Ascend Mate7 Firmware(MT7-L09,V100R001C00B130,Nonspecific(Russian),Channel-Others,Android 4.4.2,EMUI 3.0,05012PVA)
-> consumer.huawei.com/kz/support/downloads/detail/index.htm?id=34301
Who has the 127 on it can save them. No advantages.
For open boat loader, the recovery_h60.img work with it.
You mean
a) Ascend Mate7 Firmware(MT7-L09,V100R001C00B127,CEE&Nordic European,Channel-Others,Android 4.4.2,EMUI 3.0,05012PGF)
or
b) MT7-L09 Firmware(V100R001C00B127,Norwegian,Channel-Others,Android 4.4.2,EMUI 3.0)
or
c) something unofficial like "b127.zip"
I think official 130 is better than unofficial 127 for some people.
Of course if you nordic european is better stay on official Nordic European 127, if you installed it
Volgot said:
You mean
a) Ascend Mate7 Firmware(MT7-L09,V100R001C00B127,CEE&Nordic European,Channel-Others,Android 4.4.2,EMUI 3.0,05012PGF)
or
b) MT7-L09 Firmware(V100R001C00B127,Norwegian,Channel-Others,Android 4.4.2,EMUI 3.0)
or
c) something unofficial like "b127.zip"
I think official 130 is better than unofficial 127 for some people.
Of course if you nordic european is better stay on official Nordic European 127, if you installed it
Click to expand...
Click to collapse
I assume it's an UNOFFICIAL firmware, or al least not still tested and not officially release trough OTA update...the kernel is still "dirty" like in B127.
Can someone advice the differences in performance between B127 and B130, please?
By the way, any suggestion on how to re-turn kernel into "official" one and remove the "dirty" info on it?
tuddu said:
I assume it's an UNOFFICIAL firmware
Click to expand...
Click to collapse
Since it on official huawei web page "consumer.huawei.com" it was officially published for consumers in Kazahstan
tuddu said:
or al least not still tested
Click to expand...
Click to collapse
Maybe consumers in Kazahstan are testers?
tuddu said:
and not officially release trough OTA update...
Click to expand...
Click to collapse
Maybe because you are not in Kazahstan..
tuddu said:
the kernel is still "dirty" like in B127.
Click to expand...
Click to collapse
The whole android "is still dirty", it's not ios
Be aware:
a. Before upgrade, please guarantee the version you use is Huawei official version, or else it may upgrade failed or cause unknown problem.
b. Don’t try to upgrade software of other country or customization, or else it may upgrade failed or cause unknown problem.
Volgot said:
Be aware:
a.Before upgrade, please guarantee the version you use is Huawei official version, or else it may upgrade failed or cause unknown problem.
b.Don’t try to upgrade software of other country or customization, or else it may upgrade failed or cause unknown problem.
Click to expand...
Click to collapse
I upgraded from B127 without any problem
Volgot said:
Be aware:
a.Before upgrade, please guarantee the version you use is Huawei official version, or else it may upgrade failed or cause unknown problem.
b.Don’t try to upgrade software of other country or customization, or else it may upgrade failed or cause unknown problem.
Click to expand...
Click to collapse
Upgraded my german b120, no Problem. Why should an other country be a problem?
Be sure you have stock recovery (and of course stock huawei rom (no kangvip)) and there should be no problems.
I tested b130 and i'm back on b120. Bluetooth is still buggy for me, my swr10 smartband is disconnected randomly from time to time. Very annoying.
desmoloch said:
Upgraded my german b120, no Problem. Why should an other country be a problem?
Be sure you have stock recovery (and of course stock huawei rom (no kangvip)) and there should be no problems.
I tested b130 and i'm back on b120. Bluetooth is still buggy for me, my swr10 smartband is disconnected randomly from time to time. Very annoying.
Click to expand...
Click to collapse
I never had problem with blutooth (I use it in my car for hands free only)
Btw, I have no problem to install any rom with cwm recovery via 3 buttons method.
