Question about flashing the unlocked OOS on an unlocked T-Mobile 6T - OnePlus 6T Questions & Answers

I've done a lot of reading and am still confused about something. I know that if you have a SIM unlocked T-Mobile, you can then unlock the bootloader. Once that's done, you can then flash the stock OOS to your T-Mobile device. But, what I'm confused about, is can I then take standard OTA's after flashing stock OOS? A couple of threads that I've read indicate that you can't take the OTA. I run linux on my computer so cant use the flashall.bat. Nor can I use the qualcom tool that I've read about since that's a Windows tool. So, what can I do? Can I use fastboot to flash a stock OOS version and then take OTA's afterwards? I haven't purchased my 6T yet. I like the cheaper prices of the T-Mobile version (can even get ones already unlocked) but I'm leary of not being able to take an OTA.

I can confirm that the TMO does indeed receive OTA (in my experience) after flashing international ROM. Mind you that TMO variant still doesn't have A10. If I were you, I'd buy an international variant of the phone. Since you use Linux, maybe install virtual machine to boot Windows or dual boot Linux.

zeloleoz said:
I can confirm that the TMO does indeed receive OTA (in my experience) after flashing international ROM. Mind you that TMO variant still doesn't have A10. If I were you, I'd buy an international variant of the phone. Since you use Linux, maybe install virtual machine to boot Windows or dual boot Linux.
Click to expand...
Click to collapse
What is A10?
They're the same exact phone except the international version has a dual SIM tray, T-Mobile version has a single SIM tray. From what I've read, you could take a dual SIM tray and put it in the tmobile version, and wallah, dual SIM 6T.
I bought the tmobile version, figured there was some sort of hardware difference to optimize it for tmobile, but nope, same darn phone.
---------- Post added at 10:54 PM ---------- Previous post was at 10:51 PM ----------
alfick3 said:
I've done a lot of reading and am still confused about something. I know that if you have a SIM unlocked T-Mobile, you can then unlock the bootloader. Once that's done, you can then flash the stock OOS to your T-Mobile device. But, what I'm confused about, is can I then take standard OTA's after flashing stock OOS? A couple of threads that I've read indicate that you can't take the OTA. I run linux on my computer so cant use the flashall.bat. Nor can I use the qualcom tool that I've read about since that's a Windows tool. So, what can I do? Can I use fastboot to flash a stock OOS version and then take OTA's afterwards? I haven't purchased my 6T yet. I like the cheaper prices of the T-Mobile version (can even get ones already unlocked) but I'm leary of not being able to take an OTA.
Click to expand...
Click to collapse
Once you flash over to the international version, you won't get updates from tmobile, but you will straight from the source, so you'll get the updates quicker.
Really no point in staying on the tmobile OOS.
I have to keep my phone rooted for certain apps, so there's like a couple of extra steps for me to take when updating. But if you're just planning on staying vanilla, you can update just fine.

I finally got my 6T. I found a nice, and nicely priced, 6 GB RAM 128 GB storage model on Swappa. And of course it's unlocked so now I don't have to worry about when I'll get updates from T-Mo.
Sent from my OnePlus6T using XDA Labs

