Hello everybody, I really don't know who to ask for help so I hope I am in the correct area of the forum.
I recently replaced the radio on my European Ford Fiesta 2011 1.2L Petrol with an Android unit from Aliexpress. The unit is the one here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unfortunately the only thing that doesn't work are my steering wheel buttons. I only have a set of them placed on the left side of the steering wheel.
This is becoming annoying, especially because today I almost run into a car accident while decreasing the music volume on the unit itself.
Now, Aliexpress doesn't want to refund or replace the product, because according to them it should work straight away. But I remember that when I ordered the unit there was a customer comment saying that didn't work for him as well, but he fixed it doing some rewiring (I remember mentioning pink and brown something like that. Unfortunately the comment has been removed, and it was in russian). Obviously I tried to connect pink and brown together and doesn't work.
I will add the pictures of all the connectors, I managed to find online the pinout with all the wiring colors. The unit came with some kind of CAN decoder, what's written on the label is:
P/N: FORD-RZ-11
SW: 0003
HW: GM-ND03
FOR: 09-12
(190216)
The rest is in Chinese, the QR code doesn't work and if I search on the internet I cannot find anything.
I have also draw a diagram showing the wiring between this box, the main car connector and the back of the radio unit.
Can someone please help me with this issue?
Suggest having a read through the forums, you'll find alot of discussion on your topic.
Reading might help you understand the issues involved and help form directed questions along the way.
I dont understand the comment around 'aliexpress doesn't want to refund or replace' because the issue you experience is exactly what the aliexpress dispute process is for. Use it.
I've requested mods move this to Android Head units as this isn't an android auto topic.
Thanks for asking to move the thread to the proper section.
I have been reading online for 2 days and I cannot find any answer to my problem. All I know is that my problem is electrical, I am 100% sure about that, I just don't know what to cut and connect together.
Update.
This morning I went in the car and cut pink and brown wire.
I then connected all together pink (SWC1) + Brown + White/Green (SWC2). Doing so when I do the pairing of the buttons on the device I can see that the buttons get detected but still doesn't work. It look like something is shorting and making conflict in the unit.
Now I know that the user feedback on aliexpress was right, I do have an electrical issue and I need to cut and bridge a wire, but I don't know what.
Is there someone good in electronic that can review my connection scheme I made above and help me out? I am willing to pay a beer
Hi
I am having the same issue as you with mine
Did you manage to sort this or could you help me with getting it to recognise the steering controls
Which wires did you wire and what did you do?
The pink wire and brown wire both seem to go into something
UPDATE
UPDATE:
After messing about with the wiring and doing some research i figured out how to sort it and it worked for me. I had to cut the pink (SW1 wire) and connected this to the pin 10 black (GND) wire from the Connector x1 using some old cable to make it longer and connect them together , this gave a different voltage each time a button was pressed and in the steering wheel learning app it recognised it and i was able to set it up, so far it is all working.
If you need any help you can email me: [email protected] and i will try to help you
deelaw12 said:
Hi
I am having the same issue as you with mine
Did you manage to sort this or could you help me with getting it to recognise the steering controls
Which wires did you wire and what did you do?
The pink wire and brown wire both seem to go into something
Click to expand...
Click to collapse
deelaw12 said:
UPDATE:
After messing about with the wiring and doing some research i figured out how to sort it and it worked for me. I had to cut the pink (SW1 wire) and connected this to the pin 10 black (GND) wire from the Connector x1 using some old cable to make it longer and connect them together , this gave a different voltage each time a button was pressed and in the steering wheel learning app it recognised it and i was able to set it up, so far it is all working.
If you need any help you can email me: [email protected] and i will try to help you
Click to expand...
Click to collapse
Have you got pictures of the wires now and showing how its done? I will have to try it with mine.
Same problem
Hello,
I'm currently facing the same problem does anybody have pictures from a working set of connections? or a diagram?
Thanks in advance
Al zo steeringwheel problem
I have the same problem. Does anyone have a picture of what i must change?
I have the exact same issue, a few pictures detailing the solution would be greatly appreciated.
Hi am facing the same problem does anyone has any pictures of wiring
I have the exact same issue, a few pictures detailing the solution would be greatly appreciated.
Thecproblem on mine is that when i connect the canbus wire on input D .
The volume goes mute and back to normal again and doesn't let the radio work properly.
Any knowledge appreciated
Robsat said:
Thecproblem on mine is that when i connect the canbus wire on input D .
The volume goes mute and back to normal again and doesn't let the radio work properly.
Any knowledge appreciated
Click to expand...
Click to collapse
Do you still have the issue? I had the same and figured it out eventually. Let me know if you need some help
Patrickkk17 said:
Do you still have the issue? I had the same and figured it out eventually. Let me know if you need some help
Click to expand...
Click to collapse
Hi man no i haven't solved the problem yet .any help appreciated.
Can you provide a few pictures of your connectors?
Hello guys.
