After updating to marshmallow its stuck on boot screen.
led patter white,blue,yellow,yellow,blue,blue,green.
is it done for?..
cant go to fastboot mode it just stays on the menu. and is there a way to update the image through sd card
Did you check the blackberry help forums? Contact the Twitter support if you can't find your answer
---------- Post added at 03:21 AM ---------- Previous post was at 03:20 AM ----------
I'm trying to upload a picture but it seems to not work
---------- Post added at 03:25 AM ---------- Previous post was at 03:21 AM ----------
Are you stuck on the bootloader or three carrier screen?
me too stucked on BOOTLOADER SCREEN after update any solution?
Related
Help please guys totally new to this, i flashed bravox to my phone and today i was gonna flash cm7 but after trying to go into 2nd init defy and it didn't work (i went to stock recovery) i decided to reboot my phone (this is where it starts). That doesn't work, it just loads the motorola logo then powers off and continued to bootloop. So i tried to sbf it using rsd lite that worked and i reached the stage please manually power up this phone, so i try. The logo loads again and i saw the ripples so i think it got the phone back to original state but it still doesn't boot the only good is that it doesn't bootloop anymore
---------- Post added at 08:26 PM ---------- Previous post was at 08:12 PM ----------
it booted but i have no idea how to close this thread
Before you close it please let us know what you did, there are many new users here that will face this kind of problems in the future!!
Yesterday, I flashed stock 4.4 YU5510A(Yureka Plus) ROM to my AO5510(Yureka) which was not working in my phone. Display was flashing up. When i flashed my Stock CM12.1 to my phone using fastboot along with erase commands. Now when i boot up my phone it works fine until i switch off screen or proximity sensor puts screen off durning a active call, now when i turn on screen again touch dont work for lower portion of screen. It works on upper portion. If i restart phone it works fine until i again switch off screen.
Same in TWRP 2.8 touch works until i off screen
In twrp 3.0.0 touch not working
previously everything was fine
I tried everything
Flashing up every rom i got
CM11 CM12 CM12.1
got no solution
Help me please
I am living at long distance from my faimly, i need my phone to talk with them
Help !!!!!!!!!!!!!!!!
something like this
https://youtu.be/T1IZqA-verU
Same thing also hapeeing with me bro please help I have flashed the same thing and now my phone is not working if you got any solution give me
---------- Post added at 01:08 PM ---------- Previous post was at 01:07 PM ----------
I think I have to brick yureka and debrick after that
yureka touch screen problm
Same here I am also facing same problem plzzzz help.I think if we can erase each and every partation.then flash a very fresh flash ROM means format bootloader then the problem should solve.
No I have tried that and bricked my eureka we have to check our device at service center is this hardware or soft ware problem ??? You say have you tried to service center guys
---------- Post added at 06:43 PM ---------- Previous post was at 06:42 PM ----------
I have also unbricked and tried ygdt tool of coolpad
For flashing and SD emmc for booting in fastbootmode
I'm also having same issue.................
Hi everybody, I'm Tom and recently I wanted to flash a stock rom on my Lenovo Yoga Tab 3 YT3-X50F but I accidently flashed a YT3-850F instead of YT3-X50F and it completely messed up my tablet the screen is black but when I hold Power + Vol up it vibrates and restarts like it would normally, also the PC detects the tablet when i plug it in. But yeah as I said the screen is completely black and I don't know what to do I don't even know if I can boot into recovery mode when it's like this.... I really hope you guys can help me because I got this tab for my birthday and I don't want my parents to think I can't take care of my stuff.
Install fastboot drivers on your pc.
Start tablet in fastboot mode. Probably power on while holding volume up.
Download stock rom for your device.
On pc open cmd in folder where you have stock rom files issue these commands
Fastboot flash cache (cache.img)
Fastboot erase splash
Fastboot flash splash (splash.img)
Fastboot flash system (system.img)
Fastboot flash recovery (recovery.img)
Fastboot flash userdata (userdata.img)
Fastboot flash boot (boot.img)
Sent from my Nexus 6P using Tapatalk
---------- Post added at 06:51 PM ---------- Previous post was at 06:43 PM ----------
This of course will only work if your tablet is still functioning in fastboot mode. The fact it is recognized by the pc is a good start.
