unfortunately i managed to do a stupid mistache, i upgraded the system to android 9 but it does not work on normal parameters so i tried to update the MCU and i think that was my stupidity, now is showing an weird screen in chinese everytime when i have an card on GPS slot. Now the system doesnt work properly anymore.
So i need an little bite of help from you guys.
PX5 MTCE_KLD_V 3.06.1 OCTACORE CORTEX [email protected] 3940MB From Pumkin
Pyconehd said:
unfortunately i managed to do a stupid mistache, i upgraded the system to android 9 but it does not work on normal parameters so i tried to update the MCU and i think that was my stupidity, now is showing an weird screen in chinese everytime when i have an card on GPS slot. Now the system doesnt work properly anymore.
So i need an little bite of help from you guys.
PX5 MTCE_KLD_V 3.06.1 OCTACORE CORTEX [email protected] 3940MB From Pumkin
Click to expand...
Click to collapse
How did you try to upgrade to android 9?
Did you upgrade your recovery first?
Enviado desde mi SM-G975F mediante Tapatalk
ikerg said:
How did you try to upgrade to android 9?
Did you upgrade your recovery first?
Enviado desde mi SM-G975F mediante Tapatalk
Click to expand...
Click to collapse
The upgrade was just fine but i was stupid enough to use one of the MTCE from an long list and now instead of MTCE_KLD_V 3.06.1 is an MTCE-KLD-3.01ss+by+cs-x(that was probably that my mistake), no lights on butons when i,m turning on the car lights.
Related
Im looking to update my Eonon G2111 from 4.2 to 4.4
I have access to the Good drive that holds all the updates but I don't know which once to pick.
Any Idea?
Kernel:
3.4.5 #513 SMP
Build:
Lemon-userdebug 4.2.1 JR003C eng..20150120.232605 Test-keys
MCU:
Lemon_CP_1.18 Sept 17 2014
Model:
Full AOSP on MSTAR Cendric3
I hope this information helps?
Thanks
Jon
Me Too still looks for updates/upgrade
my advice don't do it if everything working right.
I have Eonon GA2114 and I've update the MCU now I have problems ( Link )
so if you want to update your system I guess you need to update your MCU as well , and if you want to do that email the company and ask for updates maybe they will give the decent one and then you can do it safely .
Unfortunately, they claim there is no new update.
Would you have any idea how to add your own startup logo to the system?
Jon
Go to settings => Factory settings
Password :126
then you can choose your logo
Sent from my C6602 using XDA Free mobile app
Hi and good day I just got an update from Eonon for my GA2114 Not sure who to send them to or where to post them
MCU Version
MTCB-KDL-V2.79
Andriod Ver 4.4.4_27112015
They sent me both MCU Img and update img
c1bear said:
Hi and good day I just got an update from Eonon for my GA2114 Not sure who to send them to or where to post them
MCU Version
MTCB-KDL-V2.79
Andriod Ver 4.4.4_27112015
They sent me both MCU Img and update img
Click to expand...
Click to collapse
Looking at an Eonon unit and several others... If you had it to do over, would you buy it again?
If you wouldn't buy it again, what would you buy instead?
TIA
c1bear said:
Hi and good day I just got an update from Eonon for my GA2114 Not sure who to send them to or where to post them
MCU Version
MTCB-KDL-V2.79
Andriod Ver 4.4.4_27112015
They sent me both MCU Img and update img
Click to expand...
Click to collapse
Can you please upload it?
I need the MCU Img, and if you can also upload the Rom file that would be great
thanks
Hello.
Still no update for this radio?
I would like to switch to 5.1 for Android auto ... An idea? Aldo for my 307 I do not have a case for the outline .. Sorry for my english.. Thank you !!!
Envoyé de mon Redmi 3 en utilisant Tapatalk
Up ?
Envoyé de mon Redmi 3 en utilisant Tapatalk
Up
Envoyé de mon Redmi 3 en utilisant Tapatalk
I recently bought a P8 GRA-UL10 and next thing i did was to update to MM but it turns out it's "beta" in Europe, i think only in Asia there's a stable version so far.
So i tried to rollback with the, only, two firmware i found either on XDA or Google and nothing successful, it just don't downgrade poping always the same error.
I tried VIA hardware combination and with DIAL-PAD code, it turns the same error.
Anyone with an idea what can be done?
I recently have the same problem!
I just got my phone recently from //Buymobilebd I am facing the same problem, I ask them for help so they took my phone into their service center for fixing this.
They fixed it for free?
