Anybody experienced the Bluetooth issue w/ Pdaimatejam's ROM? My Bluetooth could be switched on and stable. But it always shows "Searching..." and cannot find any Bluetooth device. I cannot find HD2 from other Bluetooth device either.
Please advise!
mine works sweetly
ermm... a) make sure the other phones bluetooth is set to be Discoverable
and b) so a soft reset )
Emm...
After performing some further testing, I found it can pair with my laptop, but still cannot connect to my car. Seems like the Bluetooth in that ROM is not compatiable with my car.
larryexchange said:
Emm...
After performing some further testing, I found it can pair with my laptop, but still cannot connect to my car. Seems like the Bluetooth in that ROM is not compatiable with my car.
Click to expand...
Click to collapse
Finally I have to roll back to HD2O's 1.22. That ROM's bluetooth module works perfect.
in my case, I only get paired when I also put wifi on after that I cult put it off again
but It can not connect Automaticly you have to put it off wait 30s
put it on and after 30s they a connected and stays stable with out wifi
thats in V2 with original soft radio
Related
I bought my qtek last week and trying ever since to get it connected with my carkit..
Sometimes this works and I can hear and talk through my carkit. Other times it only rings through my carkit and when i pick it up it disconnectw with the carkit and goes back to the qtek. Or it doesn't connect at all.
I've tried several things..
-first I wanted to try the new bluetooth patches.. this works a little better for example without switching on the qtek and turning the key, they automatically connect. Not all times but ik works a little better.
-trying to put a new ROM version on my qtek, got a country id error.. Got rid of it using the xda3nfbtool.. then got a radio image file checksum error.. Don't know how to bypass this because it has to do with the passwords in the xda3nfbtool.exe..
So now I'm here, hoping that some wizzkids know how to get a permanently good bt connection...
Who dares??? Or has suggestions??
Thanks in advance,
Sorry my english isn't my main language
BMW BT with Blue Angel
Same problem here. Have tried all available patches. the 3500 BT version works with the least amount of trouble. But even with this one I never know how long it will take to get it working and wether I will hit a tree in the meantime.
A Friend of mine uses the Motorola Carkit with no problem. I think the BMW System is too complicated with i5s address-book synch to work. By the way, how many adresses do you havein your qtek?
Hi,
I do have at least a very similar problerm with my Audi BT. I can connect, it works just fine when I make a call, BUT it looses connection after picking up an incoming call...
I tried all stacks I could get my hands on from 1900 thru 2400 till 3500 and even 6600...
Anyone with an idea!?
TIA
PEACE AND B WILD!
Re: BMW BT with Blue Angel
jofeuerstein said:
Same problem here. Have tried all available patches. the 3500 BT version works with the least amount of trouble. But even with this one I never know how long it will take to get it working and wether I will hit a tree in the meantime.
A Friend of mine uses the Motorola Carkit with no problem. I think the BMW System is too complicated with i5s address-book synch to work. By the way, how many adresses do you havein your qtek?
Click to expand...
Click to collapse
Don't know how many adresses, about 150... But at this time I have none in the PDA, just to test if the BT connection will work... But it has to do with the connection and not the adress book... I just found out that different models of BMW could have different model of BT carkits. And BMW uses a siemens carkit according to a mechanic from BMW.
I hope someone has the brains to pull this of.. Because how is it possible to get a only sometimes connection. This means that it could work, or is that just my postive attitude.
bmw car kits
by wot i understand bmw are about 100000 years behind with there software on the car kits 6600 t610 v600 etc all work but your new one dropn in and out all the time
Blue Angel and BMW Bluetooth Blues
at Denis123: thanks. I have 4000 adresses on the PDA and thought the problems come because the BMW tries to download them ... if you have the same problems with 150 adresses, then the adresses are not the cause. At the moment with the BT 3500 (+ this small fix on the download section) the paring works and connecting the MDA when I get into the car works mostly. What drives me nuts is that it doesn't work ALWAYS. Sometimes i have to tinker for 15 Minutes while driving until it works. But once the connection worked, it functions very reliably ... until the next time I get into the car.
