hello everybody,
I bought the Huawei Mediapad M3, I unlock it’s boot loader and installing a new custom Recovery (Greatslon mod) and then flash SU, so the tablet has been correctly routed and everything worked perfectly.
Hounever I think: if you routed your device without install Xposed Framework , you don’t have many many important functions.
Later, I wanted to also install Xposed Framework, I followed the instructions for Marshmallow 6.0 provided by rovo89
but unfortunately when I reboot my M3 it going boot loops, I restored the system with the prior backup
and tried again with apk Xposed , but still the same boot loops, maybe there is something wrong in that Xposed.
Is there anyone who has found a solution to install Xposed Framerwork on Mediapad M3.
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
trd_jzx100 said:
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
Click to expand...
Click to collapse
I think it is not important how one rooted marshmallow if after everything works fine, but also i used
xposed v87 from there, and the result is boot loops, maybe it work well on other devices while on huawei mediapad m3 is not good
what I am trying to say is use the systemless xposed and it will work.
trd_jzx100 said:
what I am trying to say is use the systemless xposed and it will work.
Click to expand...
Click to collapse
thanks for your help, i will first try installing the Magisk interface, in order to install systemless Xposed with Magisk, and then i'll write the result
i flash Magisk , reboot the device, then i installed MagicManager.apk so i use MagicManager.apk to download and install automatically the right version of systemless Xposed framework, but when the device does the boot loader goes into the boot loop, i do not know what to do yet to run the xposed framework on my mediapad m3, i went crazy i never had trouble with various smartphones, i never had a tablet, damn the day i bought it, now i reset it to factory, and then i would like to make a final test before breaking it, do you can kindly list the various steps in the details you've been following, thank you in advance
well I am not sure then why your getting boot loops. so you have installedmagiskv12-then,magisk,manager and then go to module and flash the downloaded v87 framework there
link for v87 systemless frameworkhere
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268.
then after that install this it should be working but dont update to v87.1 or your fingerprint sensor might play up
link for the xposed apk
https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
thanks trd_jzx100,
at this time i brought my tablet back to the factory, before starting a new rooting procedure + installing xposed i would still have two questions:
1) after you made the unlock, which TWRP you installed to flash magisk?
2) i see from the link you posted that the xposed file you used is xposed-v87.0-sdk23-topjohnwu.zip instead i used xposed-v87-sdk23-arm64.zip maybe that was also a problem
later if all goes well, i will write the synthesis of the entire step-by-step procedure for the benefit of all mediapad m3 owners who want to do the same thing with no problems
finally xposed works, i used the system less rooting and then installed xposed v87 by topjohnwu,
now i have a issue with the xprivacy module but this is another story
trd_jzx100 said:
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
Click to expand...
Click to collapse
Did you re-install when you got Nougat??? If so, can you help me out?
Related
Just wanted to confirm that I have installed Magisk and used it to succesfully gain root access and install xposed without any issues whatsoever.
I'm running Aerom so I'm unsure if Android Pay is going to work but regardless, systemless root and xposed confirmed
Update: Aerom has issues with Magisk installation. Any changes to system settings are discarded on reboot. I'm going to see if this issue persists when using the stock rom.
Update 2 Stock rom also has the system settings persistence error. I'll file a bug report to the Magisk devs.
Anybody get Xposed working on Android 7?
jbs4 said:
Anybody get Xposed working on Android 7?
Click to expand...
Click to collapse
There is no xposed for nougat.
Hello,
I am really confused about whatever Moto E4 supports Xposed Framework after all.
I have Mediatek variant. XT1762 (Dual Sim one).
I've successfully unlocked the bootloader, installed TWRP recovery, along with dmverify and rooted the phone (by Magisk). I can edit system partition and the phone boots perfectly.
about systemless xposed:
when I try to install a Magisk module, whenever in recovery or application mode, I get /data/magisk_merge.img mount failed error. I uninstalled Magisk 14.0 complately and then tested with Magisk 14.3. But no luck. I gave up installing Magisk modules because I think the stock kernel have some problems with loop module (altought, I am not sure about that).
