I decided today to try and root my phone and followed the steps on this tutorial: http://forum.xda-developers.com/nexus-4/general/nexus-4-guide-unlock-bootloader-root-t2266654
I had unlocked my phone and installed the latest version of TWRP. Now I can only boot into TWRP and bootloader. My phone is not being picked up by my PC. I tried a factory reset and format of data on TWRP but my phone still only boots into TWRP.
Is my phone permanently bricked?
Any help will be greatly appreciated
I actually have just made some progress now. I've managed to get the phone connected to the computer by going into ADB sideload and installing the ADB drivers again on my computer.
Typing ADB devices in CMD now shows my device as connected.
Any advice on what I should do now?
What happens when you try to boot it normally? Is it stuck at the boot animation or does it go directly to the bootloader or recovery? Since you already had to wipe everything you could try flashing a factory image via fastboot.
theminikiller said:
What happens when you try to boot it normally? Is it stuck at the boot animation or does it go directly to the bootloader or recovery? Since you already had to wipe everything you could try flashing a factory image via fastboot.
Click to expand...
Click to collapse
Booting the phone normally loads it into TWRP. Booting the phone with the volume key pressed down loads the bootloader. I think I may have just wiped the OS present on the Phone.
I want my phone to be rooted running CyanogenMOD (phone is currently unrooted). Should I first install a stock rom then root by installing SuperSU and CyanogenMOD or can I just skip installing a stock rom and install SuperSU and CyanogenMOD?
Thanks for the help
You could try flashing a cyanogenmod zip from TWRP, and if that doesn't work I would suggest flashing I factory image.
theminikiller said:
You could try flashing a cyanogenmod zip from TWRP, and if that doesn't work I would suggest flashing I factory image.
Click to expand...
Click to collapse
But my phone is not rooted yet. Can I install SuperSU by copying onto my phone and installing it through TWRP?
umair_ said:
But my phone is not rooted yet. Can I install SuperSU by copying onto my phone and installing it through TWRP?
Click to expand...
Click to collapse
Yes, if it is a zip file. But I'm pretty sure installing cyanogenmod will automatically root it for you.
theminikiller said:
Yes, if it is a zip file. But I'm pretty sure installing cyanogenmod will automatically root it for you.
Click to expand...
Click to collapse
I installed SuperSU then CyanogenMOD and lastly GApps. It still only boots into TWRP and it doesn't look like there has been any files added to the phone's storage. Should I first flash a stock rom and then try to install CyanogenMOD?
umair_ said:
I installed SuperSU then CyanogenMOD and lastly GApps. It still only boots into TWRP and it doesn't look like there has been any files added to the phone's storage. Should I first flash a stock rom and then try to install CyanogenMOD?
Click to expand...
Click to collapse
Yes, try flashing a factory image. If it boots then you could try flashing cyanogenmod.
EDIT: here is a guide on how to flash a factory image: http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312
theminikiller said:
Yes, try flashing a factory image. If it boots then you could try flashing cyanogenmod.
EDIT: here is a guide on how to flash a factory image: http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312
Click to expand...
Click to collapse
I've managed to get it all working by first flashing the stock ROM and starting all over again.
Thanks for your help.
Is there a workaround to this other than flashing factory images...?
hwweiler said:
Is there a workaround to this other than flashing factory images...?
Click to expand...
Click to collapse
@hwweiler, No friend there is no other way.Please before do this as is one direction way take the pain to look on my post #180 on zaclmon's thread http://forum.xda-developers.com/nexus-4/orig-development/wip-aosp-7-0-nougat-t3448444/page18 and keep in mind that is impossible to return back on any nandroid backup u kept e.g to 5.1.1 or M furthermore its also impossible to flash any rom zip if u use this N (WIP) rom,the only way to have a workable phone again is to flash the stock rom from scratch.Exceperienced with and never again untill we have the appropriate solution..The twrp used and i still use on M is TWRP 3.0.2.0.The possibility to return on LP ffrom M and reverse still exists but not when u flash this rom.
Regards,Christos
Hi!
I have a A2107G and unlocked it, coming from B04.
Everything worked so far, but I have messed around with bootstack/modem and now I am struggling.