Related

Want to Flash AT&T or Unlocked Firmware on T-Mobile Device - A Few Questions

So I've spent a few hours searching XDA to find the right resources on how to flash a different U.S. carrier's GS7 Edge firmware on the T-Mobile branded device. I found out that since all the internal hardware for all U.S. devices are identical, I'd be able to flash any one carrier's firmware on to any carrier's device, provided there are no inconsistencies with the bootloader versions of the firmwares.
The phone is intended for an extended family member and I am able to purchase a T-Mobile GS7 Edge for significantly cheaper than from any other carrier. Because it will be used on AT&T's network, I wanted to make sure I got everything right before I get started. I either want to flash the AT&T version which will allow it to be fully compatible on the network, or the Unlocked version. Apparently, the unlocked version is completely debloated since it's not associated with any carrier and provides better benchmarks, especially battery life, so I'm interested in that.
I've compiled the resources I need in the following:
https://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
https://forum.xda-developers.com/att-s7-edge/help/att-t-mobile-bootloader-version-t3473281
https://forum.xda-developers.com/tmobile-s7-edge/help/installed-sm-g935u-sm-g935t-firmware-t3482945
https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
https://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246
https://forum.xda-developers.com/verizon-s7-edge/how-to/odin-stock-nougat-firmware-t3570156
https://forum.xda-developers.com/att-s7-edge/how-to/updated-935u-935a-live-links-pi3-t3501686
http://updato.com/firmware-archive-select-model?q=SM-G935U&order=date&dir=desc&exact=1
etc.
One question I have is whether I am able to flash the Unlocked firmware at all. I don't currently have the device in hand so I can't check the baseband version, but my understanding is that the Unlocked version is currently on a lower bootloader version whereas it is v4 for AT&T or T.Mobile. This would mean I would be able unable to flash the Unlocked firmware if the device already has a higher version of the bootloader, right? Conversely, I would be able to do so if the T-Mobile bootloader was on the same version as the Unlocked version (e.g., if the device hasn't had an update to its bootloader).. The same issue would arise if I wanted to go back to a carrier firmware. Where can I find a list of T-Mobile firmwares and their bootloader versions so that I can check? Threads I've searched are saying I can't go to 935U from 935A/T because of mismatching bootloaders but others are saying I can go back to 935A/T on Nougat (same bootloader versions?) so clarification would be greatly appreciated.
Edit: Just discovered the bootloader version can be determined by looking at the 9th character in the baseband version. Pretty simple!
Another question I have is whether flashing the AT&T firmware will give me VoLTE, Wifi Calling, tethering, etc. on AT&T's network. I've established that if I flashed the Unlocked firmware, I'll lose these functions (unless I root the phone, but that's a no-go since I need Samsung Pay intact). Just wanted to make sure that I would retain these features if I flashed the AT&T firmware on the T-Mobile device. Also, would I receive all OTAs pushed from AT&T while I'm on their firmware, even though it was a T-Mobile device? Or would I have to manually update it somehow?
Many thanks in advance.
Yes you can flash the unlocked firmware, I do recommend flashing the at&t CP (radio) though for better signal.
For tmobile all we lose is video calling, we retain everything else. I can't answer your other questions since I have not used this phone from tmobile on at&t. I have used the at&t model on tmobile with U and had no issues.
Sent from my SM-G935U using XDA Premium HD app
justda said:
Yes you can flash the unlocked firmware, I do recommend flashing the at&t CP (radio) though for better signal.
For tmobile all we lose is video calling, we retain everything else. I can't answer your other questions since I have not used this phone from tmobile on at&t. I have used the at&t model on tmobile with U and had no issues.
Sent from my SM-G935U using XDA Premium HD app
Click to expand...
Click to collapse
^^^^^this man is correct. Also, is the device you want to flash Carrier unlocked? Even though youre flashing a different carriers firmware or even the U firmware I believe the IMEI still needs to be unlocked from the original carrier. Obviously just pop the at&t sim card in the t mobile phone to see if its unlocked. hope this helps.
black96ss said:
^^^^^this man is correct. Also, is the device you want to flash Carrier unlocked? Even though youre flashing a different carriers firmware or even the U firmware I believe the IMEI still needs to be unlocked from the original carrier. Obviously just pop the at&t sim card in the t mobile phone to see if its unlocked. hope this helps.