What country you are from? Have you original stock image? I had big problem after bloody rom from China, with "custom fail" on any rom installed after that (even on 120)
Volgot said:
I never had problem with blutooth (I use it in my car for hands free only)
Btw, I have no problem to install any rom with cwm recovery via 3 buttons method.
What country you are from? Have you original stock image? I had big problem after bloody rom from China, with "custom fail" on any rom installed after that (even on 120)
Click to expand...
Click to collapse
From germany, stock recovery and 120 Rom. Ah Ok i thought problems could only be if cwm is installed.
I upgraded with the huawei APP (upgrade in dload folder in SD card). That worked fine.
My bluetooth is working too, but 24/7 connection is a Problem. My smartband is connected all the time and i activated the "vibrate when out of range" Option. Randomly about every two hours my smartband vibrates even its in range. My mate shows disconnected, connected, disconnected... and so on. Thats why i am back on b120
desmoloch said:
From germany, stock recovery and 120 Rom. Ah Ok i thought problems could only be if cwm is installed.
I upgraded with the huawei APP (upgrade in dload folder in SD card). That worked fine.
My bluetooth is working too, but 24/7 connection is a Problem. My smartband is connected all the time and i activated the "vibrate when out of range" Option. Randomly about every two hours my smartband vibrates even its in range. My mate shows disconnected, connected, disconnected... and so on. Thats why i am back on b120
Click to expand...
Click to collapse
Hi, i have a smartband Sony too, i have the same problem. With the b120 version worls ok but now with b130 disconnected all the time. How can i go back to version b120?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
I'm in France now with a french version of mt7-l09, and I'm looking for a full french stock factory image (not just a rom update)
Volgot said:
I'm in France now with a french version of mt7-l09, and I'm looking for a full french stock factory image (not just a rom update)
Click to expand...
Click to collapse
Hi,
Just flash this mega.co.nz/#!SJJzlaIa!y8rWY2XEStae6psg7NI_B_beW_BIZIf5tmov5Bc11rQ (B120SP04) which is a full factory image, flashable just as a local update, within the system or with the stock recovery, HM7 comes with this version in France), and you'll have the Western-European HM7.
Don't worry, HM7 in France are MT7-L09 too, and comes with the above ROM.
This image contains everything : CUST, KERNEL, BASEBAND, SYSTEM partition etc...
Welcome to France!
Inxs05 said:
Hi, i have a smartband Sony too, i have the same problem. With the b120 version worls ok but now with b130 disconnected all the time. How can i go back to version b120?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
Click to expand...
Click to collapse
Can anybody help me?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
I was on 127 with CWM recovery and root, flashed stock recovery and flashed local update 130 today. Everything is working fine, I flashed it because newer kernel in this version.
Inxs05 said:
Hi, i have a smartband Sony too, i have the same problem. With the b120 version worls ok but now with b130 disconnected all the time. How can i go back to version b120?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
Click to expand...
Click to collapse
Thank you!! Thats means i am not the only one
Back to b120 is the same as upgrade: place the b120 update.app in the folder dload on your SD card and update with huawai update APP (local update)
desmoloch said:
Thank you!! Thats means i am not the only one
Back to b120 is the same as upgrade: place the b120 update.app in the folder dload on your SD card and update with huawai update APP (local update)
Click to expand...
Click to collapse
Ok, then this is the only version that works with our smartband, no?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
---------- Post added at 11:41 PM ---------- Previous post was at 11:08 PM ----------
Anybody can tell me the link with the version B120? Thanks
Inxs05 said:
Ok, then this is the only version that works with our smartband, no?
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
---------- Post added at 11:41 PM ---------- Previous post was at 11:08 PM ----------
Anybody can tell me the link with the version B120? Thanks
Click to expand...
Click to collapse
yes b120 is the only one i tried b127 and b130. Both have problems with 24/7 bluetooth connection. Random disconnects...
Link for b120: https://mega.co.nz/#!RsEVTAqb!aoyRaSbyzF1b7sLr8gAWsXfjVdk_6DCneSWcWmkzE3k
What does this B130 change?
Is there anyone flashed it?
