Related
Hi,
hopefully anyone has an answer to the strange bluetooth behaviour of my X1.
The first device is a bluetooth headset from Sony. It works good, if bluetooth is activated. But after some time of not using the headset, the phone just switches off bluetooth. Sometimes after a few minutes, sometimes days after my last use of the headset. I tried all settings of the bluetooth-settings with no change. And it sucks if with the next phone call the headset cannot connect anymore because bluetooth was switched off.
The second device is a GNS TrafficBox Plus FM9BT-Y. Somehow MN7 does not detect the device directly, so I have to use the workaround with the serial port and outgoing connection on COM1.
The initial minutes the connection works fine, but then stops and is not restored.
Here as well trying different settings changed nothing.
How can I find out the address of the bluetooth devices?
Is there a tool to further test bluetooth connections (like what speed can be used, the address of the device, etc)
Regards
pt
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
I have Ra2generic DE with the 1.10 radio ROM on it.
At the beginning it was fantastic not having the bluetooth issue. Everything was working so extremely goood... no switching off, no disconnecting of and from the bt headset,, etc...
After a while the issue was here again...damn! So the bt became not very useful in its functionalities.... then I saw that it was not possible to see through my bt freespeech device in the car the last calls on the phone... hm, ok I said. There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
i have the same problem, the bluetooth disconect without any reason, i have tried more than 10 Roms and i dont have any solution
¿is so dificult for Sony to repare this problem?
zagito said:
There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
Click to expand...
Click to collapse
I hardreseted the device, installed the newest official firmware, deleted the calling list and with great expectations checked bluetooth behaviour.....nothing changed for me
But great it works for you and thanks for the tip
Come on people..... please someone help us with this
Bluetooth with clarion mind
Am having trouble connecting with my new Clarion MIND - is seems the phone does not see the profiles (very similar to the phone adding the older SE Bluetooth Watch, the 100). Has anyone built a .cab to sort this out?
I was wondering if anyone else is having issues with bluetooth on their Archos 101. I can't tell if perhaps my hardware is flaky, or if its a software issue.
Basically, bluetooth seems to work sporadically. Sometimes it pairs like it should, other times it is a fight just to get it to pair with my phone, laptop or bluetooth keyboard. Often times I have to reboot just to get it to pair and it seems to really struggle if both bluetooth AND wifi are enabled.
I'm running the stock current ROM and outside of the android market APK and some basic apps, I haven't done anything wacky or weird to it.
I guess I'm just looking for some validation and/or confirmation and/or possible fixes if any.
Sorry, i have experienced no issues with bluetooth apart from forgetting to switch it on
I have had some issues as well. Paired a set of Motorola S9 bluetooth stereo headphones. They pair and connect fine, but the audio is choppy. It will sound fine for 15-20 seconds and then it will skip, go silent, bring back audio, etc. Tried playing same audio through unit speakers and no problems. I also have an Archos 70 tablet and have no problems with the same headset. Both have been updated with the Froy 2.2. Starting to think it might be a hardware issue with the 101. Anyone have any other thoughts?
Never had it working
I always get paired but not connected. Never have been able to get it to work.
The same problem. Pair, but not connect!
I've never found problem about bluetooth (Archos 101 - firmware version 2.1.08)
Pair & connect with DELL BH200 (Bluetooth Headset) - work fine.
Pair & connect with DELL BT Travel Mouse - work fine.
i'm getting major issues on my new replacement 101. did you ever sort your issues? i'm using latest fw.
its really hit or miss (mostly miss) whether it actually see's any BT devices when it scans. yet wifi works fine 100%
I experiment something very similar with my 101, this both on standard Android and Urukdroid 0.7 or 1.0 :
- very difficult (multiple tries have to be done) to get successfull peering.
- with BT enabled phones
- with BT GPS (G-Sat BT-368i, wich is given in forums to work well on our gen8 devices)
- for the GPS (which is the BT device that interest me) : impossible to have it working directly from GoogleMap, I got some success with "Bluetooth Gps Provider" appli from Market). This device is never shown as connected from the BT Parameters.
Could it be a hardware problem, that is do I have to return the tablet to archos ?