Like you I have problems with SWC, also I have only Key 2 wire ( Blue/White) and nothing else no pink wire, seriously I'm lost. Seller in Aliexpress have no idea about what I'm asking. I tried everything wiring cables to each other in all possible combination , I'm tired and in lack of ideas. If someone had resolve the problem I appreciate any help.
Ford Fiesta Trend 2016
ElKouen said:
Hello guys.
Like you I have problems with SWC, also I have only Key 2 wire ( Blue/White) and nothing else no pink wire, seriously I'm lost. Seller in Aliexpress have no idea about what I'm asking. I tried everything wiring cables to each other in all possible combination , I'm tired and in lack of ideas. If someone had resolve the problem I appreciate any help.
Ford Fiesta Trend 2016
Click to expand...
Click to collapse
What is connected to your key1 wire?
Patrickkk17 said:
What is connected to your key1 wire?
Click to expand...
Click to collapse
No key 1 I just have a Key 2 wire. I tried to cut all wires and linked one by one. Finally I connected a white with a blue and I got different voltage. I restored all other and it works now.
Thank you for your reply I deeply appreciate.
Related
Hi all
I just order this head unit from iceboxauto:
vauxhall-opel-astra-j-cascada-2010-2012-android-8-v5754
I try to get informations online but nothing, seems that no one has installed it.
Can any of you help me to find something more that few pictures?
Thank you very much
vauxhall-opel-astra-j-cascada-2010-2012-android-8
Hello,
i have bought last month a similar Unit (OTOJETA-Android-8 on Aliexpress).
It is still not integrated completely, but i work on it.
What do you want to know?
vauxhall-opel-astra-j-cascada-2010-2012-android-8
Hi thank you for reply
I received today the HU and I cannot wait to install it
What do you mean with: is not completely integrated?
Do you know where to find a kind of step by step installation process, just to make sure I’m not going to do anything badly wrong :silly:
And finally.......what is your personal thought about those HU????????
Thank you again :laugh::laugh::laugh:
vauxhall-opel-astra-j-cascada-2010-2012-android-8
For installation instruction, you can watch on youtube (GvSAB8IKEX - Title: Astra J Einabu von Navi 900 auf Android S160).
This is a older Android Unit, but the same car.
I still need to mount the reverse cam, a amplifier for bass (sound quality is worse than the OEM) and covering
I miss some features from my old "CD 400 +" like:
- Adapter for USB and AUX
- outside Temperature is not shown
- Light dim is not possible
- Speaker is hum / buzz about the hole time
The Unit is very smooth/fast with PX5.
Can you edit the Title (like: Vauxhall / Opel Astra J / Cascada 2010-2012 Android 8 4GB PX5). To help other people to find this thread.
Today I fixed following problems:
- show outside Temperature
Settings -> CAR -> Factory settings -> Password 126 -> CanBus -> set Canbus to GM05
- USB Adapter (micro USB)
http://www.ifz-berlin.de/ins_pdf/13397904.pdf
Page 6
Thank you!!!!!
I just try to change the canbus to GM05 but it doesn’t appear on mine!!!!! Someone told me to use Opel but even that one is not present !!!!
I think all system in general is a bit buggy
Please let me know if you find something else!!!
And do you know if it is available any update
Android 8 MTCD 32GB 4GB RAM FACTORY SETTINGS
I have uploaded some Screenshots of my Settings:
https://imgur.com/gallery/NWkaq
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi adrianpop1990 I used 05gm as well and I notice that the temperature appeared by switching the ingnition key!!!! Finally I’m happy!!!!
Did you figure out how to switch off the unit??? At the moment when I push the power button the HU goes into stand by, but I would like to reboot it and I cannot find the way!!
Have you notice any problems with apps crashing???
Copilot is giving me problem as well as google service that in 2 occasion stoped working and froze all the system
I had a problem after the installation and need to restart the HU. I just disconnected the power from the battery after it was in standby.
There are several apps in PlayStore to reboot, but I don't know if they all need root privileges.
I have no similar app crash issues. I asked the seller of my unit for firmware updates and he will send me an update after testing it. I have MTCE version 2.75 now.
Infinity Soundsystem
Hi Guys,
i've got an Opel Astra J GTC (2011) with CD400 and want to buy an Android Radio.
But i can't find anything about compatibility with my Infinity Soundsystem.
Is the Android V5754 compatible with the Infinity?
If not, does anyone know some alternatives?
Hope someone could help me
Possible Canbus issue
Hi,
I have installed a PX5 Android 8 V5754 from Witson and have problems relating to Canbus.
1. I had a CD 400 and after installing PX5, the center console is not working. I have attached Photo_1 for your reference. The yellow box section is not working (No red light behind the volume knob) but the parking sensor and ESP button works. The AC section works and I can also see red light behind the buttons.
2. After making all the connections, I have one connector which I don't know where to put. See Photo_2. Where should this be connected?
