Database Users

Fiat Bravo & Canbus messages

Hello!
I´ve recently got a Witson HU (MTCD 1.97a) with the Canbus adapter for my Fiat Bravo (2013).
The steering wheel controls function ok (vol up, vol down,...) but i´ve seen another HU displaying "door opened" or other msgs (displayed in center car display), overwritten on HU display that look like the ones that appear when you change volume...
I tried various canbus settings (i found 2 different for the Fiat Bravo) but neither of them works as aspected. One is ok for the steering wheel controls and the other does nothing. But again... no extra msgs on screen.
Is it ok like this? Maybe the canbus decoder only works for those msgs, and ignore the rest of the canbus data...
any ideas would be appreciated!! thanks in advance!
greetings from Argentina!

_javi_ said:
Hello!
I´ve recently got a Witson HU (MTCD 1.97a) with the Canbus adapter for my Fiat Bravo (2013).
The steering wheel controls function ok (vol up, vol down,...) but i´ve seen another HU displaying "door opened" or other msgs (displayed in center car display), overwritten on HU display that look like the ones that appear when you change volume...
I tried various canbus settings (i found 2 different for the Fiat Bravo) but neither of them works as aspected. One is ok for the steering wheel controls and the other does nothing. But again... no extra msgs on screen.
Is it ok like this? Maybe the canbus decoder only works for those msgs, and ignore the rest of the canbus data...
any ideas would be appreciated!! thanks in advance!
greetings from Argentina!
Click to expand...
Click to collapse
That feature doesnt necessarily work on all cars, look for an app like "Car settings" or "Car service" in the apps when you have it set on the 2 Fiat Bravo CAN Bus setting, if you cant find it anywhere, go through all apps, if you still cant find anything, then that feature is not supported. You could also try any other Fiat CAN Bus setting, or maybe Lancias, Alfa or even some Chrysler vehicles theyre all made by FCA so there is a possibility it may work, probably not but worth trying.
You could also try the menu on the car, I know on the Bravo you can control some stuff on the factory nav unit, if you didnt ahve nav in the car it may be a case of turning the feature on via the car before it will work.

After typos1 tip, i set the canbus mode to ALFA ROMEO. The display shows an overhead view of a car, with the doors or boot being opened. Great!!! BUT... i lost steering wheel controls. Bad!!
So i´ll wait for an OS update to fix this thing.
The calibration screen for steering wheel controls doesnt show any option, in any case.
thanks again!

_javi_ said:
After typos1 tip, i set the canbus mode to ALFA ROMEO. The display shows an overhead view of a car, with the doors or boot being opened. Great!!! BUT... i lost steering wheel controls. Bad!!
So i´ll wait for an OS update to fix this thing.
The calibration screen for steering wheel controls doesnt show any option, in any case.
thanks again!
Click to expand...
Click to collapse
Ah, thats annoying.
The OS has nothing to do with it, its the MCU that deals with this sort of stuff, so an OS update for wont help, an MCU update may do IF they add full support for the Bravo and theres no guarantee that they will.
Some cars have CAN Bus but use resistive SWC (my Alfa is like this, but some Alfas do have CAN Bus SWC) which could explain it.
There may be a way round it if you buy an SWC adapter for your car. These headunits supposedly use the same SWC protocol as Pioneer, so if you got a Pioneer/Fiat Bravo SWC adapter, disconnected the 2 SWC wires from your CAN Bus box and attached them to the SWC adapter it would convert the CAN Bus SWC signal from your car into resistive so the stereo can understand them. AFAIK this has not been done before but it should work.
EDIT : didnt spot the bit about the SWC calibration not showing up, damn, I guess you could extract the SWC app using the app "APKextractor" and see if it installs when the stereo is in Alfa Romeo CAN Bus mode.

typos1 said:
EDIT : didnt spot the bit about the SWC calibration not showing up, damn, I guess you could extract the SWC app using the app "APKextractor" and see if it installs when the stereo is in Alfa Romeo CAN Bus mode.
Click to expand...
Click to collapse
browsing other threads i saw there are users with the same issue. SWC app shows just a blank screen (with save and reset buttons on top).
I´m still studying this (among other things... the mtcd HU is nice.. but it looks like it needs polishing)

hi, is your witson still working?