I flashed a new ROM with TWRP (different versions) and the ROM (doesn't matter which one) is stuck in booting animation.
What can I do to bring it back to life?
Also another question: After switching on, directly after the ZTE logo coming up, a black sceen with some infos coming up and stay there for 5 secs.
Is there a way to get rid of this
Sui77 said:
Hi!
I have a A2107G and unlocked it, coming from B04.
Everything worked so far, but I have messed around with bootstack/modem and now I am struggling.
I flashed a new ROM with TWRP (different versions) and the ROM (doesn't matter which one) is stuck in booting animation.
What can I do to bring it back to life?
Also another question: After switching on, directly after the ZTE logo coming up, a black sceen with some infos coming up and stay there for 5 secs.
Is there a way to get rid of this
Click to expand...
Click to collapse
Do you have twrp? If yes, flash stock rom.
WesTD said:
Do you have twrp? If yes, flash stock rom.
Click to expand...
Click to collapse
Yes, I have TWRP.
So i should flash a stock image and start over from scratch (with rooting, ...)
Is the posted screen normal?
Sui77 said:
Yes, I have TWRP.
So i should flash a stock image and start over from scratch (with rooting, ...)
Is the posted screen normal?
Click to expand...
Click to collapse
Yes it is normal. It means you've unlocked bootloader.
Flash stock rom zip. There are some guides.
WesTD said:
Yes it is normal. It means you've unlocked bootloader.
Flash stock rom zip. There are some guides.
Click to expand...
Click to collapse
THX.
Will do so.
Which ROM do you prefer? CarbonRom? LOS?
How do i get the system partition r/w?
I think I screwed up the phone when i tried to make it writable?
Sui77 said:
THX.
Will do so.
Which ROM do you prefer? CarbonRom? LOS?
How do i get the system partition r/w?
I think I screwed up the phone when i tried to make it writable?
Click to expand...
Click to collapse
I use aosp bases.
Sui77 said:
THX.
Will do so.
Which ROM do you prefer? CarbonRom? LOS?
How do i get the system partition r/w?
I think I screwed up the phone when i tried to make it writable?
Click to expand...
Click to collapse
Heh. I don't know if there are flashable stock zips for the A2017G, the way I know of is flashing the stock recovery and using an official zip. But you shouldn't go back to stock if you want to use custom ROMs. Try this:
-Get an SD card, put
~ a custom ROM (RR, LOS,NucleaROM (i prefer NucleaROM, just sayin)),
~a Magisk 13.3 zip or SuperSU 2.82 zip,
~an OpenGApps zip (I use pico), arm64,
~a TWRP 3.1.1-0.img and
~A2017X Universal Bootloader and A2017G modem.
-Wipe system, data, cache and dalvik
-Install the Universal Bootloader, then the Modem, then the ROM and last the GApps and magisk/SuperSU
-If you had something important on the internal storage put it on the SD with the File manager under Advanced
-Go to Wipe -> Format data -> type Yes. This will get rid of the possible encryption from the stock ROM, but it will wipe your internal storage too.
-Reboot to system
You can use the 5 seconds screen to get to TWRP with the Volume buttons. Pretty handy I guess. There's a zip out there that gets rid of that screen, but you risk black-screening your phone with what seems to be no immediate fix (you'd be looking at an RMA)
So, after you use the phone and open TWRP again, you'll have an old version of it (3.0.1N-0 or sth). So go to Install, choose Install image, and select the TWRP 3.1.1-0.img on your SDcard. Then Reboot -> reboot to recovery and you can do whatever you want.
Choose an username... said:
Heh. I don't know if there are flashable stock zips for the A2017G, the way I know of is flashing the stock recovery and using an official zip. But you shouldn't go back to stock if you want to use custom ROMs. Try this:
-Get an SD card, put
~ a custom ROM (RR, LOS,NucleaROM (i prefer NucleaROM, just sayin)),
~a Magisk 13.3 zip or SuperSU 2.82 zip,
~an OpenGApps zip (I use pico), arm64,
~a TWRP 3.1.1-0.img and
~A2017X Universal Bootloader and A2017G modem.
