Related
Hello everyone,
i just flashed the newest Pure Nexus Rom and everything went fine.
I forgot to flash the SuperSU Zip so i tried to got back into TWRP, but now it stuck.
The System boots normally, only TWRP wont boot.
Anyone had that problem too?
if anyone else has the same issue, here is the answer:
I forgot to erase the userdata or cache.
If you have the same problem use fastboot!
fastboot format cache
fastboot format userdata
Then it should work again.
(Everything on your own risk)
If you dont flah SuperSU asap, TWRP will not stick on reboot (w nougat). That was the issue.
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
Exactly. It happened before you flashed SuperSU zip. Not flashing SuperSU caused your problem. It needs to be flashed the first time you go into TWRP or you won't be able to boot back into TWRP. The previous poster is correct.
Maybe we talk about different problems
Ive formatted cache and userdata yesterday,
now i can go back into twrp.
(SuperSU is not flashed now).
Just tried it, works perfectly!
kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
I never, ever flash userdata, and never had an issue.
We can agree to disagree. Either the other poster and I arent understanding your question, or you arent understanding our reply. It's cool, it happens.
But TWRP not sticking is due to not running SuperSU at the end of the install process. It wont stick.
And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing
kaufikauf said:
And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing
Click to expand...
Click to collapse
You should take a look at this post in the official TWRP thread for a clearer reason why.
SlimSnoopOS said:
You should take a look at this post in the official TWRP thread for a clearer reason why.
Click to expand...
Click to collapse
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?
USFguy said:
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?
Click to expand...
Click to collapse
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....
USFguy said:
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....
Click to expand...
Click to collapse
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Tried that, ended up going down an update in TWRP and it worked, weird....
I had a similar issue and I had to go back in and reflash Recovery image to recovery partition and all was well
ONEPLUS 5
6GB RAM
7.1.1
4.5.14 OOS
HELLO
Today i flashed TWRP to my device by fastboot method
Everything went well
I started TWRP and make a backup
But a few minutes ago i tried to enter the recovery mode (TWRP) again but it send me back to the stock OP recovery!
Strange ..
How can i solve the problem,, not first time to happen with me
Thanks
Abdulaziz6p said:
ONEPLUS 5
6GB RAM
7.1.1
4.5.14 OOS
HELLO
Today i flashed TWRP to my device by fastboot method
Everything went well
I started TWRP and make a backup
But a few minutes ago i tried to enter the recovery mode (TWRP) again but it send me back to the stock OP recovery!
Strange ..
How can i solve the problem,, not first time to happen with me
Thanks
Click to expand...
Click to collapse
You have to flash TWRP, enter TWRP and then reboot directly to Recovery. That way, TWRP will modify the system so it will not replace TWRP with stock recovery.
Flash TWRP;
Boot directly into TWRP;
Flash Magisk with TWRP.
Magisk should prevent the stock recovery from replacing TWRP.
elbuenzurdo said:
You have to flash TWRP, enter TWRP and then reboot directly to Recovery. That way, TWRP will modify the system so it will not replace TWRP with stock recovery.
Click to expand...
Click to collapse
I made the same
Flashed twrp then right away swipe to allow modification even i made backup.
Abdulaziz6p said:
I made the same
Flashed twrp then right away swipe to allow modification even i made backup.
Click to expand...
Click to collapse
you need to flash supersu or magisk right after flashing OOS to prevent OOS from overwriting the recovery with stock one, as mentioned above..
Hi,
I was updating my OP6T to the new version (Magisk + Xxx NoLimits), but after the reboot post-update the device started to reboot to recovery after it booted. So I've tried to delete Magisk but the problem was still present, so I've decided to download the latest Oxygen ROM from the OnePlus and flash it from TWRP, but after flashing, the device started to always boot to recovery (before the OnePlus boot animation).
At least i tried to restore a nandroid backup of 1 month ago (System, Boot and Data), but still the device after the restore still boot to recovery before the boot animation.
I've only tried the system reboot (I've not tried to force boot another slot).
Do you have a solution to try before formatting the internal storage?
Thanks
Edit: After unistalling magisk and reflashing it again, now the device boots again, but immediately after (when the lock screen appear) the device reboot automatically to recovery again
Try this:
- in twrp , dirty flash the rom you are using (Oxygen os)
- factory reset
- flash twrp (the latest the better)
- flash Magisk 19.1
Reboot to system.
