Database Users

Viper4Android for Moto G5 Plus

I tried installing the viper4Android on moto G5 Plus India variant and installed the driver.
I have already installed busybox and rooted with su.
But the viper4Android is not processing the audio when played through poweramp player. Also I have made the required audio settings in poweramp.
Any help in this regard is appreciated.

Which su you flashed?
22sumit said:
I tried installing the viper4Android on moto G5 Plus India variant and installed the driver.
I have already installed busybox and rooted with su.
But the viper4Android is not processing the audio when played through poweramp player. Also I have made the required audio settings in poweramp.
Any help in this regard is appreciated.
Click to expand...
Click to collapse

pankajgavri said:
Which su you flashed?
Click to expand...
Click to collapse
Chainfire SU 2.79.
Got v4A working but need to manually restart it each time I plug in earphone.

22sumit said:
Chainfire SU 2.79.
Got v4A working but need to manually restart it each time I plug in earphone.
Click to expand...
Click to collapse
I got it to work with Magisk v11.6 using this zip - Arise Magisk Compatibility Module v2.2 LS
cant seem to find the source thread though.
No need to restart everytime.

deepakdtg said:
I got it to work with Magisk v11.6 using this zip - Arise Magisk Compatibility Module v2.2 LS
cant seem to find the source thread though.
No need to restart everytime.
Click to expand...
Click to collapse
Did you ever get it working better with superSU? I couldn't get it to work at all.

roygbiv859 said:
Did you ever get it working better with superSU? I couldn't get it to work at all.
Click to expand...
Click to collapse
Well, I flashed superSU after uninstalling magisk, the V4A app that I flashed earlier still worked fine. So, I didn't bother to check if it worked on a clean install.

same problem at me. i've tried any version of v4a but nothing work. Suggestions?

I have same problem with SuperSU 2.79. always have to exit viper then restart to begin processing. Makes no difference with which Music player i use it always stops processing. Didnt have this problem on aexop ROM though. I also tried using magisk but had same result with failure to keep processing enabled.

Ramrod71 said:
I have same problem with SuperSU 2.79. always have to exit viper then restart to begin processing. Makes no difference with which Music player i use it always stops processing. Didnt have this problem on aexop ROM though. I also tried using magisk but had same result with failure to keep processing enabled.
Click to expand...
Click to collapse
Did you installed viper4android magisk module? I also noticed that on some roms audio modification magisk module causes problems with viper.

washoq said:
Did you installed viper4android magisk module? I also noticed that on some roms audio modification magisk module causes problems with viper.
Click to expand...
Click to collapse
i've tried whit magisk. Magisk doesn't work and then i have used classic method. Is this the problem?

Marco2701 said:
i've tried whit magisk. Magisk doesn't work and then i have used classic method. Is this the problem?
Click to expand...
Click to collapse
I don't know, maybe. I am using Magisk v13 + Busybox by osm0sis (magisk module) + Viper4Android FX (magisk module) + Viper4Android v2.5.0.5 (flashable zip).
I also have FX Compatible Mode set to Compatible in Viper settings and Music FX disabled. My current ROM is Pure Nexus.

The Arise Sound System zip flash install works much better:
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
But they leave out the critical step of modifying the arise_customize.prop file and placing it in internal storage
BEFORE you flash (SMH).
http://www.droidviews.com/install-arise-magnum-opus-sound-mod-android/
...but I'm having the same issue - no processing, then it works, then not.
MediaMonkey Pro is my music player, and I really don't want to use another one.
Grrr...
-G

Have you tried using a different music app like the Google one. Always found it a struggle with power amp.

Most of the magisk modules will fail on the moto g5 plus. You need to flash a custom kernel in order for the modules to work, including magisk hide.

Marco2701 said:
i've tried whit magisk. Magisk doesn't work and then i have used classic method. Is this the problem?
Click to expand...
Click to collapse
I'm on RR nougat final. Can you give me a working process to install viper4android on my Moto G5 plus which has presently TWRP+Magisk 16.0.

Yeshu_bablu said:
I'm on RR nougat final. Can you give me a working process to install viper4android on my Moto G5 plus which has presently TWRP+Magisk 16.0.
Click to expand...
Click to collapse
Disregard the posts from a long time ago and install this (see screenshot) from the Downloads section of Magisk (for me it appears in Modules because it's installed), it's very easy and works perfectly.

Dahenjo said:
Disregard the posts from a long time ago and install this (see screenshot) from the Downloads section of Magisk (for me it appears in Modules because it's installed), it's very easy and works perfectly.
Click to expand...
Click to collapse
Thank you for the reply. It seems Viper is not working properly even if I did it in your method. Should I uninstall audio fx?