Sent from my Nexus 6P using Tapatalk
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
Infact this might not work unless you tablet has unlocked bootloader.
Sent from my Nexus 6P using Tapatalk
---------- Post added at 07:07 PM ---------- Previous post was at 06:55 PM ----------
Or look here
http://forum.gsmhosting.com/vbb/f958/how-flash-yt3-x50f-yoga-tab3-2127594/
Sent from my Nexus 6P using Tapatalk
l
Tom B. said:
Hi everybody, I'm Tom and recently I wanted to flash a stock rom on my Lenovo Yoga Tab 3 YT3-X50F but I accidently flashed a YT3-850F instead of YT3-X50F and it completely messed up my tablet the screen is black but when I hold Power + Vol up it vibrates and restarts like it would normally, also the PC detects the tablet when i plug it in. But yeah as I said the screen is completely black and I don't know what to do I don't even know if I can boot into recovery mode when it's like this.... I really hope you guys can help me because I got this tab for my birthday and I don't want my parents to think I can't take care of my stuff.
Click to expand...
Click to collapse
Try flashing the (correct) stock rom using sideloader , it worked for me
Here, this might help you
https://www.google.com/url?sa=t&sou...FjAEegQIDhAZ&usg=AOvVaw0MpWQ5J8E3oQGZfl-GLGKL
Hey there is a problem.. while updating the stock... from updates it was updating and suddenly it went totally black.. its not turning on .. only when i put to charge or connect to PC only that notification lights blinks continuously .. and my volume down button is not working. so i cant see that i can go to boot loader .. so is there any way to get it done???? and i didn't turn on the debug mode on also... please let me know if there is any way to turn on the device... and please let me know why the led lights blinking which is besides finger print sensor.. and also when i connect to PC sounds comes which says its connected.. and when i disconnect sounds comes of disconnection.. and if i hold the power key sounds come of disconnection and connecting ... and while connected to MOTO G4 PLUS i can see in device manger as in other device QHSUB_BULK & Unknown device ... help
There is a guide in the "guides section" for hard bricks
Sent from my Moto G4 using Tapatalk
---------- Post added at 10:46 PM ---------- Previous post was at 10:45 PM ----------
Try this https://r.tapatalk.com/shareLink?ur...share_tid=3657761&share_fid=3793&share_type=t
Sent from my Moto G4 using Tapatalk
Same here after reboot in recovery from stock sept + xposed nougat
---------- Post added at 04:18 PM ---------- Previous post was at 03:41 PM ----------
ccalixtro said:
Same here after reboot in recovery from stock sept + xposed nougat
Click to expand...
Click to collapse
Forget it, already fixed ir with that guide.
Im currently running Xposed Nougat on my phone, I am using Magisk's systemless version though, with ElementalX Kernel. I recommend experimenting with your phone a bit, try flashing elemental X then Xposed. Might work
There is an unbrick guide.. Use it! the bootloader got updated with the patch, therefore, if u downgrade bootloader and update it again, the phone will brick... Use it to unbrick and flash the latest stock!
Greetings i have a sharp aquos R(605sh) that has gone in bootloop and doesnt start because of a software issue(systemui keeps stopping on bootup) so if anyone has a firmware or knows a way to reset this please guide.
anyone?? UP
No way without getting it started
You can't reset it with button dont get into recovery mode neither into download mode this phone suvk no rom no root no development at all
Maybe this can help k-tai*sharp*co*jp/support/developers/oss/shv39/index.html
UP
---------- Post added at 12:06 PM ---------- Previous post was at 11:58 AM ----------
https://k-tai.sharp.co.jp/support/developers/oss/aquos-r/index.html
This is for 605SH ... I still don't know how to flash these