Cooper100 said:
Hi,
Just flash this mega.co.nz/#!SJJzlaIa!y8rWY2XEStae6psg7NI_B_beW_BIZIf5tmov5Bc11rQ (B120SP04) which is a full factory image, flashable just as a local update, within the system or with the stock recovery, HM7 comes with this version in France), and you'll have the Western-European HM7.
Don't worry, HM7 in France are MT7-L09 too, and comes with the above ROM.
This image contains everything : CUST, KERNEL, BASEBAND, SYSTEM partition etc...
Welcome to France!
Click to expand...
Click to collapse
Thank you (downloaded) it's exactly the same (western european) I have allready from Huawei Italy consumer web page.. Unfortunately, I have "cust fail" at the end on every update with every rom via all three methods (local update, three buttons, hisuite) As a result, everything works but without "cust***" version in "about phone" and without some other (not critical) things.. (and no french apps installed by default) I've tried all roms (so I found this b130)..
HK_Jason_L said:
What does this B130 change?
Is there anyone flashed it?
Click to expand...
Click to collapse
feels like 127, with some russian apps (ivi, yandex search, etc)
Related
http://www.hihonor.com/en/pages/support#?view=downloads
Download from Honor and apply manually by unpacking update.app file to sdcard.
Sent from my PE-TL10 using Tapatalk
RedMist said:
http://www.hihonor.com/en/pages/support#?view=downloads
Download from Honor and apply manually by unpacking update.app file to sdcard.
Click to expand...
Click to collapse
Anyone please explain, is there any difference between that forementioned version (B521) and the one issued on 25th ot Sept from Honor India (B507/B510).
I did updated with Indian version and all seems just fine, no bugs for now. Is there any need to re-apply this version now.
Thanks
RedMist said:
Download from Honor and apply manually by unpacking update.app file to sdcard.
Sent from my PE-TL10 using Tapatalk
Click to expand...
Click to collapse
I cant see the download link for 6+ :/
I can only see the download link for 6 Android 5.1 :/
can u give me a direct download link please ..
Regards
http://7961b64fc16ad15a92ef-9f98f1e...cf3.rackcdn.com/downloads/PE-TL10C900B324.zip
Would it be ok to apply this to my honor 6 plus here in the UK?
Also,after the lolipop update is double tap to wake still available?,thanks in advance for any help.
wildcat777 said:
Also,after the lolipop update is double tap to wake still available?
Click to expand...
Click to collapse
Nope, with beta B305 not aviable... I will try this one now.. let u know
in official also doesn't work 2tw.
B324 official everything is working. Dt2w also. Faster then in kitkat
Gesendet von meinem PE-TL10 mit Tapatalk
Guys i upgraded from B135 (KitKat) to the official Lollipop (B324) .. now i can't choose which Sim Card uses 3G/4G and also Motion Control is empty . Do you have same issues ?
Does it fits on the H6 L12 version?
I found some differences from the international one to the Chinese one like the notification management on the lockscreen, I had whatsapp notification in lollipop style but now, with the official international, I have the normal notification from the status bar
Edit: my bad, found it
everything in this official firmware works fine, better than kitkat. just light painting mode in camera options is missing (in beta version was present). in case of troubles i suggest a factory reset
double tap to wake up screen is not working on this update, anyone know how to solve this?
wildcat777 said:
Would it be ok to apply this to my honor 6 plus here in the UK?
Also,after the lolipop update is double tap to wake still available?,thanks in advance for any help.
Click to expand...
Click to collapse
Yes. I'm on Three, and this works fine.
No. It's broken
mikey160984 said:
B324 official everything is working. Dt2w also. Faster then in kitkat
Gesendet von meinem PE-TL10 mit Tapatalk
Click to expand...
Click to collapse
Hi,
DT2W is working after you reset? Because some of them do not have it. How its for you? What other features are missing than in kitkat? What about battery?
And what about adding button to hide navbar?
Hello everyone , I'm new and I wonder if I can update my h6 + p - TL10 Chinese with the latest firmware lollipop . I have just upgraded OTA and I version PE - TL10V100R001CHNC00B260
KIT KAT 4.4.2
any one
i need rollback file from 3.1 to 3.0
You can install ver 5.10.1 at Chinese EMUI website.
