Broken phone screen, can i control my phone from my computer? - Windows 10, 8, 7, XP etc.

As the title says, I broke my phone screen (Samsung galaxy 8+) and the phone still turns on and I can use the screen for a short period of time and then the pixels die and the screen goes black. And I can't really open it long enough to allow USB to be authorised on my computer to move files off of it (i now regularly back up my new phone....).
So can I somehow get access to the content of my phone either by pc control or direct HDD access? I can unlock the screen but that's about it before it goes black.
Cheers.

I posted here because it seemed like the most general place to get an answer? =]

You can't debugging must be on to access phone data
Sent from my SM-N950U using Tapatalk

Related

Screed died. Need pictures.

So, the screen died on my Vibrant yesterday. I am going to get a warranty replacement, but I need to get the camera pictures from the internal flash card. It still responds to touch, but the screen is black. What would be the easiest way to get the pictures off? I had it set to prompt on USB connection, but I can't seem to hit the USB Storage option.
*EDIT*
I managed to tap the USB storage button.
You just randomly tap until you hit it. ._.
^ use your... sensory?? skills????
Tap where you think is - i don't even know.
Use vibrant AIO tool box you can download anything you want off your phone l.
Sent from my GT-I9000 using XDA Premium App
Android screen cast will also work. Shows your phone screen on your pc.
Beware of angry gingerbread man

Cracked screen, any way to see screen on desktop?

Dropped phone, screen + digitizer is broken. I have never rooted my phone. I didn't put a screen lock luckily, and I know the USB debugger is off.. Is there any way I can still download an app or do something via the android manager on my computer remotely to see my phone's screen on my mac?

Broken Screen with Trapped Data

Long and short of it is a company replaced a shattered screen. Then, the new screen began to peel away and then the connection became so bad that the screen is not functional. I just get a blank screen. I need to rip all of that data off the old phone so I can back it up and put it on a new phone (courtesy of the company that replaced the screen).
Here's where it gets tricky. The USB connection mode is charge only. I need to set it to MTP, but can't because the screen has lost all functionality. Without MTP, neither Android File Transfer nor Smart switch can't connect to the phone. I think Sidesync would work, but I can't install it on my phone.
An MHL cable won't help because it mirrors what is on the screen, but I can't select anything....
Are there any tricks out there that can help me before I have to send the old phone back in?
Thanks in advance!
You'll have to try fixing it temporarily . youtube has some good info
andyking33 said:
Long and short of it is a company replaced a shattered screen. Then, the new screen began to peel away and then the connection became so bad that the screen is not functional. I just get a blank screen. I need to rip all of that data off the old phone so I can back it up and put it on a new phone (courtesy of the company that replaced the screen).
Here's where it gets tricky. The USB connection mode is charge only. I need to set it to MTP, but can't because the screen has lost all functionality. Without MTP, neither Android File Transfer nor Smart switch can't connect to the phone. I think Sidesync would work, but I can't install it on my phone.
An MHL cable won't help because it mirrors what is on the screen, but I can't select anything....
Are there any tricks out there that can help me before I have to send the old phone back in?
Thanks in advance!
Click to expand...
Click to collapse
You can try and take a phone with the same os. If you have 2 computers its best (maybe one laptop or something). Turn both the phones off and connect them both to the computers and turn them both on. Look at the one that you see his screen and press the same places on your phone..
Sent from my OnePlus3 using XDA Labs
I'm in the same boat, have you found a way?

Can I diagnose a phone with smashed screen?

A friend of mine lost his S4 I337m, but found it again after it had been run over by a car. I'm trying to determine if it's worth trying to replace the LCD or if there's other damage.
The LCD is just tiny shards of glass (I'm betting it was face down when run over) but while he didn't find the back cover, the mid frame is in good condition and after removing it, the boards don't have any obvious damage.
If I try to turn it on, it vibrates and the LED pulses blue. Then a bit later it does a longer vibraton and the LED flashes blue. It seems like it's powered up.
If I try to connect to Kies, it just says "connecting" forever and the LED turns red. Maybe it's prompting me to unlock the phone? There's no message from Kies to that effect though.
As I've never used this model of phone before, I have no idea what the normal behavior is. Are there any tools I can use via USB to check the "health" of the phone?
FYI, I'm pretty familiar with flashing Android phones (mainly Nexus devices) and have replaced the screen on a Nexus 5, so I'm not afraid of a challenge. I'm guessing this phone is stock, so probably have a locked bootloader and USB debugging disabled, so I'm not sure if I can expect much. Obviously without a screen I can't do much. Also, he pulled the SIM and SD card, not sure if that matters.
I'm going to try connecting using ODIN next.
I actually was in the same situation as you are about an hour ago. I was able to unlock my phone by using a USB OTG adapter to connect my keyboard to enter in the pin and unlock it. After that I was able to access my files, so i just kept taking screenshots while i navigated my phone using my keyboard - installed SideSync, accepted the permissions, and finally - was able to mirror my phone to my computer.
If your phone vibrates, and the LED works, then try testing the button three buttons when you have the phone on. the red LED light is only on when the phone is either powered off and charging, or the phone is powered on with the screen off and charging, so if tapping the power button changes between seeing the red LED and not (and a small vibration when tapping the back or window button) then that should mean it's just the lcd+digitizer
Anyway, feel free to ask me about any behavior about a working s4 with a broken screen, one more week until my replacement comes in the mail

Samsung S8 screen gone black and unusable

Hi,
My girlfriend has a Samsung s8 and the screen has gone black and we can not see the screen. We are still getting notifications but no screen.
The thing is she needs to access the phone to retrieve images and videos of our 5 month old. Also to access texts to access her bank account and Facebook gmail etc.
I have looked on net and been told to put in debugging mode and connect to pc but I can't see the screen so I can't do that, I have been told to put it in download mode to use some software to do it but I can't put in download mode.
Anyone any ideas to wither mirror the phone to pc and use on pc or put in download mode without using the buttons or screen of the phone.
Thanks
Sounds like the digitiser is broken.
Don't think there's a way to mirror the screen without downloading an app or changing system settings I'm afraid. Your girlfriend should still have warranty on the phone though, so I'd say send it to Samsung for them to fix it. Unless the device was dropped or tampered with and/or there's visible damage that's the way to go I guess.
Jaffabfc said:
Hi,
My girlfriend has a Samsung s8 and the screen has gone black and we can not see the screen. We are still getting notifications but no screen.
The thing is she needs to access the phone to retrieve images and videos of our 5 month old. Also to access texts to access her bank account and Facebook gmail etc.
I have looked on net and been told to put in debugging mode and connect to pc but I can't see the screen so I can't do that, I have been told to put it in download mode to use some software to do it but I can't put in download mode.
Anyone any ideas to wither mirror the phone to pc and use on pc or put in download mode without using the buttons or screen of the phone.
Thanks
Click to expand...
Click to collapse
James160103 said:
Sounds like the digitiser is broken.
Don't think there's a way to mirror the screen without downloading an app or changing system settings I'm afraid. Your girlfriend should still have warranty on the phone though, so I'd say send it to Samsung for them to fix it. Unless the device was dropped or tampered with and/or there's visible damage that's the way to go I guess.
Click to expand...
Click to collapse
My thoughts exactly

Categories

Resources