Ascend Mate7 Firmware(MT7-L09,V100R001C00B130,Nonspecific(Russian),Channel-Others,Android 4.4.2,EMUI 3.0,05012PVA)
-> consumer.huawei.com/kz/support/downloads/detail/index.htm?id=34301
Who has the 127 on it can save them. No advantages.
For open boat loader, the recovery_h60.img work with it.
You mean
a) Ascend Mate7 Firmware(MT7-L09,V100R001C00B127,CEE&Nordic European,Channel-Others,Android 4.4.2,EMUI 3.0,05012PGF)
or
b) MT7-L09 Firmware(V100R001C00B127,Norwegian,Channel-Others,Android 4.4.2,EMUI 3.0)
or
c) something unofficial like "b127.zip"
I think official 130 is better than unofficial 127 for some people.
Of course if you nordic european is better stay on official Nordic European 127, if you installed it
Volgot said:
You mean
a) Ascend Mate7 Firmware(MT7-L09,V100R001C00B127,CEE&Nordic European,Channel-Others,Android 4.4.2,EMUI 3.0,05012PGF)
or
b) MT7-L09 Firmware(V100R001C00B127,Norwegian,Channel-Others,Android 4.4.2,EMUI 3.0)
or
c) something unofficial like "b127.zip"
I think official 130 is better than unofficial 127 for some people.
Of course if you nordic european is better stay on official Nordic European 127, if you installed it
Click to expand...
Click to collapse
I assume it's an UNOFFICIAL firmware, or al least not still tested and not officially release trough OTA update...the kernel is still "dirty" like in B127.
Can someone advice the differences in performance between B127 and B130, please?
By the way, any suggestion on how to re-turn kernel into "official" one and remove the "dirty" info on it?
tuddu said:
I assume it's an UNOFFICIAL firmware
Click to expand...
Click to collapse
Since it on official huawei web page "consumer.huawei.com" it was officially published for consumers in Kazahstan
tuddu said:
or al least not still tested
Click to expand...
Click to collapse
Maybe consumers in Kazahstan are testers?
tuddu said:
and not officially release trough OTA update...
Click to expand...
Click to collapse
Maybe because you are not in Kazahstan..
tuddu said:
the kernel is still "dirty" like in B127.
Click to expand...
Click to collapse
The whole android "is still dirty", it's not ios
Be aware:
a. Before upgrade, please guarantee the version you use is Huawei official version, or else it may upgrade failed or cause unknown problem.
b. Don’t try to upgrade software of other country or customization, or else it may upgrade failed or cause unknown problem.
Volgot said:
Be aware:
a.Before upgrade, please guarantee the version you use is Huawei official version, or else it may upgrade failed or cause unknown problem.
b.Don’t try to upgrade software of other country or customization, or else it may upgrade failed or cause unknown problem.
Click to expand...
Click to collapse
I upgraded from B127 without any problem
Volgot said:
Be aware:
a.Before upgrade, please guarantee the version you use is Huawei official version, or else it may upgrade failed or cause unknown problem.
b.Don’t try to upgrade software of other country or customization, or else it may upgrade failed or cause unknown problem.
Click to expand...
Click to collapse
Upgraded my german b120, no Problem. Why should an other country be a problem?
Be sure you have stock recovery (and of course stock huawei rom (no kangvip)) and there should be no problems.
I tested b130 and i'm back on b120. Bluetooth is still buggy for me, my swr10 smartband is disconnected randomly from time to time. Very annoying.
desmoloch said:
Upgraded my german b120, no Problem. Why should an other country be a problem?
Be sure you have stock recovery (and of course stock huawei rom (no kangvip)) and there should be no problems.
I tested b130 and i'm back on b120. Bluetooth is still buggy for me, my swr10 smartband is disconnected randomly from time to time. Very annoying.
Click to expand...
Click to collapse
I never had problem with blutooth (I use it in my car for hands free only)
Btw, I have no problem to install any rom with cwm recovery via 3 buttons method.