New Android 7.1.1 PX3 Unit from BonRoad - Any Info or Feedback?

https://www.aliexpress.com/store/pr...32699671881.html?spm=2114.12010612.0.0.KbDCzA
The UI and other specs are very similar to the HotAudio test preview (thread here). Has anyone had a chance to get their hands on one of these yet? I'm deciding between this or a Joying unit.
Any input is appreciated!

PX3 RK3188 Android 7.1.1 DVD VW GPS 2G ram
Just received and installed this Head unit in my vw touran 2004.
It looks like the specifications are the same : https://fr.aliexpress.com/item/Pure...32582906631.html?spm=2114.13010608.0.0.UFTkAD
The unit is a Bonroad C1120801A4/A5 (RK3188 Android 7.1.1 Lecteur DVD de Voiture pour Octavia Fabia Praktik EOS GPS Navigation Avec 1024*600 HD 8 "
So far, i'm satisfied with the unit :
- Radio is now working and stable .RDS works fine (with the last DCMU update). (You need to put a double fakkra antenna plug to get the radio stable on vw cars)
- GPS IGo is fine but not in French, Waze great
- canbus is functional
- Wifi rear camera ok
- BT external micro (mono) installed, i need to shout/YELL (it is an issue...)
When calling, both mic works (front mic and ext. roof mic)
google voice research unusable
I'm waiting for documentation from the supplier as there were no instructions in the box.
Do not hesitate, if you need more informations, pictures and tests. :good:
I tried Kingo root but it failed.

I also bought a car radio on aliexpress similar to yours. Px3 cortex a9 for ford focus c-max.
I have exactly the same worries as you with the microphone, the one integrated in the facade I have to stick my mouth on and scream.
The one who plugs externally is the same thing.
Many people talk about a worry with frequencies that are not the same in china and here
300-3400 for china
50-7400 for others
If you can root your device you can change the frequencies with Pimp my rom.
Personally I can not root it.

Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?

wankun said:
Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?
Click to expand...
Click to collapse
About 15 to 20 seconds to boot. For sleep functions, I have nightlight or 15s 30s 1mns ect ...

I've the same unit but it doesn't detect OBDII adapter. Any solution?

After trying everything to get the microphone that works for the handsfree kit, I decided to cut the 4th leg of the bluetooth module and solder a mono microphone directly on it. This was my last option because I did not have the c32 connector. This has been a success. People hear me very well now.

I have ordered this one - https://www.aliexpress.com/item/4-C...32691433062.html?spm=a2g0s.9042311.0.0.MbBrvn. Waiting for the the item to arrive. The seller would ship it on 17 July 2017 (Monday).
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
stanley 00 said:
I tried Kingo root but it failed.
Click to expand...
Click to collapse
Can you try the following and see if this gives you root access:
Goto factory settings and instead of typing 126 type *#hct#root#
This may give you temporary root access. Now you can install supersu or magisk to make the root permanent.
Note: I don't have this device or have not used any other Android HU; so I have not tried the steps mentioned above. I found this on the internet. Please try and let us know the result.
Cheers,
Rahul U S

Is your Bluetooth scanning OBDII with this ROM ?

S.Rahus
i tried your password to root but it does not work
" Goto factory settings and instead of typing 126 type *#hct#root# "
Stan

Anyone managed to fix the bad Bluetooth call quality? Any luck with getting root access?
Cheers,
Rahul U S

Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.

Forsaken2703 said:
Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.
Click to expand...
Click to collapse
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Thanks in advance!
Cheers,
Rahul U S

s.rahus said:
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Click to expand...
Click to collapse
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1

corolla E12 2din model
I have problems with the sound by hands free, to my listen very low, my unit is the MTCD_XRC_V2.54a_1 with android 7.1.2 ... is there any possibility to get down to version 5 of android?

Forsaken2703 said:
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1
Click to expand...
Click to collapse
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.

[email protected] said:
Is your Bluetooth scanning OBDII with this ROM ?
Click to expand...
Click to collapse
zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Try the latest XRC version 2.54. Please find the attachment.

zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Well you're right, if I have the auto sleep option enabled, but programs like Radardroid can not start automatically with the radio, I always have to start them manually.