I took the plunge and upgraded and can confirm that double touch to wake does
not work and the slide to unlock screen is in Chinese text.
Where do you guys look for updates?
I look on this site: http://www.hihonor.com/en/pages/support#?view=downloads
As well as the official site (in Chinese): http://www.emui.com/cn/plugin.php?id=hwdownload&mod=detail&mid=125
Seems like they have updated on 30th september, newest (beta?) version = 5.10.1
Who did it already and can share experience?
currently on B324 emui 3.1 so far so good
Hi,
it is now about 2 weeks that you can download the B324 update.
Just wondering if anyone got the B324 update for the TL09 over OTA? I know it may take some time but I still didn't got it after 2 weeks in Germany.
I read a lot that people in the beta got the update over OTA. But none that received it from a official version.
And yes I read that I can download it if I really want it and install it over the sd card manually. But it dosent work for me. The installation fails and I downloaded it several times. I tried:
MT7-L09_Firmware_C900B324_Android 5.1.1_EMUI 3.1
and
HUAWEI_MT7-L09_Firmware_Android 5.1.1_EMUI 3.1_C900B324_Italy_Spain_Channel-Others (apparently I'm not allowed to link but both are from official huawei download page.)
I currently run: MT7-L09V100R001C00B145
So please write if you recived the update over OTA and in which country.
Thanks a lot.
Did you factory reset before trying to upgrade?
Im on the same B145, and no OTA. In spain&itali rom says to we can update b145 but update fails.
Im in Slovenia maybe I must have difrent version. Is the location important?
Poslano z mojega HUAWEI MT7-L09 z uporabo Tapatalk
Yes I did factory reset. And deleted the cache but the update fails.
I think it is just important if you have the international or asia version.
I just wanted to know the country because I read that the update should be available for people in England at the 11. Oct.
And you would see if you get the OTA pretty soon if some people from your country received the update.
But maybe it takes so long because you should not get the full 1,19 GB via OTA because the update to lollipop should only be a few hundred MB. Not sure if they even finished it.
Sembeth said:
HUAWEI_MT7-L09_Firmware_Android 5.1.1_EMUI 3.1_C900B324_Italy_Spain_Channel-Others
Click to expand...
Click to collapse
Under what Region did you find the above firmware? I have checked the downloads page for both Spain and Italy and that firmware is nowhere to be found.
Here you have
http://consumer.huawei.com/es/support/search/index.htm?keywords=mt7
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Huawei support advised to wait for OTA update, but also said if I can't wait, then I can download from official website.
Well, basically, such answer can be counted as no answer.
Sent from my HUAWEI MT7-L09 using Tapatalk
Sembeth said:
Hi,
it is now about 2 weeks that you can download the B324 update.
Just wondering if anyone got the B324 update for the TL09 over OTA? I know it may take some time but I still didn't got it after 2 weeks in Germany.
I read a lot that people in the beta got the update over OTA. But none that received it from a official version.
And yes I read that I can download it if I really want it and install it over the sd card manually. But it dosent work for me. The installation fails and I downloaded it several times. I tried:
MT7-L09_Firmware_C900B324_Android 5.1.1_EMUI 3.1
and
HUAWEI_MT7-L09_Firmware_Android 5.1.1_EMUI 3.1_C900B324_Italy_Spain_Channel-Others (apparently I'm not allowed to link but both are from official huawei download page.)
I currently run: MT7-L09V100R001C00B145
So please write if you recived the update over OTA and in which country.
Thanks a lot.
Click to expand...
Click to collapse
you have to go back to 120sp04
Thanks papoose515 for the information.
But why is in the "MT7-L09C900B324 SD card Software Upgrade Guideline(For Service).doc" from "HUAWEI_MT7-L09_Firmware_Android 5.1.1_EMUI 3.1_C900B324_Italy_Spain_Channel-Others.zip" that you can upgrade from the versions:
MT7-L09 V100R001C00B127SP03
MT7-09 V100R001C00B145
Mt7-L09V100R001C900B308
MT7-L09C900B317 and above?