What country you are from? Have you original stock image? I had big problem after bloody rom from China, with "custom fail" on any rom installed after that (even on 120)
Volgot said:
I never had problem with blutooth (I use it in my car for hands free only)
Btw, I have no problem to install any rom with cwm recovery via 3 buttons method.
What country you are from? Have you original stock image? I had big problem after bloody rom from China, with "custom fail" on any rom installed after that (even on 120)
Click to expand...
Click to collapse
From germany, stock recovery and 120 Rom. Ah Ok i thought problems could only be if cwm is installed.
I upgraded with the huawei APP (upgrade in dload folder in SD card). That worked fine.
My bluetooth is working too, but 24/7 connection is a Problem. My smartband is connected all the time and i activated the "vibrate when out of range" Option. Randomly about every two hours my smartband vibrates even its in range. My mate shows disconnected, connected, disconnected... and so on. Thats why i am back on b120
desmoloch said:
From germany, stock recovery and 120 Rom. Ah Ok i thought problems could only be if cwm is installed.
I upgraded with the huawei APP (upgrade in dload folder in SD card). That worked fine.
My bluetooth is working too, but 24/7 connection is a Problem. My smartband is connected all the time and i activated the "vibrate when out of range" Option. Randomly about every two hours my smartband vibrates even its in range. My mate shows disconnected, connected, disconnected... and so on. Thats why i am back on b120
Click to expand...
Click to collapse
Hi, i have a smartband Sony too, i have the same problem. With the b120 version worls ok but now with b130 disconnected all the time. How can i go back to version b120?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
I'm in France now with a french version of mt7-l09, and I'm looking for a full french stock factory image (not just a rom update)
Volgot said:
I'm in France now with a french version of mt7-l09, and I'm looking for a full french stock factory image (not just a rom update)
Click to expand...
Click to collapse
Hi,
Just flash this mega.co.nz/#!SJJzlaIa!y8rWY2XEStae6psg7NI_B_beW_BIZIf5tmov5Bc11rQ (B120SP04) which is a full factory image, flashable just as a local update, within the system or with the stock recovery, HM7 comes with this version in France), and you'll have the Western-European HM7.
Don't worry, HM7 in France are MT7-L09 too, and comes with the above ROM.
This image contains everything : CUST, KERNEL, BASEBAND, SYSTEM partition etc...
Welcome to France!
Inxs05 said:
Hi, i have a smartband Sony too, i have the same problem. With the b120 version worls ok but now with b130 disconnected all the time. How can i go back to version b120?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
Click to expand...
Click to collapse
Can anybody help me?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
I was on 127 with CWM recovery and root, flashed stock recovery and flashed local update 130 today. Everything is working fine, I flashed it because newer kernel in this version.
Inxs05 said:
Hi, i have a smartband Sony too, i have the same problem. With the b120 version worls ok but now with b130 disconnected all the time. How can i go back to version b120?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
Click to expand...
Click to collapse
Thank you!! Thats means i am not the only one
Back to b120 is the same as upgrade: place the b120 update.app in the folder dload on your SD card and update with huawai update APP (local update)
desmoloch said:
Thank you!! Thats means i am not the only one
Back to b120 is the same as upgrade: place the b120 update.app in the folder dload on your SD card and update with huawai update APP (local update)
Click to expand...
Click to collapse
Ok, then this is the only version that works with our smartband, no?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
---------- Post added at 11:41 PM ---------- Previous post was at 11:08 PM ----------
Anybody can tell me the link with the version B120? Thanks
Inxs05 said:
Ok, then this is the only version that works with our smartband, no?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
---------- Post added at 11:41 PM ---------- Previous post was at 11:08 PM ----------
Anybody can tell me the link with the version B120? Thanks
Click to expand...
Click to collapse
yes b120 is the only one i tried b127 and b130. Both have problems with 24/7 bluetooth connection. Random disconnects...
