Related
Hello everyone,
i just flashed the newest Pure Nexus Rom and everything went fine.
I forgot to flash the SuperSU Zip so i tried to got back into TWRP, but now it stuck.
The System boots normally, only TWRP wont boot.
Anyone had that problem too?
if anyone else has the same issue, here is the answer:
I forgot to erase the userdata or cache.
If you have the same problem use fastboot!
fastboot format cache
fastboot format userdata
Then it should work again.
(Everything on your own risk)
If you dont flah SuperSU asap, TWRP will not stick on reboot (w nougat). That was the issue.
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
Exactly. It happened before you flashed SuperSU zip. Not flashing SuperSU caused your problem. It needs to be flashed the first time you go into TWRP or you won't be able to boot back into TWRP. The previous poster is correct.
Maybe we talk about different problems
Ive formatted cache and userdata yesterday,
now i can go back into twrp.
(SuperSU is not flashed now).
Just tried it, works perfectly!
kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
I never, ever flash userdata, and never had an issue.
We can agree to disagree. Either the other poster and I arent understanding your question, or you arent understanding our reply. It's cool, it happens.
But TWRP not sticking is due to not running SuperSU at the end of the install process. It wont stick.
And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing
kaufikauf said:
And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing
Click to expand...
Click to collapse
You should take a look at this post in the official TWRP thread for a clearer reason why.
SlimSnoopOS said:
You should take a look at this post in the official TWRP thread for a clearer reason why.
Click to expand...
Click to collapse
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?
USFguy said:
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?
Click to expand...
Click to collapse
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....
USFguy said:
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....
Click to expand...
Click to collapse
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Tried that, ended up going down an update in TWRP and it worked, weird....
I had a similar issue and I had to go back in and reflash Recovery image to recovery partition and all was well
I was using the latest WETA rom without any issues and decided to try to get Magisk working. I kept getting Error 1 when I tried installing Magisk so I tried to flash a boot img to make it work. I flashed the boot img then magisk without error but when I tried to boot I've been stuck on the LG logo.
What do I do?! I really don't want to lose my data on my internal storage.
changstalicious said:
I was using the latest WETA rom without any issues and decided to try to get Magisk working. I kept getting Error 1 when I tried installing Magisk so I tried to flash a boot img to make it in in work. I flashed the boot img then magisk without error but when I tried to boot I've been stuck on the LG logo.
What do I do?! I really don't want to lose my data on my internal storage.
Click to expand...
Click to collapse
Latest and weta rom is a contradiction, weta has been abandoned for a long long time. anyhow reflash the weta rom zip in twrp.
Phoenix591 said:
Latest and weta rom is a contradiction, weta has been abandoned for a long long time. anyhow reflash the weta rom zip in twrp.
Click to expand...
Click to collapse
lol, it's still the latest.
and I tried that and it still stayed on the LG logo
changstalicious said:
lol, it's still the latest.
and I tried that and it still stayed on the LG logo
Click to expand...
Click to collapse
What boot.img did you flash anyway? That might help further. In the meantime try flashing a different kernel, like mk2000.
Phoenix591 said:
What boot.img did you flash anyway? That might help further. In the meantime try flashing a different kernel, like mk2000.
Click to expand...
Click to collapse
i flashed the one here
https://forum.xda-developers.com/v20/help/help-lg-v20-us996-boot-img-t3528978
(https://build.nethunter.com/misc/us996/v10d/?C=N&O=D)
and i also tried
https://forum.xda-developers.com/v20/help/us996-boot-img-magisk-t3692119
(https://mega.nz/#!SZoQBITQ!PUl1Q4wFb2rVMv8qzbf8p1Jp6yp8sFwRLSW8LnrszaM)
I have a nandroid recovery with the data and system partitions but it wont boot and stays stuck on logo.
can you get into download mode or twrp?
If using twrp recovery using a full rom and make sure the zip for both system and boot match, make a full backup of your data using twrp.
If using download mode, you can flash a full kdz for your phone phone most likely losing root and twrp recovery. And this method will most likely wipe your data partition.
and whatever you do do not touch or modify the aboot partition.
I'm on OxygenOS 5.1.7 (Android 8.1) with unlocked bootloader but stock recovery, coming from full OTA update on rooted OOS 5.1.5, crypted data.
If I try to flash recovery (tried many version, last one is TWRP 3.2.3 siankatabg) from fastboot the flash works with "OKAY" and "Finished" messages, but too quickly (0.013s for writing), and it doesn't actually install TWRP. After reboot I'm still on stock recovery.
I tried to flash full 5.1.7 zip again. It went well, but too quickly, and didn't solve the problem.