-Wipe system, data, cache and dalvik
-Install the Universal Bootloader, then the Modem, then the ROM and last the GApps and magisk/SuperSU
-If you had something important on the internal storage put it on the SD with the File manager under Advanced
-Go to Wipe -> Format data -> type Yes. This will get rid of the possible encryption from the stock ROM, but it will wipe your internal storage too.
-Reboot to system
You can use the 5 seconds screen to get to TWRP with the Volume buttons. Pretty handy I guess. There's a zip out there that gets rid of that screen, but you risk black-screening your phone with what seems to be no immediate fix (you'd be looking at an RMA)
So, after you use the phone and open TWRP again, you'll have an old version of it (3.0.1N-0 or sth). So go to Install, choose Install image, and select the TWRP 3.1.1-0.img on your SDcard. Then Reboot -> reboot to recovery and you can do whatever you want.
Click to expand...
Click to collapse
Hi!
Thanks for your help and the time you spent on my problem.
I have tried all that stuff already, but maybe not in exact that order. Will try it this evening.
In case i will be able to bring it back to life, I have 2 questions, pls:
1: You mentioned the 5sec-screen and a zip to get rid of it.
Where could I find it (not seen yet) and how do i get into fastboot, when I skip this screen?
2: When I setted up my Axon with a Custom Rom and SU and everything was working as it should do, I was not able to write to /system (or deleting something in system/apps)
How do I get rid of this restriction? I think I have found an instruction once, but I failed and afterwards my device was stuck in animation.
orry for bothering, but the Axon really drive me nuts. Never had such a hassle with my Nexus
Sui77 said:
Hi!
Thanks for your help and the time you spent on my problem.
I have tried all that stuff already, but maybe not in exact that order. Will try it this evening.
In case i will be able to bring it back to life, I have 2 questions, pls:
1: You mentioned the 5sec-screen and a zip to get rid of it.
Where could I find it (not seen yet) and how do i get into fastboot, when I skip this screen?
2: When I setted up my Axon with a Custom Rom and SU and everything was working as it should do, I was not able to write to /system (or deleting something in system/apps)
How do I get rid of this restriction? I think I have found an instruction once, but I failed and afterwards my device was stuck in animation.
orry for bothering, but the Axon really drive me nuts. Never had such a hassle with my Nexus
Click to expand...
Click to collapse
Which file manager you are using?
I'm using Root Explorer and no problem. Be sure you allow to root permission
WesTD said:
Which file manager you are using?
I'm using Root Explorer and no problem. Be sure you allow to root permission
Click to expand...
Click to collapse
Also Root Explorer, root granted.
Sui77 said:
Also Root Explorer, root granted.
Click to expand...
Click to collapse
Can you just leave the 5 sec screen alone? You can kill your phone, and there doesn't seem to be anything you can do really.
If you're insistent, you can find it under Themes Apps and Mods, called "We remove the inscription that the bootloader is unlocked" made by NFound1.
And about the restriction to modify the system, connect your phone to a PC with ADB, fire up ADB and configure it (USB debugging, ADB over network if you have the option, permit the connection) and issue 'adb reboot disemmcwp' (disable emmc write protection, that is. Write it just like that or your phone will reboot and you will still have the protection active).
The phone has its difficulties and all but it's easy to work with once you get the hang of it. And, you know, your big cores don't just die all of a sudden, which is a good thing!
Choose an username... said:
Heh. I don't know if there are flashable stock zips for the A2017G, the way I know of is flashing the stock recovery and using an official zip. But you shouldn't go back to stock if you want to use custom ROMs. Try this:
-Get an SD card, put
~ a custom ROM (RR, LOS,NucleaROM (i prefer NucleaROM, just sayin)),
~a Magisk 13.3 zip or SuperSU 2.82 zip,
~an OpenGApps zip (I use pico), arm64,
~a TWRP 3.1.1-0.img and
~A2017X Universal Bootloader and A2017G modem.
-Wipe system, data, cache and dalvik
-Install the Universal Bootloader, then the Modem, then the ROM and last the GApps and magisk/SuperSU
-If you had something important on the internal storage put it on the SD with the File manager under Advanced
-Go to Wipe -> Format data -> type Yes. This will get rid of the possible encryption from the stock ROM, but it will wipe your internal storage too.
