Hi All,
I would like to take modem log with Aquos SHG01, anyone has an idea on either how to access engineering mode to use built-in log tool?
Or maybe a way to make it work with ADB or QXDM?
Thanks!
Related
and again a little topic:
I didn't install all that Branding-Stuff from the eROM, just the things needed, but now I need the GPRS-Settings, in the eROM, they are packed together with some branded-software, so I'd like to type it in manually.
I saw almost all the things I need to type in, but the password was written in *'s.
Can anybody tell me the things I need to run a GPRS-connection to T-Mobile Germany on my MDAc?
again greets, Nemesis
edit: I also recognized that I can't use the IE when I'm connected to the PC via USB. When I install the T-Mobile Software this works. What do I have to do to make it work?
Hello,
I have a HTC Wizard without bootloader. So that device cant not come up. I've searched on the net, m-system give many tool to dump from another then write it again.
But i dont know how to plug DOC into PC? What hardware did you use? How many $ for this? And are there another way to fix that?
THanx for your help
I think this might require jtag.
Not my field
V
i'm thinking the same thing
well, anyone here tried it yet?
pmquan said:
Hello,
I have a HTC Wizard without bootloader. So that device cant not come up. I've searched on the net, m-system give many tool to dump from another then write it again.
But i dont know how to plug DOC into PC? What hardware did you use? How many $ for this? And are there another way to fix that?
THanx for your help
Click to expand...
Click to collapse
VJ is right, you need Jtag programmer to reprogram a IPL/SPL erased DOC, but Jtag can not be connected to DOC directly, so you need to know abut test points to connect Jtag probes to it...
I wonder if HTC has embedded ON-Board DOC programming interface in its devices, because this technique makes DOC reprogramming more easy by connecting some testpoints to initiate on board DOC programming mechanism for onboard mini USB connector...
Hi,
I'm trying to put together a program for sending AT Commands over a serial connection from my PC to the XDA. Unfortunately my XDA doesn't respond to any of the commands, and in fact doesn't seem to be able to see any serial port data at all.
Does anyone know if there are settings I need to change to allow the XDA to be able to receive Serial data?
Thanks,
Simon
sure thing, the ultimate aim is to be able to send a command from a Destop PC to the XDA to get it to send an SMS. The specific method for doing this isn't too important, but atm AT Commands seems to be the most promising method.
Any advice you can give would be much appreciated.
Thanks,
Simon
My school uses Clean Access Agent, so in order to access wifi on my computer I have to download the software and log in each time I would like to connect to the internet. Can I configure my phone to access wi-fi through CAA? Any help would be appreciated greatly!
Does anyone know how to bypass it? I was searching and it seems that If I can convince clean access its a different OS such as linux it may bypass it. Anyone have a solution?
Thanks
I was hoping you could help me with some research.
I'm looking into copying the data of my Herm100 JasJam using the 'rbmc' command in the bootloader (when connected to a PC using mtty). I'm hoping to take the data recovered from the phone and upload it into a Hermes or Windows Mobile 5 emulator.
I was hoping your combined knowledge could answer, specifically:
1. Do you think this senario is possible?
2. What format would you recommend save the file created by the 'rbmc' command?
3. Do you know of a Hermes or WM5 emulator which allows you to upload images?
Any assistance or comments would be greatly appreciated for my research.
Cheers