Yeshu_bablu said:
Thank you for the reply. It seems Viper is not working properly even if I did it in your method. Should I uninstall audio fx?
Click to expand...
Click to collapse
Yes, you must have something conflicting, possibly from already trying other versions but hard to tell what. I've been using either that or the one by ShadySquirrel (also in Magisk/Downloads) for several months on dozens of installs of the popular nougat & oreo ROMs with zero issues.
Try a fresh install after full wipe (dalvik/system/data/cache) - install only ROM + gapps (no custom kernels until after Viper is working) - boot once to system/desktop to make sure all is ok but don't install anything yet from playstore/SD/etc - install Magisk in TWRP, reboot system - open Magisk, do any requested updates, check safetynet fully passes (if not install safetynet fix or will get errors trying to install from Downloads) - find Viper in Downloads, choose to install (not download), when finished choose reboot - open/configure Viper, check on something very basic like default music player, should be working - keep checking as you install apps/kernels/etc so that in case something conflicts you'll know what.

Uninstalling OGYoutube?

Hello, a while back i installed OGYoutube for my OP5, however i want to try the new iYTBP but that means i have to uninstall the old mod. However i cannit seem to get it to remove.
I think i flashed it with TWRP and it was a magisk module, so i tried uninstalling it wirh magisk but it still remains. And i do not have the old file so i cannot twrp flash it again.
It came with a 2nd app named OGsettings and downloads.
Does anyone know how to uninstall both please, i used an u install app with root access and it didnt work, the phone jist reboots and its still there.
Thanks in advance!

Go into TWRP, mount system, then go to the file manager and delete it from there

thanks, that worked perfectly!

Tried manually flashing firmware with fastboot and now no system

Ok so I've been having a hell of a time with this phone so far. I have the boost mobile variant (xt1766). I unlocked the bootloader, installed twrp, but forgot to make a backup before flashing supersu, after which my phone would no longer boot so I flashed lineageOS. It booted up fine but I had no 3g connection so I wanted to go back to stock. I downloaded the stock firmware, but couldn't get RSD lite to install on my computer so I extracted all the files and flashed them manually with fastboot. After that my phone wouldnt boot and TWRP couldnt mount the data partition so I couldnt restore my lineage backups. I had to format the data partition in order to restore from backup but now I have nothing on internal storage, and my phone wont boot into system unless I boot into factory mode from the bootloader. It boots up fine in factory mode but now I have no network connection, no service whatsoever.
Under sim status it says Network: unknown, cellular network type: unknown, Service state: Radio Off, etc. I tried manually turning the radio on but that didn't work. I really just want to go back to stock but I don't understand how to accomplish this. I flashed everything in the firmware package in the correct order, and somehow it just rendered my phone useless. any help would be much appreciated. I've tried just about everything and I'm at a loss here.

Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.

AMShiech said:
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
Not "lame" unless that's the latest descriptor for a reliable, fully functional, device optimized ROM that just works. If you want additional bling/tweaks flash Xposed framework and a few well regarded modules like GravityBox.
Alternatively, you can cycle through the various custom ROMs and decide which suite of compromises you're willing to live with. Suggest a careful read of the relevant ROM thread before diving in. Be sure to backup what works (including stock!) and store those nandroids on a SD card and/or off-device.
Good luck.

AMShiech said:
Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.

madbat99 said:
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.
Click to expand...
Click to collapse
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.

AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
No, regular Xposed. Wipe cache and dalvik, and wait. Let it sit 5 - 10 minutes. It has to optimize everything. Make sure it's the arm build. It works fine, just gotta let it sit. First boot takes a good bit.
Or use magisk, and install Xposed through that.
Do not use that old purity crap. That's why the links are dead. It's old crap. Xposed works fine with no extra steps or messing with selinux.

AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
That's BS; don't overcomplicate things. Xposed framework installs fine in enforcing mode. Make sure you have the correct framework for Android 7.1 (SDK 25) and your hardware (arm). You will also need the corresponding management app. There is no need to wipe anything before/after flashing the framework although doing so can't hurt. First boot will take awhile; patience is a virtue.

Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol

AMShiech said:
Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol
Click to expand...
Click to collapse
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.

madbat99 said:
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.
Also I certainly hope that's not the app I think it is (the smiley face)? You're not allowed to promote or speak of that "warez" here. So screenshot is not a great idea.
Click to expand...
Click to collapse
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. Ive tried installing it with TWRP a couple times with no success. As far as PoGo I've actually never even played that game. Was just curious about it.
And I'm not sure what app you're referring to but that "wow" face is a chrome shortcut. Changed it cuz I didn't like the default grey square.

AMShiech said:
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. As far as PoGo I've actually never even played that game. Was just curious about it.
Click to expand...
Click to collapse
Trend continues; reread post you're disparaging. Or module OP. f2fs loopback 'fix' gets flashed in twrp or via fastboot (for the adventurous).

I edited my post shortly after your quote. Tried installing with TWRP more than once. Doesn't show up in magisk modules.

Just flashed with fastboot and now it seems to have worked. Fastboot for the win.

Maybe all caps will help out
go inside magisk manager> downloads search F2FS LOOPBACK BUG WORKAROUND, FLASH INSIDE TWRP!!! WILL NOT WORK IF ATTEMPTED TO FLASH THROUGH MAGISK MANAGER!!!!

[HELP][MAGISK] Installed magisk modules not working

I recently rooted my samsung s8 and installed & updated magisk manager. I tried installing a few modules from magisk but despite the fact that everything seemed to work in the magisk terminal and the app saying that the modules were ok, nothing works. By doesn't work i mean that it doesn't show up,doesn't apply any fonts or boot animations etc. Any ideas?