So the best I can recommend: Latest ROM version plus BT 3500 + this funky extra fix which I don't know what it's good for.
Re: Blue Angel and BMW Bluetooth Blues
jofeuerstein said:
at Denis123: thanks. I have 4000 adresses on the PDA and thought the problems come because the BMW tries to download them ... if you have the same problems with 150 adresses, then the adresses are not the cause. At the moment with the BT 3500 (+ this small fix on the download section) the paring works and connecting the MDA when I get into the car works mostly. What drives me nuts is that it doesn't work ALWAYS. Sometimes i have to tinker for 15 Minutes while driving until it works. But once the connection worked, it functions very reliably ... until the next time I get into the car.
So the best I can recommend: Latest ROM version plus BT 3500 + this funky extra fix which I don't know what it's good for.
Click to expand...
Click to collapse
Can you tell which type of BMW you drive?? And if it's not to much trouble then mention the ROM, Radio version etc you have on your PDA... That is what I (and maybe others) would like to know.
Thanks in advance..
You say that sometimes it takes up to 15 min to get a connection! Maybe this could be due to the phonebook.. I don't no for certain, but if you're BMW tries to take over the adress book of your PDA that could take a while with 4000 entries.. What you could try is, if you're synchronising with your computer leave out the adresses in active sync. So that there are no adresses in your PDA. Then try to pair with the BMW and see what it does... Maybe then it works faster... I'm curious if you get a good connection between the PDA and the Beemer.... Please let me know.
Greetz
Have just installed:
ROM version 1.22.00. WWE
Radio version 1.06.02
ExtROM version 1.22.557 WWE
Tried it AGAIN in my BMW...
First time connection --> connection failed, BT BMW says erfolgreich (succeeded)
Switch contact on/off --> everything works I can phone, and incoming calls also work.. That's how it's suppose to be
Switch contact on/off --> There is a pairing, but as soon as I get an incoming call the phone goes off in the car, but when I answer afther a few seconds the connection is gone.
Switch bluetooth on/off on PDA --> It works again??!!?!
So a early conclusion is that the bluetooth has to be totally switched off when the PDA is off.. If phone rings PDA switches on and connects to carkit.. Does anbody know if this is possible, then I will try it out???
Thanks
I think I have found a solution. I'm not sure but so far this works..
Now I need someone to help with the following...
The bluetooth on the PDA must be switched of when you turn the ignition.
Then when you have your car running you switch on the bleutooth on the PDA... They pair and connect... I've tried it several times and it works...
Now when you switch of your car and turn it back on again the pairing will work but there is no connection. So in my case the phone rings in the car but when i pick it up it switches back to the PDA..
Conclusion; Only when the PDA is switched on the Bleutooth is allowed to switch on... So when you're being phoned, first the PDA goes on and a few seconds later the carkit is active and you're able to pick up through the steering wheel..
SO THIS IS IMPORTANT..
Is someone capable to make a prog. or to delete something in the original bluetooth prog. in PDA that the bleutooth function isn't always ON, only when you put on your PDA...
I really hope someone can help??!?!?!?!
Thanks
Re: Blue Angel and BMW Bluetooth Blues
jofeuerstein said:
at Denis123: thanks. I have 4000 adresses on the PDA and thought the problems come because the BMW tries to download them ... if you have the same problems with 150 adresses, then the adresses are not the cause. At the moment with the BT 3500 (+ this small fix on the download section) the paring works and connecting the MDA when I get into the car works mostly. What drives me nuts is that it doesn't work ALWAYS. Sometimes i have to tinker for 15 Minutes while driving until it works. But once the connection worked, it functions very reliably ... until the next time I get into the car.
So the best I can recommend: Latest ROM version plus BT 3500 + this funky extra fix which I don't know what it's good for.