If this not working, Format data will work.
null0seven said:
Try this:
- in twrp , dirty flash the rom you are using (Oxygen os)
- factory reset
- flash twrp (the latest the better)
- flash Magisk 19.1
Reboot to system.
If this not working, Format data will work.
Click to expand...
Click to collapse
Factory reset from TWRP?
yes
null0seven said:
yes
Click to expand...
Click to collapse
So, do you mean the classic Wipe data, cache and dalvik?
https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-9-0-4-ota-oneplus-6t-t3860953
TWRP Users
1. Boot into TWRP and Flash the Latest Magisk Uninstaller
2. Flash the latest Full Oxygen OS Zip
3. Flash the TWRP installer Zip
4. Reboot to RECOVERY to make sure TWRP stays and continue to root.
5. Flash the Latest Magisk to maintain root
6. Reboot System and Enjoy the latest firmware without any data loss
Click to expand...
Click to collapse
I am guessing you skipped the first step...
Try this:
Flash the OTA zip
Reboot (you will be unrooted and with stock recovery)
Boot to TWRP through ADB
Flash magisk unistaller
Reboot
Boot to TWRP through ADB
Flash OTA zip
Flash TWRP
Reboot to TWRP
Flash magisk
Galeanatur said:
https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-9-0-4-ota-oneplus-6t-t3860953
I am guessing you skipped the first step...
Try this:
Flash the OTA zip
Reboot (you will be unrooted and with stock recovery)
Boot to TWRP through ADB
Flash magisk unistaller
Reboot
Boot to TWRP through ADB
Flash OTA zip
Flash TWRP
Reboot to TWRP
Flash magisk
Click to expand...
Click to collapse
I don't have the OTA but the full rom, isn't simplier to update with the full ROM?
I think I'm going to try the null0seven's solution
null0seven said:
Try this:
- in twrp , dirty flash the rom you are using (Oxygen os)
- factory reset
- flash twrp (the latest the better)
- flash Magisk 19.1
Reboot to system.
If this not working, Format data will work.
Click to expand...
Click to collapse
Ok, I've done this and actually is even worse, the device started to boot in recovery again and TWRP doesn't recognize that the internal storage is crypted, so i can't even access the internal storage (it shows only strange folders), so, now I can't flash the nandroid backup anymore.
I also mean FULL rom .zip.
Format data in twrp or in Fastboot. Or use MSM tool .
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
all of them will wipe ALL in youre phone, but it will work.
null0seven said:
I also mean FULL rom .zip.
Format data in twrp or in Fastboot. Or use MSM tool .
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
all of them will wipe ALL in youre phone, but it will work.
Click to expand...
Click to collapse
So I've to Full wipe and then adb sideload the ROM? Because at the current state I can't even boot the device, it always starts in TWRP
Edit: I've also tried the blue_spark's version but nothing changed, TWRP can't recognize the encrypted storage
you can try this first.
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
fuji97 said:
Hi,
I was updating my OP6T to the new version (Magisk + Xxx NoLimits), but after the reboot post-update the device started to reboot to recovery after it booted. So I've tried to delete Magisk but the problem was still present, so I've decided to download the latest Oxygen ROM from the OnePlus and flash it from TWRP, but after flashing, the device started to always boot to recovery (before the OnePlus boot animation).
At least i tried to restore a nandroid backup of 1 month ago (System, Boot and Data), but still the device after the restore still boot to recovery before the boot animation.
I've only tried the system reboot (I've not tried to force boot another slot).
Do you have a solution to try before formatting the internal storage?
Thanks
Edit: After unistalling magisk and reflashing it again, now the device boots again, but immediately after (when the lock screen appear) the device reboot automatically to recovery again
Click to expand...
Click to collapse
When you're saying you're flashing the full ROM after wiping, are you meaning the xxx no limit? If so this isn't an os rom it's just a magisk module rom that's an add on to oxygen os. You need to wipe and flash the latest oxygen os rom, stable or beta which ever you're using, then flash TWRP, flash your os again on the other slot, flash TWRP, flash magisk, if your system boots fine then flash the xxx no limits rom in twrp.
ebproject said:
When you're saying you're flashing the full ROM after wiping, are you meaning the xxx no limit? If so this isn't an os rom it's just a magisk module rom that's an add on to oxygen os. You need to wipe and flash the latest oxygen os rom, stable or beta which ever you're using, then flash TWRP, flash your os again on the other slot, flash TWRP, flash magisk, if your system boots fine then flash the xxx no limits rom in twrp.