-Reboot to system
You can use the 5 seconds screen to get to TWRP with the Volume buttons. Pretty handy I guess. There's a zip out there that gets rid of that screen, but you risk black-screening your phone with what seems to be no immediate fix (you'd be looking at an RMA)
So, after you use the phone and open TWRP again, you'll have an old version of it (3.0.1N-0 or sth). So go to Install, choose Install image, and select the TWRP 3.1.1-0.img on your SDcard. Then Reboot -> reboot to recovery and you can do whatever you want.
Click to expand...
Click to collapse
Tried exactly the steps you descriped, but no luck ---- still stuck in animation
Will try it tomorrow with Magist.
How can I go back to total stock.
Tried anything I found on xda, but no luck.
When I flash the ZTE B05 zip, I don't even get the boot animation.
Sui77 said:
Tried exactly the steps you descriped, but no luck ---- still stuck in animation
Will try it tomorrow with Magist.
How can I go back to total stock.
Tried anything I found on xda, but no luck.
When I flash the ZTE B05 zip, I don't even get the boot animation.
Click to expand...
Click to collapse
How do you flash the B05 zip? Did you try to flash the official zip?? lol
Follow my guide on the Guides section ("back to stock safely" or sth), it works...
Choose an username... said:
How do you flash the B05 zip? Did you try to flash the official zip?? lol
Follow my guide on the Guides section ("back to stock safely" or sth), it works...
Click to expand...
Click to collapse
I tired to flash a B5 an B5 bootstack with TWRP 3.1.1 -> not able to boot
Then i flashed, according to your guide, the stock recovery and now the device seems to be really bricked.
After the ZTE logo a lying robot appears for half a second and after that, the device is dead.
Can't boot into TWRP, can't use adb, EDL, ...
Ok, managed to get back TWRP.
But I really don't know how so solve my issue of how to come back to stock :crying:
Flashed a B05 stock (zip) and B05 bootstack and Magist....stuck in boot animation (AXON picture collage).
Fu....
Update:
Managed to flash this files:
ZTE_A2017GV1.0.0B09_BootStack_by_tron1.zip
ZTE_A2017GV1.0.0B09_StockSystem_by_tron1.zip
TWRP 3.1.1.0
Phone is up and running with A2017GV1.0.0B09
How can I upgrade to the B05 bootstack and the B05 ROM
Sui77 said:
Update:
Managed to flash this files:
ZTE_A2017GV1.0.0B09_BootStack_by_tron1.zip
ZTE_A2017GV1.0.0B09_StockSystem_by_tron1.zip
TWRP 3.1.1.0
Phone is up and running with A2017GV1.0.0B09
How can I upgrade to the B05 bootstack and the B05 ROM
Click to expand...
Click to collapse
to go back to stock, download the full zip of any version you want, and download stock recvovery from b08, you have flashed it.
from twrp, format data, and try to boot, if you cannot, reflash b09 recovery from twrp, select image and the recovery you download, then go to stock recovery and update from sdcard. it allways work for me, if you stuck in boot animation again, reboot recovery and wipe data.
after you succesfully boot, reboot edl, and reflash twrp, the version you were using before witn axon7tool, thats all
Sui77 said:
Update:
Managed to flash this files:
ZTE_A2017GV1.0.0B09_BootStack_by_tron1.zip
ZTE_A2017GV1.0.0B09_StockSystem_by_tron1.zip
TWRP 3.1.1.0
Phone is up and running with A2017GV1.0.0B09
How can I upgrade to the B05 bootstack and the B05 ROM
Click to expand...
Click to collapse
Just follow my guide for that. If you flash the B04 recovery (the one i provided) you shouldn't have any trouble
Managed to flash the B05 and phone is up and running.
Made a backup by using TWRP 3.1.1.0 and flashed CarbonRom, which also worked nicely.
However, I'm not able to flash LOS by using the B05 bootstack.
I'm too dumb for this phone
Sui77 said:
Managed to flash the B05 and phone is up and running.
Made a backup by using TWRP 3.1.1.0 and flashed CarbonRom, which also worked nicely.
However, I'm not able to flash LOS by using the B05 bootstack.
I'm too dumb for this phone
Click to expand...
