Hey guys.
I have a oneplus5 that is in the following state:
Display and touchscreen nonfunctional
rebootet (means, it is not unlocked and i cant unlock it since the screen is done)
not rootet
developer options not enabled.
unlock method is pattern
Im looking for a way to access a single foto that is on the device (not in cloud somewhere).
I allready tried to connect a mouse to the phone and input the pattern with that, but that doesnt seem to work. At least i tried for extended period of time and had no luck. i think the pattern doesnt recognize mouse input.
Are there any options left that I could try?
Destruction of the device IS an option. Is there a way to crack it open and access the storage that way?
Any help appreaciated.
Very peculiar stage now. Let me dig something if probable.
Related
Hello everyone
I've got a problem and I need your help. My Legend fell on the ground and now the glass and display are both broken. To access my device with adb, which I previously installed, I used DroidAtScreen. But recently I deactivated USB-Debugging eek, and now I can't enable it. I need to "recreate" every single step from the unlocked screen to Menu->Settings->Applications->Development->USB-Debugging. The first step (Menu->Settings) is easy and abvious, but I need the other ones.
Could some of you take some screenshots and upload them? I.e.:
1. Menu->Settings, then scroll down to bottom **Screenshot**
2. Scroll a little bit up until "Applications" reaches first entry **Screenshot**
3. Press first entry (=Applications) **Screenshot**
4. Press fourth entry (=Development) **Screenshot**
5. Press first entry (=USB-Debugging) *Screenshot**..
I know it may seem complicated, but it would be of tremendous help! My idea is to print out the images and lay them over the Legend to find my way to USB-Debugging
THANK YOU A LOT in advance!
memo9
Good thinking, you actually only need 4 screens, here you go...
Good luck replacing the screen! There's plently of material to work with in accesories section
If the digitiser (top glass) is broken i doubt your presses will be in the right place, I have a desire in front of me that has a crack in the top left corner of the digi and pressing "a" on the keyboard pull notification bar down
Thank you very much for the effort of taking the screenshots, but I couldn't access the settings.
The only question that remains is: Does the phone need to be in "charge only"-mode? Because right now, in fact I can access the SD-Card when mounted, so I may have to switch to charge only?
@bonesy: Thank you for the input, but the touchscreen seems to be working fine as I can turn on the phone and enter the PIN-code to unlock it, as well as call a number after opening the phone-application
ADB should work no matter what the mode...why weren't you able to access it?
I don't know... I followed all the steps, connected the phone to my Mac... all this several times, trying to press on the exact location... but haven't succeeded.
I have adb configured as well as DroidAtScreen running and also tried to access it with DDMS..., but when i use the command "adb devices" none is shown. I can access my SD-Card but can't use adb...
I may try again a few times but can't really think of any other alternative than to replace the screen, although I need to access my phone immediately.
Thanks again for all the fast answers and if anyone has an idea or some sort of walkthrough... I would appreciate it.
ADB wont work unless you are using a custom rom OR its selected already.
Maybe a USB port failure?
What do you mean? I have accessed my phone in this environment several times before, everything should be set up correctly. It may be a USB port failure, altough I have tried to plug it into other USB ports.
The only thing I'm struggling with right now is accessing the Debug-mode in the settings.
memo9 said:
What do you mean? I have accessed my phone in this environment several times before, everything should be set up correctly. It may be a USB port failure, altough I have tried to plug it into other USB ports.
The only thing I'm struggling with right now is accessing the Debug-mode in the settings.
Click to expand...
Click to collapse
Ah i see, i meant the phones usb port... Could be 1 pin failed on it stopping certain things working?
Doesn't seem to be the problem since I can mount the phone and access the SD-card, but thanks anyway.
LGD800 AT&T
Just dropped it and the phone is malfunction.
a. the screen is shatter and touch isn't work.
b. usb port doesn't seem to work either.
Main problem now is that I have lockscreen with PIN on, since touchscreen isn't working I can't access it to turn on On-Screen feature.
USB port doesn't work, I think I can use wireless but again, can't get pass the lockscreen.
I have tried remote Unlock from AVG app which I currently has it running on the phone but still cannot get pass the screen.
I want to copy a few important files over first then perform Factory Reset via Recovery.