3. I have set the CANBUS to 05_GM since my car is opel Astra J but still the center console is not working. So I can not turn off the Android head unit!!! Also on my driver's display I see a strange sign. See Photo_4.
Android 9.0 v5754
Hi Vinai, Please share if your issues has been resolved, unable to switch-off Android HU, center sound unit console controls not working. I'm having the same issues and it's being addressed. I will let you know on the progress
Middle Console not working
When your middle console isnt working correctly then you have forgotten one cable.
I had the same issue.
Search for a big block connector with one single brown cable. This block connector must be connected with a cable behind the display. The cable wich fits the block connector has a black colour with a white frame.
This will help you and solve all your problems at once
adrianpop1990 said:
Today I fixed following problems:
- show outside Temperature
Settings -> CAR -> Factory settings -> Password 126 -> CanBus -> set Canbus to GM05
- USB Adapter (micro USB)
http://www.ifz-berlin.de/ins_pdf/13397904.pdf
Page 6
Click to expand...
Click to collapse
How did you get the micro USB to work?
I've got the USB module in the center console but it doesn't do anything...
I’ve got this unit in my 2015 Vauxhall Astra J VXR, usually when I put it into VXR mode the instrument cluster turns to red from white however since installing this unit it stays white when in VXR mode.
I’m presuming it’s something to do with the canbus settings however I can’t find it, anyone got any ideas?
Hey guys, I recently purchased and installed the seicane 10.1 android headunit in my 2003 Accord. It has the integrated climate control buttons. In all of the reviews and videos I have seen, when making adjustments to the climate control, those adjustments (fan speed, temperature, air direction) should appear on the headunit screen. Since I first installed it, this function has not worked. I have made sure to plug in the small white cable which connects the tablet with the climate control circuit board. When I emailed seicane they told me to check that the Canbus setting was set to "116 Accord_7 (DaoJun)". I checked and it is set correctly.
They also told me to check the "vendor setting" and said that it is located in "settings- system information." I have checked through every setting and menu and can not find anything that says "system information" or "vendor".
They also sent me a new circuit board for the climate control in case it was bad hardware, so i swapped it in and am still having the same issue.
Also, on their website they say that the upper climate control screen (also displays the clock) should work, and it does not.
Basically, I'm looking for some guidance as to my next steps. Has anyone had these issues? Can anyone tell me where I would find the "vendor" setting in order to verify that the setting is correct? I am having a hard time even dealing with seicane because their english is not great.
I have pictures on my google drive but can not post external links until 10 posts. If you can help, please pm me and I can send the link through there. Thanks in advance guys/girls.
Model- HF SERIES H221(1024x600)
Android Version- 8.1.0
Kernel version- 4.4.138+(gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05))
Build number- PX30 8.1.0 OPM6. 171019.030.E1 eng.hct.20181219.213729
MCU Version- MTCE_HF_V3.01_1
CPU- Quadcore Coretex-A35 @1.5G
I have the same issue in an Accord 7 with a Funrover octacore Android 8.1
Pacovich said:
I have the same issue in an Accord 7 with a Funrover octacore Android 8.1
Click to expand...
Click to collapse
Do they refuse to give you your money back too? They tell me that it's too troublesome to return and then offered me $150 refund. Its absolutely ridiculous.
Sent from my SM-G965U using Tapatalk
Incorrect canbus speed
eman2289 said:
Do they refuse to give you your money back too? They tell me that it's too troublesome to return and then offered me $150 refund. Its absolutely ridiculous.
Sent from my SM-G965U using Tapatalk
Click to expand...
Click to collapse
The sound system of my car is a premium one and the radio device must send some commands to the amplifier but it doesn't. Because of that, the gain is too high and little electric noises are perceptible. I have tried canbus options for Hyundai with suffix AMP and the sound volume becomes extremely high. That is not a solution but shows the correct canbus speed is not 38400 bps as set originally. I have read the correct speed for comfort canbus of my vehicle is 95 kbps, perhaps 100 or 125. In all case, is the same speed as Hyundais AMP type have. I think Nissan AMP types give similar results, and another third mark. I don't remind exactly other marks because the key idea is that the canbus comfort speed is not correct and it is also necessary verify all canbus codes and add ones for the premium amplifier. And, thus, the hardware seems to be ok. It is not useful to change it. It is an issue related to software.
I have asked to Funrover for a solution and I have sent them several informations as I have explained here. But they have replied only one time to evade. I think that people wanting to purchase a similar device must wait. I think this issue is related to Android 8.0 and 8.1. In all case, Funrover must give me a solution even if they must contact original software developers who probably work for many integrators. If Funrover doesn't give a solution, I consider that another clients must be select a different mark.
Did you ever manage to fix this issue?
I've just installed the same unit and have the exact same issue.
brettf said:
Did you ever manage to fix this issue?
I've just installed the same unit and have the exact same issue.
Click to expand...
Click to collapse
Nope, still fighting with seicane about returning it. You're in for quite the headache...