Click to expand...
Click to collapse
What is the "this small fix on the download section)" Can't find what you mean?
@tbd: forget the fix. It was an older version that I mistakenly downloaded ->my mistake
@dennis123
In the meantime I use:
Ext. Rom 1.22.01 GER
ROM-Datum 10/26/04
Radio-Version 1.06.02
Protokoll Version 1337.38
ExtROM 1.22.182
Bluetooth 1.0.0.3500
Yesterday morning I went to my car with BT OFF, turned the car on, turned BT on and it worked flawlessly.
Yesterday evening I went to the car with BT ON, turned the car on, and the BT paired, but during the first call it dropped the connection.
Same today. => I have at least one reproducable way to get the darn thing working. I can't say that satisfies me, but i will stop wasting time with this ;-)
Has anyone tried this with BT 3900 ?
PS: Somebody asked what kind of BMW: The car is an X5 build in 9/04, with the Bluetooth interface and without navigation.
i've a new seat leon with built in bluetooth hands-free phone system and the qtek 9100.
the device pairs without any problem with the car, but automatically disconnect after a minute.
is there any way to stay connected or any patch?
thanks for help,
powerlord
same
i have the same problem.
i used to have dutty v1 rom on my hermes and was working fine
today I installed dutty v2 rom and the problem started.
I dont know if the problem is the rom, I'll check it out with another phone and let you know.
Same problem here.
Just picked up a Seat Altea XL with what I trust to be the same Bluetooth system. My HTC TyTN (the model sometimes called Hermes or Qtek 9600) gladly pairs to the car, I get the phone book etc., but after a while I get a sound and the display goes "Please insert phone". A minutes sounds about right, perhaps even sooner.
It will connect after a few minutes, but then disconnect again.
My wife's Nokia 6021 connects beautifully.
How does one check the HTC's version - and where to get other ROM versions?
hi.. i hve a skoda, octavia 2, it has factory installed bluetooth car kit, i can easily connect my Herms , but it keeps disconnecting and reconnecting every few minutes, I tried to upgared to WM6 and its same, I cange my bluetooth control unit at Skoda , and its same. the car kit works fine on any other phones like Nokia or SE. the problem is only with HTC devices. any idea ?
not a single reply !!!
This is a common problem with the TyTn, there are plenty of other threads here with exactly the same problem. I have a Parrot C3000 Evolution car kit and am using a LVSW WM6 ROM (see sig) which works most of the time (better than other ROMs in my experience) - although I experience the following all the time;
Bluetooth turns itself off (on the TyTn)
Bluetooth is on, but the phone won't connect to the car kit
Connection to the car kit gets lost after making a call
Connection to the car kit gets lost when dialling a number
In most cases going to connection manager and turning bluetooth off then on usually works, sometimes (rarely) I have to soft reset the phone and once in a while I have to soft reset the phone and the car(!). When it does all connect it works very well, I also use MS Voice Command and with the various fixes applied I get announcements, voice dialing etc. all working perfectly.
My problems with bluetooth are limited to the car kit though, I also have a TomTom bluetooth GPS dongle which works perfect all the time.
thanks forza
thanks a lot, at least I don't feel lonley with my problem.
i found this, which works great with my car kit.
www.jetwaremobile.com it costs, but there is a 30 day trial to see if it will work with your car kit.
m15chief said:
i found this, which works great with my car kit.
www.jetwaremobile.com it costs, but there is a 30 day trial to see if it will work with your car kit.
Click to expand...
Click to collapse
can you please advise how to setup the jetware ??
forza said:
This is a common problem with the TyTn, there are plenty of other threads here with exactly the same problem. I have a Parrot C3000 Evolution car kit and am using a LVSW WM6 ROM (see sig) which works most of the time (better than other ROMs in my experience) - although I experience the following all the time;
Bluetooth turns itself off (on the TyTn)
Bluetooth is on, but the phone won't connect to the car kit
Connection to the car kit gets lost after making a call
Connection to the car kit gets lost when dialling a number
In most cases going to connection manager and turning bluetooth off then on usually works, sometimes (rarely) I have to soft reset the phone and once in a while I have to soft reset the phone and the car(!). When it does all connect it works very well, I also use MS Voice Command and with the various fixes applied I get announcements, voice dialing etc. all working perfectly.