Click to collapse
What B05 bootstack? You have to use the universal bootstack and the A2017G modem file...
Both are on the LOS thread. It seems weird that carbonROM would even boot without the universal bootstack though
Hi, I have a essential phone running Oreo 8.1, just recently I have rooted the phone with magisk v16 an twrp 3.2.1, I successfully flashed it with twrp but after the flash whenever I want to get into twrp it just freezes up on the mount data screen and I have to force reboot it, does anyone know a solution to this problem
Make sure you're following the exact steps from this post. Every step is crucial (except #3, because you have to disable your screen lock before booting twrp.
You shouldn't have to manually mount anything in TWRP either. The magisk installer might give you an error about mounting system but it doesn't seem to make any difference.
[QRCODE][/QRCODE]
yellk20 said:
Hi, I have a essential phone running Oreo 8.1, just recently I have rooted the phone with magisk v16 an twrp 3.2.1, I successfully flashed it with twrp but after the flash whenever I want to get into twrp it just freezes up on the mount data screen and I have to force reboot it, does anyone know a solution to this problem
Click to expand...
Click to collapse
You cannot have TWRP installed with 8.x.
TWRP is not compatible.
You must flash the original boot image, then install magisk.
TWRP cannot remain.
You will boot loop.
Please read the instructions on rooting carefully.
Ok thank you
Why can't TWRP replace recovery instead of boot?
RawSlugs said:
Why can't TWRP replace recovery instead of boot?
Click to expand...
Click to collapse
No one has created a bit image with TWRP as the recovery.
Sent from my PH-1 using XDA Labs
RawSlugs said:
Why can't TWRP replace recovery instead of boot?
Click to expand...
Click to collapse
Because the partition layout of the Essential does not have a recovery partition.
Recovery is contained in the boot image.
So to have TWRP resident/permanent, the boot image must be patched.
It has been done for 7.x, but sense 8.x is still beta, there is no official TWRP for Oreo.
Once Oreo is final, I expect we will get a TWRP that works.
The current limitation, means you can't flash without a computer handy.
I am stuck at encryption failed when I flash stock oreo rom. I tried formatting data using twrp and flashed no encryption file as well but nothing works.:crying::crying::crying:
I just want to use the stock oreo rom again with root.
Pls help:crying:
Which ROM did you try and flash / install?
Try upgrading your TWRP to the latest version too.
jl10101 said:
Which ROM did you try and flash / install?
Try upgrading your TWRP to the latest version too.
Click to expand...
Click to collapse
I used partition dl mode to flash the stock oreo rom over 7.0 to keep the root. Then i flashed custom kernal for stock 8.0 but it didnt work. I have done the same procedure before and it has worked like a charm. But it keeps on giving the encrytion error when i try it now
Deadmeat03 said:
I used partition dl mode to flash the stock oreo rom over 7.0 to keep the root. Then i flashed custom kernal for stock 8.0 but it didnt work. I have done the same procedure before and it has worked like a charm. But it keeps on giving the encrytion error when i try it now
Click to expand...
Click to collapse
Odd. If I had to guess anything, it would be that not all the partitions were flashed when going from Nougat to Oreo.
I once flash a Nougat ROM from an Oreo ROM and I had the same encryption issue and lost everything.
That was the last time I would trust myself again and not do a backup.
Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track...
Prowler_gr said:
Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track...
Click to expand...
Click to collapse
I tried that as well. With stock recovery is says data is corrupted and doesn't do anything. I think it might be a problem with patched lg up because when i use normal lg up to flash oreo it works. But I cant root then.
I would try changing to 3.2.3-4 TWRP and then trying the procedure again. It seems that the 3.3.0 TWRP does not decrypt properly sometimes.
In the same boat as OP
scottyrick said:
I would try changing to 3.2.3-4 TWRP and then trying the procedure again. It seems that the 3.3.0 TWRP does not decrypt properly sometimes.
Click to expand...
Click to collapse
Hi
Looking for a way to keep TWRP and root ... any help appreciated
I've got a US996 with the same issue as the op. I have the latest TWRP 3.3.1-0. The phone was working fine until I upgraded twrp but I might have done a mistake resetting phone outside of twrp.