Sent from my SM-G965U using Tapatalk
Oh no!
There's one piece of info I've found on that I've yet to try.
Check out this video:
https://youtube.com/watch?v=pPvaCGCaypo
The person had the same problem as us. In the description he explains how he fixed it.
Basically just try swapping the white and white black wire that go to the main harness from the climate controls.
Edit: Haven't tried it yet. Might be worth a shot
EDIT 2: I did it. I swapped the wires now and it works.
To anyone that has the same issue on the Seicane unit for the Accord 7 - model H221(L) etc.
I found the solution - in my original post below I pointed to the video of another person with the same issue.
In the video description they mentioned how they fixed it: By swapping the white and white/black stripe wires on the 4 pin connector that connects to the climate control board.
This image is linked to in the video, saying that it's how the wires should look after being swapped.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, on my unit, they were already configured this way - and the climate control display was not working.
I tried swapping the white and white/black stripe wires in any case (Which results in their layout being the opposite of this picture), and this solved the issue.
So, it looks like there is a solution. And it's NOT software related.
brettf said:
Oh no!
There's one piece of info I've found on that I've yet to try.
Check out this video:
https://youtube.com/watch?v=pPvaCGCaypo
The person had the same problem as us. In the description he explains how he fixed it.
Basically just try swapping the white and white black wire that go to the main harness from the climate controls.
Edit: Haven't tried it yet. Might be worth a shot
EDIT 2: I did it. I swapped the wires now and it works.
Click to expand...
Click to collapse
eman2289 said:
seicane
Click to expand...
Click to collapse
brettf said:
To anyone that has the same issue on the Seicane unit for the Accord 7 - model H221(L) etc.
Click to expand...
Click to collapse
Does yours Seicane head unit have similar problem with window defrosting like in the video?
https://streamable.com/qz9wr
The relay switch ON/OFF all the time, you can hear a "clik" sound.
maxbfg said:
Does yours Seicane head unit have similar problem with window defrosting like in the video?
https://streamable.com/qz9wr
The relay switch ON/OFF all the time, you can hear a "clik" sound.
Click to expand...
Click to collapse
No issues with mine. Worked as it should. I ended up returning the unit due to multiple other problems
Sent from my SM-G965U using Tapatalk
I had this same problem too -- i'm one of the people in the comments of that YouTube video, who was troubleshooting with the OP.
I'm surprised that Seicane is still sending out cables with the TX/RX wires reversed... Still haven't figured out how to change Celsius to Fahrenheit though.
I've also mounted a Seicane H221 on an Accord 7 (2005) and I'm facing some issues.
MCU version: MTCE_HF_V2.96_1
Build number: px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20181102.112849 test-keys
Regarding climate control, the car is equipped with dual zone. When first mounting the head unit, I was using the provided Y-cable which is in case for single zone AC. Re-mounting without the Y-cable solved the issue.
I have still some issues:
1/ Important: Climate control OSD work, buttons works but temperature is definitly not managed correctly: erratic temperature, too cold, too warm, fullspeed fan while temperature difference between requested and actual is 1deg C, etc...
2/ Less important: head LCD display is now blank (no temperature, hour, ...)
3/ Behind steering wheel LCD display do not display temperature
I suppose these 3 issues are somewhat linked to CANbus management. First, I'm wondering if I should consider upgrading the MCU firmware (MTCE) ? Android ? CANbus protocol ?
I've read Hal9k bring some improvements on these units. Has anyone tried upgrading Seicane H221 with this ROM ?
Thank you in advance for your answers !
Anyone know how to get into recovery mode?
Any ideas about how to get into developer's options, I'm using Android 9 and pressing build # 7 times doesn't work.
hmm, i have bought the same android unit from seicane, this one came with android 9 , and somehow i cannot get the airco display to show up.
I did already try the connector cable swap ( white <--> whiteblack ) , but it doesn't seem to do anything.
I am also wondering, the unit doesn't show any lights on the buttons, so i am unable to operate the a/c in the dark.
is that by design, or should there be lights in the buttons?
Does any of you guys have any suggestions?
I have similar issues to some of you guys on a Seicane unit in my Australian Honda Accord Euro 2007 - I believe this is the same car as the US Acura TSX.
1) The air con controls keep popping up on the display every couple of minutes even though I'm not touching any of the physical buttons/knobs.
2) The outside temperature reading has disappeared from the instrument cluster behind the steering wheel
This is the unit I have:
I'd love to know if anyone has any potential fixes!
brettf said:
To anyone that has the same issue on the Seicane unit for the Accord 7 - model H221(L) etc.
I found the solution - in my original post below I pointed to the video of another person with the same issue.
In the video description they mentioned how they fixed it: By swapping the white and white/black stripe wires on the 4 pin connector that connects to the climate control board.
This image is linked to in the video, saying that it's how the wires should look after being swapped.
However, on my unit, they were already configured this way - and the climate control display was not working.