Click to expand...
Click to collapse
Yes, it'll be unlocked, so there won't be problems there. If I flash the AT&T firmware and not the Unlocked firmware, I will retain video calling, yes?
justda said:
Yes you can flash the unlocked firmware, I do recommend flashing the at&t CP (radio) though for better signal.
For tmobile all we lose is video calling, we retain everything else. I can't answer your other questions since I have not used this phone from tmobile on at&t. I have used the at&t model on tmobile with U and had no issues.
Sent from my SM-G935U using XDA Premium HD app
Click to expand...
Click to collapse
If I flash the current version of the Unlocked firmware, can I go back to AT&T's or T-Mobile's firmware?
Synchronicities said:
Yes, it'll be unlocked, so there won't be problems there. If I flash the AT&T firmware and not the Unlocked firmware, I will retain video calling, yes?
Click to expand...
Click to collapse
flashing the at&t firmware will just be like having an original at&t s7 edge so yes. The Unlocked firmware will be lighter with no video calling(no carrier apps, no carrier boot animation, some of the quick toggles will be different) you will retain VOLTE HD calling, wifi calling(if at&t has that) and with the at&t you will have all the bloat (about 2-3 GB of used storage plus more a tad bit more use on ram usage) which will use more battery. remember like stated above, if you do decide to flash the U firmware, make sure you flash the latest At&t CP being you will have better coverage since youll be on the at&t network.
Synchronicities said:
If I flash the current version of the Unlocked firmware, can I go back to AT&T's or T-Mobile's firmware?
Click to expand...
Click to collapse
I was able to flash back to T mobile from the U, I never tried anything with a At&t variant or the at&t firmware
I am also interested. If I flash
1) Will the device status remain "Unmodified" - I use Good for Enterprise for work email and it won't function on rooted or modified devices
2) Will Android Pay Work?
3) Will I get Software updates directly?
cnewsgrp said:
I am also interested. If I flash
1) Will the device status remain "Unmodified" - I use Good for Enterprise for work email and it won't function on rooted or modified devices
2) Will Android Pay Work?
3) Will I get Software updates directly?
Click to expand...
Click to collapse
Can someone review and comment?
---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
black96ss said:
flashing the at&t firmware will just be like having an original at&t s7 edge so yes. The Unlocked firmware will be lighter with no video calling(no carrier apps, no carrier boot animation, some of the quick toggles will be different) you will retain VOLTE HD calling, wifi calling(if at&t has that) and with the at&t you will have all the bloat (about 2-3 GB of used storage plus more a tad bit more use on ram usage) which will use more battery. remember like stated above, if you do decide to flash the U firmware, make sure you flash the latest At&t CP being you will have better coverage since youll be on the at&t network.
I was able to flash back to T mobile from the U, I never tried anything with a At&t variant or the at&t firmware
Click to expand...
Click to collapse
Does Android Pay work on "U" firmware?
Should I get CP from here => https://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
I this a good thread for instructions to install U firmware on T => https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
cnewsgrp said:
Can someone review and comment?
---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
Does Android Pay work on "U" firmware?
Should I get CP from here => https://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
I this a good thread for instructions to install U firmware on T => https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
Click to expand...
Click to collapse
Yes and yes
Sent from my SM-G955U1 using XDA-Developers Legacy app
cnewsgrp said:
I am also interested. If I flash
1) Will the device status remain "Unmodified" - I use Good for Enterprise for work email and it won't function on rooted or modified devices
2) Will Android Pay Work?
3) Will I get Software updates directly?
Click to expand...
Click to collapse
I Flashed an AT&T S7 Edge with T-Mobile firmware and:
1) Status remains unmodified
2) Android pay works (as well as Samsung pay)
3) I've already got 2 T-Mobile pushed firmware updates that installed without any issues.
Don't know if this helps, but I'd think it would be the same going from T-Mobile to AT&T.
I did also have to use a modified version of "ODIN" and flash a "PIT" file because T-Mobile has a different partition than AT&T.
pierre3408 said:
I Flashed an AT&T S7 Edge with T-Mobile firmware and:
1) Status remains unmodified
2) Android pay works (as well as Samsung pay)