Sembeth said:
Thanks papoose515 for the information.
But why is in the "MT7-L09C900B324 SD card Software Upgrade Guideline(For Service).doc" from "HUAWEI_MT7-L09_Firmware_Android 5.1.1_EMUI 3.1_C900B324_Italy_Spain_Channel-Others.zip" that you can upgrade from the versions:
MT7-L09 V100R001C00B127SP03
MT7-09 V100R001C00B145
Mt7-L09V100R001C900B308
MT7-L09C900B317 and above?
Click to expand...
Click to collapse
Because that's recommend software to update from and it's tested by Huawei and you will not have some fantom bugs as some of users have - usually users that didn't follow Huawei instructions for update.
Sent from my HUAWEI MT7-L09 using Tapatalk
The Mate 7 B324 OTA is rolling out in the Netherlands right now, haven`t received it myself on B145 yet
gee2012 said:
The Mate 7 B324 OTA is rolling out in the Netherlands right now, haven`t received it myself on B145 yet
Click to expand...
Click to collapse
Where did you got that information?
And thanks a lot for sharing.
Sembeth said:
Where did you got that information?
And thanks a lot for sharing.
Click to expand...
Click to collapse
Scource: http://androidworld.nl/nieuws/huawei-mate-7-krijgt-android-51-nederland/ (Dutch)
I recently bought a P8 GRA-UL10 and next thing i did was to update to MM but it turns out it's "beta" in Europe, i think only in Asia there's a stable version so far.
So i tried to rollback with the, only, two firmware i found either on XDA or Google and nothing successful, it just don't downgrade poping always the same error.
I tried VIA hardware combination and with DIAL-PAD code, it turns the same error.
Anyone with an idea what can be done?
I recently have the same problem!
I just got my phone recently from //Buymobilebd I am facing the same problem, I ask them for help so they took my phone into their service center for fixing this.
They fixed it for free?
Enviado do meu HUAWEI GRA-UL10 através de Tapatalk
migueli2 said:
I recently bought a P8 GRA-UL10 and next thing i did was to update to MM but it turns out it's "beta" in Europe, i think only in Asia there's a stable version so far.
So i tried to rollback with the, only, two firmware i found either on XDA or Google and nothing successful, it just don't downgrade poping always the same error.
I tried VIA hardware combination and with DIAL-PAD code, it turns the same error.
Anyone with an idea what can be done?
Click to expand...
Click to collapse
I also have that version, and yes it is in beta, but it is pretty much stable and ready for the public, you can use it with no problem, unless you are facing some bugs I don't understand why do you want to downgrade. If your model is from china I can maybe help you find the solution if you still want to downgrade.
fede011 said:
I also have that version, and yes it is in beta, but it is pretty much stable and ready for the public, you can use it with no problem, unless you are facing some bugs I don't understand why do you want to downgrade. If your model is from china I can maybe help you find the solution if you still want to downgrade.
Click to expand...
Click to collapse
Only the thing that camera lost to many quality...
Rest is fine with some improvements.
Enviado do meu HUAWEI GRA-UL10 através de Tapatalk
Hello
I was trying to change my huawei mate 8 to a c432 to get faster updates as mine is with a pretty old version.
I used SRK Tool to unlock the bootloader and root and then i choose to change the oeminfo and custombin to the one for c432. then i reboot,
But now my phone does not boot into android, its just stuck on twrp.
i havent flashed anything and i do have my backup of oeminfo and custombin.
Any way i can recover it to boot again into android?
Thanks
What was you original firmware?
Watch this video how to debrand
I was on B120 from CLARO carrier
aeorcr said:
I was on B120 from CLARO carrier
Click to expand...
Click to collapse
I've had like same issue like u, so i did factory reset and wipe so i reinstalled rom by update menu - fone booted OK
Enviado de meu HUAWEI NXT-L29 usando Tapatalk
thanks factory reset did the trick for me as well.
Now I will try to follow that video to see if i can succesfully change to c432.
Thanks a lot
hi i followed the tutorial and i changed the buildprop to NextL00C432B011 and did the dload update for L09.
i ended up with L29 under the update screen? My phone was originally an L09 (single sim).