Does anyway I can do that?
All feedback and thought welcomed.
Also, since I got this phone for 4 months, i believe warranty is over. Anyone know which reliable, good service that I can send my phone for the screen fix?
Thanks all
Since the usb doesn't work so I don't think ADB pull will help, plus I have to turn on the USB Debugging anyway, which I can't now.
Got it.
Case closed.
Hi,
My phone fell down from hand and display is gone. I checked with motorola service center, they have told that display IC is gone.
My phone is working fine without display, If I call then I am able to hear the ringtone and finger print scanner also working fine. my phone USB debugging is turned off.
I have very important information in the mobile. I need that data.
Kindly let me know to get the data from mobile.
Gemz842 said:
Hi,
My phone fell down from hand and display is gone. I checked with motorola service center, they have told that display IC is gone.
My phone is working fine without display, If I call then I am able to hear the ringtone and finger print scanner also working fine. my phone USB debugging is turned off.
I have very important information in the mobile. I need that data.
Kindly let me know to get the data from mobile.
Click to expand...
Click to collapse
Is bootloader unlocked or locked and TWRP installed ?
The only way i know is somehove turn USB mode from 'Charge only' to 'file transfer'
I don't know if Google app / assistant / "ok google" can change it ?
Other way is your luck, if Touch is working, you can ask someone with same device to see where notification and other menu appeare, and go tap and see your luck.. (or ask someone here on xda to provide usefull screenshots of menu.)
____Mdd said:
Is bootloader unlocked or locked and TWRP installed ?
The only way i know is somehove turn USB mode from 'Charge only' to 'file transfer'
I don't know if Google app / assistant / "ok google" can change it ?
Other way is your luck, if Touch is working, you can ask someone with same device to see where notification and other menu appeare, and go tap and see your luck.. (or ask someone here on xda to provide usefull screenshots of menu.)
Click to expand...
Click to collapse
I did not change any settings in mobile, so bootloader is locked.. and TWRP is not installed..
I have disabled the USB debugging few days before my phone got broken (Unfortunate).
Touch is not working because of Display IC short.
Is there a way to enable USB debugging using Clockworkmod recovery or some other procedure to enable MTP file transfer.
Any suggestion to do it using OTG Mouse/Keyboard?
Gemz842 said:
I did not change any settings in mobile, so bootloader is locked.. and TWRP is not installed..
I have disabled the USB debugging few days before my phone got broken (Unfortunate).
Touch is not working because of Display IC short.
Is there a way to enable USB debugging using Clockworkmod recovery or some other procedure to enable MTP file transfer.
Any suggestion to do it using OTG Mouse/Keyboard?
Click to expand...
Click to collapse
Then there's no way, sadly, but without touch you can't navigate to mtp as mentioned before and you also can't turn on own debugging. But unlocking bootloader wipes your phone, so this isn't a good idea
Gemz842 said:
I did not change any settings in mobile, so bootloader is locked.. and TWRP is not installed..
I have disabled the USB debugging few days before my phone got broken (Unfortunate).
Touch is not working because of Display IC short.
Is there a way to enable USB debugging using Clockworkmod recovery or some other procedure to enable MTP file transfer.
Any suggestion to do it using OTG Mouse/Keyboard?
Click to expand...
Click to collapse
As strongst said there is no safe way..
You can ask service center guys if they can change particular circuit/ic and make it work or not... If they say to change motherboard, then refuse to change, otherwise you will lost everything..
As you said to do with mouse/keyboard,
You need same device with same configuration, so you can measure exact distance of mouse to do necessary settings, but it will be completely blind, you will be not sure what you are clicking at.. same with keyboard...
(Also thing to note, if you have screen lock, first difficulty is to unlock it.)
TEST YOUR LUCK...
After it, there is no other way..
____Mdd said:
As strongst said there is no safe way..
You can ask service center guys if they can change particular circuit/ic and make it work or not... If they say to change motherboard, then refuse to change, otherwise you will lost everything..
As you said to do with mouse/keyboard,
You need same device with same configuration, so you can measure exact distance of mouse to do necessary settings, but it will be completely blind, you will be not sure what you are clicking at.. same with keyboard...
(Also thing to note, if you have screen lock, first difficulty is to unlock it.)