_______________
Then, I tried to flash them: API 25 / ARM
(offical one) https://forum.xda-developers.com/showthread.php?t=3034811
(unoffical, seems for Moto E4) https://forum.xda-developers.com/moto-e4/how-to/info-xposed-framework-nougat-t3687263
both give bootloop and USB debugging is getting turned off everytime I reboot the phone therefore I do not have any valueable / debug information. The only way me to get the phone booted again is to flash the uninstaller from the recovery!
_______________
How do you guys install this XPosed framework on this phone? I am so confused!
buraktamturk said:
Hello,
I am really confused about whatever Moto E4 supports Xposed Framework after all.
I have Mediatek variant. XT1762 (Dual Sim one).
I've successfully unlocked the bootloader, installed TWRP recovery, along with dmverify and rooted the phone (by Magisk). I can edit system partition and the phone boots perfectly.
about systemless xposed:
when I try to install a Magisk module, whenever in recovery or application mode, I get /data/magisk_merge.img mount failed error. I uninstalled Magisk 14.0 complately and then tested with Magisk 14.3. But no luck. I gave up installing Magisk modules because I think the stock kernel have some problems with loop module (altought, I am not sure about that).
_______________
Then, I tried to flash them: API 25 / ARM
(offical one) https://forum.xda-developers.com/showthread.php?t=3034811
(unoffical, seems for Moto E4) https://forum.xda-developers.com/moto-e4/how-to/info-xposed-framework-nougat-t3687263
both give bootloop and USB debugging is getting turned off everytime I reboot the phone therefore I do not have any valueable / debug information. The only way me to get the phone booted again is to flash the uninstaller from the recovery!
_______________
How do you guys install this XPosed framework on this phone? I am so confused!
Click to expand...
Click to collapse
The only xposed that worked for me was the official but NOT SYSTEMLESS .zip . I flashed it via recovery . I was using magisk 14.3 . I got the same error in magisk with systemless version . If you get a bootloop try going back to recovery and flashing magisk 14.3 ..reboot to recovery ...flash xposed ..reboot to RECOVERY ..flash no dm-verity ...clear cache & dalvik ..reboot RECOVERY ...reboot system ......
In nougat xposed maaany xposed modules has bugs so just flash a custom rom bro
the modified xposed is not really necessary as the normal version of xposed works too.
---------- Post added at 07:35 AM ---------- Previous post was at 07:30 AM ----------
Before doing this install xposed installar apk BUT THE LATEST ..give it root access in magisk ..go to settings ..disable verify apps via USB ..enable install from unknown sources ...enable USB debug ...all of this in developers settings
Then boot to recovery and do the above and see what happens ..I don't understand how or why your USB debug is being turned off on reboot because it should survive boot and stay in USB debug mode
If you have substratum installed remove it before doing xposed
Oh yes make sure you are using SDK 25 XPOSED ARM none of the others .
KevMetal said:
The only xposed that worked for me was the official but NOT SYSTEMLESS .zip . I flashed it via recovery . I was using magisk 14.3 . I got the same error in magisk with systemless version . If you get a bootloop try going back to recovery and flashing magisk 14.3 ..reboot to recovery ...flash xposed ..reboot to RECOVERY ..flash no dm-verity ...clear cache & dalvik ..reboot RECOVERY ...reboot system ......
In nougat xposed maaany xposed modules has bugs so just flash a custom rom bro
the modified xposed is not really necessary as the normal version of xposed works too.
---------- Post added at 07:35 AM ---------- Previous post was at 07:30 AM ----------
Before doing this install xposed installar apk BUT THE LATEST ..give it root access in magisk ..go to settings ..disable verify apps via USB ..enable install from unknown sources ...enable USB debug ...all of this in developers settings
Then boot to recovery and do the above and see what happens ..I don't understand how or why your USB debug is being turned off on reboot because it should survive boot and stay in USB debug mode
If you have substratum installed remove it before doing xposed
Click to expand...