Enviado do meu HUAWEI GRA-UL10 através de Tapatalk
migueli2 said:
I recently bought a P8 GRA-UL10 and next thing i did was to update to MM but it turns out it's "beta" in Europe, i think only in Asia there's a stable version so far.
So i tried to rollback with the, only, two firmware i found either on XDA or Google and nothing successful, it just don't downgrade poping always the same error.
I tried VIA hardware combination and with DIAL-PAD code, it turns the same error.
Anyone with an idea what can be done?
Click to expand...
Click to collapse
I also have that version, and yes it is in beta, but it is pretty much stable and ready for the public, you can use it with no problem, unless you are facing some bugs I don't understand why do you want to downgrade. If your model is from china I can maybe help you find the solution if you still want to downgrade.
fede011 said:
I also have that version, and yes it is in beta, but it is pretty much stable and ready for the public, you can use it with no problem, unless you are facing some bugs I don't understand why do you want to downgrade. If your model is from china I can maybe help you find the solution if you still want to downgrade.
Click to expand...
Click to collapse
Only the thing that camera lost to many quality...
Rest is fine with some improvements.
Enviado do meu HUAWEI GRA-UL10 através de Tapatalk
Hi Everybody,
I recently buy a isudaar aa01 for audi a3 with lollipop. Today i try rooting and... nothing is working anymore. When i turn on the radio starts pooping up messages like "android service has stop working" ecc. :crying:
I entered recovery mode and done wipe data/cache but nothing changed. Can anyone please send me the backup/factory image to restore the operating system, or tell me a way to restore the radio? Please. :crying:
Thank you very much
First ... can you give us more information about your unit?
An image of device information could help
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
First ... can you give us more information about your unit?
An image of device information could help
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
Hi Ikerg, thank you very much for your help.
Id like to, but i can't do anything once the radio is turned on, i can just press "ok" on the pop ups that continuosly appear.
I can tell you that it is a rockchip Rk3188.
Here is the link of the product description (not so accurate) where i bought it: https://it.aliexpress.com/item/Andr...4.html?detailNewVersion=&categoryId=200000302
A friend of mine has an identical radio, except for the os since his radio runs android 4.4.4, maybe a screen of his device info might be usefull?
Thank you again
If your radio is the one of the publication...it is a mtcd.
Go to the mtcd thread and download the last ROM.
All mtcd have roms compatible...but not the mcu.
So..if you download from any mtcd source ROm....just be sure you only upgrade the dupdate.img file and NOT dmcu.img one
http://forum.xda-developers.com/showthread.php?t=3366561
You will have to enter into recovery mode and update the ROM.only (dupdate.img)
https://mega.nz/#!44dSiLRY!aqFq_hYLENSiwtel8bhXY24EzQLH1quzgU0VdgXfKME
But check first if your headunit is MTCD. There are other rk3188 units MTCB and MTCC which roms are not compatible
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
If your radio is the one of the publication...it is a mtcd.
Go to the mtcd thread and download the last ROM.
All mtcd have roms compatible...but not the mcu.
So..if you download from any mtcd source ROm....just be sure you only upgrade the dupdate.img file and NOT dmcu.img one
http://forum.xda-developers.com/showthread.php?t=3366561
You will have to enter into recovery mode and update the ROM.only (dupdate.img)
https://mega.nz/#!44dSiLRY!aqFq_hYLENSiwtel8bhXY24EzQLH1quzgU0VdgXfKME
But check first if your headunit is MTCD. There are other rk3188 units MTCB and MTCC which roms are not compatible
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
Hi Ikerg, thank you again.
I totally believe my radio is MTCB model, and i downloaded and pasted the corresponding update.img file into the sd card.
Now my problem is that i can't start the recovery mode, i've tried for over an hour. Could you help me again?
Thanks
First of all don't use the link I provided (as it is for mtcd).
If you cant enter into recovery you shall force to update from sdcard as follows:
http://forum.xda-developers.com/showthread.php?p=67184851
Enviado desde mi D6603 mediante Tapatalk
Thank you Ikerg;
does this step "8) Completely disable power radio. That is, even disable BAT wire (yellow), not to mention the ACC (red). It is best to simply pull the main connector on the rear panel."
mean that i have to take the autoradio outside from its lodging in the car?
thanks again
Sorry @Dek_92....you should ask on that thread...i just put on the direction to follow...I never had to use that method
But my sense tells me that you shall ensure the radio will.boot from cold.
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
Sorry @Dek_92....you should ask on that thread...i just put on the direction to follow...I never had to use that method
But my sense tells me that you shall ensure the radio will.boot from cold.