I tried swapping the white and white/black stripe wires in any case (Which results in their layout being the opposite of this picture), and this solved the issue.
So, it looks like there is a solution. And it's NOT software related.
Click to expand...
Click to collapse
Thank you this worked for me everything pops up but in centigrade unfortunately. I also lost the outside temperature on the gage cluster. I also noticed the fan speed was pretty slow and the duel buttons and heater buttons do not work. My unit had a very noisy display and now it changes colors and goes crazy Im wondering if it is another wiring problem. I also have a way that you guys can put android auto on it. you can get the headunit reloaded apk and once you do that Android Auto works perfectly.
since the wire swap was not working for mine, seicane is sending me a nuw board + new cables...
I'll update if this is a solution, however, i doubt it.
ps: the customer support isn't that bad, the only problem i face is, the don't understand english
you have to be very specific and don't use complicated words.
dandandan75 said:
Thank you this worked for me everything pops up but in centigrade unfortunately. I also lost the outside temperature on the gage cluster. I also noticed the fan speed was pretty slow and the duel buttons and heater buttons do not work. My unit had a very noisy display and now it changes colors and goes crazy Im wondering if it is another wiring problem. I also have a way that you guys can put android auto on it. you can get the headunit reloaded apk and once you do that Android Auto works perfectly.
Click to expand...
Click to collapse
You can choose F in factory settings iirc
Hello! I have the same Celsius to Fahrenheit settings issue with my Seicane. Were you able to figure that out? Want all displays/settings to be in Fahrenheit. Thanks in advance for your help.
pjottrr said:
since the wire swap was not working for mine, seicane is sending me a new board + new cables...
I'll update if this is a solution, however, i doubt it.
ps: the customer support isn't that bad, the only problem i face is, the don't understand english
you have to be very specific and don't use complicated words.
Click to expand...
Click to collapse
So i got the new board and installed everything ...
and guess what, as expected it wasn't working, still no airco diplay.
so i went to my car dealer and he explained to me that i have a kind of freak car.
in the states it would be sold as an honda acura tl , but it was built in the UK . i have one of the first cars that came from the production line, and i think they changed some things along the way.
apparently the radio is the only thing different from the acura. it is the same as the normal accord 2003.
so he told me to look for a can-bus setting for the acura.
I couldn't find any, but in a last resort i found a canbus setting 120 "accord 7 'long chinese name' 2 "
as the board i have is version 2 i thought, let's give it a shot.
and upon reboot the first thing i saw was, in the upper right corner, i suddenly had the outside temperature displayed
i knew it was good and indeed it was. i now have a fully functional headunit.
i have no clue if this board swap was needed, maybe not , but it doesn't really matter, it works, and I'm happy.
I recently bought me a unit from Seicane and was trying to update it hoping it would fix my problem of it wont work with my A/C like I dont get any type of animation that tells me the temperature so im hoping updating it will fix it. Does anyone have any idea on where i could find an update and the process to update it and does anyone have any idea why my radio is no showing the temperature animation. When i do auto it comes on like it should, i can control the power of the fan as well but when it comes to using the knob to get it to a certain temp. thats when i start facing problems.When talking to the person that sold it to me they said i was suppose to go to canubus and manual input the A/C settings but i do not have that and the picture they have to help has a different interface than my unit reason why i feel like i need to update. Can some one please help
my radio
APPVER: K4001_NWD_S212701.20190412.18030032.N0026.01
PlatformVER: K40-2019/04/11[19:48:11]-v0.02
MCUVER: V2.1-FF01-20190402-A02-CAN0015-15-00-DVD00000000-00
BTVER: Bluetooth V4.1
CANAPPVER: v.19.05.13A [10:10] [c. 15]
CARTYPE: Honda-Accord-[2002-2007(7Gen)]-[02-07(low)]
Hello,
I also have problems with such a radio, maybe share the firmware?
caleb120897 said:
I recently bought me a unit from Seicane and was trying to update it hoping it would fix my problem of it wont work with my A/C like I dont get any type of animation that tells me the temperature so im hoping updating it will fix it. Does anyone have any idea on where i could find an update and the process to update it and does anyone have any idea why my radio is no showing the temperature animation. When i do auto it comes on like it should, i can control the power of the fan as well but when it comes to using the knob to get it to a certain temp. thats when i start facing problems.When talking to the person that sold it to me they said i was suppose to go to canubus and manual input the A/C settings but i do not have that and the picture they have to help has a different interface than my unit reason why i feel like i need to update. Can some one please help
my radio
APPVER: K4001_NWD_S212701.20190412.18030032.N0026.01
PlatformVER: K40-2019/04/11[19:48:11]-v0.02
MCUVER: V2.1-FF01-20190402-A02-CAN0015-15-00-DVD00000000-00
BTVER: Bluetooth V4.1
CANAPPVER: v.19.05.13A [10:10] [c. 15]
CARTYPE: Honda-Accord-[2002-2007(7Gen)]-[02-07(low)]
Click to expand...