Hi everyone!
I have a similar unit.
I think that the problem is with android version. In our case 7.1.1.
I had a problem with my OBDII reader and I updated my unit to 7.1.2 and fix it
Now with 7.1.2 I have the same problem with microphone and also I have a problem with USB cameras. Only the DVR app can connect with but only the first time. If I close the DVR app and open it again, camera dont work.
I want to use the USB front camera with Mapillary and iOnRoad but I cant.
Any idea?
Where can I donwload a previos android version? for example 5.1.1 or 6 perhaps its would fix the problems.
Thanks!

I've had a Hizpo 7" no dvd with buttons mcu xrc 2.54 android 7.1.2 2gb 16gb for a week. Came this way so I can't say about previous versions.
My bluetooth microphones (both) work fine for me, calls hear me fine. Even just the internal mic seems good.
I haven't had any bluetooth connection problems.
Android does not see any microphone, there is no speech input in keyboard settings, google voice search hears nothing. Voice recorder apps hear nothing.
Tried a usb mic but that did nothing.
Can't get usb camera to work for DVR. RCA CVI cam works in DVR but doesn't record, does not work in FCAM app however, though rear does.
OBDII worked fine when I first tried it, haven't messed with it since.
Display clear and good.
Haven't seen any bog, even when running nav, audio, video etc.
Audio is so so, lots of noise. Radio reception seems great and RDS works too. Needs an amp.
Wifi reception is great, just a little antenna on the back.
I really like it but for the lack of voice search. It's really fast, I have a load of apps and still tons of space. Runs everything so far.
Nearly instant on, radio is playing in under 2 sec (probably 1).
GPS works good so far, finds my location in maybe 10 sec or less usually. I haven't been thru Pittsburgh yet to say how well it keep its signal.
I just got MTCtools and dialer and will start messing with them tomorrow, hopefully I can get a mic input to android and get voice working, then this will be really great!

BMW 10.25" HU Android 7.1 px3 MCU update issue.

Hello,
These units are available for E83, E84, F25, F30 and other BMW models, share the same hardware and only base, connectors, harnesses and MCU versions change according to specific model. They are probably produced from one factory but u will them around with brands like: MEKEDE, NAVIFFLY, DASAITA, UGODE, AVIN etc. So there are CCC, CIC, and NBT MCU versions. Mine is for E83 X3 and came with a CIC version. Aliexpress sellers support is zero... Anyway I need desperately to update MCU and I cannot through normal menu way. It just recognises the update file, suppose to start procedure and then u wait forever and nothing happens. It is a common issue lately since it is being discussed many times at f30bimmerpost forum. Can some expert guy pls suggest a different procedure like renaming the file and force update it somehow during booting maybe??
the file is in an mcuupdate.bin form.
Thanks a lot!

Ducvfr said:
Hello,
These units are available for E83, E84, F25, F30 and other BMW models, share the same hardware and only base, connectors, harnesses and MCU versions change according to specific model. They are probably produced from one factory but u will them around with brands like: MEKEDE, NAVIFFLY, DASAITA, UGODE, AVIN etc. So there are CCC, CIC, and NBT MCU versions. Mine is for E83 X3 and came with a CIC version. Aliexpress sellers support is zero... Anyway I need desperately to update MCU and I cannot through normal menu way. It just recognises the update file, suppose to start procedure and then u wait forever and nothing happens. It is a common issue lately since it is being discussed many times at f30bimmerpost forum. Can some expert guy pls suggest a different procedure like renaming the file and force update it somehow during booting maybe??
the file is in an mcuupdate.bin form.
Thanks a lot!
Click to expand...
Click to collapse
I have the same issue. When i plug the usb with mpuupdate.bin in usb slot nothing happens.

Did you use sdcard? try

d1egulopes said:
Did you use sdcard? try
Click to expand...
Click to collapse
Of cource I did, no difference.

This is really annoying I am having the same problem. There must be a way to force install mcu like the firmware. Maybe the file needs a different name or header. I don't know. Hope someone has a suggestion.

similar issue here ..
and yes I hit some search button..
having the 10.25,
installed and first it did work. (with ccc head unit)
accidentally hit a update wile first time opening file explorer, that one changed my fortune.
I think I am now in cic or such...
cant get into my native system.
idrive button does not take enter, but idrive can be used to go back to android (holding it for 5 sec)
so I stuck in nowhere (cant even change audio/aux)
so how can I get it back to ccc ?
am guess I need a mcu file, where can I get one ?
cheers
and thanks form Germany
Vollthrottle