Click to expand...
Click to collapse
No, I flashed the full ROM downloaded from the OnePlus server
Have you tried formatting data?
Cablespider said:
Format data.
Click to expand...
Click to collapse
So, full format data and flash rom + TWRP + Magisk?
fuji97 said:
No, I flashed the full ROM downloaded from the OnePlus server
Click to expand...
Click to collapse
You're best bet is to use the MSM tool
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Ok, I've decided to use MSM to recover the device, I've lost the internal storage, but at least the device is working again.
Thank you to everyone who helped me in this thread
fuji97 said:
Ok, I've decided to use MSM to recover the device, I've lost the internal storage, but at least the device is working again.
Thank you to everyone who helped me in this thread
Click to expand...
Click to collapse
Maybe it was a Magisk module that caused it. I removed pixel module from Magisk and it done the same to me.
Hey guys,
I just oem unlocked my new 6T and have access to the bootloader. As I try to install TWRP with
HTML:
fastboot boot imagename.img
my computer says that it pushes the image just fine, but my phone restarts and then never makes it past the fastboot splash screen instead of loading up TWRP.
I was following the fajita (6T) instructions from the lineage OS website.
The first time I did it it worked, but following the instructions on installing lineage and telling me to wipe and format data, both the recovery seems to be gone and i cannot fastboot boot into TWRP.
Can you help?
Seems the same with what i experienced. Have you tried installing a fastboot rom? I had my oneplus 6t bootlooped into fastboot mode even if i try to turn it off, it just boots back automatically to fastboot mode. Last resort was to flash a fastboot rom. That worked for me.
thalesian2020 said:
Hey guys,
I just oem unlocked my new 6T and have access to the bootloader. As I try to install TWRP with
HTML:
fastboot boot imagename.img
my computer says that it pushes the image just fine, but my phone restarts and then never makes it past the fastboot splash screen instead of loading up TWRP.
I was following the fajita (6T) instructions from the lineage OS website.
The first time I did it it worked, but following the instructions on installing lineage and telling me to wipe and format data, both the recovery seems to be gone and i cannot fastboot boot into TWRP.
Can you help?
Click to expand...
Click to collapse
What TWRP version are you trying to install?
jp0469 said:
What TWRP version are you trying to install?
Click to expand...
Click to collapse
I tried 3.3.1.1. and 3.2.3.0.
What you are describing, I'm going to assume you are trying to install Lineage 17. You can't install TWRP if you are going Android 10, at least that's the conclusion I've come to at this point in time. It will fail to boot or end up in crash dump mode every time you try and enter recovery if you are on a custom ROM. If you are on Android 9, it's not an issue. I believe it's OK stock as well, but I don't know haven't tried, haven't been stock in a long time.
For LOS 17, only boot the TWRP image, never boot to recovery, never run the TWRP installer. You will likely still have to format data.
I have a post here, from when I had a similar issue. (instructions)
You'll notice the OmniRom instructions don't mention installing TWRP, only booting it.
Once I was in your spot, I always went back to stock using the fastboot ROM, installed TWRP, updated (still using TWRP), then started over with my install.
Well no, i was actually trying to install Lineage 16, which is Android 9 I believe.
The problem for me is that I do not get to the point where TWRP opens after "fastboot boot"ing it. So I understand, I should use a fastboot stock ROM? Is there such a thing? Where would I find it? Or would it be an OnePlus Oxygen ROM that I can fastboot?
Quickest way to start over:
To get back straight your gonna need to access a Windows PC, and run the MSM tool. Make sure you install both OnePlus and Qualcomm drivers. ( Don't wait for Windows, just pre install the drivers) here are some links. Not my work. Please be sure to thank the developers for creating and hosting these tools ?
MSM Tool:
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
OnePlus Drivers:
https://androidfilehost.com/?fid=11410963190603879743
Qualcomm drivers:
https://androidfilehost.com/?fid=11410963190603879743
thalesian2020 said:
Well no, i was actually trying to install Lineage 16, which is Android 9 I believe.