Thanks for your experience feeling about the fiability of the BT on 101 tablet.
It generally works fine for me, but a couple days ago it got stuck, and it would not allow to send me files to other devices until I rebooted the Archos. The same day I was also using bluetooth headphones and the wifi network together, and I had audio stutter problems. It seems that wifi has a negative effect over bluetooth stability.
It works for me... though
Bluetooth is not working on my Archos 101.
When I try "scan for devices" it shows 1 or 2 devices, while my HTC HD2 shows about 5. When I click again on "scan for devices" - sometimes it is howing different device, sometime shows bloothooth adress only.
Evan my HTC can see Archos, it cannot pair with it. Archos never see my HTC.
Zalek
Same here
I can pair with my phone (htc desire hd) but cant connect.
I need my phone connected for gps.
Nobody has a solution ?
No solution ?
Thanks
BT has some issues for me too with an A43.
BT+wifi means i either can't get a proper internet connection, or BT devices disconnect.
quite annoying, because i want to be able to use my BT mouse with the internet browser.
and my jabra halo headset connects in dumb mode (no media/volume controls) most of the time.
which is annoying, because it means my headset is stuck on the volume i last used.
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Think I've sorted out bluetooth problems
I also have had real problems with the bluetooth on Archos 101 - pairing but not connecting, causing "Location & Security" to crash when I attempted to open it (in settings). I updated the firmware to 2.4.19 and then rebooted - still the same problems, so I did a full initialization and hey presto all problems seem to have vanished ! A pain because I've now got to re-download all the apps I had before but at least the tablet is working as it is supposed to.
Hope this helps others.
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
Hello
How can I backup all my data?
Thks
Followed your instruction however it is not work for me. I am running the last patch (2.4.19)
Thanks
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
It is not working for me.....
Archos 101 Bluetooth Problem - Known issue?
I'm having the same problems. I contacted Archos support and they told me to do a full reinitialization. This did not resolve the issue.
When scanning for bluetooth devices, nothing shows up until the 5th or so attempt.
The mac address of the discovered device is shown instead of the device name.
When attempting to connect it fails several times, then it pairs but says "paired but not connected."
When I finally connect the audio stutters. It's extremely choppy... useless.
If the bluetooth is left on, the 101 will eventually freeze when the screen sleeps and cannot be woken up by pressing the power button. The green light stays on when this happens. Pressing the button a few times or holding it in reboots the 101.
After reading all the posts I've come to the conclusion that Archos likely knows about this issue.
Archos, if you're reading this, for the sake of your customers, please admit this is a known issue and let us know if it's fixable and when a possible fix may be available.
I encourage everyone to open a ticket with Archos support.
If you purchased your 101 used and it's been registered by the previous owner, you can register it and the registration will be instantly transferred to you.
Create a support account at archos.com
After you create an account you can add products to your account and submit tickets for them.
Firmware: 2.4.81
Board ver: A101IT-V5
OMAP ver: ES1.2
Boot ver: Unknown / 4.04.000000
My bluetooth device: Jensen WTB210. Works fine with several other android devices.
Anybody experienced the Bluetooth issue w/ Pdaimatejam's ROM? My Bluetooth could be switched on and stable. But it always shows "Searching..." and cannot find any Bluetooth device. I cannot find HD2 from other Bluetooth device either.
Please advise!
mine works sweetly
ermm... a) make sure the other phones bluetooth is set to be Discoverable
and b) so a soft reset )
Emm...
After performing some further testing, I found it can pair with my laptop, but still cannot connect to my car. Seems like the Bluetooth in that ROM is not compatiable with my car.
larryexchange said:
Emm...
After performing some further testing, I found it can pair with my laptop, but still cannot connect to my car. Seems like the Bluetooth in that ROM is not compatiable with my car.
Click to expand...
Click to collapse
Finally I have to roll back to HD2O's 1.22. That ROM's bluetooth module works perfect.
in my case, I only get paired when I also put wifi on after that I cult put it off again
but It can not connect Automaticly you have to put it off wait 30s
put it on and after 30s they a connected and stays stable with out wifi
thats in V2 with original soft radio
Hello!