Click to collapse
Thanks for verification! thought I were late for the additional one, I uninstalled everything and recovered from boot.img backup, installed no dm verify. Booted into the system. Installed xposed installer, rebooted into recovery and flashed xposed, and I am waiting for the result. (no Magisk installed for this time)
but I don't think it is going to work cuz I have tried all of these combinations before :'(
what was your variant? Qualcomm or Mediatek?
buraktamturk said:
Thanks for verification! thought I were late for the additional one, I uninstalled everything and recovered from boot.img backup, installed no dm verify. Booted into the system. Installed xposed installer, rebooted into recovery and flashed xposed, and I am waiting for the result. (no Magisk installed for this time)
but I don't think it is going to work cuz I have tried all of these combinations before :'(
what was your variant? Qualcomm or Mediatek?
Click to expand...
Click to collapse
I have mediatek xt1762 ...make sure you are using XPOSED SDK 25 ARM classic NOT systemless .
KevMetal said:
I have mediatek xt1762 ...make sure you are using XPOSED SDK 25 ARM classic NOT systemless .
Click to expand...
Click to collapse
You're crazy! It worked! I have removed everthing, just TWRP, no dm verify and 88.2 offical arm not systemless zip did the trick!
Don't forget to join us on telegram
We have a lot going on and if we chat via one central chat development , bug fixing and general help happens fast .
https://t.me/joinchat/G3XDFEO7AR4fGdyBRfwVOw
http://telegra.ph/woods-development-01-07
Hello,
I have a Moto E4 XT1762 with the ROM STOCK MOTOROLA_E_NMA26.42-75_ROW (France) and two Xposed module, one: xposed-v89-sdk25-arm64.zip and a: xposed-v89-sdk25-arm.zip much lighter. Alas I remain stuck on the home screen very long at least 1/2 hour before the smarpthone starts. Once in Xposed, I have a message in yellow that tells me that Xposed does not work and you have to go see in the log, but the log is empty.
I have these two files + the uninstall file available if it interests someone. These files come from the site: https://repo.xposed.info/
If anyone can help me make Xposed work, it would be nice. Thank you
Darkmo said:
Hello,
I have a Moto E4 XT1762 with the ROM STOCK MOTOROLA_E_NMA26.42-75_ROW (France) and two Xposed module, one: xposed-v89-sdk25-arm64.zip and a: xposed-v89-sdk25-arm.zip much lighter. Alas I remain stuck on the home screen very long at least 1/2 hour before the smarpthone starts. Once in Xposed, I have a message in yellow that tells me that Xposed does not work and you have to go see in the log, but the log is empty.
I have these two files + the uninstall file available if it interests someone. These files come from the site: https://repo.xposed.info/
If anyone can help me make Xposed work, it would be nice. Thank you
Click to expand...
Click to collapse
Just install the systemless module from inside magisk + systemless xposed apk from link inside module explanation imside magisk & reboot
Or
REMOVE MAGISK & install custom rom and use
"SYSTEM" Supersu version
____in both cases you should be formatting data to EXT4 first
__DOWNLOAD THE CORRECT VERSION OF XPOSED ..your device is NOT 64bit
__download ARM ...
But honestly you could have figured this out if you just read 20% of what is in the moto e4 mtk xt1762 forum and posts
There is one thing I do not understand, I thought the Moto E4 (MT6737) was 64 bits according to a technical sheet that I read ?
Darkmo said:
There is one thing I do not understand, I thought the Moto E4 (MT6737) was 64 bits according to a technical sheet that I read ?
Click to expand...
Click to collapse
Nope. It's chip is capable of 64 bit. But it has no 64 bit software whatsoever.
OK but then for Xposed, you have to take it in ARM64 or not?
Darkmo said:
OK but then for Xposed, you have to take it in ARM64 or not?
Click to expand...
Click to collapse
No. Arm. It has no arm 64 software at all. No drivers, blobs, nothing. Do not consider arm 64 at all for anything on this device.
