Related
Hi,
Firstly I'll explain my problem. I use bluetooth to connect to my car's audio system. However, I find that once the device goes in to its "powersaving mode" the device looses its bluetooth connection every minute or so and then immediately reconnects. I have found that if I ensure that it doesnt enter powersaving mode eg. by disabling it in the power settings then it doesnt loose its connection. On older ROMs I never had this problem and the device remained connected to the car stereo all the time. I have read that other people have had this problem with various ROMs too. By a process of elimination i think it has something to do with ausdim's XIP. As the ROMs ive used without this mod have worked flawlessly. Does anyone have a solution for this, or know of any modern ROMs that dont have this issue?
Many thanks,
densil
I was wondering if anyone else is having issues with bluetooth on their Archos 101. I can't tell if perhaps my hardware is flaky, or if its a software issue.
Basically, bluetooth seems to work sporadically. Sometimes it pairs like it should, other times it is a fight just to get it to pair with my phone, laptop or bluetooth keyboard. Often times I have to reboot just to get it to pair and it seems to really struggle if both bluetooth AND wifi are enabled.
I'm running the stock current ROM and outside of the android market APK and some basic apps, I haven't done anything wacky or weird to it.
I guess I'm just looking for some validation and/or confirmation and/or possible fixes if any.
Sorry, i have experienced no issues with bluetooth apart from forgetting to switch it on
I have had some issues as well. Paired a set of Motorola S9 bluetooth stereo headphones. They pair and connect fine, but the audio is choppy. It will sound fine for 15-20 seconds and then it will skip, go silent, bring back audio, etc. Tried playing same audio through unit speakers and no problems. I also have an Archos 70 tablet and have no problems with the same headset. Both have been updated with the Froy 2.2. Starting to think it might be a hardware issue with the 101. Anyone have any other thoughts?
Never had it working
I always get paired but not connected. Never have been able to get it to work.
The same problem. Pair, but not connect!
I've never found problem about bluetooth (Archos 101 - firmware version 2.1.08)
Pair & connect with DELL BH200 (Bluetooth Headset) - work fine.
Pair & connect with DELL BT Travel Mouse - work fine.
i'm getting major issues on my new replacement 101. did you ever sort your issues? i'm using latest fw.
its really hit or miss (mostly miss) whether it actually see's any BT devices when it scans. yet wifi works fine 100%
I experiment something very similar with my 101, this both on standard Android and Urukdroid 0.7 or 1.0 :
- very difficult (multiple tries have to be done) to get successfull peering.
- with BT enabled phones
- with BT GPS (G-Sat BT-368i, wich is given in forums to work well on our gen8 devices)
- for the GPS (which is the BT device that interest me) : impossible to have it working directly from GoogleMap, I got some success with "Bluetooth Gps Provider" appli from Market). This device is never shown as connected from the BT Parameters.
Could it be a hardware problem, that is do I have to return the tablet to archos ?
Thanks for your experience feeling about the fiability of the BT on 101 tablet.
It generally works fine for me, but a couple days ago it got stuck, and it would not allow to send me files to other devices until I rebooted the Archos. The same day I was also using bluetooth headphones and the wifi network together, and I had audio stutter problems. It seems that wifi has a negative effect over bluetooth stability.
It works for me... though
Bluetooth is not working on my Archos 101.
When I try "scan for devices" it shows 1 or 2 devices, while my HTC HD2 shows about 5. When I click again on "scan for devices" - sometimes it is howing different device, sometime shows bloothooth adress only.
Evan my HTC can see Archos, it cannot pair with it. Archos never see my HTC.
Zalek
Same here
I can pair with my phone (htc desire hd) but cant connect.
I need my phone connected for gps.
Nobody has a solution ?
No solution ?
Thanks
BT has some issues for me too with an A43.
BT+wifi means i either can't get a proper internet connection, or BT devices disconnect.
quite annoying, because i want to be able to use my BT mouse with the internet browser.
and my jabra halo headset connects in dumb mode (no media/volume controls) most of the time.
which is annoying, because it means my headset is stuck on the volume i last used.
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Think I've sorted out bluetooth problems
I also have had real problems with the bluetooth on Archos 101 - pairing but not connecting, causing "Location & Security" to crash when I attempted to open it (in settings). I updated the firmware to 2.4.19 and then rebooted - still the same problems, so I did a full initialization and hey presto all problems seem to have vanished ! A pain because I've now got to re-download all the apps I had before but at least the tablet is working as it is supposed to.
Hope this helps others.
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
Hello
How can I backup all my data?
Thks
Followed your instruction however it is not work for me. I am running the last patch (2.4.19)
Thanks
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
It is not working for me.....
Archos 101 Bluetooth Problem - Known issue?
I'm having the same problems. I contacted Archos support and they told me to do a full reinitialization. This did not resolve the issue.
When scanning for bluetooth devices, nothing shows up until the 5th or so attempt.
