Related
As some members are not able to post into Dev forum I am opening this thread in order of getting feedback from you. Please note that the original post are on Dev forum because the ROM is not yet fully ported. Consider yourselves as beta testers
Original thread:
http://forum.xda-developers.com/showthread.php?p=16749947#post16749947
As usual I won't hold any responsibility to any damages it may cause to your phone.
Thanks to Endless7 for research on this subject. Great work!
Thanks to dangpzanco and walter79 for support and ideas.
This is a simplified method of installing MIUI into Milestone2 devices. This ROM is based on Defy's WajkIUI 1.8.12 - MULTiLanguage. It's still a experimental port so not everything is working fine. With this package you DON'T need to flash any SBF into your phone.
Requirements:
- Froyo or GB rooted phone.
- CWM Recovery 3.0+. You can get it here.
Installation:
- Download update.zip to your sdcard.
- Boot into CWM Recovery
- Apply update.zip
- Wipe data/cache/dalvik cache/battery stats
- Reboot.
Working:
1. Compass.
2. Sensors.
3. LED.
4. CWM Recovery
5. Device Keyboard
Not working:
1. Virtual keyboard half size.
2. ALT LOCK key from keyboard ( you can double press ALT instead of ALT LOCK )
3. Media HW play, only support .MP4 hardware decoding
4. keyboard backlight is not working
Please, report any problems you found so I and the other may try to fix it.
Click to expand...
Click to collapse
headset button are fixed ??
xXLuHXx said:
headset button are fixed ??
Click to expand...
Click to collapse
Can you describe the headset problem with more details?
Sent from my MB525 using XDA App
normal headset no bluetooth
the button don't aswer and pause
the button don't work
but the headset yes and mic too
miui
MIUI already walking well
xXLuHXx said:
normal headset no bluetooth
the button don't aswer and pause
the button don't work
but the headset yes and mic too
Click to expand...
Click to collapse
Headset button works for answering calls and miui music (long press for next song).
Sent from my MB525 using XDA App
sory im not updated
thanks for your work =]]
I'm currently using GigerBeta5 and the overall felling is great so far. I'm really glad we have a few options now.
I'm deciding if I will give MIUI a try or wait for a gingerbread kernell version.
Does this ROM still have MotoBlur?
Sent from Motorola Milestone 2
terayder said:
Does this ROM still have MotoBlur?
Sent from Motorola Milestone 2
Click to expand...
Click to collapse
Blur is only on Moto official ROM. CM7 and MIUI are 3rd-party ROM, you will never see blur on them.
Any progress for backlight fix without kill him?
Enviado desde mi MotoA953 usando Tapatalk
Emacore said:
Any progress for backlight fix without kill him?
Enviado desde mi MotoA953 usando Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1217874
I had an issue pairing my phone with my car's bluetooth, would that be a problem with the rom or what?
Sent from my A953 using XDA App
hello!
running GB rooted (Blurless ROM), i've booted into recovery, applied, the update, wiped data/cache/dalvik cache/battery stats and now, when I reboot, i get stuck in red M (Motorola logo).
have I done anything wrong?
thanks in advance =]
How do I fix the bug of the camera? she is the image upside down.
1. camera upside down ( Thanks to walter79 )
comment the line:
ro.media.capture.flip=horizontalandvertical
in /system/build.prop, make sure it is
#ro.media.capture.flip=horizontalandvertical
3dgard said:
How do I fix the bug of the camera? she is the image upside down.
Click to expand...
Click to collapse
Edit /system/build.prop and delete this line:
ro.media.capture.flip=horizontalandvertical
Thanks for pointing that, I forgot to fix this.
Help! I can`t mount sd card in recovery after flash MIUI but when i go into system, my sd card works fine. Anyone know why?
Lutis said:
Help! I can`t mount sd card in recovery after flash MIUI but when i go into system, my sd card works fine. Anyone know why?
Click to expand...
Click to collapse
We have 2 versions of recovery into bootmenu: latest and stable. Have you tried both?
Yap, i reboot for many times and tried both, till now it still cant mount sd card.
Lutis said:
Yap, i reboot for many times and tried both, till now it still cant mount sd card.
Click to expand...
Click to collapse
Are you using Milestone2 A953 or ME722 (china)?
Hi , I cleaned my Windows 7 and installed Win 8 on my C drive for metro apps to work properly . But all I can manage is to get the IE app and the control panel to app . Any advice how can I fix , and I am using the 32 bit version .
motiur said:
Hi , I cleaned my Windows 7 and installed Win 8 on my C drive for metro apps to work properly . But all I can manage is to get the IE app and the control panel to app . Any advice how can I fix , and I am using the 32 bit version .