OK thank you
im new at thisxda stuff but i am 90 percent sure i figured out how to keep magisk from uninstalling after a reboot... YOU MAY NEED TO UNINSTALL MAGISK AND ALL MODULES BEFORE DOING THIS USING MAGISK UNINSTALLER basically you have to also install an older version of supersu and it has to be an aroma installer and install as SYSTEM also make a backup of the boot.img just incase you get bricked if you install the supersu app it will say su binary occupied but install should stay install supersu aroma (2.78v2) from https://forum.xda-developers.com/attachment.php?attachmentid=3879523&d=1474248173 before and possibly after magisk install...only tested with magisk 16.2 beta channel and regular install not patched boot on Axon 7 with RR 8.1 weekly 6.0.0 20180225 (us variant) but should work on others probably...let me know how this goes for you
TRY AT OWN RISK I AM NOT RESPONSIBLE FOR DEVICE BOOTLOOPS OR BRICKS
If anyone has a better way to get magisk to hold after a few restarts please let me know
sidenote:this supersu does work with magisk not installed and definately keeps root
(stock boot.img is in initial zip for custom rom) select intall imgs in twrp and flash the boot partition as needed)
ALSO YOU CAN ALWAYS DIRTY FLASH CUSTOM ROM same build or higher IF ALL GOES TO **** AND WONT LOOSE APPS OR DATA AT LEAST ON RR
works for me without problems after last 2 years on any Rom.
dont know what you doing wrong?!
I cant get to bypass safetynet V: other than that root works fine
J0nhy said:
I cant get to bypass safetynet V: other than that root works fine
Click to expand...
Click to collapse
this actually fixed sn for me without the fix installed
Ever tried magisk v15.3? I never had problems with uninstalling, but everything above 15.3 won't pass safety net,at least for me/on stock nougat b10 rom.
desu1337 said:
Ever tried magisk v15.3? I never had problems with uninstalling, but everything above 15.3 won't pass safety net,at least for me/on stock nougat b10 rom.
Click to expand...
Click to collapse
Maybe on stock roms...it should work on l8r versions tho...
try this already https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
also cant have xposed installed with the sn fix
Ok so I've been having a hell of a time with this phone so far. I have the boost mobile variant (xt1766). I unlocked the bootloader, installed twrp, but forgot to make a backup before flashing supersu, after which my phone would no longer boot so I flashed lineageOS. It booted up fine but I had no 3g connection so I wanted to go back to stock. I downloaded the stock firmware, but couldn't get RSD lite to install on my computer so I extracted all the files and flashed them manually with fastboot. After that my phone wouldnt boot and TWRP couldnt mount the data partition so I couldnt restore my lineage backups. I had to format the data partition in order to restore from backup but now I have nothing on internal storage, and my phone wont boot into system unless I boot into factory mode from the bootloader. It boots up fine in factory mode but now I have no network connection, no service whatsoever.
Under sim status it says Network: unknown, cellular network type: unknown, Service state: Radio Off, etc. I tried manually turning the radio on but that didn't work. I really just want to go back to stock but I don't understand how to accomplish this. I flashed everything in the firmware package in the correct order, and somehow it just rendered my phone useless. any help would be much appreciated. I've tried just about everything and I'm at a loss here.
Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
AMShiech said:
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
Not "lame" unless that's the latest descriptor for a reliable, fully functional, device optimized ROM that just works. If you want additional bling/tweaks flash Xposed framework and a few well regarded modules like GravityBox.
Alternatively, you can cycle through the various custom ROMs and decide which suite of compromises you're willing to live with. Suggest a careful read of the relevant ROM thread before diving in. Be sure to backup what works (including stock!) and store those nandroids on a SD card and/or off-device.
Good luck.
AMShiech said:
Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.
madbat99 said:
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.
Click to expand...
Click to collapse
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
No, regular Xposed. Wipe cache and dalvik, and wait. Let it sit 5 - 10 minutes. It has to optimize everything. Make sure it's the arm build. It works fine, just gotta let it sit. First boot takes a good bit.
Or use magisk, and install Xposed through that.
Do not use that old purity crap. That's why the links are dead. It's old crap. Xposed works fine with no extra steps or messing with selinux.
AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
That's BS; don't overcomplicate things. Xposed framework installs fine in enforcing mode. Make sure you have the correct framework for Android 7.1 (SDK 25) and your hardware (arm). You will also need the corresponding management app. There is no need to wipe anything before/after flashing the framework although doing so can't hurt. First boot will take awhile; patience is a virtue.
Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol
AMShiech said:
Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol
Click to expand...
Click to collapse
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.
madbat99 said:
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.
Also I certainly hope that's not the app I think it is (the smiley face)? You're not allowed to promote or speak of that "warez" here. So screenshot is not a great idea.
Click to expand...
Click to collapse
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. Ive tried installing it with TWRP a couple times with no success. As far as PoGo I've actually never even played that game. Was just curious about it.
And I'm not sure what app you're referring to but that "wow" face is a chrome shortcut. Changed it cuz I didn't like the default grey square.
AMShiech said:
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. As far as PoGo I've actually never even played that game. Was just curious about it.
Click to expand...
Click to collapse
Trend continues; reread post you're disparaging. Or module OP. f2fs loopback 'fix' gets flashed in twrp or via fastboot (for the adventurous).
I edited my post shortly after your quote. Tried installing with TWRP more than once. Doesn't show up in magisk modules.
Just flashed with fastboot and now it seems to have worked. Fastboot for the win.
Maybe all caps will help out
go inside magisk manager> downloads search F2FS LOOPBACK BUG WORKAROUND, FLASH INSIDE TWRP!!! WILL NOT WORK IF ATTEMPTED TO FLASH THROUGH MAGISK MANAGER!!!!
Hello everyone.
Is there anyway to install Xposed on Stock 8.1 Oreo? I already installed it flashing the ZIP and tried with Magisk and it didn't work, results in a bootloop!
Guilhermex12 said:
Hello everyone.
Is there anyway to install Xposed on Stock 8.1 Oreo? I already installed it flashing the ZIP and tried with Magisk and it dind't work, results in a bootloop!
Click to expand...
Click to collapse
Same problem here, bootloop on Stock and Xposed but it work if first install Xposed apk, then install xposed from Magisk, and finally on Xposed menu do a soft reboot , never a normal reboot. When install Xposed modules soft reboot, never turn off or normal reboot. If make mistake and bootloop, first unistall xposed with the unistall zip, then root with Magisk zip, reboot and phone will boot normal.
mquenchmb501 said:
Same problem here, bootloop on Stock and Xposed but it work if first install Xposed apk, then install xposed from Magisk, and finally on Xposed menu do a soft reboot , never a normal reboot. When install Xposed modules soft reboot, never turn off or normal reboot. If make mistake and bootloop, first unistall xposed with the unistall zip, then root with Magisk zip, reboot and phone will boot normal.
Click to expand...
Click to collapse
Thanks for the answer, so, basically you're telling me that if i do a Normal Reboot i am going to get Bootloop and will need to reinstall everything again? Damn, that's sad. I think there's no way except waiting for a real Fix or using an Custom Oreo rom
Guilhermex12 said:
Thanks for the answer, so, basically you're telling me that if i do a Normal Reboot i am going to get Bootloop and will need to reinstall everything again? Damn, that's sad. I think there's no way except waiting for a real Fix or using an Custom Oreo rom
Click to expand...
Click to collapse
Yes is sad but true. Waiting for and update rovo89.
mquenchmb501 said:
Yes is sad but true. Waiting for and update rovo89.
Click to expand...
Click to collapse
Gotcha, thx man
Same issue here, waiting for a word from @topjohnwu and @rovo89
So I've gotta install Xposed Installer and Magisk Manager, install Xposed from Magisk, soft reboot through Xposed Installer and then I can use it normally? Really pissed since I had to sleep at 3am last night because my phone bootlooped and I ended up reflashing latest stock from fastboot.
EDIT: Just saw this is G5 Plus forum, but it should work the same on G5 right?
EDIT2: Soft reboot didn't work, neither did uninstalling xposed and installing magisk. Back to re-flashing my phone...