Vollthrottle said:
similar issue here ..
and yes I hit some search button..
having the 10.25,
installed and first it did work. (with ccc head unit)
accidentally hit a update wile first time opening file explorer, that one changed my fortune.
I think I am now in cic or such...
cant get into my native system.
idrive button does not take enter, but idrive can be used to go back to android (holding it for 5 sec)
so I stuck in nowhere (cant even change audio/aux)
so how can I get it back to ccc ?
am guess I need a mcu file, where can I get one ?
cheers
and thanks form Germany
Vollthrottle
Click to expand...
Click to collapse
Now I got everything.
new os img
new mcu update . bin
no fix
got second unit all frehs and new
no change. can bus commands from ifdrive controller do not work.
there have been some posts reporting the same issue (idrive controller hangs) but there is no solution posted.
my guess > something wrong inside mcu settings.

Hello,
Same issue here (but with 10.25" PX6 android 8.1 CCC idrive).
- idrive works on android side.
- idrive does not work on original OEM screen (BMW menu).
The seller asked me to update mcu twice, nothing has changed (did not validate the reception of my order until tested, so no payment from Aliexpress to seller until it works ...).
I did not tried to full update (did not find PX6.img file on the net, and from what people are reporting, it does not change a thing).
One thing I have noticed :
- when on android idrive works
- then when switch to BMW menu (click on "Car Info"), if I try actions, nothing happens.
- BUT, when I go back to android (press menu 3secs), the android cursor has moved !
This means that idrive actions are NOT forwarded to CCC controller, AND interpreted inside android !
It seems so stupid, but this little bug ruins the possibility to use this screen at all : if we cannot go on the BMW menu to set the correct outputs and shortcut, it is totally useless.
Vollthrottle said:
Now I got everything.
new os img
new mcu update . bin
no fix
got second unit all frehs and new
no change. can bus commands from ifdrive controller do not work.
there have been some posts reporting the same issue (idrive controller hangs) but there is no solution posted.
my guess > something wrong inside mcu settings.
Click to expand...
Click to collapse

BMW 10.25" HU Android 7.1 px3 MCU update issue
yes very annoying.
maybe time to hang our post one line up and make it a new thread!?
base info:
android 8.1
image: px6
mcu / . 023042bGS-ccc-hw8-190401 (B1280_170325)

I have exactly the same issue. Idrive controller works for Android menu but when entering car info the idrive controller doesn't work. When I connect my original CCC screen and the android together entering car info the idrive controller works on the old idrive system. Changing the CCC screen cable to route to the android screen again still gives me the non working idrive controller. Seems there is something wrong with either the CCC screen cable that came with the unit or the firmware. Did someone already got a fix? It is really annoying.
Thanks

same here
Hello,
Same here for me, 2005 e87 CCC car with idrive, Android 8.1 Px6 unit : idrive moves not working on BMW OEM menu when using new screen.
To be more precise : the moves / events made on the idrive when in original BMW menu does not do anything on the original interface, BUT, are interpreted on the android side!
The Mcu firmware does not seem to redirect correctly the CAN bus idrive knob messages to the CCC controller.
If someone has some infos on the Mcu source code used... It would help...
At least I know we are not alone and this seems to be CCC with 8.1 related...
Regards all

ulysse31_revient said:
Hello,
Same here for me, 2005 e87 CCC car with idrive, Android 8.1 Px6 unit : idrive moves not working on BMW OEM menu when using new screen.
To be more precise : the moves / events made on the idrive when in original BMW menu does not do anything on the original interface, BUT, are interpreted on the android side!
The Mcu firmware does not seem to redirect correctly the CAN bus idrive knob messages to the CCC controller.
If someone has some infos on the Mcu source code used... It would help...
At least I know we are not alone and this seems to be CCC with 8.1 related...
Regards all
Click to expand...
Click to collapse
I am not sure whether it has to do with the MCU.. When i connect the android unit but connect the lvds cable from the radio unit to the original screen switching to car info on the android unit gives me the ability to control the original ccc screen with the idrive button. It seems like the MCU works correct than right? One thing i have noticed is that the original lvds cable (that plugs in to the radio unit and to the screen) has a metal harness (i think for the ground) . The cable that i got with the android unit doesn't have a metal harness but on the HU android side the connector seems to have a ground connector, could it just be that the cable is not correct? The ground of the radio unit should be connected to the metal side on the android HU cable? Do you have the same cable?
Here is a video where can see how the two screens together do work: (search on youtube for: "Idrive not working in android 10.25 car info" my username is pietklazen100) (sorry as a new member i am not allowed to post links yet)
The automatic aux switching works when entering video on the android HU and entering car info also lets me control the unit. The only thing that is different in this setup is the lvds cable...