3) I've already got 2 T-Mobile pushed firmware updates that installed without any issues.
Don't know if this helps, but I'd think it would be the same going from T-Mobile to AT&T.
I did also have to use a modified version of "ODIN" and flash a "PIT" file because T-Mobile has a different partition than AT&T.
Click to expand...
Click to collapse
Thanks! I am almost ready. Final checks
- I downloaded 935U firmware from here https://forum.xda-developers.com/tmobile-s7-edge/how-to/4-28-t-mobile-935-firmware-t3597866 (File is G935UUEU4BQD2_G935UOYM4BQD2_TMB.zip)
- I am planning to use ODIN 3.12.7
- Since I am on ATT Network I will use ATT Radio (CP File). I downloaded ATT firmware from here => https://forum.xda-developers.com/att-s7-edge/how-to/odin-files-to-s4bqc2-g935a-t3582874
I will use this CP => CP_G935AUCS4BQC2_CL10280464_QB12904088_REV02_user_low_ship_MULTI_CERT.tar
Am I doing everything right?
Should I just flash all U files (including Radio) and flash ATT Radio later?
Please advise
Hi team
I have the tmo ime version of the s7 edge, but flash the ATT firmware BQC2 and now I can not go back to tmobile firmware or the U firmware I got the following error in Odin:
Error device info
Who can help me,?I going to gift my s7 edge to my brother and he is on Tmobile network
Galaxy S7 active
I have a at&t Galaxy S7 active unlocked and i transfer my service to T-Mobile but I am not able to get updates can I flash T-Mobile firmware so I can have the T-Mobile interface and updates. What do I need to do to get the updates.
All US variants can flash the firmware interchangeably. Just download the corresponding firmware and flash everything(Except for the modem if you'd want to keep the original modem). You dont need anything special. If the default odin dont work, then try the comey "cracked" version.
Eric1084 said:
All US variants can flash the firmware interchangeably. Just download the corresponding firmware and flash everything(Except for the modem if you'd want to keep the original modem). You dont need anything special. If the default odin dont work, then try the comey "cracked" version.
Click to expand...
Click to collapse
Why is it that we use the CP for AT&T; however, use the Unlocked CP for TMobile? Are the radios the same for the unlocked and T-Mobile variants? Where would I get this information if I needed it in the future?
I have a GS7 edge locked to T-Mobile with the Device Unlock app. Will flashing G9350U firmware unlock my device and bypass the Device Unlock app or will I still need to use this app to unlock?
Radios are different. I flashed ATT Radio after I flashed U firmware. Though honestly I cannot tell the difference
cnewsgrp said:
Radios are different. I flashed ATT Radio after I flashed U firmware. Though honestly I cannot tell the difference
Click to expand...
Click to collapse
you did the sae thing that I am currently doing. going from tmobile (I believe) to AT&T firmware. I am going from verison (which shouldn't matter) but when I did it the first time odin 3.12.7 gave me a message of success after only one "sector" of the whole thing went green. but the phone rebooted to an error message. did I do something wrong? help??
Shadow_Sheik said:
you did the sae thing that I am currently doing. going from tmobile (I believe) to AT&T firmware. I am going from verison (which shouldn't matter) but when I did it the first time odin 3.12.7 gave me a message of success after only one "sector" of the whole thing went green. but the phone rebooted to an error message. did I do something wrong? help??
Click to expand...
Click to collapse
Sorry not an expert, but I read several times here to use Price COmsy ODIN and I use that one. Please try
OTA Update is not working after changing to U firmware.
I had stock T Mobile last firwmare installed, but I was sick of poor battery and lag
so installed this firmware https://forum.xda-developers.com/tmobile-s7-edge/how-to/6-8-t-mobile-935u-firmware-qe2-t3619151, full wipe.
Now I have worst battery performance. 12% draining overnight (6 hours) without touching the phone at all. It shows a new update but it fails when I OTA update. looks like the update it's being installed but fails at the end. Don't know what's wrong but totally hate battery.
Edit: Android pay is also not working..
pierre3408 said:
I Flashed an AT&T S7 Edge with T-Mobile firmware and:
1) Status remains unmodified
2) Android pay works (as well as Samsung pay)
3) I've already got 2 T-Mobile pushed firmware updates that installed without any issues.
Don't know if this helps, but I'd think it would be the same going from T-Mobile to AT&T.
I did also have to use a modified version of "ODIN" and flash a "PIT" file because T-Mobile has a different partition than AT&T.
Click to expand...
Click to collapse
What pit file did you flash? Did you flash the the pit file Odin pulls from your phone? Did you flash an att specific pit file?