Hyoretsu said:
So I've gotta install Xposed Installer and Magisk Manager, install Xposed from Magisk, soft reboot through Xposed Installer and then I can use it normally? Really pissed since I had to sleep at 3am last night because my phone bootlooped and I ended up reflashing latest stock from fastboot.
EDIT: Just saw this is G5 Plus forum, but it should work the same on G5 right?
EDIT2: Soft reboot didn't work, neither did uninstalling xposed and installing magisk. Back to re-flashing my phone...
Click to expand...
Click to collapse
I think so.
I'm having this same issue after flashing Xposed ver90 on my Moto G5 Plus running 8.1. Installing the correct Xposed version and rebooting casues a boot-loop.
Flashing the uninstall.zip and wiping davlik through TWRP sometimes gets out of the boot-loop. Other times it doesn't and the ROM has to be flashed again. Waiting for a permanent fix on this.
Unfortunately I can't get GravityBox without the Xposed Framework.
I have installed xposed framework on stock oreo.
Ago time I used fastboot method to updated to oreo. I have my device rooted with magisk and the last versión of twrp recovery... and yesterday looking for news in Xda I found an update OPS28.85-17 or to be precise a debloated ROM created by NzedPred. I decided to flash and also too the kernel elemental x g5+ v3.00 for oreo stock.
now xposed and the magisk modules works...
iluyrc said:
I have installed xposed framework on stock oreo.
Ago time I used fastboot method to updated to oreo. I have my device rooted with magisk and the last versión of twrp recovery... and yesterday looking for news in Xda I found an update OPS28.85-17 or to be precise a debloated ROM created by NzedPred. I decided to flash and also too the kernel elemental x g5+ v3.00 for oreo stock.
now xposed and the magisk modules works...
Click to expand...
Click to collapse
So does it mean that custom kernel is one of the requirement to get Xposed working on oreo ?
Thank you
Harsh.gundecha said:
So does it mean that custom kernel is one of the requirement to get Xposed working on oreo ?
Thank you
Click to expand...
Click to collapse
Yes I think so... but I haven't tried to install xposed in ops28.85-13 with a custom kernel 'cause I had already updated. If you'll try let me know if it works please. Maybe you use another kernel but for now there is no way on stock kernel al least for me same bootloop result.
iluyrc said:
I have installed xposed framework on stock oreo.
Ago time I used fastboot method to updated to oreo. I have my device rooted with magisk and the last versión of twrp recovery... and yesterday looking for news in Xda I found an update OPS28.85-17 or to be precise a debloated ROM created by NzedPred. I decided to flash and also too the kernel elemental x g5+ v3.00 for oreo stock.
now xposed and the magisk modules works...
Click to expand...
Click to collapse
Really interesting, thanks for your report.
Found this thread late, after multiple installs and attempts to install Xposed and getting either boot loop or soft brick as a result.
For what it's worth, I got those results with the Elemental X kernel.
I only use 1 or 2 modules for Xposed so it's not enough for me to go back to nougat at this point.
Subscribing to thread and hoping this is resolved soon.
Thank you very much for this information. Actually, I had upgraded to Oreo and I liked it a lot, but I went back to Nougat only for Xposed and now I go back to upgrade and stay at 8.1 with Xposed
markbonn said:
Thank you very much for this information. Actually, I had upgraded to Oreo and I liked it a lot, but I went back to Nougat only for Xposed and now I go back to upgrade and stay at 8.1 with Xposed
Click to expand...
Click to collapse
If you do upgrade to oreo and install xposed please post on steps as well as how good Xposed works on g5+ on stock oreo !
Thank you
Any news on this? I'd like to stay on stock for some time, maybe until lineage gets an official release.
I'm running Xposed via Magisk with no issues on NZedPred's TWRP Flashable Stock Oreo with ElementalX kernel
dglenn1957 said:
I'm running Xposed via Magisk with no issues on NZedPred's TWRP Flashable Stock Oreo with ElementalX kernel
Click to expand...
Click to collapse
Is GravityBox and other modules working fine ?
Harsh.gundecha said:
Is GravityBox and other modules working fine ?
Click to expand...
Click to collapse
No issues with Gravity Box. The other modules I use are working fine as well.