ErikE87 said:
I have exactly the same issue. Idrive controller works for Android menu but when entering car info the idrive controller doesn't work. When I connect my original CCC screen and the android together entering car info the idrive controller works on the old idrive system. Changing the CCC screen cable to route to the android screen again still gives me the non working idrive controller. Seems there is something wrong with either the CCC screen cable that came with the unit or the firmware. Did someone already got a fix? It is really annoying.
Thanks
Click to expand...
Click to collapse
Exactly the same here.
I think this issue is clearly software-related.
Because if I press the button of the iDrive (in the original menu) nothing happens.
BUT when I push it to the sides (left, right, top, bottom) for longer, the 4 menus are changing.
But I cannot control anything there.
WTF is going on?
Where can I change to bloody config?
I can't listen to FM or anything else.

Factory setup code?
bthight said:
WTF is going on?
Where can I change to bloody config?
I can't listen to FM or anything else.
Click to expand...
Click to collapse
There is a factory settings menu item. However i dont know the code to enter it
This is where you change the idrive your car has.
I am looking for the code also. Would be happy with suggestions!!

1314
sanderbaks said:
There is a factory settings menu item. However i dont know the code to enter it
This is where you change the idrive your car has.
I am looking for the code also. Would be happy with suggestions!!
Click to expand...
Click to collapse
code is 1314

Code
seaman5705 said:
code is 1314
Click to expand...
Click to collapse
That code is not correct for me. Thanks for the feed back!
Any other codes are appreciated!

Ducvfr said:
Hello,
These units are available for E83, E84, F25, F30 and other BMW models, share the same hardware and only base, connectors, harnesses and MCU versions change according to specific model. They are probably produced from one factory but u will them around with brands like: MEKEDE, NAVIFFLY, DASAITA, UGODE, AVIN etc. So there are CCC, CIC, and NBT MCU versions. Mine is for E83 X3 and came with a CIC version. Aliexpress sellers support is zero... Anyway I need desperately to update MCU and I cannot through normal menu way. It just recognises the update file, suppose to start procedure and then u wait forever and nothing happens. It is a common issue lately since it is being discussed many times at f30bimmerpost forum. Can some expert guy pls suggest a different procedure like renaming the file and force update it somehow during booting maybe??
the file is in an mcuupdate.bin form.
Thanks a lot!
Click to expand...
Click to collapse
Hello Ducvfr,
The parking sensor is working for you in rear camera screen ? I means you can see the PDC radar in the right hand side.
Did you try Picture in Picture function ? For exemple, can you see youtube on rear camera view ?

sanderbaks said:
That code is not correct for me. Thanks for the feed back!
Any other codes are appreciated!
Click to expand...
Click to collapse
Did you find out what the code is?

Should be 1314

sanderbaks said:
Factory setup code?
There is a factory settings menu item. However i dont know the code to enter it
This is where you change the idrive your car has.
I am looking for the code also. Would be happy with suggestions!!
Click to expand...
Click to collapse
code is 1314 if you still need

Bosion Head Unit PX6 Android 10, 10" Display - Steering Wheel Controls

I have a Bosion PX6 Android 10 head unit.
My car is a Toyota Camry 2010 that came with a basic radio with XM radio and the Bosion 10" is an amazing upgrade for this car.
I am having a problem with the steering wheel controls as they don't set up with the button setup in the vehicle setup menu. I have tried many times with different settings.
The buttons on the left side of the steering wheel sort of work, the ones on the right do not seem to work at all.
In the hidden menu the various CANBUS settings don't really make any difference. There's like 10 different Toyota settings but all act the same as setting the Canbus to 0 (no Canbus?).
Anyone have any suggestions to resolve this?
I'm also looking for Bosion contact info or web page.

okay, the key is in the hidden menu or factory menu, you really need to search (depending in the canbus module you have) the car maker and model.
The canbus must show up and report the version.
The menu you find to setup the buttons in the android will never work.
hang in there you'll get it.

cowboypt said:
okay, the key is in the hidden menu or factory menu, you really need to search (depending in the canbus module you have) the car maker and model.
The canbus must show up and report the version.
The menu you find to setup the buttons in the android will never work.
hang in there you'll get it.
Click to expand...
Click to collapse
It sounds like you know what you are talking about. Fyi that I have been through the hidden menu. When you say the canbus must show up and report the version, I am not clear on what you mean. I have tried all 7 or 8 Toyota canbus configs and when I select any, the phone loads an associated program and reboots. None are really making any difference, always the left buttons kind of work and nothing on the right.
Any suggestions you have would really be appreciated.