Unbranding h910 AT&T

Hi.
I am expecting delivery of an LG V20 h910 from eBay in the coming days, but don't have an AT&T SIM (EU user).
Is there a way to flash an unlocked, stock version of the software (eg US996) so I can update the phone to the latest version?
I heard non-AT&T SIM users don't get updates thru AT&T, so wondering how I can get the latest software for it.
I would prefer not to root the phone, but would do if necessary (and if I can then get a fully functional, up-to-date software version).
Thanks in advance.
AWT86 said:
Hi.
I am expecting delivery of an LG V20 h910 from eBay in the coming days, but don't have an AT&T SIM (EU user).
Is there a way to flash an unlocked, stock version of the software (eg US996) so I can update the phone to the latest version?
I heard non-AT&T SIM users don't get updates thru AT&T, so wondering how I can get the latest software for it.
I would prefer not to root the phone, but would do if necessary (and if I can then get a fully functional, up-to-date software version).
Thanks in advance.
Click to expand...
Click to collapse
First off, if its not sim unlocked phone, it will forever stay sim locked unless you get the network unlock for it. EVEN if you flash any of the other brand roms. Also, AT&T doesn't have the full stock kdz to revert to, there are work arounds to return to stock. This phone has trouble with the screen ghosting/retention, as well as bonkers HDR camera performance, also not to forget, GPS inaccuracy upto 50 meters. I'd suggest look away from LG unless you're going for LG v30 which doesn't carry any of these issues.
If you have already bought, paid and "expecting" shipment anytime soon, you should make sure that its network unlocked H910. (make backup of your partitions before flashing any other brand rom because you will need modem, modemst1, modemst2 and misc partitions in-case you lose the signals). Then you can easily flash it with H915 rom which is the best among debloated stock roms. Flash H910 v10m firmware over it, then flash the modem/modemst1/modemst2/misc files from fastboot to get network signal. From there on forward, you may keep H915 rom with H910 v10m base, or you can even move on to lineage roms. I'd suggest stay rooted with manual color calibration for no-ghosting measures.
AWT86 said:
Hi.
I am expecting delivery of an LG V20 h910 from eBay in the coming days, but don't have an AT&T SIM (EU user).
Is there a way to flash an unlocked, stock version of the software (eg US996) so I can update the phone to the latest version?
I heard non-AT&T SIM users don't get updates thru AT&T, so wondering how I can get the latest software for it.
I would prefer not to root the phone, but would do if necessary (and if I can then get a fully functional, up-to-date software version).
Thanks in advance.
Click to expand...
Click to collapse
You can't flash another variant rom until you unlock the bootloader and root. As far as functionality with the 996 will depend on the bands your carrier supports
Sent from my LG-H910 using XDA Labs
I received my used AT&T V20 yesterday also bought from eBay. I'm on O2 and it works fine. Just be sure your phone is network unlocked. Only thing is the bloatware.
So much misinformation in this thread, but I will just address the original question....
Yes, you can flash the US996 KDZ without rooting .. just flash like you would any other KDZ. You lose some AT&T specific features while running US996, but if you are overseas, I don't think that will bother you.
As far as I know, that will SIM unlock the phone if it is locked. If it doesn't, then the engineering bootloader that you use to root will SIM unlock the phone as well as bootloader unlock it.
So, first try the US996 KDZ, if that doesn't SIM unlock, you will have to root.
-- Brian
CaseyS said:
I received my used AT&T V20 yesterday also bought from eBay. I'm on O2 and it works fine. Just be sure your phone is network unlocked. Only thing is the bloatware.
Click to expand...
Click to collapse
Did you get any system updates?
runningnak3d said:
So much misinformation in this thread, but I will just address the original question....
Yes, you can flash the US996 KDZ without rooting .. just flash like you would any other KDZ. You lose some AT&T specific features while running US996, but if you are overseas, I don't think that will bother you.
As far as I know, that will SIM unlock the phone if it is locked. If it doesn't, then the engineering bootloader that you use to root will SIM unlock the phone as well as bootloader unlock it.
So, first try the US996 KDZ, if that doesn't SIM unlock, you will have to root.
-- Brian
Click to expand...
Click to collapse
The phone should come pre-unlocked for all networks. I'm mainly concerned about system updates. US996 sounds good, as I can't use AT&T here (AT&T doesn't exist in my country). Would I be able to update the firmware in any way once US996 KDZ is installed? Thanks in advance.
AWT86 said:
Did you get any system updates?
Click to expand...
Click to collapse
No system updates. Had the latest update with the latest security patch, but I downgraded because I want to root it. Still 7.0, but with a earlier patch level.

Which model is the easiest bootloader unlock and candidate for Lineage OS?