Link for b120: https://mega.co.nz/#!RsEVTAqb!aoyRaSbyzF1b7sLr8gAWsXfjVdk_6DCneSWcWmkzE3k
What does this B130 change?
Is there anyone flashed it?
Cooper100 said:
Hi,
Just flash this mega.co.nz/#!SJJzlaIa!y8rWY2XEStae6psg7NI_B_beW_BIZIf5tmov5Bc11rQ (B120SP04) which is a full factory image, flashable just as a local update, within the system or with the stock recovery, HM7 comes with this version in France), and you'll have the Western-European HM7.
Don't worry, HM7 in France are MT7-L09 too, and comes with the above ROM.
This image contains everything : CUST, KERNEL, BASEBAND, SYSTEM partition etc...
Welcome to France!
Click to expand...
Click to collapse
Thank you (downloaded) it's exactly the same (western european) I have allready from Huawei Italy consumer web page.. Unfortunately, I have "cust fail" at the end on every update with every rom via all three methods (local update, three buttons, hisuite) As a result, everything works but without "cust***" version in "about phone" and without some other (not critical) things.. (and no french apps installed by default) I've tried all roms (so I found this b130)..
HK_Jason_L said:
What does this B130 change?
Is there anyone flashed it?
Click to expand...
Click to collapse
feels like 127, with some russian apps (ivi, yandex search, etc)
Hi Everybody,
I recently buy a isudaar aa01 for audi a3 with lollipop. Today i try rooting and... nothing is working anymore. When i turn on the radio starts pooping up messages like "android service has stop working" ecc. :crying:
I entered recovery mode and done wipe data/cache but nothing changed. Can anyone please send me the backup/factory image to restore the operating system, or tell me a way to restore the radio? Please. :crying:
Thank you very much
First ... can you give us more information about your unit?
An image of device information could help
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
First ... can you give us more information about your unit?
An image of device information could help
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
Hi Ikerg, thank you very much for your help.
Id like to, but i can't do anything once the radio is turned on, i can just press "ok" on the pop ups that continuosly appear.
I can tell you that it is a rockchip Rk3188.
Here is the link of the product description (not so accurate) where i bought it: https://it.aliexpress.com/item/Andr...4.html?detailNewVersion=&categoryId=200000302
A friend of mine has an identical radio, except for the os since his radio runs android 4.4.4, maybe a screen of his device info might be usefull?
Thank you again
If your radio is the one of the publication...it is a mtcd.
Go to the mtcd thread and download the last ROM.
All mtcd have roms compatible...but not the mcu.
So..if you download from any mtcd source ROm....just be sure you only upgrade the dupdate.img file and NOT dmcu.img one
http://forum.xda-developers.com/showthread.php?t=3366561
You will have to enter into recovery mode and update the ROM.only (dupdate.img)
https://mega.nz/#!44dSiLRY!aqFq_hYLENSiwtel8bhXY24EzQLH1quzgU0VdgXfKME
But check first if your headunit is MTCD. There are other rk3188 units MTCB and MTCC which roms are not compatible
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
If your radio is the one of the publication...it is a mtcd.
Go to the mtcd thread and download the last ROM.
All mtcd have roms compatible...but not the mcu.
So..if you download from any mtcd source ROm....just be sure you only upgrade the dupdate.img file and NOT dmcu.img one
http://forum.xda-developers.com/showthread.php?t=3366561
You will have to enter into recovery mode and update the ROM.only (dupdate.img)
https://mega.nz/#!44dSiLRY!aqFq_hYLENSiwtel8bhXY24EzQLH1quzgU0VdgXfKME
But check first if your headunit is MTCD. There are other rk3188 units MTCB and MTCC which roms are not compatible
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
Hi Ikerg, thank you again.
I totally believe my radio is MTCB model, and i downloaded and pasted the corresponding update.img file into the sd card.
Now my problem is that i can't start the recovery mode, i've tried for over an hour. Could you help me again?
