Database Users

Xposed Framework installation bricked Mediapad M3

hello everybody,
I bought the Huawei Mediapad M3, I unlock it’s boot loader and installing a new custom Recovery (Greatslon mod) and then flash SU, so the tablet has been correctly routed and everything worked perfectly.
Hounever I think: if you routed your device without install Xposed Framework , you don’t have many many important functions.
Later, I wanted to also install Xposed Framework, I followed the instructions for Marshmallow 6.0 provided by rovo89
but unfortunately when I reboot my M3 it going boot loops, I restored the system with the prior backup
and tried again with apk Xposed , but still the same boot loops, maybe there is something wrong in that Xposed.
Is there anyone who has found a solution to install Xposed Framerwork on Mediapad M3.

when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader

trd_jzx100 said:
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
Click to expand...
Click to collapse
I think it is not important how one rooted marshmallow if after everything works fine, but also i used
xposed v87 from there, and the result is boot loops, maybe it work well on other devices while on huawei mediapad m3 is not good

what I am trying to say is use the systemless xposed and it will work.

trd_jzx100 said:
what I am trying to say is use the systemless xposed and it will work.
Click to expand...
Click to collapse
thanks for your help, i will first try installing the Magisk interface, in order to install systemless Xposed with Magisk, and then i'll write the result

i flash Magisk , reboot the device, then i installed MagicManager.apk so i use MagicManager.apk to download and install automatically the right version of systemless Xposed framework, but when the device does the boot loader goes into the boot loop, i do not know what to do yet to run the xposed framework on my mediapad m3, i went crazy i never had trouble with various smartphones, i never had a tablet, damn the day i bought it, now i reset it to factory, and then i would like to make a final test before breaking it, do you can kindly list the various steps in the details you've been following, thank you in advance

well I am not sure then why your getting boot loops. so you have installedmagiskv12-then,magisk,manager and then go to module and flash the downloaded v87 framework there
link for v87 systemless frameworkhere
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268.
then after that install this it should be working but dont update to v87.1 or your fingerprint sensor might play up
link for the xposed apk
https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758

thanks trd_jzx100,
at this time i brought my tablet back to the factory, before starting a new rooting procedure + installing xposed i would still have two questions:
1) after you made the unlock, which TWRP you installed to flash magisk?
2) i see from the link you posted that the xposed file you used is xposed-v87.0-sdk23-topjohnwu.zip instead i used xposed-v87-sdk23-arm64.zip maybe that was also a problem
later if all goes well, i will write the synthesis of the entire step-by-step procedure for the benefit of all mediapad m3 owners who want to do the same thing with no problems

finally xposed works, i used the system less rooting and then installed xposed v87 by topjohnwu,
now i have a issue with the xprivacy module but this is another story

trd_jzx100 said:
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
Click to expand...
Click to collapse
Did you re-install when you got Nougat??? If so, can you help me out?

Can't get magisk modules installed on any B05 system.

Hi! so i have an issue, i cannot get any magisk modules installed on the latest B05 Rom. i've tried on both the official system from ZTE aswell as community made roms based on B05. I have also tried like 5 different magisk modules non of which want to be installed. What could the issue be and how can i fix it?

senny22 said:
Hi! so i have an issue, i cannot get any magisk modules installed on the latest B05 Rom. i've tried on both the official system from ZTE aswell as community made roms based on B05. I have also tried like 5 different magisk modules non of which want to be installed. What could the issue be and how can i fix it?
Click to expand...
Click to collapse
If you have an early version of Magisk 13.3 that can be the problem. The Magisk Manager that shipped with 13.3 initially was flawed so that it would fail to install modules, or so I read.
But it has happened to me that it just failed to install any module out of the blue, with version 12.0. If that's the case a full system reinstall seems the only way to fix it. you might as well want to use the magisk uninstaller and then install it again, but I don't think that would fix it.