My problems with bluetooth are limited to the car kit though, I also have a TomTom bluetooth GPS dongle which works perfect all the time.
Click to expand...
Click to collapse
I have found that my 3200LS Color works great as long as I have unlocked my phone BEFORE turning ignition on. Have you updated your Parot firmware to latest version?
timbouk said:
I have found that my 3200LS Color works great as long as I have unlocked my phone BEFORE turning ignition on. Have you updated your Parot firmware to latest version?
Click to expand...
Click to collapse
Firmware is the latest version for my device, but will try unlocking as you suggest and see how that goes, thanks for the tip.
parrot ck3100 and spv m3100 with wm6 dutty v2... it works perfect... i had black 3.0.1... it all went well untill a call in or out was made... but with dutty v2 it is al perfect... i am amezed myself when i see all the problems others have...
Hi, i recently got a HTC HD Touch on Orange which i bought on ebay. The phone already came loaded with WM 6.5 on and so far i love it except for one problem. I have a Datsun 350z with intergrated bluetooth. When i tried to search on my phone it couldnt see anything, so this morning i upgraded my phones ROM to the latest Dutty's_HD_WM6.5_5.2.23016.5.0.3_Leo_R5. Since then i can search and find the bluetooth device of the car, input the pin code for it and it is added in my devices tab, however nothing appears in the "Select services to use from this device" section.
I am wondering if nyone had any idea if i am doing something wrong or whether its jsut that my car doesnt support the phone? I was also thinking about reverting back to WM6.1, would that work? Also, how do i go about getting a vanilla copy of WM 6.1?
Any help would be much appreciated,
Regards
jc0r
Just a quick update. I can get the phone to connect to the bluetooth module in the car but its not easy. Basically when i put the keys in ignition that bluetooth gets power, i then have to quickly search for bluetooth devices on my phone and then it will connect. Would be nice if the phone just connected everytime to the car like my Blackberry did. Is this hardware or software problem please?
Not that anyone actually cares about my problem but i thought i post the answer up for anyone that might be struggling in future.
What was stopping my Bluetooth working with my car was having WiFi on. When i disable WiFi the car + phone works perfectly together. In my particular situation i use my phone to connect to an ad-hoc network, and because the phone is not connected to the ad-hoc when in my car the searching constantly is causing the problem. Whether this would be the same with infrustucture mode im not sure.
I was running the very first Nexus 5 port made by boykioy and I flashed the ROM with no issues at all and without having to flash a new radio or kernel. When the KOT49H update came out by the same person I flashed it and my phone went into a loop where I realized that I had to flash a new radio in order for the update to function. The radio I had flashed was the stock radio provided on a blog by the same person that created the ports. The name of the radio is the v.98 KOT49H stock radio. If you have ever used Bluetooth in your car or for an external speaker you might have realized that once you pair your device it remains paired and will connect automatically when Bluetooth is enabled and the speaker/car is on. This was the case for me until I flashed the new radio. Now when I first pair my device to my car stereo or any Bluetooth speaker it will pair and play perfectly fine. Even when I turn the car/speaker off and turn it back on it will automatically reconnect and play perfect. The issue comes when I turn off Bluetooth on my phone or turn my phone off and on again; the devices won't connect again and when I manually connect them the sound will glitch about every 10 seconds. But as soon as I unpair and delete the info ok my phone and re-pair it works perfect. If anyone has any solutions or ideas I'd be more than willing to try them. I couldn't attach a link to the blog but it's real simple: nexus4(period)techxeroblog(period)com