Greetings i have a sharp aquos R(605sh) that has gone in bootloop and doesnt start because of a software issue(systemui keeps stopping on bootup) so if anyone has a firmware or knows a way to reset this please guide.
anyone?? UP
No way without getting it started
You can't reset it with button dont get into recovery mode neither into download mode this phone suvk no rom no root no development at all
Maybe this can help k-tai*sharp*co*jp/support/developers/oss/shv39/index.html
UP
---------- Post added at 12:06 PM ---------- Previous post was at 11:58 AM ----------
https://k-tai.sharp.co.jp/support/developers/oss/aquos-r/index.html
This is for 605SH ... I still don't know how to flash these
Related
Help please guys totally new to this, i flashed bravox to my phone and today i was gonna flash cm7 but after trying to go into 2nd init defy and it didn't work (i went to stock recovery) i decided to reboot my phone (this is where it starts). That doesn't work, it just loads the motorola logo then powers off and continued to bootloop. So i tried to sbf it using rsd lite that worked and i reached the stage please manually power up this phone, so i try. The logo loads again and i saw the ripples so i think it got the phone back to original state but it still doesn't boot the only good is that it doesn't bootloop anymore
---------- Post added at 08:26 PM ---------- Previous post was at 08:12 PM ----------
it booted but i have no idea how to close this thread
Before you close it please let us know what you did, there are many new users here that will face this kind of problems in the future!!
How to hard reset Huawei tablet S7 when turn on it ask for about email nad password
any recovery or flashing method to remove this /////
I tried to upload the file you need, but it wont let me, pm me I will send it to you I had the same problem I will send you the file and instructions on how to get it done
Hi Sapperpipo, can you send me the hard reset procedure too? Pls PM me thanks!
Not sure if this will help:
http://wiki.modaco.com/index.php/Huawei_Firmware_S7
http://www.taskjohann.com/2011/11/factory-reset-for-huawei-s7-tablet.html
I have tried to use the quoted 2nd link, downloaded the dload file and used it. somehow on the middle of the installation process it stops and all the button lights start to blink faster than their initial frequency when the progress bar is going. i don't know what the fix is for this. i have a feeling that this can help me get back my lost 8gb internal SD if i would have been able to flash it successfully on my ideos7.
has anybody tried this already, would be happy to know.
Blinkers
Do not use battery. Use only power connector. First press back and power on and after a few sec leave power button. You should see a white bar. Leave Back button and disconnect charger. Keep stock firmware in external sdcard formatted to FAT32 under dload and make sure you have only unlmt.cfg and along with UPDATA.APP and upg.
Reconnect charger and press power on. If the flashing does not start try again. Fast blinking happened to me, say after 5 bars or may be 6. After rooting device I tried some mod and ended up in a mess. Had to start all over again. But it started and went thru properly after two tries.
After trying this a few times, My S7 keeps rebooting. not stable, need to find another Rom..
---------- Post added at 05:34 PM ---------- Previous post was at 05:15 PM ----------
Link to new berlarus rom S7 slim.
Gonna flash and see now.
http://www.mediafire.com/?r98ck9f0l2d46x2
Nish4 said:
After trying this a few times, My S7 keeps rebooting. not stable, need to find another Rom..
---------- Post added at 05:34 PM ---------- Previous post was at 05:15 PM ----------
Link to new berlarus rom S7 slim.
Gonna flash and see now.
http://www.mediafire.com/?r98ck9f0l2d46x2
Click to expand...
Click to collapse
So have u try dis,stable or what ?? result ??
After updating to marshmallow its stuck on boot screen.
led patter white,blue,yellow,yellow,blue,blue,green.
is it done for?..
cant go to fastboot mode it just stays on the menu. and is there a way to update the image through sd card
Did you check the blackberry help forums? Contact the Twitter support if you can't find your answer
---------- Post added at 03:21 AM ---------- Previous post was at 03:20 AM ----------
I'm trying to upload a picture but it seems to not work
---------- Post added at 03:25 AM ---------- Previous post was at 03:21 AM ----------
Are you stuck on the bootloader or three carrier screen?
me too stucked on BOOTLOADER SCREEN after update any solution?
Yesterday, I flashed stock 4.4 YU5510A(Yureka Plus) ROM to my AO5510(Yureka) which was not working in my phone. Display was flashing up. When i flashed my Stock CM12.1 to my phone using fastboot along with erase commands. Now when i boot up my phone it works fine until i switch off screen or proximity sensor puts screen off durning a active call, now when i turn on screen again touch dont work for lower portion of screen. It works on upper portion. If i restart phone it works fine until i again switch off screen.
Same in TWRP 2.8 touch works until i off screen
In twrp 3.0.0 touch not working
previously everything was fine
I tried everything
Flashing up every rom i got
CM11 CM12 CM12.1
got no solution
Help me please
I am living at long distance from my faimly, i need my phone to talk with them
Help !!!!!!!!!!!!!!!!
something like this
https://youtu.be/T1IZqA-verU
Same thing also hapeeing with me bro please help I have flashed the same thing and now my phone is not working if you got any solution give me
---------- Post added at 01:08 PM ---------- Previous post was at 01:07 PM ----------
I think I have to brick yureka and debrick after that
yureka touch screen problm
Same here I am also facing same problem plzzzz help.I think if we can erase each and every partation.then flash a very fresh flash ROM means format bootloader then the problem should solve.
No I have tried that and bricked my eureka we have to check our device at service center is this hardware or soft ware problem ??? You say have you tried to service center guys
---------- Post added at 06:43 PM ---------- Previous post was at 06:42 PM ----------
I have also unbricked and tried ygdt tool of coolpad
For flashing and SD emmc for booting in fastbootmode
I'm also having same issue.................
Hey there is a problem.. while updating the stock... from updates it was updating and suddenly it went totally black.. its not turning on .. only when i put to charge or connect to PC only that notification lights blinks continuously .. and my volume down button is not working. so i cant see that i can go to boot loader .. so is there any way to get it done???? and i didn't turn on the debug mode on also... please let me know if there is any way to turn on the device... and please let me know why the led lights blinking which is besides finger print sensor.. and also when i connect to PC sounds comes which says its connected.. and when i disconnect sounds comes of disconnection.. and if i hold the power key sounds come of disconnection and connecting ... and while connected to MOTO G4 PLUS i can see in device manger as in other device QHSUB_BULK & Unknown device ... help
There is a guide in the "guides section" for hard bricks
Sent from my Moto G4 using Tapatalk
---------- Post added at 10:46 PM ---------- Previous post was at 10:45 PM ----------
Try this https://r.tapatalk.com/shareLink?ur...share_tid=3657761&share_fid=3793&share_type=t
Sent from my Moto G4 using Tapatalk
Same here after reboot in recovery from stock sept + xposed nougat
---------- Post added at 04:18 PM ---------- Previous post was at 03:41 PM ----------
ccalixtro said:
Same here after reboot in recovery from stock sept + xposed nougat
Click to expand...
Click to collapse
Forget it, already fixed ir with that guide.
Im currently running Xposed Nougat on my phone, I am using Magisk's systemless version though, with ElementalX Kernel. I recommend experimenting with your phone a bit, try flashing elemental X then Xposed. Might work
There is an unbrick guide.. Use it! the bootloader got updated with the patch, therefore, if u downgrade bootloader and update it again, the phone will brick... Use it to unbrick and flash the latest stock!