Click to expand...
Click to collapse
Have u tried installing graphics driver... (It works for me)
Sent from my LG-P500 using Tapatalk
They will only work in certain resolutions.... There is a thread in this forum that has instructions on how to change the reg keys to enable more resolutions.... Worked perfect on my aspire one.
Here's the link
http://forum.xda-developers.com/showthread.php?t=1265544
Sent from my HD7 using XDA Windows Phone 7 App
I tried to upgrade my dell xcd35 (ZTE blade, Gen 2, froyo 2.2) to
jj_95nano's custom ROM. Now it does not go beyond the galaxy SII animation which suppose to be the custom ROM's starting animation. Neither i'm able to reset it to its original ROM which i backed up with CWM/ROM manager as no recovery screen appears.
What I did is,
1. Root it with z4root.
2. Took backup of current (original ROM) on SDcard
3. Download the custom ROM from http://db.tt/ZBUxXAmi as suggested by weeo on thread http://forum.xda-developers.com/showthread.php?t=1602335
4. copied it to root of my SDcard
5. using ROM manager flashed it (after reboot).
6. Then original Dell animation followed by repeated Galaxy SII animation is displaying but not proceeding further.
7. Now I Can't even switch it off using power button.
8. I tried power+home, power+menu , power+home+vol+ , then vol- instead. almost all combinations to reboot in recovery mode. but it doesn't.
9. I can put it off by replacing battery only, however, I can put ON using power button.
Can anybody help me? This is my first experience of rooting any android (I'm afraid, at the cost of my new phone? ). plz help me.
MDPATIL said:
I tried to upgrade my dell xcd35 (ZTE blade, Gen 2, froyo 2.2) to
jj_95nano's custom ROM. Now it does not go beyond the galaxy SII animation which suppose to be the custom ROM's starting animation. Neither i'm able to reset it to its original ROM which i backed up with CWM/ROM manager as no recovery screen appears.
What I did is,
1. Root it with z4root.
2. Took backup of current (original ROM) on SDcard
3. Download the custom ROM from http://db.tt/ZBUxXAmi as suggested by weeo on thread http://forum.xda-developers.com/showthread.php?t=1602335
4. copied it to root of my SDcard
5. using ROM manager flashed it (after reboot).
6. Then original Dell animation followed by repeated Galaxy SII animation is displaying but not proceeding further.
7. Now I Can't even switch it off using power button.
8. I tried power+home, power+menu , power+home+vol+ , then vol- instead. almost all combinations to reboot in recovery mode. but it doesn't.
9. I can put it off by replacing battery only, however, I can put ON using power button.
Can anybody help me? This is my first experience of rooting any android (I'm afraid, at the cost of my new phone? ). plz help me.
Click to expand...
Click to collapse
Have u tried waiting? First boot can take up to 10 minutes. It could also be because u didn't wipe data and cache partitions
Alternatively u will have to install cwm via adb.
Yeah 2 ways to get out of this if it refuses to boot into the rom or recovery mode. Flash adb via recovery ( I wrote some instructions here: http://forum.xda-developers.com/showthread.php?p=24932544 ) or if adb can't be recognised since you cannot boot, use a tpt.
Sent from my Xoom using Tapatalk 2
Did your blade meet the minimum partition specs? It should work anyway though as its GEN2. Use adb.
Sent from my ZTE Blade using XDA app
Thankx QuantumFoam, you were right!
I didn't wait for enough time after boot.
Thanks matt4321 and karthiknr for your valuable comments which helped me deduce to the exact problem.
The problem was solved after reading 'debricking' in ModaCo forum.
I said i tried all the combination for fastboot, but power + volume down, and that was actually worked for cwm recovery. I've restored the original one.
I request, if possible, plz suggest me a good 2.3.x ROM for my dell xcd35(ZTE blade,Gen2).
hurray..i've made it (though restoring) with ur help !
If you want customization go for CyanogenMod 7.1 or a KANG of some sort. For pure stability and decent battery life (with some tweaks) go for Swedish Snow RLS7 which is what I'm running, I love it. CM7 is 2.3.7 and Swedish Snow is 2.3.5
Sent from my ZTE-BLADE using Tapatalk 2
The best is definitely cyanogenmod. Lots of customization ,Theme support, inbuilt equalizer etc.