How can I fix without having to format data?
nicari92 said:
I'm on OxygenOS 5.1.7 (Android 8.1) with unlocked bootloader but stock recovery, coming from full OTA update on rooted OOS 5.1.5, crypted data.
If I try to flash recovery (tried many version, last one is TWRP 3.2.3 siankatabg) from fastboot the flash works with "OKAY" and "Finished" messages, but too quickly (0.013s for writing), and it doesn't actually install TWRP. After reboot I'm still on stock recovery.
I tried to flash full 5.1.7 zip again. It went well, but too quickly, and didn't solve the problem.
How can I fix without having to format data?
Click to expand...
Click to collapse
Have you flashed magisk after reboot to twrp recovery? Otherwise oxygenOS will overwrite twrp with stock recovery on its first reboot.
strongst said:
Have you flashed magisk after reboot to twrp recovery? Otherwise oxygenOS will overwrite twrp with stock recovery on its first reboot.
Click to expand...
Click to collapse
I'm not able to reboot to TWRP! Just after flashing it, if I "fastboot reboot recovery" it reboots to stock recovery
nicari92 said:
I'm not able to reboot to TWRP! Just after flashing it, if I "fastboot reboot recovery" it reboots to stock recovery
Click to expand...
Click to collapse
Maybe you've missed some steps earlier to the flashing of twrp. Check this guide https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
If you have further issues, please post a console log of the commands you typed and the errors if there are any.
strongst said:
Maybe you've missed some steps earlier to the flashing of twrp. Check this guide https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
If you have further issues, please post a console log of the commands you typed and the errors if there are any.
Click to expand...
Click to collapse
Solved! I was doing "reboot recovery" instead of "boot recovery.img". Noob mistake
Thanks!
you need to flash Magisk before rebooting from TWRP
I am following all the steps in guide but when i try to install TWRP by siankatabg it keeps me looping back to fastboot.
Not facing any issues if i install normal TWRP recovery.
login22 said:
I am following all the steps in guide but when i try to install TWRP by siankatabg it keeps me looping back to fastboot.
Not facing any issues if i install normal TWRP recovery.
Click to expand...
Click to collapse
You should edit your post cause you already solved it by your own.
I am stuck at encryption failed when I flash stock oreo rom. I tried formatting data using twrp and flashed no encryption file as well but nothing works.:crying::crying::crying:
I just want to use the stock oreo rom again with root.
Pls help:crying:
Which ROM did you try and flash / install?
Try upgrading your TWRP to the latest version too.
jl10101 said:
Which ROM did you try and flash / install?
Try upgrading your TWRP to the latest version too.
Click to expand...
Click to collapse
I used partition dl mode to flash the stock oreo rom over 7.0 to keep the root. Then i flashed custom kernal for stock 8.0 but it didnt work. I have done the same procedure before and it has worked like a charm. But it keeps on giving the encrytion error when i try it now
Deadmeat03 said:
I used partition dl mode to flash the stock oreo rom over 7.0 to keep the root. Then i flashed custom kernal for stock 8.0 but it didnt work. I have done the same procedure before and it has worked like a charm. But it keeps on giving the encrytion error when i try it now
Click to expand...
Click to collapse
Odd. If I had to guess anything, it would be that not all the partitions were flashed when going from Nougat to Oreo.
I once flash a Nougat ROM from an Oreo ROM and I had the same encryption issue and lost everything.
That was the last time I would trust myself again and not do a backup.
Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track...
Prowler_gr said:
Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track...
Click to expand...
Click to collapse
I tried that as well. With stock recovery is says data is corrupted and doesn't do anything. I think it might be a problem with patched lg up because when i use normal lg up to flash oreo it works. But I cant root then.
I would try changing to 3.2.3-4 TWRP and then trying the procedure again. It seems that the 3.3.0 TWRP does not decrypt properly sometimes.
In the same boat as OP
scottyrick said:
I would try changing to 3.2.3-4 TWRP and then trying the procedure again. It seems that the 3.3.0 TWRP does not decrypt properly sometimes.
Click to expand...
Click to collapse
Hi
Looking for a way to keep TWRP and root ... any help appreciated
I've got a US996 with the same issue as the op. I have the latest TWRP 3.3.1-0. The phone was working fine until I upgraded twrp but I might have done a mistake resetting phone outside of twrp.
I can still get back into twrp but I haven't been able to install zip files without getting that decryption unsuccessful message when booting to system.
When getting back into TWRP using hardware buttons sometimes there is a prompt asking "keep system read only?" which I never chose and swipe to allow modification. I think this happens after
I pull the battery after getting the decryption unsuccessful message. There is a reset system that I could chose under the decryption unsuccessful message but I'm assuming that will make me lose twrp
...but if my phone is a us996 and is still
unlocked, would it matter if I did select it? Wouldn't I be able to reinstall twrp using adb again on a computer after Oreo is reinstalled?