I've seen the US996 official unlock, but I want to know if anyone of these are preferable since they are easiest to find second-hand:
T-Mobile
AT&T
Verizon
Thanks in advance.
Gorilla Daddy said:
I've seen the US996 official unlock, but I want to know if anyone of these are preferable since they are easiest to find second-hand:
T-Mobile
AT&T
Verizon
Thanks in advance.
Click to expand...
Click to collapse
T-mobile process (technical version and skips some details). Same process, but reworded and simplified (and includes ALL the details).
T-mobile (and the factory unlocked US996) let's you actually unlock the bootloader so it takes a bit less time to boot (the other models sit longer at a bootloader locked warning, but they use an engineering bootloader that eventually continues booting)
The ATT is a pain to root too, because there are no firmware files available for it thanks to ATT deciding to use a different OTA format. It's process involves crossflashing then flashing back some att firmware.
(you didn't ask but) Sprint's is unrootable. (if it's taken an OTA anytime in the past 2.5 YEARS or so, so basically 95% of them) (thank Sprint for doing such a great job locking it down! Wouldn't want people extending the useful life of their phones!)
The rest all involve using the LG UP program mentioned and linked in those other guides above in upgrade mode to downgrade to a firmware released in January 2017 or earlier (it needs to have the December 2016 android security patch or earlier) and do an exploit to install an engineering bootloader.
The Verizon model uses the above process but the vibration motor will run continuously when booting until a custom kernel is installed iirc
The international model (H990) uses the above process with a few minor tweaks to get it working
The Verizon and AT&T can be flashed with us996-usa KDZ and then rooted using dirtysanta. This gets rid of verizon vibrate on boot issue and bloatware on both. And AT&T network restrictions.
Sent from my LGE LG-US996 using XDA Labs
ezzony said:
The Verizon and AT&T can be flashed with us996-usa KDZ and then rooted using dirtysanta. This gets rid of verizon vibrate on boot issue and bloatware on both. And AT&T network restrictions.
Click to expand...
Click to collapse
Thanks. Does that mean that a network SIM locked AT&T or Verizon model gets SIM unlocked when we flash us996-usa KDZ?
Gorilla Daddy said:
Thanks. Does that mean that a network SIM locked AT&T or Verizon model gets SIM unlocked when we flash us996-usa KDZ?
Click to expand...
Click to collapse
NO. It would be nice if it were that easy.
Edit: I would also suggest that if you have a code to unlock your fone do it while it has the carrier locked firmware as a precaution.
Several us996 on fleabay right now
Sent from my LG-US996 using XDA-Developers Legacy app
If you're going to use Lineage I recommend Resurrection Remix instead, it runs better in my experience than Lineage does, but your usage may vary.

