Hello guys, I'm desperate looking for help, I recently changed my firmware to Android 7.0 official from china, but it turns out that from china not with google play installed, I've tried to root the gapps but it still doesn't work. now i want to install the firmaware from china but only from hong kong that comes with google play. It turns out that I already downloaded several odin, several firmware but still giving error.
The error that appears in odin is this:
<ID: 0/005> Added !!
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> Checking MD5 finished Sucessfully ..
<OSM> Leave CS ..
<ID: 0/005> Odin engine v (ID: 3.1301) ..
<ID: 0/005> File analysis ..
<ID: 0/005> Total Binary size: 3408 M
<ID: 0/005> SetupConnection ..
<ID: 0/005> Initialzation ..
<ID: 0/005> Get PIT for mapping ..
<ID: 0/005> Firmware update start ..
<ID: 0/005> NAND Write Start !!
<ID: 0/005> SingleDownload.
<ID: 0/005> sboot.bin
<ID: 0/005> FAIL!
<ID: 0/005>
<ID: 0/005> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone in dwonload mode, the following error occurs.
SECURE CHECK FAIL: (BOOTLOADER)
Please help me guys
Related
Good afternoon guys.
I'm trying flashing one of these roms I9505XXUFNA1 / I9505ZTOEMKE and I am not getting flashing.
This is what appears on the Odin. (v3.04 and v3.09.3)
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> I9505VJUEMKE_I9505ZTOEMKE_I9505VJUEMKE_HOME.tar.md5 is valid .
<OSM> Checking MD5 finished sucessfully ..
<OSM> Leave CS ..
<ID:0/006> Odin v.3 engine ( ID : 6 ) ..
<ID:0/006> File analysis ..
<ID:0/006> SetupConnection ..
<ID:0/006> Initialzation ..
<ID:0/006> Get PIT for mapping ..
<ID:0/006> Firmware update start ..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start !
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006>
<ID:0/006> Complete ( Write) operation failed .
Added <ID:0/006> !
<OSM> All threads completed . ( succeed 0 / failed 1 )
SW REV . Check Fail: Fused : 4 , Binary : 3
Click to expand...
Click to collapse
I 'm just wanting to install my previous rom, back to factory default and make the changes.
Nobody knows inform me?
hello to all
I ask for help !
I was returning from 4.2 to cyanogen stable rom on my stock S4 GT- I9505 . But as soon as I launched the flash with odin I received this log
Added <ID:0/003> !
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> I9505XXUDMH5_I9505OXADMH5_I9505XXUDMH5_HOME.tar.md5 is valid .
<OSM> Checking MD5 finished sucessfully ..
<OSM> Leave CS ..
<ID:0/003> Odin v.3 engine ( ID: 3 ) ..
<ID:0/003> File analysis ..
<ID:0/003> SetupConnection ..
<ID:0/003> Initialzation ..
<ID:0/003> Get PIT for mapping ..
<ID:0/003> Firmware update start ..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start !
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! ( Auth )
<OSM> All threads completed. ( succeed 0 / failed 1 )
Help me ! now the phone is not part of me more , tell me " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE . PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN ."
I tried to change usb port , usb cable , computer and version of odin .
Thanks to all
another thing,
in the "dowload mode" display of my phone i read in red:
SW REW. CHECK FAIL : FUSED : 3 , BINARY : 2
Looks to me like you've already updated to official 4.3 yes?
At this point, if ever, you cannot flash older version like 4.2.2 once you've already updated to 4.3.
I belive the only way to go back is via custom recovery and either pre-rooted stock rom or custom rom.
Sent from my GT-I9505 using xda app-developers app
Hello,
I'm currently on simplerom. I want to flash original stock lollipop. But when using odin v3.10.6 I get this message:
Enter CS for MD5 <OSM> ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5 is valid.
Checking MD5 finished Sucessfully <OSM> ..
<OSM> Leave CS ..
<ID:0/011> Odin v.3 engine (ID: 11) ..
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can you guys help me ?
Thanks in advance.
flash by Odin this kernel SpaceX-Kernel-v0.2_N910C(Dev).tar.md5 and after that flash any rom you whant also by Odin
if you have an backup ....restore your backup , flash the kernel and after that flash by Odin the rom you want
Good Luck
Vytkaz said:
Hello,
I'm currently on simplerom. I want to flash original stock lollipop. But when using odin v3.10.6 I get this message:
Enter CS for MD5 <OSM> ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5 is valid.
Checking MD5 finished Sucessfully <OSM> ..
<OSM> Leave CS ..
<ID:0/011> Odin v.3 engine (ID: 11) ..
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can you guys help me ?
Thanks in advance.
Click to expand...
Click to collapse
Thats not for Note 4. You're trying to flash note 10.1 tablet firmware. Check your model then search for the adequate firmware either on sammobile.com/firmwares or here on xda.
Also wrong section.
Styrke said:
Thats not for Note 4. You're trying to flash note 10.1 tablet firmware. Check your model then search for the adequate firmware either on sammobile.com/firmwares or here on xda.
Also wrong section.
Click to expand...
Click to collapse
Haha!
Hi guys.
I have a problem, my phone battery and load it only just started custom screen (not shown nor the logo of AT & T and Samsung) The Phone model: Samsung S4 Active I537 AT & T unlocked (purchased by Amazon). Bring it to a technician and informed me that it is the firmware, then using his footsteps on the forum I have tried to install your firmware 4.2.2 that was the one that had at the time of the problem and I could not, when trying to install the ROM me indicates this message in the ODIN:
<ID: 0/008> Added !!
<ID: 0/008> Odin engine v (ID: 3.1100) ..
<ID: 0/008> File analysis ..
<ID: 0/008> SetupConnection ..
<ID: 0/008> initialzation ..
<ID: 0/008> Get PIT for mapping ..
<ID: 0/008> Firmware update start ..
<ID: 0/008> SingleDownload.
<ID: 0/008> sbl2.mbn
<ID: 0/008> Write Start NAND !!
<ID: 0/008> FAIL! (Auth)
<ID: 0/008>
<ID: 0/008> Complete (Write) operation failed.
<OSM> All threads completed. (Succeed 0 / failed 1)
And in phone mode downloda the following:
Odin mode
Product name: SGH - I537
Current Binary: Custom
System Status: Custom
CSB-CONFIG-LSB: 0x30
Write Protection: Enable (in gray)
START (224, 1440)
CHECK FAIL SECURE: SBL2
Until there is in the installation, diganme guys can help me? I am that I shot 5 floor of my building and I lol 2 weeks without phone locating this problem.
I really need help with this guys and I apologize if this is not in the post area but it is the first thing I do.
regards
I have a note 4 sm-n910c, I want to downgrade from android 6 to 5.1.1, I download the 5.1.1 rom from sammobile.
And I also downloaded Odin.
What do I need to select in odin in order to downgrade to 5.1.1?is there any guide to it?
Thanks!!
just try it and got error, please help how to fix it!!
i searched alot at xda forum and google and didnt find an answer
Enter CS for MD5 <OSM> ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> XXXX.tar.md5 is valid.
Checking MD5 finished Sucessfully <OSM> ..
<OSM> Leave CS ..
<ID:0/011> Odin v.3 engine (ID: 11) ..
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)