Will i have any issues running L29?
aeorcr said:
hi i followed the tutorial and i changed the buildprop to NextL00C432B011 and did the dload update for L09.
i ended up with L29 under the update screen? My phone was originally an L09 (single sim).
Will i have any issues running L29?
Click to expand...
Click to collapse
I don't think so as long as all the networks are working fine.
gm007 said:
I don't think so as long as all the networks are working fine.
Click to expand...
Click to collapse
Awesome, since i have full signal and wifi/3g is working fine i think im ok, cool.
One last thing i dload B180, the phone OTA to b192, I thought it wil be updated to b320 (emui 4.1) but it didnt.
do you guys think this b320 fw was pulled from huawei? the official dowload link for the file is not working from the FW thread here on xda.
aeorcr said:
Awesome, since i have full signal and wifi/3g is working fine i think im ok, cool.
One last thing i dload B180, the phone OTA to b192, I thought it wil be updated to b320 (emui 4.1) but it didnt.
do you guys think this b320 fw was pulled from huawei? the official dowload link for the file is not working from the FW thread here on xda.
Click to expand...
Click to collapse
Yes b320 never came to international version,and wasn't that good when I tried it.
Anyway nougat is coming soon with emui 5.
Oh i see, ok i will wait for the Ota of EMUI 5.0
thanks
aeorcr said:
Awesome, since i have full signal and wifi/3g is working fine i think im ok, cool.
One last thing i dload B180, the phone OTA to b192, I thought it wil be updated to b320 (emui 4.1) but it didnt.
do you guys think this b320 fw was pulled from huawei? the official dowload link for the file is not working from the FW thread here on xda.
Click to expand...
Click to collapse
Hi, i know this is a old post.
I need to know when u converted your L09 to L29 do u remember if u had dual sim option in Settings?
Hello I'm an android developer and my mate 8 is on android 7.(NXT-L29C185B560).
I need to write apps for android Oreo or Pie so I need to upgrade Huawie didn't send an update for my phone.So I need to upgrade with custom ROM I need help finding one.
The phone is rooted and has TWRP insalled on it already.I also want the oero or pie custom rom have the ability to be rooted.:good:
Thank You.
Can I trust this tool:
https://ministryofsolutions.com/2016/09/guidehow-to-change-region-of-mate7-mate8.html
And make my phone region to china and then install the latest available update?
you can by using SRK tools to debrand to chinese then update to oreo
Is it safe tool ?
And can I downgrade to nought if I want?
Last . does it format my data ?
Thanks a lot
M.abdo said:
you can by using SRK tools to debrand to chinese then update to oreo
Click to expand...
Click to collapse
Sent from my HUAWEI NXT-L29 using Tapatalk
it's safe i rebranded using it
you can return to naugat but it's unsafe to rebrand from chinese again
it will remove all your internal data as you will downgrade first before rebranding
Many thanks foe u
Do you have a link for mor information about these tool
I would like to know a lot before make these step . I'm so worried
M.abdo said:
it's safe i rebranded using it
you can return to naugat but it's unsafe to rebrand from chinese again
it will remove all your internal data as you will downgrade first before rebranding
Click to expand...
Click to collapse
Sent from my HUAWEI NXT-L29 using Tapatalk
Okay sounds cool I'll rebrand the question remained is what brand has the latest update?(Please provide a link to .zip update) and the last question is,if I rebrand before I install oreo what exactly happens I turn on my phone and it has a frimware from Africa but its brand is now China!Will that be able to turn on?Or I should use TWRP to install Chinese firmware from SD card.
Since I'm an android developer I need to have multiple os if possible.Has anyone tried this Or any better one?Can I use it in this case?
https://forum.xda-developers.com/cr...ualboot-dualbootpatcher-simpler-dual-t3297414
M.abdo said:
it's safe i rebranded using it
you can return to naugat but it's unsafe to rebrand from chinese again
it will remove all your internal data as you will downgrade first before rebranding
Click to expand...