Click to collapse
Hello. Maybe my post can help a bit.
https://r.tapatalk.com/shareLink/to...9&share_fid=3793&share_type=t&link_source=app
Sent from my LM-V350 using Tapatalk
i faced a lot of issues with it , but in the end, it was probably just the canbus setting + the cable not connected correctly( or the board was broken not sure of that one)
Make sure the 4-pin cable is connected to the air-co part ( it comes out really easy so after you installed the head unit, make sure that the cable is still there , you should be able to feel it if it is there
after that ; you should have settings --> car settings --> factory settings
( password for that is 126 )
then go to canbus and try all the different canbus options for your honda there are.
If it works ( i noticed it immediately) you also have the outside temp listed in the right corner of the screen
here the images of my unit
first image; the 4-pin cable , photograph taken while the unit is in the car. camera between the unit and the bin below that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2nd how to get to canbus settings ( "instellingen" = settings ( sorry, i went with my own language for this unit)
go to factory settings and type pin: 126
this is how mine is currently configured
those are all the canbus settings could find on my device
I made an account just to say Thank you so much for this post Pjottrr, I was going crazy because I bought an off brand, off brand cheap Chinese unit that has no brand what so ever. the dudes I bought it off of were talking circles when asked about the isssue. But the solution was to change the CAN BUS to 123 accord. That was the one that worked for my 03 accord dual zone climate control settings. As far as the conversion to Fahrenheit that’s easy F = C*2+30
Edit: I didn’t have to change any wires. And that wouldn’t have helped either way. My wires are white, pink, black and yellow
Nepolog said:
I made an account just to say Thank you so much for this post Pjottrr, I was going crazy because I bought an off brand, off brand cheap Chinese unit that has no brand what so ever. the dudes I bought it off of were talking circles when asked about the isssue. But the solution was to change the CAN BUS to 123 accord. That was the one that worked for my 03 accord dual zone climate control settings. As far as the conversion to Fahrenheit that’s easy F = C*2+30
Edit: I didn’t have to change any wires. And that wouldn’t have helped either way. My wires are white, pink, black and yellow
Click to expand...
Click to collapse
no problem,
The reason i posted this was because in the end, the issues i faced probably only came down to the cable + correct canbus seting..... i'd tyhought i'd probably wouldn't be the only one facing this problem.
anyway, I'm glad my post helped you
pjottrr said:
no problem,
The reason i posted this was because in the end, the issues i faced probably only came down to the cable + correct canbus seting..... i'd tyhought i'd probably wouldn't be the only one facing this problem.
anyway, I'm glad my post helped you
Click to expand...
Click to collapse
Does the climate info pop up on its own now and then for you?
RazorBlade_91 said:
Does the climate info pop up on its own now and then for you?
Click to expand...
Click to collapse
It does for me. Only minor downside eoutside temp ins in Chinese and nothing’s in english
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
hi all
i bought one of these to replace a px5 unit in my 2012 ford focus. but with the ts10 the front parking sensors and the auto park feature do not work. the rear sensors work . front and rear senors and autopark is factory fitted. i have done an update from system. now at mcu version;-ts10v.1.1-100-414-a4c695-210818(mm031)
system version:-ts10.1.2_20210819.162244_tw1-v2
can version: s1s2fdf10a-210430
i have tried asking the seller, but they just keep asking for more information (what more can i give them?)
does anyone here have any ideas please. ?
would a custom rom help? different canbus module or software? ( i have tried using the canbus from the px5 unit but no joy )
or even just settings im missing?
any help please. thank you in advance
Robbo20236 said:
hi all
i bought one of these to replace a px5 unit in my 2012 ford focus. but with the ts10 the front parking sensors and the auto park feature do not work. the rear sensors work . front and rear senors and autopark is factory fitted. i have done an update from system. now at mcu version;-ts10v.1.1-100-414-a4c695-210818(mm031)
system version:-ts10.1.2_20210819.162244_tw1-v2
can version: s1s2fdf10a-210430
i have tried asking the seller, but they just keep asking for more information (what more can i give them?)
does anyone here have any ideas please. ?
would a custom rom help? different canbus module or software? ( i have tried using the canbus from the px5 unit but no joy )
or even just settings im missing?
any help please. thank you in advance
Click to expand...
Click to collapse
Hi,
Did you get any answers? Have same problem unfortunately.
No I havnt. Do you have a focus as well? Have you better luck asking the seller? I had another go using the csn bus box from my pc5 unit and the front sensors do work but there is no beeping as the px5 unit had a speaker wired to the harness an the ts10 unit has an internal speaker in the canbus box. But nothing when I try the Autopark feature. Still hoping some kind soul on here will have an answer
Yup, Focus as well. I did get some information over the Internet that cars "well equiped" have this issue, although I'm still waitin for my seller to respond in this matter. We are trying to fix it for a week now.