Where you see the kernel version, os version and mcu version you must have also canbus version.
Can't show it to you now but you should see something like simple and version as 1.13.something
If nothing is there, the canbus config is not yet correct and radio can't detect correctly the canbus box. But you say that some steering wheel buttons are working. In this case. It seems to me that the canbus module in the radio is not yet updated to your car or the canbus box firmware is also not with a version where your car is supported. Contact the seller and claim if you still have time for it.

UPDATE: added aftermarket canbus box has corrected 90% of the buttons. The remaining button is the Voice button to issue voice commands to the phone. This is not a choice within the head unit button mapping. I suppose I should try a different car selection (?).

Anyone know if there is a website for Bosion for manuals and updates?

I don't think so :/ I've tried to get some answers from manufacturer but they aren't well informed, i think. Or they are not willing to tell a secret :/

rkrigsman said:
UPDATE: added aftermarket canbus box has corrected 90% of the buttons. The remaining button is the Voice button to issue voice commands to the phone. This is not a choice within the head unit button mapping. I suppose I should try a different car selection (?).
Click to expand...
Click to collapse
what can bus did you buy? for what car?

The car was a Toyota Camry.
kontosoglou said:
what can bus did you buy? for what car?
Click to expand...
Click to collapse

Sorry for the delay, I have an aftermarket box from PAC called SW1-RC-1 which works 95% perfectly and allowed me to program the buttons as normal.
I have a 2010 Toyota Camry.
The only issue is the Bosion PX6 Android "10" is that in the setup for the canbus within the head unit, there is no button to map to for the voice button to on the steering wheel. Seems like a very odd issue as the voice button is so normal and I'm still looking for an update or a way to find that button in settings.

Ts9 sp9853i_1h10_vmm mazda 6 2003

Hi,
The unit is THIS
I've got my unit, installed it, changed the info display from a facelift model to match the conections with the following diagram D1 , D2 and D3 .
The only issue is that the climate controls have a mind of their own, they change the setting to a/c auto, a/c eco, etc.
I talked to a guy that told me to change the car model from "machine settings" to solve the climate control, i entered a menu but it has everything in Chinese HERE .
In that menu the selected model is 04-15 mazda 6, in the CanBox category are a lot of i guess "firmwares". Should i take them one at a time?
What can i do to make it work? I also changed the climate control from a facelift model when other guy told me that could be a issue
More photos here and here and here from my install.
Thank you.

vlad_skz said:
Hi,
The unit is THIS
I've got my unit, installed it, changed the info display from a facelift model to match the conections with the following diagram D1 , D2 and D3 .
The only issue is that the climate controls have a mind of their own, they change the setting to a/c auto, a/c eco, etc.
I talked to a guy that told me to change the car model from "machine settings" to solve the climate control, i entered a menu but it has everything in Chinese HERE .
In that menu the selected model is 04-15 mazda 6, in the CanBox category are a lot of i guess "firmwares". Should i take them one at a time?
What can i do to make it work? I also changed the climate control from a facelift model when other guy told me that could be a issue
More photos here and here and here from my install.
Thank you.
Click to expand...
Click to collapse
Yes, you need to install one at time, the HU do an automatic reset and after that you check the functions; if everything it's ok you don't need to do nothing, if not, try other configuration.
By the way, you need to be connected to the wifi or gsm.

Yes, you need to install one at time, the HU do an automatic reset and after that you check the functions; if everything it's ok you don't need to do nothing, if not, try other configuration.
By the way, you need to be connected to the wifi or gsm.
Click to expand...
Click to collapse
I am connected to wifi, i tried anything that was my car model and close to my year, steering wheel buttons work everytime however the A/C commandsare still changing their own.