Passing Safety Net

Hi All,
I have been running Lineage OS since it became available for OnePlus 5 with the Safety Net successfully being passed using Magisk and using firmware and modems from jamal2367.
That was up until Lineage required an updated firmware/modem to 5.1.4 and I found jamal2367 has stopped doing the firmware and modem for the OnePlus 5. I installed the firmware from shadowstep the new firmware provider and now I fail the safety net checks.
I have tired the following:
Flashing multiple weekly releases of Lineage OS
Flashing new version of TWRP
Flashing new version of TWRP blu_spark
Flashing new version of TWRP codeworkx
Flashing the ElementalX-OP5-3.10.zip
Flashing Boeffla-Kernel-2.0
Flashing blu_spark_r132
Flashing OSS 5.1.4
Flashing OSS 5.1.5
all with Magisk 17.1 installed
All with full wipes including the sdcard
The only thing that worked was installing OSS 5.1.5 with and relocking the bootloader.
Does anybody know what I have missed and how I can get the Safety Net to pass the ctsProfile.
Thanks in advance.

alrighte_then said:
Does anybody know what I have missed and how I can get the Safety Net to pass the ctsProfile.
Thanks in advance.
Click to expand...
Click to collapse
Relocking the Bootloader will of course work but you didn't need to do that.
What you missed:
That version of Magisk is clearly not working well with your setup and not hiding your Bootloader state properly. (Providing you set it up correctly).
Had you done all those steps without Magisk it would have passed. The custom Kernels alone would have gotten you a Pass due to them ignoring the Verified Boot state.
So, LOS+Kernel = Pass. If you need Magisk, try to find a version that is working properly with your setup. With Magisk working properly the custom Kernel is then optional.
Also, TWRP has nothing to do with it. Just use the latest Codeworkx.

Hi Dirk,
Thanks for your response, I have just tied to install it in the order you suggested
I install TWRP (twrp-3.2.3-0-20180822-codeworkx-cheeseburger.img)
I wiped everything including sdcard
I installed Element Kernel (ElementalX-OP5-3.10.zip)
I installed Lineage OS (lineage-15.1-20180903-nightly-cheeseburger-signed.zip)
I installed Gapps (MindTheGapps-8.1.0-arm64-20180808_153856.zip)
I installed a safety net tester called safetyNet 'attest'
When I run the safetynet test I am still getting CTS profile match: false.
Any ideas what I can do next to make this work?
Thanks for any help

alrighte_then said:
Hi Dirk,
Thanks for your response, I have just tied to install it in the order you suggested
I install TWRP (twrp-3.2.3-0-20180822-codeworkx-cheeseburger.img)
I wiped everything including sdcard
I installed Element Kernel (ElementalX-OP5-3.10.zip)
I installed Lineage OS (lineage-15.1-20180903-nightly-cheeseburger-signed.zip)
I installed Gapps (MindTheGapps-8.1.0-arm64-20180808_153856.zip)
I installed a safety net tester called safetyNet 'attest'
When I run the safetynet test I am still getting CTS profile match: false.
Any ideas what I can do next to make this work?
Thanks for any help
Click to expand...
Click to collapse
You flashed the Kernel before the ROM, so you overwrote that Kernel with the LOS one. Flash LOS then the custom Kernel.
On Magisk.. i've seen many people complain that they can't get the latest version to pass Safetynet. Again, it could just be people not configuring it correctly, or it might be better to try the previous version. Just to make sure you should tell us what you do to set it up.
You need to Hide Play Store, Banking Apps etc, and Magisk Manager too i believe. If you install Magisk and set it up when your current state is 'Uncertified', you will need to clear Data/Cache on Play Store for it to change to 'Certified'.
Also, don't rely on 'Safetynet Checker' apps. If the Play Store settings say 'Certified' try an app like Google Pay. It should work fine.

If you get cts profile mismatch. Download CTS props config from magisk modules and you will pass
Download magisk 17.1

Hi All,
Just to give you an update one where I got to with this.....
You where right the newer builds of Lineage OS do not pass safety net but the older ones do.
So after much playing around I and many flashes and wipes I found it impossible to boot a Lineage with a custom kernel, I believe this is probably down to the forced encryption.
The thing that worked for me in the end was installing "MagiskHide Props Config" and changing the figure print, I am it is very similar to the module Jamie suggested.
So I now have Lineage OS working fully with root, magisk and passing SafetyNet
Thanks everyone for you help.