The problem for me is that I do not get to the point where TWRP opens after "fastboot boot"ing it. So I understand, I should use a fastboot stock ROM? Is there such a thing? Where would I find it? Or would it be an OnePlus Oxygen ROM that I can fastboot?
Click to expand...
Click to collapse
Were you on Android 10 before (OOS)? That will do that. LOS 16 is Android 9 and should have no problems installing TWRP or booting to it.. For LOS 16 I'd go back to 9.0.17, then install LOS 6T.
I posted these LOS install instructions a long time ago for another user.
Remember the MSM Tool will relock your bootloader so if something goes wrong the MSM Tool is your only choice. That is why it is always the last thing I resort to.
Thread to get Fastboot stock Roms if you want to try that route first.
Hey guys,
thank you so much for all your help. I've managed to use mauronofrios workaround here on xda to put my phone in a 9.0.17 state again (no idea what i had originally), and this way i could fastboot the twrp image again. so that worked fine, but so far flashing lineage hasnt worked, for whatever reason it seems to boot into a lineageos kind of recovery only (which i didnt even know existed).
So i guess in terms of this thread the problem is solved. Thank you again!
thalesian2020 said:
Hey guys,
thank you so much for all your help. I've managed to use mauronofrios workaround here on xda to put my phone in a 9.0.17 state again (no idea what i had originally), and this way i could fastboot the twrp image again. so that worked fine, but so far flashing lineage hasnt worked, for whatever reason it seems to boot into a lineageos kind of recovery only (which i didnt even know existed).
So i guess in terms of this thread the problem is solved. Thank you again!
Click to expand...
Click to collapse
Did you see my Lineage install instructions above? LOS installs its on Recovery when you flash the ROM. When om Android 9, boot TWRP, flash the TWRP installer, reboot to Recovery, install LOS 16, flash the TWRP installer again (replaces the LOS recovery that was installed), reboot to Recovery, install gapps / magisk if desired, reboot.
Read my instructions post though, the first time install is different, as you need LOS on both slots. Updating is different as well, its much easier.
It should go smoothly.
OhioYJ said:
Did you see my Lineage install instructions above? LOS installs its on Recovery when you flash the ROM. When om Android 9, boot TWRP, flash the TWRP installer, reboot to Recovery, install LOS 16, flash the TWRP installer again (replaces the LOS recovery that was installed), reboot to Recovery, install gapps / magisk if desired, reboot.
Read my instructions post though, the first time install is different, as you need LOS on both slots. Updating is different as well, its much easier.
It should go smoothly.
Click to expand...
Click to collapse
Do I need to be on Android 9 Stock when I start that process? What I did was boot into TWRP, flash TWRP installer, reboot into recovery, then format and wipe ALL partitions (except USB), then reboot into recovery again and then flash LOS, flash TWRP, reboot into recovery, flash LOS, flash TWRP, reboot system. Still no luck...
thalesian2020 said:
Do I need to be on Android 9 Stock when I start that process? What I did was boot into TWRP, flash TWRP installer, reboot into recovery, then format and wipe ALL partitions (except USB), then reboot into recovery again and then flash LOS, flash TWRP, reboot into recovery, flash LOS, flash TWRP, reboot system. Still no luck...
Click to expand...
Click to collapse
Wiping, Dalvik / ART, System, and Vendor is generally a bad idea. You can do them in certain situations, this isn't one of those situations you should be wiping those though. Factory reset, means the slider on the main page of the wipe screen that says swipe to factory reset, format data is the button that says format data. Don't do anything extra. If you did, yeah I would go back to 9.0.17 using the fastboot rom again, that will put everything back on both slots.
like OhioYJ stated, don't use advanced wipe. re-run the msm tool. Then follow his instuctions. You shouldn't need to preform any manual data wiping. The process of flashing will do everything required. looks like you're almost there
Thanks guys. I will try it out and let you know.
Edit: So I finally managed to properly install LOS - OhioYJ, your instructions worked! I installed 9.0.17 and went from there without wiping any additional partitions.
One questions remains: in your instructions you mention that after installing LOS once, you can update LOS as normal and you mention doing it via the recovery with flashing TWRP or GAPPS later again. Is it possible to do the update via the normal update function of LOS as well? Or will that overwrite TWRP?
You guys are awesome. Thank you so much for your help!