To do Prowler_gr's suggestion which guide do I follow (sounds like I should do the second option)
"Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track... "
1-[GUIDE][UNBRICK] Patch LGUP to unlock features & unbrick V20 (Variant mismatch fix) to use lgup
or this guide
2-Ultimate guide to unbrick LG V20(Only Variants with .KDZ)[No OS Firmware Update Loop]
Thank you for any guidance on this...
There is a reset system that I could chose under the decryption unsuccessful message but I'm assuming that will make me lose twrp
Click to expand...
Click to collapse
Don't blame me if this goes wrong but I'm pretty much 100% certain that you mush press the rest button. This has happened to me a few times I'm sure. You won't loose twrp. Whatever resetting goes on in the background I don't think it's an actual Factory Reset.
Edit: Just to be clear you taking about a white screen with I think in dark blue or black text ENCRYPTION UNSUCCESSFUL and something like "reset phone" option directly under it, on the upper half of the screen?
Hi ezzony
Yes you are thinking of the right decryption unsuccessful page. I get it when booting to system
after installing Oreo and magisk 19 and having wiped everything (format data too). I will get the exact wording of it tonight
Thanks!
downgrade twrp i has same prob twrp 3.3.1 gives issues
ghet2rockuu said:
downgrade twrp i has same prob twrp 3.3.1 gives issues
Click to expand...
Click to collapse
Hi ghet2rockuu
I downgraded twrp and that got it working Thank You! see also Phoenix591 thread [Recovery][Unofficial for the moment]TWRP 3.3.1-0 : 2019-05-17 #625
Thank You !
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Same thing happening to me, no matter what I do, stock recovery keeps overwriting TWRP
Oh dear, that doesn't sound good.
I hope there will be a solution to the problem soon.
I don't want to do without TWRP and root.
I wanted to try it according to these instructions "https://miui.blog/redmi-k20/twrp-mi-9t-redmi-k20-vbmeta-mauronofrio/". But don't trust me, I'm afraid that it won't work and I can start all over again.
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
The fact that twrp is lost when flashing official rom (even thought twrp itself) is normal. You just have to reboot into bootloader and flash twrp again and it will be back.
Your problem here is that you are using an old and unofficial twrp build, that has problems on newer roms. Flash official twrp and you'll be fine
houbaba said:
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
Click to expand...
Click to collapse
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
hounter17 said:
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
Click to expand...
Click to collapse
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Oh sorry it works? I read somewhere that the original causes also bootloops :good:
Found something on a Russian website.
Обновление TWRP Recovery от LR.Team для устройств на Android 10
Does anyone dare to test this?
Here is the link to the TWRP for our Mi9t
> TWRP-3.3.1-1109-DX (полный комплект для установки) <
Check it out...
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
frank808 said:
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
Click to expand...
Click to collapse
Where did you get the twrp file from?
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Ok, I am on global 11.0.4.0 (QFJMIXM) and I used this latest twrp-3.3.1-0-davinci.img and I can confirm its working without bootloop.
ShiningScias said:
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
Click to expand...
Click to collapse
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
zgfg said:
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
Click to expand...
Click to collapse
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
A custom Recovery doesn't change Widevine level.
And TWRP is useful in case of bootloop (because of an installed Magisk module, by example) or if you want to easily reinstall Magisk after ROM update.
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Micdu70 said:
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
Click to expand...
Click to collapse
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
zgfg said:
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Yes, it should work.
But I prefer OrangeFox Recovery.
zgfg said:
so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Micdu70 said:
Yes, it should work.
But I prefer OrangeFox Recovery.
Click to expand...
Click to collapse
Something is fishy. IMO, if that official TWRP is really ok for 11.0.4.0, then it should correctly boot by:
fastboot boot twrp-3.3.1-0-davinci.img
But phone rebooted into the dark.
TG, I didn't really flash with, so by long pressing Pow it rebooted to system.
Tried again, no avail
Edit:
Tried the same fastboot boot with
twrp-3.3.1-12-davinci-mauronofrio.img and also OrangeFox-R10.1_1-Stable-davinci.img (obtained by unzipping OrangeFox), but it also reboots to dark and I have to long press Pow to reboot to system
frank808 said:
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Click to expand...
Click to collapse
You can install twrp by All In One tool
You can find its thread here itself
I took the official TWRP. " Link "
Flashed in fastboat and then booted the phone with a key combination in TWRP.
With the Fastboot command it didn't work for me either, the cell phone remained black ...