The mac address of the discovered device is shown instead of the device name.
When attempting to connect it fails several times, then it pairs but says "paired but not connected."
When I finally connect the audio stutters. It's extremely choppy... useless.
If the bluetooth is left on, the 101 will eventually freeze when the screen sleeps and cannot be woken up by pressing the power button. The green light stays on when this happens. Pressing the button a few times or holding it in reboots the 101.
After reading all the posts I've come to the conclusion that Archos likely knows about this issue.
Archos, if you're reading this, for the sake of your customers, please admit this is a known issue and let us know if it's fixable and when a possible fix may be available.
I encourage everyone to open a ticket with Archos support.
If you purchased your 101 used and it's been registered by the previous owner, you can register it and the registration will be instantly transferred to you.
Create a support account at archos.com
After you create an account you can add products to your account and submit tickets for them.
Firmware: 2.4.81
Board ver: A101IT-V5
OMAP ver: ES1.2
Boot ver: Unknown / 4.04.000000
My bluetooth device: Jensen WTB210. Works fine with several other android devices.
Running my Mi A1 with stock ROM but having numerous bluetooth issues.
It will connect to my earphones without issue, and to my keyboard. However it will not connect to my Ford Fiesta, or to my Amazon Echo. Tested my oneplus 3 with these to confirm and they work fine, so its purely the Mi A1.
I have tried clearing bluetooth cache and forgetting the link.
Any other steps to resolve this?
Generally the devices never even connect at all, says connecting then gives up.
Update: ran the latest software update so I am now running 8.1, still not able to connect to 99% of the devices I try, says pairing then gives up. Any ideas?
I have some BT issues as well, this is my experience.
With Oreo 8.1 stable (updated OTA from 8.0) I was unable to pair further BT devices ("wrong PIN or passkey"),
although those paired previously (some from Nougat) still worked. Neither clearing BT cache and data or resetting
the network settings helped. I saved a couple of logcat logs during the unsuccessful attempts to pair a BT headphone and a BT speaker that worked earlier.
After a full factory reset BT pairing starts working again, although it seems that this happens only for a while,
then it may stop again, maybe I have some interfering app or whatever. I am not trying to delete some paired device
to check again.
This issue is still ongoing, tried more devices and same issues.
Another one I tried is connecting my phone to a bluetooth keyboard (Anne Pro). This works fine, however now the phone keeps popping up with "Please connect a keyboard".
azboxgo said:
I have some BT issues as well, this is my experience.
With Oreo 8.1 stable (updated OTA from 8.0) I was unable to pair further BT devices ("wrong PIN or passkey"),
although those paired previously (some from Nougat) still worked. Neither clearing BT cache and data or resetting
the network settings helped. I saved a couple of logcat logs during the unsuccessful attempts to pair a BT headphone and a BT speaker that worked earlier.
After a full factory reset BT pairing starts working again, although it seems that this happens only for a while,
then it may stop again, maybe I have some interfering app or whatever. I am not trying to delete some paired device
to check again.
Click to expand...
Click to collapse
Did you ever manage to isolate the cause of this? I still can't connect to devices
Fenwick17 said:
This issue is still ongoing, tried more devices and same issues.
Another one I tried is connecting my phone to a bluetooth keyboard (Anne Pro). This works fine, however now the phone keeps popping up with "Please connect a keyboard".
Click to expand...
Click to collapse
I have never had a problem but have read in several threads people say they have trouble pairing with Bluetooth while Wifi is turned on, not saying it will work but try turning off the Wifi and maybe data too and see if it helps, other have reported it does.
Done another factory reset, issue still persists. Have tried removing all Bluetooth devices, wifi, and mobile network off. Still unable to connect to a bunch of devices.
Tried a bunch of different things, but still can only connect bluetooth to my earphones, and sometimes Amazon Echo. Everything else will just say connecting and then stop.
Problem: Intermittent Bluetooth connection with my Prius C. Found two Bluetooth apps in system apps.
When I go into the bluetooth app to clear cache and data, I noticed TWO Bluetooth apps! One is version 8.0 which is appropriate since I've upgraded to Oreo. And, the second Bluetooth app is version 6.20.18. After trying everything I could think of to fix my connectivity issue, I'm at the point of a factory reset and rebuilding my device with hopes of resolution. But first, I wanted to ask if anyone else is seeing TWO bluetooth apps on their phones? Settings/Apps & Notifications/ Apps, then expand menu to show system apps.
Again, is anybody else seeing two bluetooth apps? Wouldn't this create a conflict with anything trying to connect? How can I delete the old app since they are both system apps? TIA
I've also got two apps. Enable Developer options and try to change Bluetooth - AVRCP version to AVRCP 1.4 (Default). After that my TomTom watch could connect to G6 without problems. Maybe it will be also a solution for your problem.
adamz667 said:
I've also got two apps. Enable Developer options and try to change Bluetooth - AVRCP version to AVRCP 1.4 (Default). After that my TomTom watch could connect to G6 without problems. Maybe it will be also a solution for your problem.