I did ordered new canbus (Rainse). I read that this manufacturer has better software, will try this but need to wait about 2 weeks unfortunately.
For now I get new software TS10.1.2_20211023.140539_TW1-V2.rar
But there's another problem with it, meaning my touch is "again" twisted 180 degrees..
Will keep you posted if we figure out something in this matter.
So here's a question surley someone can answer. And excuse me if it sounds stupid but is the software for things like parking sensors and autopark all done on the canbus unit? Even the onscreen overlay?. If so then the whole issue is down to the canbus unit then?
All shoud be going (translated) via canbus, although I did noticed, that with new system update my rear sensors now working correctly
Edit:
Screen touch is fixed, but still one of the butons of fixed menu (bottom), doesn't work. Don't know how to fix this dough.
Still waiting for our "friend" to response.
so if all is going through the canbus unit. shouldnt the one from my px5 unit work with this one?. everything on the px5 unit worked ok . parking sensors, auto park. air con.
i may try again the weeekend ,cant remember if both front and rear parking sensors worked . but for sure there was no autopark or any beeping as the ts10 canus has a built in speaker where the px5 unit had a speaker wired to the wiring loom.
so do you think the wiring loom from the px5 unit could be adapted to work with the ts10 then maybe all the sensors would work?
picture is of the px5 canbus unit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Much appreciate if you can check it. Mine new (different) canbus is on the way to me. Ill try on my side.
Auto parking feature for sure is working, but there are no indicators what so ever (tried couple of times).
My actual canbus:
thats the same as i got with my ts10.
so you saying your auto park is working but with no on screen display?
i tried with mine but was to scared to try it as there was no display to tell me what to do
Robbo20236 said:
thats the same as i got with my ts10.
so you saying your auto park is working but with no on screen display?
i tried with mine but was to scared to try it as there was no display to tell me what to do
Click to expand...
Click to collapse
Yup, it's working.
Check this
Made this chaotic video couple days ago.
Hi,
Since you didn't response on my previous post, I can share my discovery.
I replaced canbus which came with original unit to a new one (picture attached), and guess what... Now everything is working!
I have AC control from screen it self, front parking sensors are working, like they should and rear ones are more sensitive now.
Finally I can enjoy my purchase!
You are a hero. I was contemplating trying to wire my canbus from my px5 unit into this one. Now just need to find where to purchase that one. I take it the autopark feature works as well?
I don't suppose you have the link where you bought yours from?
Thank you
Robbo20236 said:
You are a hero. I was contemplating trying to wire my canbus from my px5 unit into this one. Now just need to find where to purchase that one. I take it the autopark feature works as well?
I don't suppose you have the link where you bought yours from?
Thank you
Click to expand...
Click to collapse
Of course I have:
Link
Edit:
Link should work now
Link isn't working but I think I've found one on aliexpress. Will message seller to check before I order. But thank you again. Hopefully this may help others as well
[email protected] said:
Yup, Focus as well. I did get some information over the Internet that cars "well equiped" have this issue, although I'm still waitin for my seller to respond in this matter. We are trying to fix it for a week now.
I did ordered new canbus (Rainse). I read that this manufacturer has better software, will try this but need to wait about 2 weeks unfortunately.
For now I get new software TS10.1.2_20211023.140539_TW1-V2.rar
But there's another problem with it, meaning my touch is "again" twisted 180 degrees..
Will keep you posted if we figure out something in this matter.
Click to expand...
Click to collapse
Hi, where did you dowloaded that firmware?
phenom_x4 said:
Hi, where did you dowloaded that firmware?
Click to expand...
Click to collapse
Hi,
Meaning firmware for canbus?
You can download firmware for canbus via head unit in factory settings.
(Old pictures attached)
[email protected] said:
Hi,
Meaning firmware for canbus?
You can download firmware for canbus via head unit in factory settings.
(Old pictures attached)
Click to expand...
Click to collapse
I mean ROM firmware. Hey, my radio looks different from yours. Why?
This can be changed in system settings as well (AC control off).
New ROM was provided by seller (if you want one, I need some time to upload it).
[email protected] said:
This can be changed in system settings as well (AC control off).
New ROM was provided by seller (if you want one, I need some time to upload it).
Click to expand...
Click to collapse
I have no ROM if need it to reinstall it if I broke something. If you can upload it I'll be much appreciate it
Don't know if you search something online, but if you need any information regarding "how to..", here's a good place for get more info:
Link
Firmware is also available to download in one of the folders.
Need to use translator sometimes
I recently purchased a new 7 inch android 10 head unit. Rockchip PX5 (Klyde). All are working very well except one thing. My original car stereo had volume knob (i think it is called rotary encoder). That volume knob was working perfectly, until the time i installed the new head unit. After the installation it malfunctions a lot! I must turn it 4-5 clicks with specific speed just to increase or decrease volume by 1. If i turn it more quickly it doesn't do anything. I went to the shop i got it, he pulled out the unit, but he told me that i had put all the wires correctly. He didn't have any solution to my problem. 2-3 wires haven't been installed and left in the box, but the labels on them say camera,aux.... staff like that. They dont say something like volume knob or rotary encoder.