The thing that worked for me in the end was installing "MagiskHide Props Config" and changing the figure print, I am it is very similar to the module Jamie suggested.
So I now have Lineage OS working fully with root, magisk and passing SafetyNet
Thanks everyone for you help.[/QUOTE]
Hello; can you explain to me in detail, step by step, how to do it? Thanks in advance.
" changing the figure print"

Magisk + Viper4droid

Hi guys!
First of all, please do not send me to somwhere on forum because I have tried dozen of ways do deal with problem. My phone is LG G6 running on android pie. TWRP installed, Magisk installed. Im trying to instal viper4droid. I have tried download module from Magisk itself, I have tried to download .apk file from different sources, I have tried to download .zip file, I have tried to installed as apk itself and grant root accesss, tried by TWRP, tried unify installers and **** knows what else. Trouble is, First few times it was installed but status was "not running", Today after many attempts to deal with that viper4droid installing drivers and.......after each reboot its doing it again. Moreover i have found that sometimes Magisk did not show up the newest version of v4a as a module to download. So......is somebody for the love of god know what the **** is wrong? thank you.

marcin3595p said:
Hi guys!
First of all, please do not send me to somwhere on forum because I have tried dozen of ways do deal with problem. My phone is LG G6 running on android pie. TWRP installed, Magisk installed. Im trying to instal viper4droid. I have tried download module from Magisk itself, I have tried to download .apk file from different sources, I have tried to download .zip file, I have tried to installed as apk itself and grant root accesss, tried by TWRP, tried unify installers and **** knows what else. Trouble is, First few times it was installed but status was "not running", Today after many attempts to deal with that viper4droid installing drivers and.......after each reboot its doing it again. Moreover i have found that sometimes Magisk did not show up the newest version of v4a as a module to download. So......is somebody for the love of god know what the **** is wrong? thank you.
Click to expand...
Click to collapse
Hi man, there are three versions of viper4ndroid on magisk, try the viper4android fx legacy materialized as normal app after disabling play protect on google playstore. hope this helps

I will try that in a minute mate.

didnt work.

I have the same problem. I switched to viper hifi and now after reboot it is working but after some time it stops till i reboot it again. I think it is because of the pie version, on oreo everything works fine. After every reboot every mofule in magisk reinstalls. For example youtube vanced instals like new and i have to set it up after the reboot.

IIRC it required me to install viperfx (the new version, not legacy or xhifi), audio modification library and audio compatibility patch, have you done that?

I have tried all three version of viper. I have isntalled it as a apk and modules in Magisk. All possible audio patches and compatibilies mods from magisk are intalled as well.

marcin3595p said:
I have tried all three version of viper. I have isntalled it as a apk and modules in Magisk. All possible audio patches and compatibilies mods from magisk are intalled as well.
Click to expand...
Click to collapse
if you still have this problem, try installing viper4android 2.7 as apk from xda lab, I was downgrading back to pie sometimes ago and couldn't get viper to work, besides the 2.7

EdXposed on SAMSUNG Galaxy S10+ (SM-G975F)