Thanks
First of all don't use the link I provided (as it is for mtcd).
If you cant enter into recovery you shall force to update from sdcard as follows:
http://forum.xda-developers.com/showthread.php?p=67184851
Enviado desde mi D6603 mediante Tapatalk
Thank you Ikerg;
does this step "8) Completely disable power radio. That is, even disable BAT wire (yellow), not to mention the ACC (red). It is best to simply pull the main connector on the rear panel."
mean that i have to take the autoradio outside from its lodging in the car?
thanks again
Sorry @Dek_92....you should ask on that thread...i just put on the direction to follow...I never had to use that method
But my sense tells me that you shall ensure the radio will.boot from cold.
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
Sorry @Dek_92....you should ask on that thread...i just put on the direction to follow...I never had to use that method
But my sense tells me that you shall ensure the radio will.boot from cold.
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
Again thank you @ikerg. Now, i've been enable to enter recovery mode, i tried to install a ROM for MTCB, but radio abort the installation stating that or the image is missing or it is broken or it is not compatible. i tried with Malysk ROM for MTCB. Can you tell me what should I try next?
Thank again
I don't know how to help you....please use the corresponding thread for MTCB on order people could help you
Enviado desde mi D6603 mediante Tapatalk
People. Good day to all of you. The situation is this: When I first bought the device I did it vi*a a Carrier (Claro Colombia). Since it was with a carrier, they had their custom ROM (Named as NXT L09C25B120). Due to the fact that carriers do not usually update devices, I successfully installed a ROM using dload method a few months back so I got EMUI 4.1 Sadly, I don't remember exactly the ROM I used but, I ended up with a ROM named NXT L09C900B320. I have read some posts about that particular ROM and say two things: 1) ROM is like an International version or something and...2) It does not update via OTA. I also may say that tried to unlock the Bootloader but it did not work. I tried to install another ROM (C432B320) using dload method and did not work either. My ROM has been doing weird things since I failed to install the C432 (lags, bad battery life and weird notifications stuff). I receive any advice you might give me.
Thanks a lot in advance
I can Help you with that. I am in Colombia too. Pm and we can chat
Enviado desde mi HUAWEI NXT-L09 mediante Tapatalk
juanq214 said:
I can Help you with that. I am in Colombia too. Pm and we can chat
Enviado desde mi HUAWEI NXT-L09 mediante Tapatalk
Click to expand...
Click to collapse
Me podrás ayudar a mi también tengo el mismo problema gracias
unfortunately i managed to do a stupid mistache, i upgraded the system to android 9 but it does not work on normal parameters so i tried to update the MCU and i think that was my stupidity, now is showing an weird screen in chinese everytime when i have an card on GPS slot. Now the system doesnt work properly anymore.
So i need an little bite of help from you guys.
PX5 MTCE_KLD_V 3.06.1 OCTACORE CORTEX [email protected] 3940MB From Pumkin
Pyconehd said:
unfortunately i managed to do a stupid mistache, i upgraded the system to android 9 but it does not work on normal parameters so i tried to update the MCU and i think that was my stupidity, now is showing an weird screen in chinese everytime when i have an card on GPS slot. Now the system doesnt work properly anymore.
So i need an little bite of help from you guys.
PX5 MTCE_KLD_V 3.06.1 OCTACORE CORTEX [email protected] 3940MB From Pumkin
Click to expand...
Click to collapse
How did you try to upgrade to android 9?
Did you upgrade your recovery first?
Enviado desde mi SM-G975F mediante Tapatalk
ikerg said:
How did you try to upgrade to android 9?
Did you upgrade your recovery first?
Enviado desde mi SM-G975F mediante Tapatalk
Click to expand...
Click to collapse
The upgrade was just fine but i was stupid enough to use one of the MTCE from an long list and now instead of MTCE_KLD_V 3.06.1 is an MTCE-KLD-3.01ss+by+cs-x(that was probably that my mistake), no lights on butons when i,m turning on the car lights.