T Mobile One Plus 6T Unlocked and Bootloader unlockef

I'm just having a really hard time finding an answer. I just had a OnePlus 6T T Mobile edition find it's way to me. It's carrier unlocked and Bootloader unlocked and it's running the latest T Mobile version 10 OOS. Since the bootloader is unlocked, can I just flash the latest non T Mobile OOS Android 10 version to it? In other words the US 6T edition? Or must I use the international version? I'm really confused and sure this has to be answered somewhere but just can't find it. Can anyone help and point me in the right direction? I have lots of experience flashing ROMs, but this one has me stumped at this point. Thanks.
I'm no expert... lol, but based on what I do know, I believe these are your steps...
So I'd take a look at this post-
[T-Mobile / Guide] - Full SIM and Bootloader Unlock + Root for locked devices
Background: I am writing this short guide for people like me that want all the info about the T-Mobile 6T unlock capabilities. None of this is my work. I wanted to have a central thread where T-Mobile users can discuss the T-Mobile specifics of...
forum.xda-developers.com
Follow Step 4, and then from that point allow the ROM to update via OTAs. The MSMDownloadTools are basically a fix-all, but set you back in time update-wise.
I do not believe there's a full TMo ROM for the latest updates, but once again, I could be wrong.
You could also use the International Version if you want, that is what I am running now, but if you want root access, I believe getting 11 working has some extra steps/workarounds (so i'm still on 10)
I initially changed to International because of quicker security updates and it works fine, no issues to complain about, but my wife (on TMo stock) seems to get better signal than I do in more rural areas.
Fenopy said:
I'm no expert... lol, but based on what I do know, I believe these are your steps...
So I'd take a look at this post-
[T-Mobile / Guide] - Full SIM and Bootloader Unlock + Root for locked devices
Background: I am writing this short guide for people like me that want all the info about the T-Mobile 6T unlock capabilities. None of this is my work. I wanted to have a central thread where T-Mobile users can discuss the T-Mobile specifics of...
forum.xda-developers.com
Follow Step 4, and then from that point allow the ROM to update via OTAs. The MSMDownloadTools are basically a fix-all, but set you back in time update-wise.
I do not believe there's a full TMo ROM for the latest updates, but once again, I could be wrong.
You could also use the International Version if you want, that is what I am running now, but if you want root access, I believe getting 11 working has some extra steps/workarounds (so i'm still on 10)
I initially changed to International because of quicker security updates and it works fine, no issues to complain about, but my wife (on TMo stock) seems to get better signal than I do in more rural areas.
Click to expand...
Click to collapse
Thanks for the input. I have seen all those threads, but the main purpose there was for people who did not want to wait for the SIM unlock. That got them past that and also got them so they were able to unlock the bootloader. I already have an unlocked SIM and unlocked bootloader. So I know I could load up lineageos if I wanted to without doing anything special. I would think I should be able to use TWRP to put the International version on using TWRP. And maybe the US version. But that may not be the case.
It just seems like any work on this device stopped after the above. Of course once you are bootloader unlocked, there may not be need for much more and people may just move on to other ROMs.
Thanks.
Fenopy said:
I'm no expert... lol, but based on what I do know, I believe these are your steps...
So I'd take a look at this post-
[T-Mobile / Guide] - Full SIM and Bootloader Unlock + Root for locked devices
Background: I am writing this short guide for people like me that want all the info about the T-Mobile 6T unlock capabilities. None of this is my work. I wanted to have a central thread where T-Mobile users can discuss the T-Mobile specifics of...
forum.xda-developers.com
Follow Step 4, and then from that point allow the ROM to update via OTAs. The MSMDownloadTools are basically a fix-all, but set you back in time update-wise.
I do not believe there's a full TMo ROM for the latest updates, but once again, I could be wrong.
You could also use the International Version if you want, that is what I am running now, but if you want root access, I believe getting 11 working has some extra steps/workarounds (so i'm still on 10)
I initially changed to International because of quicker security updates and it works fine, no issues to complain about, but my wife (on TMo stock) seems to get better signal than I do in more rural areas.
Click to expand...
Click to collapse
The more I search, I guess that it appears there are some privileged partitions. This method you mention gets around that irrespective of the SIM and Bootloader being unlocked already.... Sigh....

OnePlus 6t fully bricked

Hello, I tried to install the stock rom but it seems to brick the phone, now it only loads the fastboot mode and when I try to install the TWRP it only stays on the fastboot screen and does not go beyond
I tried to use MSMDownloader but when I hit start I get the error "images do not match with the phone"
What version of MSMDownloader are you using? I'm assuming you are using a T-Mobile branded 6T, as I get the same issue with the global packages. Try following this guide and using the 4.0.58 version and it's patch. That should let you get around the error.
T-Mobile 6T to International Conversion (WITHOUT unlocked bootloader/SIM unlock!)
In the previous thread, we discussed a method to convert T-Mobile 6T's to the international variant, sort of, but it required an unlocked bootloader, which itself requires a SIM unlock which T-Mobile gives people a hard time about. However, it...
forum.xda-developers.com
izzy001 said:
What version of MSMDownloader are you using? I'm assuming you are using a T-Mobile branded 6T, as I get the same issue with the global packages. Try following this guide and using the 4.0.58 version and it's patch. That should let you get around the error.
T-Mobile 6T to International Conversion (WITHOUT unlocked bootloader/SIM unlock!)
In the previous thread, we discussed a method to convert T-Mobile 6T's to the international variant, sort of, but it required an unlocked bootloader, which itself requires a SIM unlock which T-Mobile gives people a hard time about. However, it...
forum.xda-developers.com
Click to expand...
Click to collapse
Mine is dual Sim, will using the T-MOBILE version limit that function?
Saicoo said:
Mine is dual Sim, will using the T-MOBILE version limit that function?
Click to expand...
Click to collapse
That I do not know, but it should allow you to flash any fastboot images as if it was a unbranded version. If that does not work then I'd try some of the Android 9 versions of the MSMDownload tool.
izzy001 said:
That I do not know, but it should allow you to flash any fastboot images as if it was a unbranded version. If that does not work then I'd try some of the Android 9 versions of the MSMDownload tool.
Click to expand...
Click to collapse
Well I did what he told me and it worked, I returned to android 9 thank you very much

Categories

Resources