SteliosPapamichail said:
I recently rooted my samsung s8 and installed & updated magisk manager. I tried installing a few modules from magisk but despite the fact that everything seemed to work in the magisk terminal and the app saying that the modules were ok, nothing works. By doesn't work i mean that it doesn't show up,doesn't apply any fonts or boot animations etc. Any ideas?
Click to expand...
Click to collapse
Try reflashing the zip from the recovery. When I was updating magisk by the recommended method it breaks, and I had to reflash every time I installed a module. Then i started using the soldier9312's custom ROM and magisk Here: www soldier9312 de (cant post links)

Viper4Android

Does anyone know if Viper4Android magisk module is working for the OnePlus 8 Pro? It hasn't been updated since 2019 and I was wanting to install it without having to install a custom kernel

dgunn said:
Does anyone know if Viper4Android magisk module is working for the OnePlus 8 Pro? It hasn't been updated since 2019 and I was wanting to install it without having to install a custom kernel
Click to expand...
Click to collapse
Can confirm it works. Install module and reboot. Open Viper4Android, install driver and reboot.
Working fine right after.

cas1991 said:
Can confirm it works. Install module and reboot. Open Viper4Android, install driver and reboot.
Working fine right after.
Click to expand...
Click to collapse
I have tried the magisk module and it is not working properly. It freezes up trying to install the driver and then it does not show that it is processing. Once I restart the device it tells me I need to install the driver again which freezes up and then does not work. I have installed it about five times now with no luck. It really really needs to be updated

dgunn said:
I have tried the magisk module and it is not working properly. It freezes up trying to install the driver and then it does not show that it is processing. Once I restart the device it tells me I need to install the driver again which freezes up and then does not work. I have installed it about five times now with no luck. It really really needs to be updated
Click to expand...
Click to collapse
This works

Works for me just make sure audio modification library is uninstalled and reboot, then install from magisk, reboot, install driver, reboot, profit!

Doesnt work for me, i have busybox, magiskhide props, miui 10 sounds, and systemless hosts installed. When i try to download viper, Magisk vanishes. If i download and try to add the module from a zip, Magisk crashes by just... vanishing....

PMad said:
Doesnt work for me, i have busybox, magiskhide props, miui 10 sounds, and systemless hosts installed. When i try to download viper, Magisk vanishes. If i download and try to add the module from a zip, Magisk crashes by just... vanishing....
Click to expand...
Click to collapse
Have you tried the above attached module?

PMad said:
Doesnt work for me, i have busybox, magiskhide props, miui 10 sounds, and systemless hosts installed. When i try to download viper, Magisk vanishes. If i download and try to add the module from a zip, Magisk crashes by just... vanishing....
Click to expand...
Click to collapse
Hi, on my previous device, I experienced this and, either upgraded the apk, or downgraded the apk by uninstalling (magisk apk), reinstalling older version, & reboot. You can find all the released apks on APKMirror. I'm personally using the EXOS magisk ROM, which has options for viper and Dolby Atmos(w/ EQ), with the module Audio Modification Library.

Just flash the 2.7.1.6 zip on magisk manager, reboot , open viper, install the drivers , reboot , done..

Samuel Holland said:
Hi, on my previous device, I experienced this and, either upgraded the apk, or downgraded the apk by uninstalling (magisk apk), reinstalling older version, & reboot. You can find all the released apks on APKMirror. I'm personally using the EXOS magisk ROM, which has options for viper and Dolby Atmos(w/ EQ), with the module Audio Modification Library.
Click to expand...
Click to collapse
Is yours working ok via the EXOS rom? I also have that installed but Viper won't process unless I have "Attach audio effects" toggled on in settings. On other phones, I've had to toggle this on and off right after and it would work, but with current setup, I have to leave it on for it to work. That may be causing problems with it not processing using youtube for me.

Do you have installed audio modification library?

Is viper4android working on the lastest OTA and magisk?

xXx no limits has this as an option and I can assure you it works.

It was working with ob1 but ob2 has been a no go. I've tried over and over but it ain't happening.

dladz said:
xXx no limits has this as an option and I can assure you it works.
Click to expand...
Click to collapse
I can confirm that it works.

Navyvet63 said:
It was working with ob1 but ob2 has been a no go. I've tried over and over but it ain't happening.
Click to expand...
Click to collapse
Working great on ob2 for me

I think I will try downgrading to ob1, install v4a then upgrade to ob2.

On ob2, magisk install fails for me once trying to download latest apk

pocholo36 said:
On ob2, magisk install fails for me once trying to download latest apk
Click to expand...
Click to collapse
APK?...why?
You need the viperfx for Android 11 zip. .
Just flash it on magisk...and is ready

cultofluna said:
APK?...why?
You need the viperfx for Android 11 zip. .
Just flash it on magisk...and is ready
Click to expand...
Click to collapse
I don't know, maybe something to do with my vpn ..
Is the Android 11 one the 2.7.1.6 zip in this thread?