I seem to be stuck on the fastboot screen as well. Being on a MAC, anytime i try to do something in fastboot it goes straight back to the fastboot screen. I Thought I was on Android 10.0 trying to install recovery for that lead to bootloop of fastboot, tried using the Pie recovery and same thing. I am open to suggestions.
Thanks.
OhioYJ said:
What you are describing, I'm going to assume you are trying to install Lineage 17. You can't install TWRP if you are going Android 10, at least that's the conclusion I've come to at this point in time. It will fail to boot or end up in crash dump mode every time you try and enter recovery if you are on a custom ROM. If you are on Android 9, it's not an issue. I believe it's OK stock as well, but I don't know haven't tried, haven't been stock in a long time.
For LOS 17, only boot the TWRP image, never boot to recovery, never run the TWRP installer. You will likely still have to format data.
I have a post here, from when I had a similar issue. (instructions)
You'll notice the OmniRom instructions don't mention installing TWRP, only booting it.
Once I was in your spot, I always went back to stock using the fastboot ROM, installed TWRP, updated (still using TWRP), then started over with my install.
Click to expand...
Click to collapse
Twrp is working fine with Android 10, using mauronofrio version and magisk 20.2
callumbr1 said:
Twrp is working fine with Android 10, using mauronofrio version and magisk 20.2
Click to expand...
Click to collapse
Yeah it starting to seem like it maybe isolated to Lineage. You cant install TWRP with LOS 17. Someone else mentioned in the Omni thread that it worked. This thread is about Lineage, but that should be clarified, or clearer.
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Same thing happening to me, no matter what I do, stock recovery keeps overwriting TWRP
Oh dear, that doesn't sound good.
I hope there will be a solution to the problem soon.
I don't want to do without TWRP and root.
I wanted to try it according to these instructions "https://miui.blog/redmi-k20/twrp-mi-9t-redmi-k20-vbmeta-mauronofrio/". But don't trust me, I'm afraid that it won't work and I can start all over again.
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
The fact that twrp is lost when flashing official rom (even thought twrp itself) is normal. You just have to reboot into bootloader and flash twrp again and it will be back.
Your problem here is that you are using an old and unofficial twrp build, that has problems on newer roms. Flash official twrp and you'll be fine
houbaba said:
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
Click to expand...
Click to collapse
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
hounter17 said:
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
Click to expand...
Click to collapse
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Oh sorry it works? I read somewhere that the original causes also bootloops :good:
Found something on a Russian website.
Обновление TWRP Recovery от LR.Team для устройств на Android 10
Does anyone dare to test this?
Here is the link to the TWRP for our Mi9t
> TWRP-3.3.1-1109-DX (полный комплект для установки) <
Check it out...
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
frank808 said:
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
Click to expand...
Click to collapse
Where did you get the twrp file from?
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Ok, I am on global 11.0.4.0 (QFJMIXM) and I used this latest twrp-3.3.1-0-davinci.img and I can confirm its working without bootloop.
ShiningScias said:
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
Click to expand...
Click to collapse
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
zgfg said:
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
Click to expand...
Click to collapse
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
A custom Recovery doesn't change Widevine level.
And TWRP is useful in case of bootloop (because of an installed Magisk module, by example) or if you want to easily reinstall Magisk after ROM update.
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Micdu70 said:
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
Click to expand...
Click to collapse
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
zgfg said:
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Yes, it should work.
But I prefer OrangeFox Recovery.
zgfg said:
so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Micdu70 said:
Yes, it should work.
But I prefer OrangeFox Recovery.
Click to expand...
Click to collapse
Something is fishy. IMO, if that official TWRP is really ok for 11.0.4.0, then it should correctly boot by:
fastboot boot twrp-3.3.1-0-davinci.img
But phone rebooted into the dark.
TG, I didn't really flash with, so by long pressing Pow it rebooted to system.
Tried again, no avail
Edit:
Tried the same fastboot boot with
twrp-3.3.1-12-davinci-mauronofrio.img and also OrangeFox-R10.1_1-Stable-davinci.img (obtained by unzipping OrangeFox), but it also reboots to dark and I have to long press Pow to reboot to system
frank808 said:
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Click to expand...
Click to collapse
You can install twrp by All In One tool
You can find its thread here itself
I took the official TWRP. " Link "
Flashed in fastboat and then booted the phone with a key combination in TWRP.
With the Fastboot command it didn't work for me either, the cell phone remained black ...