I can still get back into twrp but I haven't been able to install zip files without getting that decryption unsuccessful message when booting to system.
When getting back into TWRP using hardware buttons sometimes there is a prompt asking "keep system read only?" which I never chose and swipe to allow modification. I think this happens after
I pull the battery after getting the decryption unsuccessful message. There is a reset system that I could chose under the decryption unsuccessful message but I'm assuming that will make me lose twrp
...but if my phone is a us996 and is still
unlocked, would it matter if I did select it? Wouldn't I be able to reinstall twrp using adb again on a computer after Oreo is reinstalled?
To do Prowler_gr's suggestion which guide do I follow (sounds like I should do the second option)
"Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track... "
1-[GUIDE][UNBRICK] Patch LGUP to unlock features & unbrick V20 (Variant mismatch fix) to use lgup
or this guide
2-Ultimate guide to unbrick LG V20(Only Variants with .KDZ)[No OS Firmware Update Loop]
Thank you for any guidance on this...
There is a reset system that I could chose under the decryption unsuccessful message but I'm assuming that will make me lose twrp
Click to expand...
Click to collapse
Don't blame me if this goes wrong but I'm pretty much 100% certain that you mush press the rest button. This has happened to me a few times I'm sure. You won't loose twrp. Whatever resetting goes on in the background I don't think it's an actual Factory Reset.
Edit: Just to be clear you taking about a white screen with I think in dark blue or black text ENCRYPTION UNSUCCESSFUL and something like "reset phone" option directly under it, on the upper half of the screen?
Hi ezzony
Yes you are thinking of the right decryption unsuccessful page. I get it when booting to system
after installing Oreo and magisk 19 and having wiped everything (format data too). I will get the exact wording of it tonight
Thanks!
downgrade twrp i has same prob twrp 3.3.1 gives issues
ghet2rockuu said:
downgrade twrp i has same prob twrp 3.3.1 gives issues
Click to expand...
Click to collapse
Hi ghet2rockuu
I downgraded twrp and that got it working Thank You! see also Phoenix591 thread [Recovery][Unofficial for the moment]TWRP 3.3.1-0 : 2019-05-17 #625
Thank You !
So after a long battle with flashing magisk that resulted in a bootloop everytime I was only able to boot again after flashing the magiskuninstaller. I decided to flash magisk again, flash dmverityencryption disabler and format data as some users suggested.
Now i'm stuck in a full on bootlop.
I decided to wipe everything and just flash the latest miui11 (11.0.4.0) cause that fixed my problems last time. But this time i'm still stuck in a bootloop after flashing the rom. I also noticed that the persist partition is missing for some reason, not sure if it's supposed to be like this. Luckily the phone still boots to orangefox recovery so hopefully I can fix this.
Any advice guys?
beybus said:
So after a long battle with flashing magisk that resulted in a bootloop everytime I was only able to boot again after flashing the magiskuninstaller. I decided to flash magisk again, flash dmverityencryption disabler and format data as some users suggested.
Now i'm stuck in a full on bootlop.
I decided to wipe everything and just flash the latest miui11 (11.0.4.0) cause that fixed my problems last time. But this time i'm still stuck in a bootloop after flashing the rom. I also noticed that the persist partition is missing for some reason, not sure if it's supposed to be like this. Luckily the phone still boots to orangefox recovery so hopefully I can fix this.
Any advice guys?
Click to expand...
Click to collapse
U flash the 11.0.4.0 fastboot rom or over twrp?
joke19 said:
U flash the 11.0.4.0 fastboot rom or over twrp?
Click to expand...
Click to collapse
Thanks for the answer. So far I only tried flashing over twrp, should I download the fastboot version and try with miflash?
Yes but look that u don't lock ur bootloader
joke19 said:
Yes but look that u don't lock ur bootloader
Click to expand...
Click to collapse
Okay, after using the miflash tool the phone boots up again. Now i'll fastboot the orangefox recovery. How do I got about flashing magisk after that so I avoid bootloop again?
beybus said:
Okay, after using the miflash tool the phone boots up again. Now i'll fastboot the orangefox recovery. How do I got about flashing magisk after that so I avoid bootloop again?
Click to expand...
Click to collapse
Backup and test. Normally no problem, only by updates with old modules