Click to collapse
how did u downgrade from emui 8 to 7 am trying to do this for 5 days
Still waiting for personal experience
Any one try it.
Sent from my HUAWEI NXT-L29 using Tapatalk
Yeah me too.Please guide us the people who have done it.
AZ shabrani said:
how did u downgrade from emui 8 to 7 am trying to do this for 5 days
Click to expand...
Click to collapse
You can using hisuit by searching another firmware
---------- Post added at 04:51 AM ---------- Previous post was at 04:46 AM ----------
stevemoretz said:
Okay sounds cool I'll rebrand the question remained is what brand has the latest update?(Please provide a link to .zip update) and the last question is,if I rebrand before I install oreo what exactly happens I turn on my phone and it has a frimware from Africa but its brand is now China!Will that be able to turn on?Or I should use TWRP to install Chinese firmware from SD card.
Click to expand...
Click to collapse
Any chinese brand TL, AL, DL i'm dual sim so i rebranded to DL version
You need to return first to marchemelo to rebrand to chinese firmware after rebranding your phone will be the same except some extra chinese applications you can uninstall
I used srktools can't find the guid now but you can search for it in youtube ot has a video guide thier
M.abdo said:
You can using hisuit by searching another firmware
---------- Post added at 04:51 AM ---------- Previous post was at 04:46 AM ----------
Any chinese brand TL, AL, DL i'm dual sim so i rebranded to DL version
You need to return first to marchemelo to rebrand to chinese firmware after rebranding your phone will be the same except some extra chinese applications you can uninstall
I used srktools can't find the guid now but you can search for it in youtube ot has a video guide thier
Click to expand...
Click to collapse
So I'll go to marshmelo of my region and then rebrand and then install oero the only question left is in the process of rebranding do I need any network connection or it's offline?I don't have stable network and I'm afraid terrible things happen.
stevemoretz said:
So I'll go to marshmelo of my region and then rebrand and then install oero the only question left is in the process of rebranding do I need any network connection or it's offline?I don't have stable network and I'm afraid terrible things happen.
Click to expand...
Click to collapse
You don't need internet connection while debranding you will only need while updating to oreo
M.abdo said:
You don't need internet connection while debranding you will only need while updating to oreo
Click to expand...
Click to collapse
How can I access huawie server to get marshmellow update.zip.I didn't find any link for L29-C185
So I don't know the exact version B?? for marshmellow.
stevemoretz said:
How can I access huawie server to get marshmellow update.zip.I didn't find any link for L29-C185
So I don't know the exact version B?? for marshmellow.
Click to expand...
Click to collapse
You can try using firmware finder or rollback using hisuit
M.abdo said:
You can try using firmware finder or rollback using hisuit
Click to expand...
Click to collapse
I have the firmware finder it found no FULL OTA from marshmelo the first full ota is for nougat.
http://update.hicloud.com:8180/TDS/...2227/f2/full/hw/eu/update_data_full_hw_eu.zip
The links from hicloud says that the files have been deleted.
I don't have a reliable internet connection I rather download zip files then update because I don't want in the middle of the operation things go wrong that's why I didn't try HiSuite.Any live link would be appreciated.
I found NXT-L29BC185B200 live link right now.It's android 6.0.1 I'll go for it tnx.
M.abdo said:
You can try using firmware finder or rollback using hisuit
Click to expand...
Click to collapse
I download B200 tried to install via dload failed said (incompatiblity with current version ) tried with twrp failed.And I wiped my OS and tried again and failed.And lost my OS.Sort of now it shows me android logo instead of huawie logo and it's stuck on the initial setup of nougat.
https://forum.xda-developers.com/mate-8/general/guide-how-to-downgrade-mate-8-emui-5-to-t3515202
I found this and it says the nougat version must be b500 but mine was b560 and tried to install the rollback and it failed again.I don't know what to do?I need my phone.
Couldn't find any download link of b500 did you do that on your b500 or b560?
If b500 please give me a link of NXT-L29C185B500
Tried again and it didn't give me error this time the point is that it doesn't run on B500 it makes your device B500!
After installing marshmellow the bootloader is locked again!