However if u want an ICS look there's an IceCreamBread rom that combines gingerbread stability with ICS framework
Which one is better....... Cm 7. 2.3.7 or swedish snow rls7 2.3.5 for dell xcd35
matt4321 said:
if you want customization go for cyanogenmod 7.1 or a kang of some sort. For pure stability and decent battery life (with some tweaks) go for swedish snow rls7 which is what i'm running, i love it. Cm7 is 2.3.7 and swedish snow is 2.3.5
sent from my zte-blade using tapatalk 2
Click to expand...
Click to collapse
hey bro i also had dell xcd35 gen2 with stock rom........i want to flash custom rom please suggest me which one is better....... Cm 7. 2.3.7 or swedish snow rls7 2.3.5 ....i am doing it first time please tell me the important things which to use while rooting.....i am new to all this...
unmesh.ghodke said:
hey bro i also had dell xcd35 gen2 with stock rom........i want to flash custom rom please suggest me which one is better....... Cm 7. 2.3.7 or swedish snow rls7 2.3.5 ....i am doing it first time please tell me the important things which to use while rooting.....i am new to all this...
Click to expand...
Click to collapse
I replied to your thread. Please don't spam.
Thanks
QuantumFoam
Sent from my Asus Transformer TF300T using XDA Premium HD app
help
I tried to install android 2.3 from developers but i failed to install.
Now the phone is not starting when i press on and just writing ZTE
then it restarts, over and over not until i remove the battery.
What can i do to fix this problem?
I really miss my Phone!
Please help
arthur0301 said:
I tried to install android 2.3 from developers but i failed to install.
Now the phone is not starting when i press on and just writing ZTE
then it restarts, over and over not until i remove the battery.
What can i do to fix this problem?
I really miss my Phone!
Please help
Click to expand...
Click to collapse
How u tried to install..provide more details
Sent from my Blade using xda app-developers app
My U8800pro's soft keys don't work at all!
I had flash B521 and back to stock rom then my X5's soft key is dead
I re flash many rom but it still don't work
please help me...
soft key work in CWM but don't work in GB B521 and ICS
Download "RootDim" from the market and enable keyboard_ffa_backlight to the on position.
You must be rooted tho.
Somcom3X said:
Download "RootDim" from the market and enable keyboard_ffa_backlight to the on position.
You must be rooted tho.
Click to expand...
Click to collapse
Thank for help but I don't mean backlight. I mean TOUCH DON'T WORK .
hi
i have some problems with this app
win 8 pro x64 optimus l3 e400
it says "phone was not found"
is there any other way to unbrand this phone?
i flashed a cm9 but there are a lot of glitches and my sim is not working
the dev section is quite confusing and there is no tuto for this phone
thanks
Do you have a nandroid backup if so restore it to get back to stock /try kdz on another pc / install win xp and try kdz / tell us glitches you are facing in cm9 so that we may try to give you solutions
Nikufellow
I thought u hasz symbianz¿
JasonxD btw sgy user remember¿
Hmmm
R: kdz_fw_upd and optimus l3
nikufellow said:
Do you have a nandroid backup if so restore it to get back to stock /try kdz on another pc / install win xp and try kdz / tell us glitches you are facing in cm9 so that we may try to give you solutions
Click to expand...
Click to collapse
No backup because noone wrote about the unbrand(this is not my phone) and there is no brand the box but the official rom was branded vodafone
I only have win 8 ubuntu and mac os
I don t have a pc or an hdd to install win xp
The cm9 cannot use the sim, no mobile data, no calls or sms etc..
The words are not readable, the colors are wrong and dark
Do you think that lg can do the unbrand for me? Lol (the lg support)
try rebooting your phone in emergency mode - hold both volume buttons and the power button. A yellow screen will poup up
Sent from my ST21i using Tapatalk 2
R: kdz_fw_upd and optimus l3
Ok and then?
It says port -2, no phone connected
Try unplugging all other usb devices and then start the flash
Sent from my ST21i using Tapatalk 2
74M3NUMB3RS said:
Nikufellow
I thought u hasz symbianz¿
JasonxD btw sgy user remember¿
Hmmm
Click to expand...
Click to collapse
Yup Jason I have symbian only - nokia c5 03 - was just trying to offer my 2 cents here as i got hold of an l3 temporarily from my friend am looking forward to buying one of xperias soon
Anyway good to see you brotha - nice sig too
@op am out of solutions try getting into emergency mode and see
Edit : So you've already got into emergency mode eh? If nothing else works do try with different ports /connectors!