TEST YOUR LUCK...
After it, there is no other way..
Click to expand...
Click to collapse
I tried replacing IC and display but that does not work. OTG mouse is very difficult, can any one provide the key combinations to enable USB Debugging or switch on WIFI?
Hello,
my OP5 fell down a while ago and the screen turned black after a day or so. As far as I know repair service from One Plus kills the data, which would be unfortunately.
I believe USB debugging is enabled. If I connect it with my PC it doesn't show the device only the default setup.exe for the device. Usually I needed to unlock it in order to have access to the files.
I can not tell if the touchscreen is still working, since I can't turn of the alarm (at 5am...) with a swipe.
I forgot which OS. Probably cheeseburger.
Does anyone have a suggestion how to proceed?
Hehy there,
unfortunately the screen on my mi9t stopped displaying. Really weird. While I was using it, the screen started flashing, just to turn black and never wake up again. No fall or water involved. The phone still seems to work fine, and even touch seems to work, but no display.
I opened up the phone to see if the connector got loose, but everything is well in place.
Now my problem ist, that I can not access the phone anymore. All my files and things are still on there but unreachable.
Here are the facts:
- no display
- bootloader is locked
- usb debugging is enabled, but my pc is not authorized
- I can blindly get into fastboot and to the lockscreen
- I am not able to blindly unlock the device
Easiest option would obvoulsy be to exchange the display, but unfortunately I can not get on here (South Africa) and shipping would take a month.
My favourite aproach so far was to mirror the screen via Vizor, but unfortunately it needs to install the according app on the device, which it can not while the device is locked.
Does someone here know how to recover the data?
Thanks
and a happy new year to everyone!
cartonneexpress said:
Hehy there,
unfortunately the screen on my mi9t stopped displaying. Really weird. While I was using it, the screen started flashing, just to turn black and never wake up again. No fall or water involved. The phone still seems to work fine, and even touch seems to work, but no display.
I opened up the phone to see if the connector got loose, but everything is well in place.
Now my problem ist, that I can not access the phone anymore. All my files and things are still on there but unreachable.
Here are the facts:
- no display
- bootloader is locked
- usb debugging is enabled, but my pc is not authorized
- I can blindly get into fastboot and to the lockscreen
- I am not able to blindly unlock the device
Easiest option would obvoulsy be to exchange the display, but unfortunately I can not get on here (South Africa) and shipping would take a month.
My favourite aproach so far was to mirror the screen via Vizor, but unfortunately it needs to install the according app on the device, which it can not while the device is locked.
Does someone here know how to recover the data?
Thanks
and a happy new year to everyone!
Click to expand...
Click to collapse
When I experimented, I was able to unlock my two SIM cards and Android by adb (replace xxxx by your PINs)
However, phone was rooted and shell was given the root grant:
adb wait-for-device devices
adb shell
su
input text xxxx
input keyevent 66
input text xxxx
input keyevent 66
input touchscreen swipe 930 880 930 380
input text xxxx
exit
exit
try fastboot apk
Mirror screen to pc with vyzor. You have usb debugging turned on, so it's worth a try.
If touch doesn't work, use usb otg adapter to plug keyboard or mouse
There's no other option.
zgfg said:
...
Click to expand...
Click to collapse
Thank your for the idea! Unfortunately it does not work in the unrooted phone. I suspect that's only because I can't the adb connection to my pv authorized.
I tried this on an unrooted lineage os 17, which I have on my old Mix2, and there it works like a charm.
yaro666 said:
try fastboot apk
Mirror screen to pc with vyzor. You have usb debugging turned on, so it's worth a try.
If touch doesn't work, use usb otg adapter to plug keyboard or mouse
There's no other option.
Click to expand...
Click to collapse
Thanks for the advice. I think i tried everything to get the apk installed, but I can not do anything through adb since even though debugging is activated, the connection to my pc is not authorized.
I guess I have to wait for the replacement screen.
cartonneexpress said:
I guess I have to wait for the replacement screen.
Click to expand...
Click to collapse
Any water exposure? Ever?
May not be the screen; a mobo failure is just as likely even more so especially if they use no lead solder paste.
Maybe a loose or bad connector/cable if you get real lucky... and find it.