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
Again thank you @ikerg. Now, i've been enable to enter recovery mode, i tried to install a ROM for MTCB, but radio abort the installation stating that or the image is missing or it is broken or it is not compatible. i tried with Malysk ROM for MTCB. Can you tell me what should I try next?
Thank again
I don't know how to help you....please use the corresponding thread for MTCB on order people could help you
Enviado desde mi D6603 mediante Tapatalk
Can anybody help me. I have a Head Unit made by Rupse. It is sold by Witson Model Number W2-222. I have been unable to recover this unit after flash attempt. It is a PX5 FYT 6026 Core Board on a S200 main board. Is there anybody that can help me recover it. See pics below.
h**ps://photos.app.goo.gl/C1YaYLiC7WLASAK17
Hi, can you enter on recovery or the unit is completely dead?
Enviado do meu ASUS_Z01RD através do Tapatalk
serpa1982 said:
Hi, can you enter on recovery or the unit is completely dead?
Enviado do meu ASUS_Z01RD através do Tapatalk
Click to expand...
Click to collapse
The unit does not have a recovery. I was never able to enter recovery mode. The unit gets power but nothing boots.
Maybe it works:
I also have a CPU Cortex-A53 PX5
Use the PX5 Upgrade-Tool and make a Boot-Stick with your original Firmware
https://forum.xda-developers.com/an...oying-qd-saved-rooting-supersu-brick-t3903302
Scheitig said:
Maybe it works:
I also have a CPU Cortex-A53 PX5
Use the PX5 Upgrade-Tool and make a Boot-Stick with your original Firmware
https://forum.xda-developers.com/an...oying-qd-saved-rooting-supersu-brick-t3903302
Click to expand...
Click to collapse
The Firmware they sent met does not have an sdupdate.img file. Also no Demo folder.
Any other ideas?
I have an android head unit with 7.1.2 and i want tu upgrde to newer android.
In android when I go to system update and press it, nothing happens.
when I connect wire key_1 to ground as a manufacturer sais, y press reset button and apears updating, but in a second sais update end and dont load any files, then the update dont run
what its the problem? I need to be root? i tryed with a lot of updates files, extrac their in the root of sdcard....
Procesor type ultraOcta-T8
android 7.1.2
MCU 5.3.19-11-13-453101-1711011
version sistema V9.2.2_20171101.151913_KED7
banda base MF110
Help me please!!!
thanks
So the name of the files need to match the ones for android 7 then the system will see them when you press the update button in the settings
CrypticVorttex said:
So the name of the files need to match the ones for android 7 then the system will see them when you press the update button in the settings
Click to expand...
Click to collapse
the names of the files in V9.2.2_20171101.151913_KED7 are:
b1604ca8-7757-11e7-906d-3390eed0c0c2
b278023e-7757-11e7-bb3a-07933d230b22.0
b278023e-7757-11e7-bb3a-07933d230b22.1
b278023e-7757-11e7-bb3a-07933d230b22.2
but the names in the update file V9.3.1_20180619.172554_KED1-i140 are:
21a4f59a-0a56-11e8-91c9-971a30d57911
22e42020-0a56-11e8-abef-631acfb3beab.0
22e42020-0a56-11e8-abef-631acfb3beab.1
22e42020-0a56-11e8-abef-631acfb3beab.2
2516e792-0a56-11e8-8f93-f3371fae028e
there are one file more in update, waht names are the correct?
Can I rename V9.3.1_20180619.172554_KED1-i140 file to update.zip and try?
Update.zip will not work , they wont update from a zip file from within the system (I don't think)
I think you should update your current firmware to a v9.2.2 2018 and go from there, I think that firmware has the correct number of files which will help in changing the names ?
CrypticVorttex said:
Update.zip will not work , they wont update from a zip file from within the system (I don't think)
I think you should update your current firmware to a v9.2.2 2018 and go from there, I think that firmware has the correct number of files which will help in changing the names [emoji106]
Click to expand...
Click to collapse
I'll try it
Enviado desde mi ALP-L09 mediante Tapatalk
rob_ertin said:
I'll try it
Enviado desde mi ALP-L09 mediante Tapatalk
Click to expand...
Click to collapse
well I can update to last android 7.1.2 ---> V9.2.2_20180827.165435_KED1-i145.
I now try to update to the first android 8.1 ---> V9.3.1_20181203.171342_KED15-i145.rar
and tell you...
editing: FAIL!!!! not update to V9.3.1_20181203.171342_KED15-i145.rar
in your opinion with update must I try?
i must to update with phoenixsuite?
Help please!
Enviado desde mi ALP-L09 mediante Tapatalk
Well I finally update it with phonesuit!
Enviado desde mi ALP-L09 mediante Tapatalk