Click to expand...
Click to collapse
Thanks for the suggestion. I've done as suggested with mixed results. I unpaired my G6 from my Prius, deleted the G6 profile from the Prius and still got the BT connecting and then disconnecting. I didn't have time to reboot so I wonder if that may be my issue (cache memory?). I'll try that at lunch. However, after a minute or so, I was able to stream uninterrupted. Thanks for the suggestion and solution, hopefully
I'm having a similar issue with my G6 and a 2016 Subaru Outback. Keeps dropping the connection and connecting. Sometimes it is ok for a while. Sometimes it keeps doing it from the time I start the car. Worked great until 8.0 update. See thread here: https://www.subaruoutback.org/forums/138-gen-5-2015-2019/501767-bluetooth-connection-issues-lg-g6.html#post5728313
Update: Still having mixed results (when connecting to my Prius). so, after some connection back and forth, I have been successful with streaming Pandora and Amazon Prime for more than 20 minutes w/o interruption.
I've tried Google Play in the car and it's as if the connection is possessed. It's so unstable that it makes me believe Google Play is somehow responsible. Yet, my BT headphones connect and play without issue for over 1hr while mulching leaves.
I still don't fully understand how their can be 2 Bluetooth apps on my phone without any type of conflict, especially since they are different versions. I'm thinking that when my phone updated to Oreo, the old Bluetooth app/file didn't get removed.
@TheGs - Have you done a factory reset? If so, how many bluethooth files/versions on phone after reset? I was hoping a reset would fix this puppy. I too am on TMo/H872.
I still have two apps after a factory reset. (I'm just here because I've had bluetooth crashing after the latest OTA from T-mobile.)
UPDATE: having followed the suggestion from @adamz667 above, I changed the AVRCP to 1.3 and so far so good. Bluetooth just connects with no interruptions what so ever. Maybe this will help if you are having simiilar issue.
@lovecomplex - thanks for replying on the number of bluetooth apps you have after reset. Now that I seemingly have resolved my issue I see no need to reset at this point, Good Luck!
got a brand new G6. Bluetooth is broken out of the box. I can't stream anything to any bluetooth devices. Changing it to AVRCP 1.3 under Developer Options made streaming possible but it is choppy. I am on Nov 1 android security patch.
WTF LG? It is brand new, brand new!
Hi all,
A couple months ago I treated myself with a pony car from Ford, that runs a Ford Sync 3 multimedia system. It supports Android Auto as well as Carplay, by cable only.
When I brought the car from Germany (2nd found there) I was still running my old 5T as a temporary phone because my 8 Pro was being serviced (long story, useless here). AA worked flawlessly with it.
Since I got my 8 Pro back (initially running OOS11), it has NEVER worked correctly with Android Auto: whatever the cable, whatever the OS, AA will eventually disconnect. The phone keeps showing a "android auto is enabled" notification, but the media system does not see it anymore. Basically, all ongoing app stop working on the screen, the media system reverts to a non-AA state.
I have tried with the OEM cable and third-party ones. On the front USB plug of the one in the armrest. Resetting the phone, resetting the car. Eventually, it fails again. All Pointe towards some stability of the USB connection: it works for longer with the OEM cable. As read in other threads and googling, I've tried by setting the default USB mode to various things (in dev options), enabling/disabling OTG... To no avail.
This is very frustrating because although I could buy a wireless AA dongle, I like things to "work as intended". Android Auto seems to be a very painful experience, overall (that's what a quick Google search tends to say). Is there any way to actually troubleshoot things? AA has a developer mode, is there any chance to grab a proper debug log for when it crashes? Sadly enough, Carplay works fine. I'm stuck with my wife's Spotify Playlist...!
Same happened with OOS11, OOS12 (C.20 atm but also occurred with the one just below). Oh yeah, I'm magisk rooted, just FYI.
Thanks and cheers!
/e : apologies for posting to the the wrong section and thanks to the mod who moved the thread
Little bump. Has anyone faced issues with Android Auto, and found a way to at least troubleshoot it?
Problems with android auto afaik are mostly car related. Using it for a long time with less problems, oos 11 and 12, hyundai i20 (wireless android auto). Maybe you should ask Ford for that, maybe they have updates for car audio firmware. Seems some car audio system didnt have a proper integration of android auto...
Bump here.
I have digged the question of firmware updates for the APIM. Turns out there are none (even checked myself with FORScan). Got the opportunity to try with another OP8 (not a Pro). Exact same behavior. These same two phones (my OP8Pro and the other OP8) do work perfectly fine in another car (Hyundai) though.
Android Auto has always been questionable in terms of reliability but this is completely unusable now. Is there any chance to troubleshoot the connection in developper mode ?