Hello to the forum!
I'd like to run EdXposed on my SAMSUNG Galaxy S10+ (SM-G975F) with Android 10, for example to use XPrivacyLua. The Installation of all necessary components was no problem, but EdXposed Manager doesn't recognize the installed framework.
Before any question arises why I didn't use the official versions of some Magisk components: The official Magisk 20.1 doesn't support the SE policy needs of the EdXposed framework yet when used with Android 10, the official EdXposed Magisk modules don't support Android 10 yet, and the EdXposed Manager 4.5.2 fixes some SE policy issues.
My configuration is as follows:
Hardware:
SAMSUNG Galaxy S10+ (SM-G975F) with 512 GByte internal memory (EXYNOS)
512 GByte SD-card​Firmware:
G975FXXU3BSKO (DBT; Android 10)​Root and modifications:
Magisk 20.1 (version 20101, customized by solohsu due to SE policy issues)
Magisk Manager 7.4
SAMSUNG MultiDisabler 2.2 with Bluetooth fix
Riru - Core 19.5
Magisk EdXposed module 0.4.6 beta build 4471 (these version support Android 10; I tried both YAHFA and SandHook)
EdXposed Manager 4.5.2​Customized recovery:
NONE​
This is what I did to install all components (developer mode enabled):
Installed Magisk Manager 7.4
Copied the firmware AP_G975FXXU3BSKO_CL17369399_QB27539832_REV01.tar to the phone via ADB
Patched the firmware via Magisk Manager 7.4 with the official Magisk 20.1
Copied the modified firmware back to the computer via ADB
Booted my SAMSUNG Galaxy S10+ into download mode
Flashed the modified firmware together with the corresponding BL-, CP- and HOME-CSC-files via ODIN 3.13
Booted into recovery mode
Did a wipe/factory reset
Booted into patched system
Installed "FK Kernel Manager" (for flashing purposes)
Flashed MultiDisabler 2.2 with Bluetooth fix
Changed update channel of Magisk to "https://raw.githubusercontent.com/solohsu/magisk_files/master/custom_builds/release.json"
Confirmed and installed an Magisk update (the above mentioned solohsu patched version 20101)
Rebooted my phone
Installed Riru - Core 19.5 via Magisk Manager download
Installed Magisk EdXposed module 0.4.6 beta build 4471-zip file via Magisk Manager module
Rebooted my phone
Installed EdXpoed Manager 4.5.2​
I hoped that the framework was installed properly, but when I opened the EdXposed Manager, it told me that the "EdXposed Framework is not installed".
Is there someone who has/had the same problem and maybe solved it?
Regards from Germany
Edit:
After availibility of the new official Magisk 20.2 version I first updated my Magisk Manager to the new version 7.5 and then updated to Magisk 20.2 version after changing to the "stable" update channel. The rest of the necessary software I left untouched.
BUT I FAILED AGAIN! What's goin' wrong here?

I couldn't get EdXposed manager to work either, so now I use EdXposed installer 2.2.4 instead and everything's tickety-boo

Hi beanbean50,
I tried EdXposed Manager 2.2.4 instead of EdXposed Manager 4.5.2, but the result is still the same The EdXposed framework is not recognized...
Can you please tell me which environment you use:
Are you on Android 10?
Did you install the official Magisk 20.1 release?
Did you install "Riru - Core" and "Riru - EdXposed" modules from the official Magisk repositories?
Regards from Germany
klausstoertebeker

sorry, I've just remembered what I did that was slightly different (I was in the same boat as you a couple of weeks ago)
I ended up flashing magisk-EdXposed-YAHFA-v0.4.5.5_beta-release which can be found here: https://github.com/ElderDrivers/EdXposed/pull/354
Edit:
everything else is the same as you, S10+ Android 10, Magisk 20.1 etc

Hi beanbean50,
I tried your solution but failed again and I don't know why...
But thanks for help

Hello everybody.
Here's a friendly reminder to keep things on topic. If you've got a query, try to find the correct forum and threads that are relevant to your question. If you can't find a relevant thread, post a new one to keep existing threads on topic and free of clutter (and make sure you're in the right forum when posting).
Please also make sure that you're familiar with the forum rules before posting anything.
Have a good morning/day/afternoon/evening/night.
Cheers
Didgeridoohan
Forum Moderator

I finally got EdXposed to work in my configuration and the solution was VERY simple:
Magisk started in core only mode which I didn't notice - but it is mentioned on the home screen of Magisk Manager. So the modules were not loaded...
After changing the setting in the preferences the modules load and EdXposed was shown as "activated" in EdXposed Manager.
So this problem belongs to the "lesen und verstehen!" ("read and understand!") category....

Hi guys.Id like to install EdXposed on my S10 +Exynos(rooted by Magisk).I currently use last stock fw patch december.
Would it be possible to install it?
Could you please tell me the steps to install it?Tnx in advance