type select ufs
locate extracted ofp folder under firmware flasher
Connect Phone in EDL Mod, once Port detected Click Download button, wait until success, it will take around 10Min..
Your browser is not able to display this video.
mark332 said:
This is How you can Flash a hard bricked Realme X2 Pro
Download this program https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Run ROM2box.exe
Go to Oppo tab select Realme X2 Pro
under device type select ufs
locate extracted ofp folder under firmware flasher
Connect Phone in EDL Mod, once Port detected Click Download button, wait until success, it will take around 10Min..
View attachment 5709075
Click to expand...
Click to collapse
Hello, thanks a lot for this, could you send the link to the ROM that you are using here ? Thanks in advance !!
Does ROM2box.exe need .img files from system, vendor, etc, or are .dat files ok?
mark332 said:
This is How you can Flash a hard bricked Realme X2 Pro
Download this program https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Run ROM2box.exe
Go to Oppo tab select Realme X2 Pro
under device type select ufs
locate extracted ofp folder under firmware flasher
Connect Phone in EDL Mod, once Port detected Click Download button, wait until success, it will take around 10Min..
View attachment 5709075
Click to expand...
Click to collapse
My X2 Pro dead after flashing failed in middle with this tool. Went to service centre, they flashed the firmware but lost IMIE and Baseband. Not able to recover till now
rkmadotra said:
My X2 Pro dead after flashing failed in middle with this tool. Went to service centre, they flashed the firmware but lost IMIE and Baseband. Not able to recover till now
Click to expand...
Click to collapse
Restore QCN or twrp backup, you can flash twrp on locked bootloader too, make sure back from same phone.. if flashing failed in middle check the error, it's a issue because of the file 'oppo' is missing in firmware you have to remove the correct line from rawprogram then you can reflash it..
mark332 said:
Restore QCN or twrp backup, you can flash twrp on locked bootloader too, make sure back from same phone.. if flashing failed in middle check the error, it's a issue because of the file 'oppo' is missing in firmware you have to remove the correct line from rawprogram then you can reflash it..
Click to expand...
Click to collapse
There was error sending patches to the device, comport not found something like that.
I restored twrp backup but nothing changed and QCN file i couldn't find anywhere. Can you please provide me that.
hi guys i need link efs or qcn backup for realme x2 pro Chinese version and my phone on latest update
what should i select under xml
Too bad this doesn't work, it has problems with ports.