Android Head unit in a MK4 caddy with canbus - Android Head-Units

Hi guys
Hoping someone here can help. I bought a cheap android head unit from eBay and it came with a quadlock adapter and iso adapter but neither fit my MK4 caddy. See picture attached of my quadlock compared to what arrived.
Anyone have an idea on how to get these connected?
Imgur.com/a/F5VznK7
Cheers
Andy

Related

Please help! Klyde head unit in 2013 Hyundai sonata can't get the sound working

Hello
I've searched and tried plenty, and maybe this was covered but I can't find anything..
I recently bought a Klyde unit for my 2013 Hyundai sonata with dimension stereo and stock amplifier..
The wiring seemed simple enough, but I cannot get any sound through my speakers.
I did quite a bit of troubleshooting and even got a replacement canbus decoder from the seller but still nothing..
Is there a simple solution that someone else knows or should I just return the thing and get a different one..
Thanks a million I'm stumped
Edit: the rca cables have sound coming out but I'm trying to keep the stock amplifier and speakers..
The spdif signal going to the canbus "amp controller" box gets 12v power, I get about 200 to 250mv signal into it but 10mv going out to the car's harness
Is there a way to "enable" the amp controller like the Metra boxes?
Sent from my SM-N900W8
Anyone?
I have more pics if it helps
Thanks again
Bought a Metra amp interface and now it works
I am wondering if this might be how to solve my problem. This is the post I made on the large android head unit thread, do you think this metra amp interface would solve this for my lancer also?
if so which did you get and where, I think you have the same head unit I have.
"I just received my unit thursday I had it installed friday, but it was not giving any audio signal and the amp wasn't being turned on. They tried to manually turn on the amp, but there was still no audio coming through.
so I am wondering if there is anything I can do to troubleshoot it myself while waiting for a reply from the seller. There is a few notable things that might be the problem but I figured I would ask here to check before I start.
First there is a red wire that looks like it was cut right near the canbus unit it came this way out of the box, the installer said it had power to it, I am wondering if it's supposed to be cut or if reconnecting it could help, also there is a blue wire on the harness that is not connected into the harness also. will attach pictures. (or not because I am not allowed hopefully you can figure out how to see them below...)
red wire ------- pasteboard dot co/MO1wkXJ.jpg
blue wire ------- pasteboard dot co/MO6kqKs.jpg
back of unit ---- pasteboard dot co/MO9x1eI.jpg"
So what Metra Interface Kit...
I know this is an old thread but I have a 2014 Sonata Limited w/ Dimension Amp and android head unit doesn't output audio either with the Amp controller box or spdif box. I believe these boxes that came with it are not working properly. Please inform me of what kit I need to purchase.
Seeing reports...
I'm seeing reports the the hybl-04 is the Metra kit that you have ended up using. Is this correct?

How to get a Canbus Decoder box replacement - Ford Mondeo Mk4

Hello,
I am using an android head unit (px30) in a ford Mondeo mk4. Suddenly the screen did not power on and found that the canbus stopped working. I need to buy a replacement one, but I need to ensure that will work in the specific model. I 've tried to ask sellers in aliexpress (dasaita, isudar, etc) but they can't confirm that will work. Should I take the risk and buy one? Is there a way to check and pick the correct one? (Mondeo does not have ACC connection pin to power on red wire coming from iso cable through the harness, it needs canbus and CANL+CANH will tell the unit when to power or not, so i had to modify and connect both red-ACC with yellow-Power cables together but now I have to shut down the unit on my own). So Is there a way to find the correct canbus for ford or does not matter which one to buy and confirm only the car model?
Thanks and Regards,
Tasos
I take it you didn't buy your HU from Aliexpress or you could just ask your original seller to sell you a new one. In theory any Mondeo MK4 CANbus box should work if all you need is to control power and illumination as those are separate wires coming out of the CANbus box. You might get compatibility issues if the new box doesn't translate all the bus messages your HU needs for other features like temperature, open doors...
I would suggest you start by opening the broken box and re-solder all the connector pins and any other pins of roughly the same size you see.

How to fit VW reverse camera video decoder

Hi
I have recently fitted an Android head unit in my VW Passat. It is an Erisin, not sure about the model. This was an easy installation as it plugged straight into the existing cradle. After a few settings adjustments this works great. As the car has an OEM reversing camera I had a to purchase an adaptor that would make it work with the new unit. I was hoping that somebody might be able to give me some directions on how to fit this thing as I really don't have a clue. Where do the 3 wires have to be connected?
I can't post a link but if you Google search VW076 the first result will give you a picture of the part.
Thanks in advance.

Ossuret S8 8G+128G How to Wire Fan?

Hello,
I bought my first android head unit, the Ossuret S8 8G+128G. It came with a fan attached to the back of the unit. There is no direct connection on the back for the included fan and the wiring diagram doesn't show specifically where to connect the fan to.
Attached is a pic of the back of the unit with the wiring diagram. Can someone please advise how to wire up the fan?
Any help is much appreciated, thanks.
Post Android system information including MCU version
Also what does seller suggest and what has been tried
SOLVED. I spoke too soon, I was looking at the wiring diagram before looking at the wiring. The supplier has included a fan connection in the wiring bundle.

How to identify head unit

Hi members,
Long time no see !
I have bought an android unit 8.8" for an Audi A5 (for a friend) and the harness is not compatible with the car. The seller-on ebay- is not answering anymore, so I need some help to solve the problem. They described it as a Junsun unit, with 4gb/64g and android 10, but i couldn't start it. I have some pictures with the unit and the harness, maybe I can make the connection myself.
What would help me would be the pinout for both 32 pin white connector and for audi 20 pin AC connector.
Thanks for your help!
Any help? Any advice? I cannot solve this one. Thanks in advance!
dicabkl said:
Any help? Any advice? I cannot solve this one. Thanks in advance!
Click to expand...
Click to collapse
There are a lot of fake Junsun head units on ebay. I think best is to return the device and buy from a trustable seller.
Thanks for your answer! Actually, I cannot return the unit because I saw very late that is not the same harness. Where can I find the pinout for my 32 pin white connector? I think it is standard one
dicabkl said:
Thanks for your answer! Actually, I cannot return the unit because I saw very late that is not the same harness. Where can I find the pinout for my 32 pin white connector? I think it is standard one
Click to expand...
Click to collapse
Sounds like a (not so) funny project.
Another approach may be to re-engineer the pins of the head unit by using the pinout of a compatible car and the wiring harness shipped with the head unit.

Resources