I have a problem with delayed and cut off notifications over my bluetooth hands free device (Parrot MKi 9200). I can experience it on almost every ROM despite ROMs with Tytung's kernels.
Everytime my copilot live 8 says something like "In 500 meters turn left" it takes a little while (maybe one second) for the phone to establish the bluetooth connection to my handsfree device and all i can hear is "..eters turn left". The only ROMs without this issue are those using Tytyng's kernels. They work just perfect. And yes, I know the workarounds like letting the phone play music all the time, but this doesn't work for me, for i listen a lot to the radio or use the SD Card in my Parrot for playing music - so this is not a solution for me.
I tried to find out more about this issue, but all i could figure out was, that this seems to be an android problem. Due to power saving issues Android would close the A2DP connection and reestablish it, once there is a signal comming up. Please correct me if I am wrong on this one.
However, since Tytung figured out, how to get this thing done right it must be also possible on other kernels and smartphones. Is there a way, maybe to change some settings or a working app or some kind of bluetooth drivers, to solve this issue on other ROMs or even other android phones?
Thank you in advance for your help
Don't know of any app, but just by playing blank.mp3 in music player could help you(it holds bluetooth audio connection-stays on all the time)
your sound cuts are because of low power bluetooth mode, try asking kernel dev to disable it?
I have the same problem and it would be nice to have a buffer application which buffers sounds for Bluetooth for a second and transmit them when the connection is active.
Sure it's an old thread... but has anyone tried this?
https://play.google.com/store/apps/details?id=com.turboled.enhancedtts
Should at least fix the problem for the navigation commands...
Thanks, will try it
I got a new MOTO 4G Play to replace and older Samsung. I like it except for one thing. I have to unpair ("forget") the device and then cycle the radio on and off a couple times and then turn on the adapter and then pair and connect to get it to work. I have to do this each time.
I've contacted that adapter mfg and moto they both point to each other. They even said a new pone won't likely fix the problem. No one is actually interested in solving the problem. I'm sure there are plenty of others in the same situation. The adapter mfg says it is a problem with moto phones.
Are there any bluetooth radio hacks or other versions. I don't know what radio I have or how to find out. I'd rather not go with a complete custom ROM at this time.
Any suggestions on what the problem could be, how to fix, how to address compatibility problems when both mfgs say the other is causing the problem. Is there somewhere to officially complain about BT compatibility issues? Is BT an industry standard or a specific company that licenses it?
It seems like I should have some recourse here, but, so far I've spent a lot of time going in circles dealing with level 1 support people who only fill in forms or read off lists as well as time and money spent on phone calls, being put on hold, etc.
While Bluetooth is an industry standard, there are different versions (3.0, 4.0, 4.1, etc.) which transmit data in different ways. There are other standards as well, such as A2DP. But for all of this to work, both devices need to be able to detect each others' Bluetooth MAC and store it long term. If one device forgets it has that knowledge, then it won't recognize the others' BTMAC at all.
Changing to a ROM isn't going to fix this (Lineage is notorious for killing BT when you change from cellular to WiFi, and to this day it still isn't completely fixed). What I recommend is going into Apps, looking for Bluetooth Share, and clearing its data. Then try re-pairing to the device.
I tried clearing the data as you suggested as well as during a hard reset and that doesn't work.
I do have a sequence of steps that works pretty consistently, but, I have to do it interactively. I'm wondering if I could just write a script to do these steps. Some of them like the pairing and the connection take a little time and may need some timing steps. Ideally it could access a signal when the connection is made or not made etc. I could just set it in motion and go about putting on the seatbelt, starting the car, etc while it is working.
I have no idea what commands the different things I interact with use. It involves forgetting the connection, cycling airplane mode on and off, pairing and then after they are paired connecting. Any ideas?
Some people on the Moto forums suggest disabling Bluetooth Scanning. It seems to work for some people; others report no change in their connection after turning it off.
I'm running LineageOS, and as the previous reply stated, my Bluetooth restarts when changing between WiFi and cell data. I tried Bluetooth scanning on and off, and neither seemed to fix the Bluetooth restarts.