Any help would be greatly appreciated. I don't know what to do!! (sorry for bad english)
The seller needs to get in contact with Klyde (seems to be an official reseller, I hope) and ask for help.
As you did not buy it at Klyde yourself, Klyde would not be able to help.
The seller is the one who is responsible.
You won´t find any help here, because this is really car dependent and needs to be analyzed by Klyde in combination with the reseller.
paralias7 said:
I recently purchased a new 7 inch android 10 head unit. Rockchip PX5 (Klyde). All are working very well except one thing. My original car stereo had volume knob (i think it is called rotary encoder). That volume knob was working perfectly, until the time i installed the new head unit. After the installation it malfunctions a lot! I must turn it 4-5 clicks with specific speed just to increase or decrease volume by 1. If i turn it more quickly it doesn't do anything. I went to the shop i got it, he pulled out the unit, but he told me that i had put all the wires correctly. He didn't have any solution to my problem. 2-3 wires haven't been installed and left in the box, but the labels on them say camera,aux.... staff like that. They dont say something like volume knob or rotary encoder.
Any help would be greatly appreciated. I don't know what to do!! (sorry for bad english)
Click to expand...
Click to collapse
Seller or one of his engineers must have a zip file / files to import volume and other knob functions to factory settings in order to work. Every device has his own update files that are imported thru factory settings / KEY / BUTTON menu (not touch learning - this is for touch screen functions).
When given specific file unzip them (it will be a few files inside) put on USB drive and plug in device then go to factory settings / KEY and press import, after import restart device and that's it. It should work
Anton TNT said:
Seller or one of his engineers must have a zip file / files to import volume and other knob functions to factory settings in order to work. Every device has his own update files that are imported thru factory settings / KEY / BUTTON menu (not touch learning - this is for touch screen functions).
When given specific file unzip them (it will be a few files inside) put on USB drive and plug in device then go to factory settings / KEY and press import, after import restart device and that's it. It should work
Click to expand...
Click to collapse
I have had many calls with the seller. He never said to me that he has these files. I think that if he had them, he would have told me...
paralias7 said:
I have had many calls with the seller. He never said to me that he has these files. I think that if he had them, he would have told me...
Click to expand...
Click to collapse
I already told you, that the seller needs to get in contact with Klyde, explain the issue and ask for getting a fix.
rigattoni said:
I already told you, that the seller needs to get in contact with Klyde, explain the issue and ask for getting a fix.
Click to expand...
Click to collapse
If i tell my seller to speak with Klyde he will laugh at me. He doesn't know him. I don't know him either! I recently learned that these unit are from one person named Klyde. The shop i bought it takes these units from another company named cadence that imports head units from outside greece. Anyway i spoke with cadence too, and they yelled at me because i installed the update. And they said i lost warranty because of that.
I will try to find the solution on my own..
I cant deal with these any more....
Please take an image of your factory settings and every menu in it please...
Anton TNT said:
Please take an image of your factory settings and every menu in it please...
Click to expand...
Click to collapse
I will do it and upload them tomorrow. Thanks for the help.
paralias7 said:
I will do it and upload them tomorrow. Thanks for the help.
Click to expand...
Click to collapse
That will not help, because:
This knob is managed by the CAN bus and delivers a square wave which has to be interpreted by the CAN box.
If this is not fully supported, or wrong implemented (Even if the wrong CAN box settings are chosen) the volume knob does not react as expected.
2 things can help:
1. Check the CAN settings in the head unit. I fear you have the right settings, but the CAN box software is messed up. Escalate that to the seller (who ever this is) and if they are not able to provide that, give the unit back to them. You won´t get lucky with it.
2. Get the right CAN box for your special car (Citroen C4) from your seller with the right parameters configured.
To be mentioned here again: These French cars are quite difficult, because the manufacture often changes hard- and software during the production time.
I would try to get in contact with Klyde. If you tell them the whole story, may be they can help to sell the right CAN box for your special car.
I will upload photos tomorrow from the can bus settings etc, so you can see for yourself. I will call the seller one more time tomorrow. We'll see...
Anton TNT said:
Please take an image of your factory settings and every menu in it please...
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There is a picture shown where you read "Canbus key study".
Did you already tried to setup the key of the steering wheel and the volume knob in there?
rigattoni said:
There is a picture shown where you read "Canbus key study".
Did you already tried to setup the key of the steering wheel and the volume knob in there?
Click to expand...
Click to collapse
Yes i already tried. It didn't change anything. I think that's because the volume knob already has the command to increase or decrease volume, but mulfanctions. What i did yesterday was to remap two keys ( the up and down arrows) for volume up and down. But i am still missing the good old knob....